Query Builder form Hide

Similar Questions

• An alternative Forms 6i Query Builder

  Hi gurus. I have a few users to ask questions on the "Requester" installation from the installation of forms and reports 6i package (PC have been updated and it is some software, they used previously).
  
  I've never used a query builder, but I would get something using a feature equivalent but less than 10 years if possible. Anyone who is familiar with this component and can offer suggestions?

  http://www.DevShed.com/c/a/Oracle/using-Query-Builder-in-the-Oracle-10G-Express-Edition/

  Concerning

• Request (invalid_request) of error _ __Your other could not be treated. __This could be caused by a misconfiguration or possibly a bad query is formed. For-profit support, contact network support team. __

  When you invite someone to a game of this error:

  Request error (invalid_request)

  Your request could not be processed.

  This could be caused by a misconfiguration or possibly a bad query is formed.

  For assistance, contact your network support team.

  Hi Paolombana,

  ·         Which game you try to play?

  ·         Do you get this error message when you try to invite a particular contact?

  ·         What operating system is installed on your computer?

  Method 1

  If you are using Windows Vista, you can self test network diagnostic tool and see if that fixes the problem.

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2

  If you use Windows 7, run the network troubleshooter utility.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to load the query in Crystal Designer: error "Could not load the Query builder compenent."

  Hi all
  I am using Crystal report 10 which was an upgrade of crystal 7 and 8.5
  I can open the crystal report and can do everything but I could not display the SQL query option
  It gives me an error message
  "Failed to load the Query builder compenent."
  I also reinstalled the application twice as a sysadmin even then I get this message
  Please, can someone suggest me what should I do?

  Contact technical support for Crystal Reports or watch in their forums. This is not a product of MS and is not related to the installation, upgrade and activation of Windows XP.

• Query Builder: Error Message 'Unexpected token "over" '

  Hello

  I use Version 4.1.3.20 of the SQLDev.

  I have a SQL query that contains

  count (*) over (partition of...)

  and

  listagg (col1, ',') within the Group (order in...) more than (partition of...)

  It works well in my spreadsheet calculation, but when I switch to the Query Builder, I get the following message is displayed:

  Text contains unsupported syntax.

  Parse error:

  Cannot parse the SQL query.

  Invalid SELECT statement.

  Unexpected token 'over' at line 19, pos 25.

  Ask people with disabilities Builder.

  Is this a bug or just feature which is not yet converted?

  Best regards

  Sabine

  I doubt that the Query Builder supports little advanced SQL

• PL Sql Query Builder Tool

  Hello

  Is there any Pl/Sql Query Builder tool / software that can make your life easier.

  best regards

  Sandy

  SPathak wrote:

  Hello

  I agree, that oracle Pl/Sql is powerful and gives a correct result.

  little time to create a complex query with assistant was looking for easy way.

  Sandy

  You will not learn using a GUI like TOAD tool (and I LOVE TOAD).  I always write by hand in the editor, instead of drag / drop regardless of what type of gui tool.  Only, I do not use the constructors unless you are a business analyst who has no experience of SQL.

• Query Builder

  Hello
  
  My Query Builder page is not showing the selection of the field, basically, it's empty. At first, I thought I should re-post the schema, but it does not work. I'm starting to think that it is a system setting that I need to activate it. I looked in the documentation, but didn't find anything. Does anyone know how to fix this?
  
  Thank you!
  
  Jorge

  Don't take it personally! It's a crap shoot which is online, when and how many messages are in the same time. I know when I receive emails 40 + in a day than I tend to learn a little more quickly than if there were only 10 positions through them.

  Thanks for sharing your solution, I don't know that it will get some views in the future (for those looking for forums :))!

  Take care
  -ryan

• Query Builder session parameters as a resolve to ORA-01843 (not a month valid)

  Hi all! I am new to Oracle and RDBMS, sorry for a fake question.
  I'm doing a few queries to a tutorial (10 g XE) database with Query request Builder Express 2.1000039.
  I ask the column with id, order date and order status. in a column of the date as a condition command 'where' I've wrote:

   >= to_date('23-JUN-2006', 'DD-MON-RRRR') 

  and got an error "ORA-01843: not one month valid."
  
  Then I edited the line filter condition:

   >= to_date('23-JUN-2006', 'DD-MON-RRRR', 'NLS_DATE_LANGUAGE = american') 

  and got a decent result, BUT resulting table date format DD-MM-RR.
  
  So, here are a few questions:
  1. can I change settings of session (for example

  alter session set NLS_DATE_FORMAT = 'DD-MON-RRRR'

  ) so, to use it in the query designer, before you generate a request itself and do not write "NLS_DATE_LANGUAGE = american' whenever I am inserting data to a field of date data type?"
  2. I wonder why resulting table date format is "DD-MM-RRRR. How can I get a data exactly in a date format 'DD-MON-RRRR', how I am specifying in a query?
  
  My operating system is Windows 7 Home Basic Edition, NLS_DATE_FORMAT is DD-MON-YYYY in 2 cases, the register and, respectively, in the environment variable.
  
  SQL * Plus displays all tables in query mentionted correctly, corresponding to an "ALTER SESSION...". PARAMETERS.
  
  Hope for your help, guys. Thanks for the replies!

  >
  Can I change "Application Builder-> Application-> change security attributes" without creating applications?
  >

  No you need to create an application, and as I said application-level settings determine the application only, is not a solution. Furthermore, I'm not sure that this property is available in your version of the Apex.

  I tried to change the session using SQL commandsand then I went back to the Query Builder, but it doesn't change anything, it seems different sessions are used to connect to the database.

  Yes, I'm sorry, but I have no solution for you, maybe there is a way to change this somewhere in the admin part, but I have no rights admin here and I can't test anything.

  I hope that a few experts hops on the thread ;)

• How to close the Query Builder tab?

  I did one wrong click, and now I have two tabs display on my screen a tab of the spreadsheet "" and a Query Builder tab.
  
  I don't have a big screen and the query designer does nothing in my project, he said only: "the text is not valid.
  
  How can I get rid of this Query Builder tab?
  
  Thanks a bunch

  Hello

  You know exactly what kind of behavior you see or what you mean by wrong click.

  Generator tab of queries in SQL Developer 3.0 takes really all extra space because it is located in the same panel as the worksheet and only one appears at the same time. Do you mean somehow, they got into separate panels? If so (and I've never seen happen), you should be able to close or minimize the extra Panel. For example, if you click right on the generator requests tab, is a 'close' or 'Collapse ' option appears in the context menu?

  If your question is about deleting/disabling it then, unfortunately, no options exist for this:
  3.0 SQL Developer - Query Builder tab

  Kind regards
  Gary
  SQL development team

• SqlDev 3.0 - Query Builder - Drag/Drop table - SLOW

  Has anyone else had their sql * dev 3.0 session essentially 'freeze' when you try to drag and drop a table in the query generator tab?
  
  Once the table finally appear in the Query Builder, if I remove the table and then delete it even once, it will then appear in the QB. The slow pace does not seem to happen the first time you drag each individual table.
  
  Someone at - it seen?, is there a solution?
  
  Thank you!

  His expected behavior, because the query designer must load all required table metadata and the related constraints, foreign keys etc..

  The first version of EA that actually tried to load it all on the start, but then the tool became unusable during the start-up phase of the query designer.

  If you are interested in the debate you can read in the following threads:

  Re: Poor performance on query with 3EA2 Builder
  3.0.02.37 EA1: Query Builder Performance with grand scheme?

• Visual Query Builder does not work

  I use the ColdFusion Flex Builder 3 (3.0.1.205647) extensions, and I can't use the Visual Query Builder. This is a new installation for ColdFusion8. I have configured RDS, I even test the connection successfully.
  
  I can use the RDS DataView and see the databases, click cfartgallery, for example and see the facility 'art' content of the table. No problem. Then I click the button of "Visual Query Builder", and nothing happens. The query designer does not appear.
  
  It's not a big problem until I have try running the CF/Ajax application wizard and edit the page master is supposed to open query... Builder even problem. Same here, it will not open. So I can't change anything or use the wizards at all. I get no error message, it just does nothing when I click on the button.
  
  Does anyone else have this problem? Is there a setting I'm missing or need to set up after a new installation in the CF administrator?

  Using vista?

  Click Flex and then click on run as administrator

  --
  Ken Ford
  Adobe Community Expert Dreamweaver/ColdFusion
  Fordwebs, LLC
  http://www.fordwebs.com

  "adimauro" wrote in message
  News:g8pt2n$JH1$1@forums. Macromedia.com...
  > I use the ColdFusion Flex Builder 3 (3.0.1.205647), and
  > I
  > cannot use the Visual Query Builder. This is a new installation for ColdFusion8. I have
  > have
  > RDS set up, I even test the connection successfully.
  >
  > I can use the RDS DataView and see the databases, click cfartgallery,.
  > for
  > contents of the example table and the exhibition 'art '. No problem. Then I click on the
  > "Visual Query Builder" button and nothing happens. The query designer is
  > not
  > show.
  >
  > It's not a big deal, until I have try running the CF/Ajax application wizard, and
  > edition
  > the master page is supposed to open the Query Builder... same problem.
  > Even
  > here it does not open. So I can't change anything or use the wizards at all. I have
  > don't get any what error message, it just does nothing when I click on the
  > button.
  >
  > Someone else has this problem? Is there a setting I am missing or have
  > to
  > set up after a new installation in the CF administrator?
  >

• using advanced for a graph Query Builder

  I'm trying to insert a chart based on a query in my report model. However, the data comes from a text file; so I create the object of the request for the chart of the analysis of the text file. However, the "query.name" and "query.number" fields do not change for each record in the original report query - only the first record is used. So the first card on the first page is correct, but the map never changes for all other pages (each page represents one record in the query). That's what I put in the advanced query designer:
  
  < cfset ThisQuery = QueryNew ("ItemColumn, ValueColumn") >
  ("< FileExists("D:\charts\#query.name#_#query.number#.txt ") cfif >
  < cfset ThisDataItem = 0 >
  "< cfloop file="D:\charts\#query.name#_#query.number#.txt "index ="$thisline">
  < IsNumeric ($thisline) cfif >
  < cfset ThisDataItem += 1 >
  < cfset QueryAddRow (ThisQuery) >
  < cfset QuerySetCell (ThisQuery, "ItemColumn", ThisDataItem) >
  < cfset QuerySetCell (ThisQuery, "ValueColumn", $thisline) >
  < / cfif >
  < / cfloop >
  < / cfif >
  
  So basically the file name is set according to the first row (result) of the report query, but then the file name (and thus the graph) never change even if all other fields based on a query on my page change correctly (all other queries. BlahBlah fields to update correctly). Is this a bug? I don't think I was doing anything too crazy.

  Phew! I found a really great solution, which has a ton of uses.

  First of all, like I should have made, ANY variable in a coldfusion tag will be figured out when the report is called, not for each query result. In other words, the query.xxx or report.xxx or anything that's NEVER going to work properly inside a tag, not even in a report feature or Advanced Query Builder.

  However, there is a simple way around this. Simply make a function in relation to the arguments and in the editor of your field expressions calling the function, and pass query variables or State:
  #report.yourFunction (query.field1, query.field2) #.
  You can do all sorts of magic of Coldfusion function and return any shape desired result.

  For my particular example (creating a query object for a chart to insert dynamically), I had to add a step is not so obvious: create the object of my application with a shared (in this case, the scope of the request) scope, otherwise the variable is trapped in the scope of the function. So it was my solution: I had a chart with the option 'Print when' my function call "getChartQuery" (from query variables, of course). The function built "Request.ThisChartQuery" and returns True if there's something in there (the logic of "Print when" uses the Boolean value of whether to display the graph or not). My card is always based on a query, but the Advanced Query builder has NOTHING in it, with the exception of the variable that contains the query object ("Request.ThisChartQuery").

  There is another solution, I found where the report function makes all of the chart (using cfchart tags, etc.) and saves to a PNG file and then returns the path to the image. Then, you simply add an image field to the report, and you use the expression builder to call the function. Well, hope this has helped someone!

  "EDIT: the references are" " http://www.adobe.com/go/ee54cc6" and " http://www.houseoffusion.com/groups/cf-talk/thread.cfm/threadid:40786"

• The Web-based SQL Query Builder

  Hello
  
  I have a generator of SQL query that allows users to create their own application graphically.
  
  I have something I could use to do?
  
  Thanks a lot for your help
  Jko

  Hello

  I hope this help you start your applications to Query Builder
  http://HTMLDB.Oracle.com/pls/OTN/f?p=18326:7:1636417102512483:P7_ID:161

  BR, Jari

  Edit:

  And this
  http://HTMLDB.Oracle.com/pls/OTN/f?p=18326:7:1636417102512483:P7_ID:1222

  Published by: jarola October 29, 2009 12:30 AM

• 2.1 EA1: Query Builder does not update the query to display the results

  When using the query designer, if you click view results to see the results of the current query, then return to "Select columns" or the tabs 'Create a Where Clause' change the query, the "View results" tab shows again the results of the original query, even if no tables or columns of the original query occurs. By clicking on the button run the report or by setting a refresh interval has no effect.
  
  On another note, the query designer again is not reentrant, because you cannot select (highlight a part where cursor in) a query, and then open the query for this request of change graphically Designer.

  Sentinel,

  The problem is known and is listed in the known issues in the release notes for the first users. We hope to have this sent to production.

  Returning Query Builder is always on our list of things to do. We intend to rewrite the Query Builder and examine a number of requests related to this function. I'm hoping to make it a priority for the next release.

  Sue

• Question about Oracle Query Builder

  Hi all
  
  I'm under Query Builder Version 6.0.7.1.0 to execute a SQL statement. He returned 19200 lines. When I try to export data in the CSV file, it exports only 19000 lines and gives the following error:
  
  OBE-15502: can have only 19000 lines per document
  
  Anyone know the cause of the error above? This is a limitation of the export of the query designer or I have some problems of configuration?
  
  Thank you
  Zahid

  I know the 16000 (not 19000) limit and this limit is coded hard and cannot be changed.

  Werner