question about custom classes

Similar Questions

• More questions about custom asynchronous device

  I am trying to create a custom asynchronous device for VeriStand and have the following questions:

  (a) at what rate entered in the course of analysis and data channel pushed into the FIFO of the custom device entry? The scanning speed depends on if the input channel is mapped to a control of workspace object or if it is mapped to an output of the simulation model (.dll file)?

  (b) at what rate the VI real-time asynchronous custome device running? Is it at the same rate as the primary control loop rate? Can I change the rate of implementation of a custom device and how?

  (c) I have a quad-core PXI time real platform. How can I connect the device customized to a specific processor, like what you do with a simulation model (.dll file) in the definition of system file?

  Thank you in advance.

  Data FIFO

  The rate at which data are pumped on your meter is static and has nothing to do with the question of whether the workspace is connected, or if a model is mapped to one of your channels. By default, data are pushed in input of your Custom FIFO each iteration of the loop of primary control. If the FIFO is full, the oldest data packet is crushed. In addition, by default, outings THAT FIFO is controlled ever iteration of the loop of primary control. You can, however, use the NI VeriStand - Set custom decimation of device to mark a property on your customized device that will tell the system its decimation expected in the. If you set a decimation of 10, for example, the primary control loop will be send every 10 iterations of new data and check for new data out FIFO only every 10 iterations. This can help reduce the load of the processor in your system if you do not need updates that often.

  Similarly, you can use the NI VeriStand - Set of deep FIFO to control the depths of the FIFO of your entries and exits FIFO respectively. By default, both have depth 1.

  Delivery rate

  The rate at which your custom device runs depends on how set you up. You can for example, having your Custom asynchronous device uses its own schedule and run at a pace totally independent of the system. Your VI could have regular while loop with a 10ms timer, for example, or it could be based off some hardware device timing.

  Alternatively, you can choose yourself closely synchronize with the primary control loop. This by registering using a property that your Custom device has a timed loop that will use the clock of the device. The unit's clock is a source of synchronization that is checked each iteration of the loop of primary regulation after Custom peripheral FIFO have been updated. You sign up for this simply by calling the NI VeriStand - Set loop property Type specifying Timed loop to loop type and use peripheral clock be true. Then, as the VI model, thread just the clock of the camera in your calendar input source for the timed loop. If you have specified a decimation factor, as mentioned above, you should probably also to use this factor as your dt. This means that if you have a decimation of 10, you only run your timed loop 10 all the graduations of the source of synchronization clock of the device.

  Another simple way to synchronize closely with the primary control with a few problems loop is simply base your timing off the coast of the availability of new data in your entries or exits FIFO. To do this, you can simply use regularly to loop and then just wire - 1 for FIFO wait times. Then your custom device will run as soon as the data are produced and consumed by the system.

  Specification of a processor

  There is no property integrated for the allocation of the processor, but it will be very easy for you to implement yourself. You can specify the processor to run on in the Explorer system by creating a custom using NI VeriStand - property set the property of the element. For example, you could define a property of I32 entitled 'Treatment', with-2 meaning auto-affectation and any non-negative value indicating an index of specific processor. Set this property in one of your device in System Explorer configuration pages and then read the property in VI of pilot in the engine using NI VeriStand - get the property of the element. Then just wire up the value of the property at the entrance of affinity processor on your timed loop. However, you should always check that this processor is on target. Otherwise the timed loop will report an error and abort. It's exactly what we do for models in-house.

• Question about custom stores

  I implement a custom in my app Store... I want to welcome the code on a server to show the information dynamically so that I will not need to update the application whenever I need to make a change...

  The Question is... If I want to show the leaflets that are controlled by a server (using a Login and a password) right on my custom sotre, it is possible to do it with the current custom Adobe API or I can show only folios that could purchases on the Apple Store?  I ask this question because a folio that isn't from Apple Store (say an In - App purchase) shows me a sign of error because I control access to it my system of law.

  I enclose a photo if you can help me with this.

  Thanks for your help

  

  Yes, it is possible. You just hide the folios where State = FolioState.INVALID or FolioState.UNAVAILABLE. After that the person logs in, folio.updatedSignal will be triggered if the State has changed. If the State is > FolioState.UNAVAILABLE then show the folio.

• Question about custom components States

  Hi all.

  I have a question that I can't find an answer to any place.

  I created a screen edition, with two States, "view" and "Edit".  For 'view', the fields are not editable.  If the user presses the button "Edit", all fields become editable, as 'Edit' passes to the State of 'Edit' and all the fields to say "editable.edit = 'true'". "  It works very well.

  My question is a custom component that is contained in this form.  There is also two States, with the same names.  I want to spend the custom also editing mode component.  But I can't seem to do.  If I access the field by "component.state ='edit" "", which generates an error.

  This must be a fairly common thing to do.  I'll use this custom as well as screens component (I hope) so I don't want to lose him if I can avoid it.

  Or maybe that I approach the problem correctly?

  Any help or insight would be appreciated.

  Thank you

  Tom

  You should be able to define the State through the currentState property:

  If your custom component has all the same States as the Application then you may find it useful to link the current component State to the current state of the application:

• Question about customizing the OAAttrValException

  I have coded in EO validateEntity() validations.
  
  They work properly with my custom exceptions message.
  
  OT validation code:

      if (getObjectCode().length() < 4)
      {
        MessageToken[] ObjectCodetokens = { new MessageToken("DIGIT", "4") };
        throw new OAAttrValException (
              OAException.TYP_ENTITY_OBJECT,
              getEntityDef().getFullName(), // EO name
              getPrimaryKey(), // EO PK
              "ObjectCode", //attribute name
              getObjectCode(), // bad attribute value
              "XX", //message application short name
              "XX_FWK_DIGIT_REQUIRED",
              ObjectCodetokens); // message name
      }

  The exception indicates as follows: at the top of the page, if the entry of object code is less then 4 digits

  Row 1 ObjectCode - 4 digit numeric required.

  My question is, is there a way to get rid of the 'line 1 ObjectCode -' and just show "4-digit digital required."?
  (Note: ' Row 1 ObjectCode - ' is no not part of my custom exception message.)
  
  Thank you.

  Yes, it's give and take only... :)

  Thank you
  -Anil
  http://oracleanil.blogspot.com/

• Question about the class of a card SDHC for a Camileo H10

  Hello
  I have recently purchase a Camileo H10 and I want to know what happened if I use a SDHC class 4 card.
  He decrease the perfomance of the camcoder?

  Than you.

  It depends on the video bandwidth.

  Class 4 = 4 MB/s minimum.

  If the video stream is greater than 4 Mbps, there may be a performance issue.

• Question about 'Customer of Toshiba online product information'

  Hello
  my computer (Satellite A100) asks me to download "the new version of Toshiba Online product information Client", asks me to follow the www.toshiba-tro.de link but I can't find anything like that here.
  I just have no idea how do it, could you help me please.

  Hello

  Never heard of him, and it doesn't look like it s important for your machine. I think that it s just a piece of software that wants to learn about the new features.

  If you have the opportunity then go to "Add/Remove software" in the "Control Panel", and then delete. Believe me: Don t you need...

  Otherwise, you can also try the [European drivers download page | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp] to check if you can get the latest version of this application.

  See you soon

• Question about customizing the content form of Check-In Info page

  Is it possible to customize this page outside of a component? I know that the page is auto generated and I was wondering if it was possible to use as iDoc stuff on the rules page.

  as long you have defined to include it in a componet and using the right name to "Include personal use", there should not be any problems.
  what you could try is...
  set include "my_custom_include" as follows...
  <@dynamichtml my_custom_include@="">
  <$if not="" isuploadfieldscript$="">
  My custom label
  
  
  <$endif$>
  <@end@>

  Create a check-in and in the content server hcst file containing the following lines of code...
  

  
  <$include my_custom_include$="">
  

  Watch the web rendering of the above check-in and see if the html in your include code is displayed.

  If all good, you can add my_custom_include 'Use Custom include' to your domain in profile rules.

• Questions about custom DataGridColumn component converter

  Hey guys,.

  I am very new to flex, but he really likes.

  Part of my task is to display data with the DataGrid control. Sounds very simple, isn't? However, the data themselves are a mess, and he needs a custom code to make it presentable. My problem is the following:

  one of the columns is supposed to be a positive number. If the number is less than 0, then do not display or display an empty cell. I tried in several ways:

  1 tried to use < mx:Text text = "{((data. TotalGFA < 0)? "": data. " TotalGFA)}"/ >. He complains unmatched ' > '.

  2 tried to use a function < mx:Text text = "{getPositiveNumber (data." TotalGFA)}"/ >. He complained of function not defined

  3 tried extending mx:Text and the substitution of the text box. But I couldn't find any help.

  Is this possible? How to make it work?

  Thank you

  C

  You can simply use the DataGridColumn labelFunction.

  You have problems with your second appearance being itemRenderers

  scope differently from the parent app.

• Questions about Failver customer and rapid failover

  have some questions about customer and quick Faiolver of Oracle Database HA failover. Before asking these questions, I want to explain my environment. Here are the details.
  
  
  
  -We have two physical locations called "ABC" and "PQR".
  -ABC is the main site.
  -PQR is the backup site.
  -In ABC, we have the database to Oracle RAC (11.2.0.2) with two nodes.
  -In the PQR, we have only one stand-alone server (11.2.0.2) database with ASM. This isn't a RAC.
  -Data Guard has been configured between ABC and PQR and it works as expected.
  -Please note that we have a license for Active Data Guard.
  -We have products of Oracle Identity Management to ABC and PQR and they will use the RAC database as a primary database that is in the CBA.
  -We have not yet set up a Data Guard Broker.
  
  We want to achieve under objectives:
  
  
  Objective 1:
  -------
  
  Whenever primary CARS down completely, standby database becomes a primary database AUTOMATICALLY and it should allow the read/write operation.
  I guess it's called 'Fast Failover'. Please let me know if I'm wrong.
  
  Issues related to the:
  
  -To do this, I need to set up Data Guard Broker so that this standy database becomes primary when CARS go down completely with a power outage, planned or not.
  -Let's say that CARS falls does completely, how long take Data Guard Broker do standby db as primary.
  -What the client application / which is already connected to the CARS.
  -Let's DB standby became as primary and after some time if RAC comes back, keep data automatically becomes the primary role of RAC?
  
  
  Objective 2:
  --------
  
  As I explained above, all products Oracle IDM and applications to speak to the RAC database, what do know only on the RAC database, which is the main. They are not aware of the pending database.
  
  -Whenever a client session is underway with the primary database of CARS if CARS completely falls down, we would like to wait until the client session should get transferred datbase standby without losing session information. However before that happens, standby database should become primary because the client session can perform write operations.
  
  -Whenever a client attempts to connect to the primary CARS and assumes that the cab is completely down, we would like to expect from any client connections should are transferred pending database.
  However before that happens, standby database should become primary because the client session can perform write operations.
  
  According to my knowledge, above scenarios are called "client failver." Please let me know if I'm wrong.
  
  
  
  Issues related to the:
  ----------
  
  1. Please throw some light to reach above features.
  2. According to my understanding, before customer failover happens, fast failover expected has already occurred and ensure should get the switch for the main role. I guess that all this happens thanks to timeout settings. What are those.
  
  
  Could you please help?
  
  Thank you

  I didn't say that clients cannot reconnect automatically when primary fails: I meant that client sessions can generally reconnect and also keep any session state.

  Yes, they can reconnect but only to keep the session state for a SELECT statement. It is also possible with Data Guard, not only in the CARS I wrote: here's a demo with 10 g
  http://uhesse.WordPress.com/2009/08/19/connect-time-failover-transparent-application-failover-for-Data-Guard/.
  What is not possible is to maintain a session state: (INSERT/UPDATE/DELETE) pending transactions must be cancelled.

  Edited by: P. Forstmann on Dec 8. 2011 20:30

• Question about the connection of a customer VPN ASA

  Hi guys,.

  I have a question about Tunneling VPN. I have an ASA 5505 with static PPPoE address external and local 192.168.202.0/24 network, operates as an EasyVPN server. On the other side is an another ASA 5505 without dynamic PPPoE outside interface acting as EasyVPN customer in customer ode. The internal network is 192.168.1.0/24

  It works very well! But now, I created another user who uses EasyVPN client software to connect to the EasyVPN server. This works as well.

  But how am I able to connect customer network 192.168.1.0/24 on the connections of the ASA?

  Please give me a hint.

  "But how am I able to connect customer network 192.168.1.0/24 on the connections of the ASA?

  Yes, if you set the ACL of split tunnel correctly you should be able to connect to the remote client ASA.

  Please follow the method of configuration of Cisco doc split tunnel, at the bottom of the link.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00808a61f4.shtml

  Evaluate the useful ticket.

  Thank you

  Rizwan James

• Question: Custom Classes vs. Custom components?

  I notice that I can do many things same using a custom class or a Custom Component.  Can anyone share their experience about the advantages and disadvantages of each?

  Thank you.

  Ultimately, a component is a class...

  C

• Questions about student discount for CS6

  I know I want to get the premium Production CS6 from B & H, but just recently that I realized that my class of media production could possibly make me eligible for a discount for students. I have a few questions about get a student discount I've ever gotten before.

  My first question is: should I still pay the rest of the full price? Or, more important still, the student version will stop working after a period of time?

  My second and more important question is about installing on more than 1 PC. I am currently on my beast of a laptop. The iMac to my school with short CS6 smooth like butter, and it's spec lower than my laptop. Despite this, I plan to get a PC in the future office of Monster for my productions and I'm confused about my rights to installation with a copy of the student. I understand very well that I can't install it on the computer of another of Kathy; only on my own computer. He mentions (for teacher I guess) you will need to purchase additional licenses for installation on other computers. This means that when I buy a new computer, I need to buy a new license as well? Or I can use the one provided in the box?

  Any clarification on these questions would be appreciated. Thank you

  Your license does not expire and you never have to pay the price difference. You can install the suite on one type of computer, even if you have 2 activations. A series of PC does not work on Mac and vice versa. Only 2 PC installs will work or 2 Mac ones, respectively. The activations can be managed for in applications or by giving the customer a call to reset, if you their exhausted and forgot to turn it off.

  Mylenium

• Questions about scripts in ai2

  Hello
  
  Two questions about the new install script.
  
  (1) where to find documents on the "object model" which is available for use during the writing of scripts. There the Javadocs available to all classes, getters, setters, etc that can be used?
  For example, I want to write a custom rule to detect foreign keys "without columns. For some reason, this error occurs during generation DOF, but I have not found a standard rule of prior design detect these problems before the generation of DDL. So, I'm interested in knowing how to navigate through the object model to create a rule of mine (IE is it a table.getFK (.getColumns ()) use?).
  
  (2) is it possible to use Groovy as a scripting language? If Yes, does anyone have the docs (or even draft notes) on how join as a script engine in the Data Modeler?
  
  Thank you, BP

  Hi BP,.

  to detect foreign keys "without columns. For some reason, this error occurs during generation DDL

  What version did you use to create these cases? There was such a problem in one of the pre-production versions published two years ago.

  Meta definitions, you can watch datamodeler\datamodeler\xmlmetadata directory.
  In fact, it is preferable to define the rule of index/constraint - you will get a clue that is used to represent the PK, UK, the FK constraints and indexes.
  So for your rule, you select index/constraint as object and the next Java scrip will be your rule:
  var index;

  {if (index.isFK () & {index.getElements () .length == 0)}
  fake;
  } else {}
  true;
  }

  If you remove index.isFK (control) then the rule will be valid for all PK, UK, the FK constraints and indexes.

  For script engines - you can start here - https://scripting.dev.java.net/
  I see groovy is supported - http://groovy.codehaus.org/JSR+223+Scripting+with+Groovy
  How to install it - you can follow the instructions in the first link above, it's much easier just to copy related jar in the "ext" directory - for groovy I copied "groovy - 1.7.5.jar" (I downloaded 1.7.5 version)
  in the "D:\jdk1.6.0_20\jre\lib\ext" directory on my computer. You must restart the Data Modeler - I engine script groovy as a choice in the engine drop-down list box.

  You must test how Groovy will return true or false for the Data Modeler - generally ordinary (not library), it is strange that you see in the example. If the library is used then the standard return is used.

  Philippe

• Many questions about the HP 50 g

  I just ordered a HP 50 g graphic calculator! I have a few questions about this so hang on tight! What is the USB connector on the calculator? Mini-USB, micro USB, or is it a connector owner, "custom". Then, it would be possible to connect a keyboard to the HP 50 g by using the USB Port? Is there a program that would make this possible? (I doubt it would work if you plug it..) I have a Mini-USB to female USB 2.0 connector. So I could just plug the keyboard right, provided that the port on the calculator is a Mini-USB Port. If this is not so that I could use my female to female USB adaptor to connect the keyboard.

  Thanks for your help,

  Zekelegge

  Hi!, zekelegge:

  Welcome to Forum!

  The only printer I use, 50G calculators, 48GII, 39GS and 17BII +, as well as many former models, such as the 48 s/SX/G/G + / GX, 38 G, 39 G, 42, 41 C/CV/CX and 28 C/S, is the infrared printer HP 82240 b. If you can use the emulator HP50G, on the PC, the simulator of the printer, you can download, since... http://www.HPCalc.org/details.php?id=7386

  The printer... HP 82240 B

  

  The cable series...

  

  The description... http://www.allenwan.com/hpcalcserialcable/

  The original cable...