Variant of digital table

Similar Questions

• Array of strings in 2D Digital table 2D

  Hello everyone,

  I would change a table 2D channels in a digital table 2D. I can't find a solution.

  In the attachment is an attempt. I tried many others think, but without success.

  Does anyone know of a solution.

  Thanks in advance!

  zapfle

  LV2010

  Heres a piece of code to replace the separator.

  Kind regards

  Steve

• write 1 d digital table in a binary file and start a new line or insert a separator for each loop writing file

  Hello:

  I'm fighting with digital table of 1 d writeing in a binary file and start a new line or insert a separator for each loop writing file. So for each loop, it runs, LABVIEW code will collect a table 1 d with 253 pieces of a spectrometer. When I write these tables in the binay file and the following stack just after the previous table (I used MATLAB read binary file). However whenever if there is missing data point, the entire table is shifted. So I would save that table 1-d to N - D array and N is how many times the loop executes.

  I'm not very familiar with how write binary IO files works? Can anyone help figure this? I tried to use the file position, but this feature is only for writing string to Bodet. But I really want to write 1 d digital table in N - D array. How can I do that.

  Thanks in advance

  lawsberry_pi wrote:

  So, how can I not do the addition of a length at the beginning of each entry? Is it possible to do?

  On top of the binary file write is a Boolean entry called ' Prepend/chain on size table (T) '.  It is default to TRUE.  Set it to false.

  Also, be aware that Matlab like Little Endian in LabVIEW by default Big Endian.  If you probably set your "endianness" on writing binary file as well.

• in the cell indicator digital table according to the color value

  Is it possible to change the color of text in individual cells of a digital display indicator depends on the value of the digital displayed in this cell.

  You can use the ListBox instead of indicators in table. You can change the ownership of each cell individually.

• Digital table of Boolean

  Hi all

  I'm working on a program where I can input an array of nXy of enumerator that has 3 numerical values of 0,1,2. 0,1,2 values correspond to 3 cases of boolean values constant. Digital and its corresponding Boolean values are given below:

  Numerical value: 0, Boolean values: true, False

  Numerical value: 1: Boolean values: True, False

  Numerical value: 2: Boolean values: True, True.

  So my table values nXy digital hwould turn into nX 2y array of Boolean values with 2 Boolean values corresponding to each digital item in the array. The image shows the transformation that I'm doing.

  To make this work, I took digital and added table 2 loops (one per line) and one for the column of and checked each element of the array to 3 cases. 0,1,2. in each case, I have the Boolean constants corresponding to the case. Given that the nth element of the digital array will lead to Boolean values corresponding to (2 * n) + 1 elements of the array,(2*n) I have a program for that also.

  However, when I released the results, it does not come out properly and I don't know where the logic is wrong. If anyone can help me with this, it will be great.

  GV8 wrote:

  What would you recommend to do for that?

  An initialized change of registry and a bed table (set to concatenate) in the inermost loop. Rest remains the same.

  

• How can I force sort a digital table

  I use a numbers spreadsheet [Version 3.6.2 (2577)] on a [Version OS X El Capitan 10.11.3] IMac for the sorting of items in stock by using our own numbering system.  For example 5/132/5 or 5/39/2 when I sort the tables using ascendant stock numbers does not recognize five, one hundred thirty-two, five (5/132/5) is more than five, thirty-nine, two (39/5/2) and he puts the reduction in the lowest number of the list.  Obviously the indexing works by placing the numbers starting with a higher than those starting with three.

  My question is how can I force to recognize my numbering system and index it properly.  I tried to format the data in the cells as 'automatic', 'number', 'breaking' and 'system', but nothing seems to work.

  Any help is welcome.

  Thank you

  Numbers of sees 5/1 and 5/3 and (correctly) sorts the 5/1 to go first.  Because of your item number format, you may need to set up an index to sort column.  What is your global numbering system?

  SG

• [BUG] LabVIEW crashes when replacing a control of waveform with a digital table

  Steps to reproduce:

  1. Started with LabVIEW
  2. Create a new VI
  3. Please control waveform on the front panel
  4. Right-click on the control of waveform and select replace-> Silver-> table, matrix & Cluster-> table - Numeric (Silver)
  5. See LabVIEW crash with error internal 0xC9381CDA in datamgr.cpp

  Tested on LabVIEW, 13.0.1f5 (32 bit) and 14.0f1 (32 bit), Windows 8.1 x 64 LabVIEW.

  Hi all

  The CAR initially submitted DFGray has been corrected in LabVIEW 2015! You can find a link to download here.

• MISP track changes made to a digitized table used during the conversion?

  I need to convert several databases in AL32UTF8, which is 2 TB or so of size.  I want to reduce the outage window.  Most of the data is ASCII, but the character set is WE8ISO8859P15, so it is possible to get the non-ascii character in there.  My plan was to analyze the database while it is live, then run MISP during the blackout without a full re-analysis.  But I fear that a non-ascii character could go in there from scanning the failure.  The MISP track changes since the last scan, so just check the lines that have been added or changed since the scan?  In my tests limited until now, so it seems that complete analysis would take longer than the window of failure, a progressive solution would be wonderful.  However, I don't see how to make this happen.

  
  

  Thank you

  Mike has
  

  No, the CDS is not currently able to track incremental changes. However, you could try to categorize paintings like those who can get new non-ASCII characters and those who cannot. The fact that a given table has at least one non-ASCII character is a pretty good approximation of this classification. In this way, you could just rescan the tables which are likely to get new non-ASCII characters. Depending on the size of the problem tables this may shorten the time to restart the analysis considerably.

  Note that all need conversion CLOB columns, even if they contain ASCII only.

  To minimize the window of downtime, we recommend a solution with GoldenGate. GoldenGate is, however, not a free product.

  Thank you

  Sergiusz

• Results of the query variant with unused table in the from clause

  Hi all
  
  I (processing_table2) table specified in the FROM clause in the SQL query , but I have not used any of its value in the SQL statement , but it still affects the results of the query. Please help me out here I'm naïve.
  
  This is the provided query
  
  SELECT SUM((CREV.sadc_extd*CSSP.redit_pcnt)/100)
  
  OF crev revenue_lines,.
  cssp sales_split,
  processing_table2
  WHERE crev.order_num = '7631090072'
  
  Results of the above query : 344028065018.359
  
  
  
  SELECT
  
  Sum((CREV.sadc_extd*CSSP.redit_pcnt)/100)
  
  OF crev revenue_lines,.
  sales_split PCSS
  
  WHERE crev.order_num = '7631090072'
  
  Results of the above query : 26463697309.1046
  
  
  Someone here suggest me pls!

  924804 wrote:
  Hi all

  I (processing_table2) table specified in the FROM clause in the SQL query , but I have not used any of its value in the SQL statement , but it still affects the results of the query. Please help me out here I'm naïve.

  This is the provided query

  SELECT SUM((CREV.sadc_extd*CSSP.redit_pcnt)/100)

  OF crev revenue_lines,.
  cssp sales_split,
  processing_table2
  WHERE crev.order_num = '7631090072'

  Results of the above query : 344028065018.359

  SELECT

  Sum((CREV.sadc_extd*CSSP.redit_pcnt)/100)

  OF crev revenue_lines,.
  sales_split PCSS

  WHERE crev.order_num = '7631090072'

  Results of the above query : 26463697309.1046

  Someone here suggest me pls!

  CARTESIAN PRODUCT of the changes result set

• How to convert comma-separate-channel digital-table?

  Hello

  My 34401 returns 200 values in a string with this format:

  -1.42979706E-03,+4.46900451E-03,-8.48235088E-04,-2.17539596E-03,-1.34144462E-03,+4.50590958E-03,-9.78340028E-04,-2.31519575E-03,-1.10844497E-03,+4.70200416E-03,-9.83187455E-04,-2.45499555E-03...

  If the numbers are separated by commas and doubles have a point.

  How can I now move that these values in an array of double?

  Thanks for the help

  Hi OnlyOne,

  Be aware that you have configured your computer incorrectly you use German/East Europe locale with "," as decimal separator and try to convert the measurement data using the '. ' instead...

  Well, try a format string of "%.; %f"- and read the help for the format strings!"

  When the different format string also fails, you can try this:

  

• convert variant table 2D in teststand

  Hi all

  I would like to convert an object of the type variant in a table in TestStand. Specifically, I get data from an Excel sheet (calling several methods on different objects obtained from ActiveX of Excel in TestStand). These data are of type Variant (from the call to the Range.Value2 property).

  I know it is possible to convert a 2D inside Labview (VariantToData) table, but also leave in TestStand? If I do not use any method of conversion and just assign the return value of Range.Value2 directly to an array of strings 2D, the data did not order how to know (the first dimension of the array corresponding to lines and the second to the columns of the Excel table) and the array index starts at 1 instead of 0.

  Yes, there is a function VariantToData equivalent to TestStand I can use?

  Thank you

  Hi Zladidad,

  There is a tool integrated in Teststand used to this exact: it is the dialog "properties of the Tools-> Import/Export. You can save a file that contains your settings and then adapt the copies of this file for different series of tests and import those accordingly.

  You can find an example of shipping for this here: \PropertyLoader\LoadingLimits\LimitsFromExcelFile\UsingCVI

  Check with Teststand for more information. To add comments to your properties file, you can follow this link.

  I'm sure this could be a good option for you.

  Concerning

• Table Vision Builder & features of the calculator

  Hello

  I have a question about VBAI. I couldn't find these features in the software and I couldn't be sure if the software did these features or not. So, I just wanted to ask here, and if these features do not exist, I'll post to the exchange of ideas of Vision.

  -When I'm on tables in VBAI, on the stage of the calculator, I don't see the results of all computations of element tab measures. Only a few of them are visible, and there is no way to scroll left and right to see the other.

  Also, when I try to use these results table on the custom recovery stage, I can only use them as a whole, without any choice of format string.

  

  Are there other ways to do this or not?

  I see the same behavior on my end with digital pictures. I want to play with it some more, but I will probably be filling a CAR for that.

  To work around the problem, you can convert the digital table in an array of strings. It seems that tables of channels is displayed correctly the decimal parts after the conversion. I suggest using the fractional string function number, located in the String-> String Conversion/number. This will allow you to input a table 1 d of slna and specify the precision.

• How to change the color of the elements of a digital picture (separately) programmatically by using the property node?

  For example, I have 3 digital controls, controlling 3 digital array elements (digital control is connected directly to the indicator). So if I change value in digital control 1, then the table item # 1 of the digital table should blush when the value is greater than 5. Similarly when I change NUM controls 2 item 2 of the table should turn red when the value control num 1 exceeds 10. Similarly for the 3rd element. In other words, I want to control the ownership of the elements of the array individually through the digital command separated.

  I did it for unique digital indicator.i.e. When I change the values of the control, then a single digital indicator changes color (text digital property BG) and with table values, changes the color of the entire table, but I want to change the color of the singles of the table element.

  Please help thanks.

  I hope you do well! You cannot change the properties of elements of an array. What you could do instead is probably using a table where you can change the background color of a cell?

• problems with table formatting

  Hi all

  I currently have problems with formatting or to use a table to record the data (well it will be saved in a .csv file, but I'm trying to use the table to get it all properly formatted to the .csv file for ease of reading). It is probably something easy I'm dominant or do not add. If someone with more knowledge of labview (I only worked a few months with her power) could guide me through the process of how to make my idea works, I would be very grateful.

  I've attached the labview file, so you can see what I'm trying to do and how I'm trying to approach it a little more.

  In addition, if you need a little more explanation, just ask.

  Thank you very much!

  At first glance, it seems that you have made more complicated it must be.

  You have a ton of controls and indicators that could be better managed as tables or groups.

  To your immediate problem of writing file, you could just build a digital table and then use the entry in the File.vi worksheet and select a comma as separator.  The step where you are creating the spreadsheet string and then write in the text file is not necessary.

• Variations on the entrance table

  Why I can't get a picture of variats as a control?

  After you have created one, I got error saying:

  Cluster 'nothing': control contains no elements and is not defined.

  I have developed a few table manipulation code which should work with different types. Why can't the variants of the ise?

  Ok

  My mistake.

  I constantly used to cluster instead of Variant.

  Table of variants is possible.