Query on the dynamic view v$ parameter

Similar Questions

• Prepares the query via the Inline view

  Pls help to prepare a query i can extract the following data through view inline (IE, except using the UNION):
  
  1. the SELLER who works in deptno # 30
  2. the MANAGER working in deptno # 20
  
  Department # 30 both SELLER and MANAGER work same Department # 20 both SELLER and MANAGER work.
  
  I want to go get sole MANAGER of Department # 20 and only the SELLER in Department 30.
  
  
  I can retrieve the desired data above by 'UNION' but I don't know if the above data can be searched other than 'The UNION' as INLINE mode.
  

  INSERT INTO EMP
  VALUES
  (7369,'SMITH','CLERK',7902,'WEDNESDAY, DECEMBER 17, 1980',800,NULL,20)
  /
  INSERT INTO EMP
  VALUES
  (7499,'ALLEN','SALESMAN',7698,'FRIDAY, FEBRUARY 20, 1981',1600,300,30)
  /
  INSERT INTO EMP
  VALUES
  (7521,'WARD','SALESMAN',7698,'SUNDAY, FEBRUARY 22, 1981',1250,500,30)
  /
  INSERT INTO EMP
  VALUES
  (7566,'JONES','MANAGER',7839,'THURSDAY, APRIL 02, 1981',2975,NULL,20)
  /
  INSERT INTO EMP
  VALUES
  (7654,'MARTIN','SALESMAN',7698,'MONDAY, SEPTEMBER 28, 1981',1250,1400,30)
  /
  INSERT INTO EMP
  VALUES
  (7698,'BLAKE','MANAGER',7839,'FRIDAY, MAY 01, 1981',2850,NULL,30)
  /
  INSERT INTO EMP
  VALUES
  (7782,'CLARK','MANAGER',7839,'TUESDAY, JUNE 09, 1981',2450,NULL,10)
  /
  INSERT INTO EMP
  VALUES
  (7788,'SCOTT','ANALYST',7566,'SUNDAY, APRIL 19, 1987',3000,NULL,20)
  /
  INSERT INTO EMP
  VALUES
  (7839,'KING','PRESIDENT',NULL,'TUESDAY, NOVEMBER 17, 1981',5000,NULL,10)
  /
  INSERT INTO EMP
  VALUES
  (7844,'TURNER','SALESMAN',7698,'TUESDAY, SEPTEMBER 08, 1981',1500,0,30)
  /
  INSERT INTO EMP
  VALUES
  (7876,'ADAMS','CLERK',7788,'SATURDAY, MAY 23, 1987',1100,NULL,20)
  /
  INSERT INTO EMP
  VALUES
  (7900,'JAMES','CLERK',7698,'THURSDAY, DECEMBER 03, 1981',950,NULL,30)
  /
  INSERT INTO EMP
  VALUES
  (7902,'FORD','ANALYST',7566,'THURSDAY, DECEMBER 03, 1981',3000,NULL,20)
  /
  INSERT INTO EMP
  VALUES
  (7934,'MILLER','CLERK',7782,'SATURDAY, JANUARY 23, 1982',1300,NULL,10)
  /
  INSERT INTO EMP
  VALUES
  (100,'SALAM','SALESMAN',7698,'FRIDAY, FEBRUARY 20, 1981',1600,300,20)
  /
  INSERT INTO EMP
  VALUES
  (101,'KARIN','SALESMAN',7698,'SATURDAY, FEBRUARY 21, 1981',1250,500,20)
  /
  INSERT INTO EMP
  VALUES
  (102,'RAFIQ','SALESMAN',7698,'SATURDAY, FEBRUARY 20, 1988',1250,1400,20)
  /
  INSERT INTO EMP
  VALUES
  (103,'JABBAR','SALESMAN',7698,'WEDNESDAY, FEBRUARY 20, 1980',1500,0,20)
  /
  INSERT INTO EMP
  VALUES
  (500,'RAHIM','MANAGER',7839,'THURSDAY, DECEMBER 16, 1971',2975,NULL,20)
  /

  Thank you.
  
  Sharif
  
  Published by: user13094274 on May 8, 2010 06:49

  Am I wrong?

• Permission to access the dynamic views v$ users not sysdb

  Hello

  I am a beginner in Oracle and this is my first post in this forum, so please be gentle

  I am trying to give some capacity on certain points of view a user not sysdba like this:

  What worked well:

  create view V_SYS_SESSION_LONGOPS as (select * from v$ session_longops);

  GRANT SELECT ON V_SYS_SESSION_LONGOPS TO myuser.

  What has not worked:

  create view V_SYS_SQL as (select * from v$ sql);

  GRANT SELECT ON V_$ SQL to myuser.

  GRANT SELECT ON V_SYS_SQL TO myuser.

  The problem is that these SQL commands are accepted by oracle, but my user does not see this second view (while the first works very well).

  I did something in a wrong way?

  Thank you

  What is the error?

  Having the MYUSER account run select * from SYS. V_SYS_SQL

  Hemant K Collette

• Change a query to be dynamic

  Hello
  
  Query of the following view shows the months of the year I got it with the help of a Member here Zerathul.
  Well, I put it in a view, select month_code and month_desc in a report.
  

  CREATE OR REPLACE VIEW FINANCIAL_YEAR_MONTHS
  (MONTH_CODE, MONTH_DESC)
  AS 
  select  to_char(add_months(FROM_DATE,rn-1),'MM/YYYY') as financial_month, 
  month_desc
  from (select * from cde_fin_year where fin_year_code = *2007*)
   cross join (select rownum rn from dual connect by rownum <= 12) x
   join cde_month on (cde_month.month_code = to_char(add_months(FROM_DATE,x.rn-1),'MM'))
  order by x.rn;

  All I want to do is make a dynamic statement not only specified for the year 2007, but throughout the year if I want to change this line to accept any parameter as follows:
  

  from (select * from cde_fin_year where fin_year_code = *2007*)

  Kind regards
  
  Abdetu...

  from (select * from cde_fin_year where fin_year_code = * 2007 *)

  Try this->

  from (select * from cde_fin_year where fin_year_code = '&code')
  

  Kind regards.

  LOULOU.

• Do not to use the materialized view

  I wonder if we've already created a materialized view, can we prefer not to use this point of view, materialized for a query? I want to say can we determine if a query uses MV and other queries don't use MV?  Thank you.

  Hello Indra,

  I'm not completely sure about that, but you can read (with examples) concerning the indications- NO_REWRITE and REWRITE

  Text over the doc links:

  Council of REWRITING:

  The REWRITE Council instructs the optimizer to rewrite a query regarding the materialized views when possible, regardless of cost. Use the REWRITE trick with or without a display list. If you use REWRITE with a view list and the list contains an eligible materialized view, then Oracle uses this view regardless of its cost.

  Tip NO_REWRITE:

  The NO_REWRITE Council tells the optimizer to disable the rewrite of the query to the query block, of the substitution of the definition of the parameter QUERY_REWRITE_ENABLED .

  Be aware! -The NOREWRITE suspicion has been deprecated. Use the NO_REWRITE hint instead.

  Read here: setting QUERY_REWRITE_ENABLED

  -Nordine

• Unit test: is there a way to make the dynamic query of the value of running after the boot process?

  I wonder why the dynamic value query is executed before the boot process? Logically, it makes sense to run after them.

  For example, I test a stored procedure that is supposed to delete a record, and I'd like to create this test report should be deleted as part of the startup process before execution of the stored procedure call to delete this test record. Apparently the dynamic query of value not returns not the test report in as long as the query parameter to call the stored procedure under test, which makes me think that is executed before the startup process of design...

  Please advise...

  Thank you

  Val

  As this thread does no traction/attention of the team of SQL Developer for a while, I had to submit a request for formal improvement on metalink:

  RE: 19834977 - IN THE UNIT TEST REQUEST TO ALLOW TO CHANGE THE ORDER OF EXECUTION OF THE START OF THE PROCESS

  Thank you

  Val

• Dynamic problem with lookup-query for the purpose of resource request

  Hi all
  I need to set up several IOM user exchange mailboxes, I can set up AD account and account of the mailbox without any problem, but only for the first ad and Exchange account. For the second and third, etc. I get the error: "Invalid login name" during Exchange of account provisioning. I discovered that this problem exists with Exchange Connector - it is not able to collect correct GUID. So in my xml Dataset I use dynamic query Lookup to select manually correct Alias, the login name and GUID. The query for the GUID is the sequel (I cloned RO for AD and Exchnage):
  
  AttributeReference available-in-bulk = "true" length = "32" widget = 'search query' type = 'String' attr-ref = "Object GUID" name = "Object GUID" >
  * < lookupQuery search-query = "select distinct UD_KFUSER_OBJECTGUID GUID, ud_KFUSER_uid like UD_KFUSER UD_KFUSER, orc orc Login, sta sta where UD_KFUSER.orc_key = orc.orc_key and orc.usr_key = ' $Form data." Take ' and UD_KFUSER. "UD_KFUSER_AD = 27 and orc.orc_status = STA.sta_status AND STA.sta_bucket! = 'Cancelled'" display-field = "GUID" save-field = "Object GUID" / > *.
  * < / AttributeReference > *.
  
  
  My questions are:
  
  1. I have to type * to run the query in the user interface, without * I got error:
  
  + < 17 February 2012 11:12:22 THIS > < error > < oracle.adfinternal.view.faces.config.ric +.
  h.RegistrationConfigurator > < BEA-000000 > < ADF_FACES - 60096:Server Exception durin
  PPR, #10 g
  oracle.iam.platform.canonic.base.NoteException: an error occurred during executin
  g the search query.
  to oracle.iam.platform.canonic.agentry.GenericEntityLookupActor.perform)
  GenericEntityLookupActor.java:337)
  Is this right?
  
  2. when I got correct values (from the search query) - they are missing on the details of the application and form of RO - what Miss me?
  
  I use OIM 11.1.1.5, in my xml dataset I use correct attr-Ref (labels), when I type the values manually, they are propagated to form RO and Exchange mailbox is created.
  Best
  MP

  I not had no problem when writing search query.
  This works very well for me.
  The request will be filled for the field, so why choose *?
  I used as
  

• Dynamically Open VI and him pass a parameter to the dynamically open VI

  I want to open a vi dynamically, at the same time I have to pass a parameter to the dynamically open VI. Is it possible to do?

  Thank you

  Chrystelle Roy

  Passionate about LabVIEW

  Check here https://zone.ni.com/reference/en-XX/help/371361M-01/lvconcepts/dynamic_loadcall_vis/

• Collection of the dynamic query

  Hi All-

  I'm trying to get the value of the collection through the dynamic query but I am facing some problem please let me know that I hurt.

  Created a function like below to run the dynamic query to select statement

  create or replace FUNCTION rfunGetColumnValue (
                ColumnName VARCHAR2,
                TableName  VARCHAR2,
                DefaultValue OUT VARCHAR2,
                Criteria VARCHAR2)
         RETURN VARCHAR2
  IS
         ReturnValue VARCHAR2 (32767 byte) ;
         Stmt        VARCHAR2 (32767 byte) ;
  BEGIN
         stmt := 'begin        
  select '|| ColumnName || ' into  :1  from table(:2) ' ||NVL
         ( Criteria, ' ') ||
         '       
  Fetch First Row only ;        
  EXCEPTION                                   
  WHEN OTHERS THEN                                          
  :2 := SQLERRM;
  end;'
         ;
         dbms_output.put_line (stmt) ;
         EXECUTE IMMEDIATE stmt USING OUT ReturnValue, OUT DefaultValue;
         --select Valueinto into Returnvalue from dual;
         RETURN ReturnValue;
  END;
  

  Now, I created a folder in the Package

  create or replace PACKAGE Collection_PKG
  is
  type Bank_rec is RECORD
  (
  SNO           NUMBER(10),    
  BANKID        NUMBER(5),    
  BANKNAME       VARCHAR2(50),    
  BANKSC         VARCHAR2(50),    
  ADDEDIT       varchar2(1),    
  COMPID        number(5),    
  ISBULK        number(1),    
  ROWNO         number(10),    
  ERROR         VARCHAR2(500)  
  );
  
  
  TYPE Bank_tbl IS TABLE OF Bank_rec;
  --type Bank_cur is ref cursor return Bank_rec;
  
  
  end Collection_PKG;
  
  end Collection_PKG;
  end Collec
  tion_PKG;
  

  Now, when I'm Trying the code below

  DECLARE
    V_EXECQUERYPARAM XMLTYPE:= XMLTYPE('<QueryParam>
    <BankXML>
      <Bank>
        <BankID>0</BankID>
        <BankSC><![CDATA[RCB]]></BankSC>
        <BankName><![CDATA[Royal challenger Bank]]></BankName>
        <IsBulk>0</IsBulk>
        <AddEdit>A</AddEdit>
      </Bank>
    </BankXML>
  </QueryParam>');
  BEGIN
   Rspbanksave(
      v_SPParamList => V_EXECQUERYPARAM  );
  
  
  END; 
  

  create or replace PROCEDURE rspBankSave (
                v_SPParamList XMLTYPE DEFAULT NULL)
  IS
         V_Addedit VARCHAR2 (1 CHAR) ;
         Bank_tbl Collection_PKG.BANK_TBL := Collection_PKG.BANK_TBL () ;
  BEGIN
         
         SELECT Row_number () OVER (ORDER BY 1),
                XT.BankID,
                XT.BankName,
                XT.BankSC,
                XT.AddEdit,
                v_CompID,
                XT.IsBulk,
                CAST (0 AS NUMBER (5)),
                CASE
                       WHEN MBank.BankID IS NOT NULL
                       THEN
                              CASE
                                     WHEN XT.BankSC     = MBank.BankSC
                                        AND XT.BankName = MBank.BankName
                                     THEN 'R104|Entry Already Exist,R114|Short Code Already Exist'
                                     WHEN XT.BankSC = MBank.BankSC
                                     THEN 'R114|Short Code Already Exist'
                                     WHEN XT.BankName = MBank.BankName
                                     THEN 'R104|Entry Already Exist'
                              END
                       ELSE NULL
                END Bulk collect
         INTO   Bank_tbl
         FROM   XMLTABLE ('//QueryParam/BankXML/Bank' PASSING v_SPParamList COLUMNS BankID NUMBER (5)
                PATH 'BankID', BankName                                                    VARCHAR2 (
                50) PATH 'BankName', BankSC                                                VARCHAR2 (
                50) PATH 'BankSC', AddEdit                                                 VARCHAR2 (
                1) PATH 'AddEdit', IsBulk                                                  NUMBER (1)
                PATH 'IsBulk') XT
         LEFT JOIN MBank
         ON     XT.BankID   != MBank.BankID
            AND v_CompID     = MBank.CompID
            AND (XT.BankSC   = MBank.BankSC
             OR XT.BankName  = MBank.BankName) ;
         v_TotalRowCount    := SQL%ROWCOUNT;
  
  
  
  
  
  
         IF (v_TotalRowCount > 0) THEN
                
                       BEGIN
                             V_Addedit:=rfunGetColumnValue (ColumnName=> 'Upper(AddEdit)',TableName=>'table(Bank_tbl)',DefaultValue=>'',Criteria =>'');
                       END;
                       --SQL Code here
                
         END IF;
         
  END rspBankSave;
  
  
  
  
  
  
  
  

  As I've suggested before:

  To get the name of the table the column

  and as others have:

  Type global temporary Tables vs. table

  If you give more context, more information about the bigger picture, more information about what you're trying to do and why you're going down the road you go down, you can return more useful information. But you seem reluctant to do.

  For the moment, your recent posts seem to just raise the same type of question - why are you doing this?

  The normal way to return data to a client is a refcursor.

  It is the most effective way.

  Not through collections that you seem to be put on the must-do approach.

• Elapsed time for the materialized view vs Master table query

  Hello all;
  
  Small confusion about time up for the vs Master materialized view table query
  
  

  SQL > select count (*), sum (quan_sold), sum (amt_sold) of the sale;

  COUNT (*) SUM (QUAN_SOLD) SUM (AMT_SOLD)
  6000000 12000000 720480000
  Elapsed time: 00:00:30.54
  

  SQL > create materialized view mv1
  2 activate the rewrite of the query as
  3. select count (*), sum (quan_sold), sum (amt_sold) of the sale;

  Materialized view created.
  Elapsed time: 00:00:01.45
  

  SQL > select count (*), sum (quan_sold), sum (amt_sold) of the sale;

  COUNT (*) SUM (QUAN_SOLD) SUM (AMT_SOLD)
  6000000 12000000 720480000
  Elapsed time: 00:00:00.01
  
  Please see the three cases "Elapsed Time"...
  
  When comparing other cases.
  1. my query takes long time (30.54), extraction of data from the sale
  2. create a materialized view takes less time (01:45) why?
  
  Source: http://uhesse.com/2009/07/08/brief-introduction-into-materialized-views/

  >
  Small confusion about elapsed time for the materialized view vs Master table query

  SQL > select count (*), sum (quan_sold), sum (amt_sold) from the sale.

  COUNT (*) SUM (QUAN_SOLD) SUM (AMT_SOLD)
  6000000 12000000 720480000
  Elapsed time: 00:00:30.54

  SQL > create materialized view mv1
  2 activate the rewrite of the query as
  3. select count (*), sum (quan_sold), sum (amt_sold) of the sale;
  Materialized view created.
  Elapsed time: 00:00:01.45

  SQL > select count (*), sum (quan_sold), sum (amt_sold) from the sale.

  COUNT (*) SUM (QUAN_SOLD) SUM (AMT_SOLD)
  6000000 12000000 720480000
  Elapsed time: 00:00:00.01

  Please see the three cases "Elapsed Time"...

  When comparing other cases.
  1. my query takes long time (30.54), extraction of data from the sale
  2. create a materialized view takes less time (01:45) why?
  >
  Many queries take less time the second time you run them. After the first performance, there may be many, if not all, lines in the buffer cache. Then the second round will not make any or all e/s physical but will obtain data from the buffer cache.

  Also, you haven't checked that the MV was even used for the second run.

  Drop the MV and make the query several times and means of the time. Then create the MV and do the same thing.

• Dynamic SQL query in the DB adapter

  Hello
  I want to use the following custom SQL query in the DB adapter:
  
  SELECT EMP_ID, EMP_NAME, EMP_LOCATION FROM EMP WHERE EMP_ID IN (#iNPUT_PARAMETER)
  
  the problem I'm facing is that I don't know at the time of the development that EMP_ID how much will be passed to the process so that I can not use the input parameter specific number. I cannot use it IN the query within which statement I concatenate all the EMP_ID separated by comma and passed under INPUT_PARAMETER, but when running, he read the full concatenated string as a single string rather than identify them as a list of different: with comma separation. could someone help me in this case
  
  Thank you
  Sunil

  Use the following query with two parameters. Build the string with delimiter when running and pass this string and delimiter to query... (in this example, the input value would be the same for both Delimiter1 and Delimiter2.)

  Select * from EMP WHERE deptno IN (SELECT SUBSTR (STRING_TO_TOKENIZE, DECODE (LEVEL, 1, 1, INSTR (STRING_TO_TOKENIZE, SEPARATOR, 1, LEVEL-1) + 1), INSTR (STRING_TO_TOKENIZE, SEPARATOR, 1, LEVEL)-DECODE (LEVEL, 1, 1, INSTR (STRING_TO_TOKENIZE, SEPARATOR, 1, LEVEL-1) + 1)) FROM (SELECT #StringToTokenizer | #Delimiter1 AS STRING_TO_TOKENIZE, #Delimiter2 AS DELIMITER FROM DUAL) CONNECT BY INSTR (STRING_TO_TOKENIZE SEPARATOR) ((, 1, LEVEL) > 0)

  Thank you
  -Sreeny

• Join the query in a dynamic list of values query

  I have a join query in a dynamic list of values query. The value does not return a value of text, but rather the value of the ID.
  
  Is it possible to use a join query in a dynamic list of values query?
  
  For example... in the query below, I expect to see ename in the drop-down list, but I see class_emp_id.
  
  Select b.ename d, a.class_emp_id r
  of class_emp a, b of the emp
  where a.class_cat_id =: CURR_CLASS_CAT_ID
  and a.emp_id = b.emp_id
  order by 1
  
  Thank you
  Reid

  Hey Reid,

  The structure of the pairings/value of the item is incorrect - it should be: item1, item2, etc.: value1, value2, etc, so:

  ' f ? p = & APP_ID.: 50: & SESSION. ": P50_LP_ID, P50_LP_NAME, CURR_CLASS_CAT_ID: #LP_ID #, #LP_NAME #, #CLASS_CAT_ID #"

  I guess that CURR_CLASS_CAT_ID does not use the prefix P50_?

  Andy

• ADF how can I run a parameter query when the page is displayed

  Hello
  I use web ADF 11 g
  I need to run a parameter query when the page is displayed
  Thank you

  protected DCIteratorBinding getItrtBindings (String binding) {}
  DCIteratorBinding outIterBinding is getBindingsForDCB () .findIteratorBinding (binding);.
  Return outIterBinding;
  }

  public DCBindingContainer getBindingsForDCB() {}
  If (this.bindings == null) {}
  FacesContext fc = FacesContext.getCurrentInstance ();
  This.Bindings = (DCBindingContainer) fc.getApplication (.evaluateExpressionGet(fc,"#{bindings}",DCBindingContainer.class));
  }
  return (DCBindingContainer) this.bindings;
  }

  BindingContainer links protected;

  public BindingContainer {} getBindings()

  Return this.bindings;
  }

  public void setBindings (links BindingContainer) {}
  This.Bindings = links;
  }

• Inside af AF:selectOneChoice: table sometimes does not display the appropriate values, based on the results of the query of the view object

  Hello

  I use jdev 12.1.2.

  I have a few components of af: selectOneChoice that is contained in an af:table element.  The table is extracting lines from database and display data.  Now here's the weird part: sometimes the component of selectOneChoice will have the correct value selected, and other times it will be just left unchecked.  I can verify that the data in the object view lines are indeed correct after I request them.  The LOV for soc components are properly set up (some are configured as static list display objects and some are set up as model driven lists based on display objects).  I have just completely puzzled me as to why they work sometimes and then not work at times even though I am following the exact same steps to reach that point in my application.  Someone at - he never meets this problem before?

  Thanks for reading.

  Problem solved!

  For anyone having this problem in the future: do not try to do a partial trigger on a table that is not in the visible panelTab.  The problem is that when my view criteria applying, I was refreshing the TWO tables.  This caused that was not visible to lose the selectOneChoice selection, while the other table was very good.  Remove the partial relaxation for the table that was not visible caused the data to be maintained properly during the exchange between the tabs and change the view criteria.  Thanks for the help again Ashish, stumbled on the real root of the problem, after following some of your suggestions.

• How to pass the dynamic parameter to a function of database in OBIEE

  Hello
  
  I have a requirement like this. I need to create a report in OBIEE which stood in the discoverer. Now in the Scout report there is a calculated item in the worksheet based on the pkg.functions database. The user setting which gives the runtime parameters are then passed to the discoverer calculated elements dynamically. But I am not able to do this in OBIEE answers.
  
  Can someone tell me step by step how I can able to transmit the values of user setting selected in the level of response OBIEE.
  
  The example:
  
  GET_COMM_VALUE_PTD ('cost AFE & commitment'. ID of the AFE,: ' name at that time (AFE) ', 'cost of the AFE & commitment '. Salt of data, 'cost of the AFE & commitment '. The org ID)
  
  GET_COMM_VALUE_PTD - database function
  ('Cost AFE & commitment'. ID of the AFE,: ' name at that time (AFE) ', 'cost of the AFE & commitment '. Salt of data, 'cost of the AFE & commitment '. org Id - settings...: "period Name (AFE)" is the dynamic setting of the execution by the user.
  
  
  Help, please.
  
  Thank you
  
  Titas

  Hello

  Please see this link.

  http://satyaobieesolutions.blogspot.in/2012/08/database-evaluate-function-database.html

  This can be help you.

  Thank you
  Satya