Question about DW CS3 generated CSS code...

Similar Questions

• Question about area with a rug code * a DVD-RAM UJ - 841 S

  Hello!
  I have a Toshiba Satellite with a CARPET * a DVD-RAM UJ - 841S. Someone knows something about the firmware for this? I tried to use dvd43 and VideoLAN, but it does not work properly!

  I guess you do you want to Flash the firmware to remove the region code of the DVD player.
  Am I wrong?
  Don t do it! It risky s.
  If you update the drive with the wrong firmware or is not compatible the drive is not able to read/write to the media; CD and DVD.
  In addition, the use of the incorrect firmware will avoid the reorganization of the training by the BIOS.

• The question about the user-generated content

  Hello

  my application is a connected set of bbm and is also connected e-mail.
  It allows players to send each other messages while playing a game.

  is this considered to be generated by the happy user?

  If do what methods use in safegaurding a message?

  Not under the context in which you ask either at the moment.

  For bbm and email you could always encrypt the data, but I think it's overkill for this period of the APA.

• DW CC - Responsive Design: Questions about properties inherited from CSS

  Hey all.

  I learn a lot, but I've only been designing web sites for a short time now.  I use Dreamweaver CC and use sensitive design patterns.

  Here's the long and short of it:

  The delicate design model uses 3 @media CSS selectors in the following hierarchy:

  -Global: (less than broad 481px)

  -Tablet: (between 481-wide 768px)

  -Desktop computer: (above 769px, 980px wide max)

  As you can see, overall is 'Mobile' design, but it is at the top of the hierarchy.

  I'm trying to display: no the .header h1, h2, p ONLY in the .header of mobile display.

  (No media selector: IE: overall)

  .header h1, h2, p {
            display: none;
  }
  

  The problem is all h1, h2, and p in the css elements all have disappeared.  Even those of other classes in the other views.

  I did something wrong?  How can I create a selector for the (global) .header class it will affect, say, .other_class ?

  Get it; If I change something in the world, nothing further down in the hierarchy must be attached.  That is done through the display: xxxx ?

  Example:

  /* Global Settings: Mobile format (less than 481px wide)*/
  
  .header h1, h2, p {
       display: none;
  }
  
  
  /* Tablet Layout: 481px to 768px. Inherits styles from: Mobile Layout. */
  @media only screen and (min-width: 481px) {
  
  .header h1, h2, p {
       display: compact;
  }
  }
  

  Any help is appreciated.  I can post full CSS / HTML if necessary.   I thought that these excerpts should be sufficient to demonstrate, though.

  Hello

  To change the display only in the mobile layout, you will need to use a media query, otherwise it will apply to all screen sizes-

  @media only screen and (max-width: 480px){

  .header h1, h2, p {
     display: none;
}

  }

  PZ

• Question about the API

  Dear all,
  
  I have a question about getting this line of code to the JSF API.
  

  FacesContext facesCtx = FacesContext.getCurrentInstance();
  Locale defaultLocale = facesCtx.getApplication().getDefaultLocale();

  I don't know what locale will be this line give me?
  My hypothesis is that, this returns the locale of the server in which the application has been deployed?
  
  Currently, it returns the locale of my current computer. But I would like to know, what happens if I deploy
  This in another computer to another region?
  Can anyone confirm my doubts please? Thank you

  getDefaultLocale returns the locale by default in the form of installation in the config.

  
  
  

• Hello Mr President! I have a few questions about the Word report generation please.1.How can I add a border to a page in word? 2. How can I add gridlines to a table generated related word?. Can 3. how I add a border to a picture of the Word report?. Thank

  Hello!

  Sir, I have a few questions about generating word reports using (C language in labwindows) please.

  1. How can I add a border to a page in word?

  2. How do I add border lines and grid to a table generated in Word report (not "cvi control table"inserted from gui, I wonder about the table generated in Word report)?

  3. How can I fill a table cell of report word with the data type other than 'character '.

  And sir a question on the use of the timer in labwindows cvi please.

  Sir, I'm trying to set a time minimum interval timer to 1millisecond (0.001 s), that I have set, timer cares about the interval set by me he only meets the minimum default time interval which is, I think as 10milliseconds (I'm using windows xp service Pack 3 version 2002).

  Concerning

  Imran

  Pakistan

  Have you read this statement ? It explains how to set the registry value:

  If the REG_SZ useDefaultTimer does not already exist, you must create it under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\CVI Run-Time Engine\cvirte. "" This can be done navigate to the appropriate folder, and then click Edit "New" string value. Then, click on means the name of the new value created, select Rename, and then specify useDefaultTimer as the name. Finally, double click on the name and specify the value True or False.

• Question about styling a form with CSS in the Template

  Hola

  I made a page from a template and I insert a form in there

  where can I style this form with CSS?

  In the model that has been generated css style?

  or

  Directly to the page?

  Furthermore, if I saw the page in explorer 8, legends looks with a black color and down (not what i intended)

  In Safari, they appear purple and where they suppose to be

  Why?

  Hope you understand

  Thank you

  Daniel Ulysse

  Please post a link to your site so that we can admire this phenomenon.

  GRAMPS

• A question about external authentication with PHP OCI8 using a portfolio store

  Hello
  

  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE     11.2.0.1.0     Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> 

  OS: Linux Fedora Core 17 (x86_64)
  PHP Version: 5.4.14
  Apache version (httpd): Apache/2.2.23 (Fedora) 

  I have a question about OCI8 connection to the Oracle server via portfolio, which I understand is a good practice because we do not have to hard code the users password. I'm trying to read pages 117 and 118 of the book The Underground PHP and Oracle manual online to learn how to set up a portfolio. I proceeded by steps as explained in these two pages (except that at the end I connect, as a normal user, not a privileged user) yet, apparently PHP does not detect the user.
  
  Here's what I write in my script
  

  $connection = 
                  oci_connect 
                      (
                          "training", 
                          "", 
                          "php_ora_usr", 
                          "AL32UTF8"
                      );

  the training is the name of the user that I use in my PHP scripts to connect to the oracle database and the password is mypassword (is not true, just for the purpose of this thread :)) the code above gives me the following error:)

  Warning: oci_connect(): ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 91
  
  Fatal error: Connection step: ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 13

  But if I also provide the password which is,

  $connection = 
                  oci_connect 
                      (
                          "training", 
                          "mypassword", 
                          "php_ora_usr", 
                          "AL32UTF8"
                      );

  Obviously it works, but at the same time, this means that my wallet is not operational.
  
  So I'll write here, step by step, how I did according to the instructions contained in the pages 117 and 118 of the above mentioned book and I would be grateful if you could kindly tell where I made the mistake (s)
  
  The following text was performed under my oracle linux (so the dbagroup)
  
  Step 01:_
  I created and provided the password for the directory of portfolio

  mkstore -wrl /home/oracle/wallet_dir -create

  Step 02:_
  I created an entry for my oracle user that will be used in my PHP scripts to connect to oracle
  user: training
  password: mypassword

  mkstore -wrl "/home/oracle/wallet_dir" -createCredential php_ora_usr training mypassword

  I also checked that the entry was actually created for my user in the portfolio

  $ mkstore -wrl "/home/oracle/wallet_dir" -listCredential
  Oracle Secret Store Tool : Version 11.2.0.1.0 - Production
  Copyright (c) 2004, 2009, Oracle and/or its affiliates. All rights reserved.
  
  Enter wallet password:                
     
  List credential (index: connect_string username)
  1: php_ora_usr training
  $ 

  Step 03:_
  I added the following to my $TNS_ADMIN/tnsnames.ora

  .  .  .
  php_ora_usr = 
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = db02)
      )
    )
  .  .  .

  Step 04_
  I added the following to my $TNS_ADMIN/sqlnet.ora

  # sqlnet.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
  # Generated by Oracle configuration tools.
  
  NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
  
  ADR_BASE = /u01/app/oracle
  
  WALLET_LOCATION =
      (SOURCE =
          (METHOD = FILE)
          (METHOD_DATA =
              (DIRECTORY = /home/oracle/wallet_dir)
          )
      )
  SQLNET.WALLET_OVERRIDE = TRUE
  SSL_CLIENT_AUTHENTICATION = FALSE
  SSL_VERSION = 0

  _ Step 05
  The TNS_ADMIN environment variable is already set correctly in * / etc/sysconfig/httpd * so I didn't need to do something for this step
  
  
  Step 06_
  I gave to access Apache (as root) in the directory of portfolio (in fact, it seems that the user oracle (dba) of linux also has the required privileges to grant this access to the apache)

  # setfacl -m u:apache:rx /home/oracle/wallet_dir
  # setfacl -m u:apache:r /home/oracle/wallet_dir/{cwallet.sso,ewallet.p12}

  Step 07_
  Restart Apache

  # service httpd restart

  Step 08_
  Finally make a test connection using the connection string php_ora_usr which the entry was created earlier. And the test was not successful, as indicated above

  $connection = 
                  oci_connect 
                      (
                          "training", 
                          "", 
                          "php_ora_usr", 
                          "AL32UTF8"
                      );

  The error message:
  

  Warning: oci_connect(): ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 91
  
  Fatal error: Connection step: ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 13

  I would appreciate it if you could kindly shed some light.
  
  Thanks in advance,
  Dariyoosh

  That gives a good clue to begin with. With your platform/Apache/DB, you might need different ACLs. Test directory and permissions. Check what euid your Apache runs as. Good luck.

• Generated html code does not open in firefox/safari when incorporated into an iframe

  Hello

  I was mingling with robohelp for a few weeks now. I can generate a html from a Framemaker book end site. It is integrated in an < iframe > integrate into our website. It works fine on chrome. "However I get on firefox/safari is all ' i ' '. View the source, it becomes obvious that this weird bunch of characters appears before the < html >. I looked into the real generated html code and I see this < feff > tag prefix before the < html > in each file. Naturally, I advanced and removed and the page will now load correctly on firefox/safari. However, the balls are all screwed up. I read a post somewhere that says < feff > contains information about the css classes.

  I use techniques Comm Suite - 3.5(full_version). The webhelp html code is generated using the framemaker publishing feature using a file of saved settings *.isf.

  So, how to fix this? Any suggestions are welcome.

  Thank you

  The "bunch of odd characters" is known as the BOM (Byte Order Mark). The problem is on the server.

  I saw the same thing when you first use RoboHelp 8 and this is what I have been told by the company that hosts my site.

  "I would therefore conclude that the solution to this problem (on Linux systems running Apache) is to add the directive AddDefaultCharset utf-8 on the site's .htaccess file or the Apache config. The advantage of the latter is that it affects only the individual sites. The Apache default character set comes from the file of locale on Linux and defaults to iso-8859-1. It is the conflict between the Apache header with iso-8859-1 and utf-8 character page, which obviously causes problems Firefox. »

  In a post on the chrissy_tissy forum added

  My machine is Windows, but this still worked correction - some notes on post-porn the fix:

  1. make the fix itself (httpd.conf: AddDefaultCharset utf-8).

  2. restart the box to apply the hotfix.

  3. once the box is restarted, clear your FireFox cache to ensure that you do not continue to see the cached file.

  Once all this is done, you will see the contents of output as expected.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Subquery 'WITH SAWITH0 AS' OBIEE 11 g factoring clause contained in the generated sql code

  I have observed that OBIEE 11 g generates in physics request log query using the (subquery factoring) WITH clause to the generated sql code elegantly readable. It's great! Thanks for the developers. However I have a few questions about it.
  
  __Background__
  Oracle database ' default behavior is that if you have only a subquery in the section, it runs as a perspective in line and he not materialized before the main sql is running. If you have more than one default database engine materializes all the in the order of definition. In some cases, it can completely blow up the SGA and make a query without end. To divert this behavior, you can apply two tips that work both in inline views in subqueries as well: / * + MATERIALIZE * / and / * + INLINE * /, however Analytics 11 g does not seem to have capabilities of Board at the table level logical, only at the level of the physical table.
  
  If we go with the current default settings, the developers do not know this feature can fall on serious performance problems for the sake of a few sweets of syntax to the generated sql level, I'm afraid.
  
  __Questions__
  
  * It is possible to turn the Analytics Server to not use WITH but views inline instead?
  * Is it possible to sneak in a few boards that would the / * + INLINE * / allusion to the proper place in the subqueries generated if necessary
  * Is the Oracle database has any initialization parameter that can influence the behavior of this subquery factoring and divert by default?

  The WITH statement is not added to make the query more elegant, it is added for performance reasons. If your queries slow to run, then you can have a design problem. In a typical DWH DB SGA should be increased seriously given that ran queries are much larger and complex than on an OLTP DB. In all cases, you can disable the WITH statement in the administration tool by double clicking on your database on the physical layer from object in the features tab. The function is called WITH_CLAUSE_SUPPORTED.

• A question about type

  Okay, at the risk of exposing me like a complete jerk, I need to ask a question about type.

  I use Fireworks CS4 to design a website of 40 to 50 pages. Most of the site is composed of ten stories, each taking two to five pages of the site. I use ghraphic and pictures to break up the grey type and illustrate the words. I anticipate using 14pt Arial for my policy. The text will be displayed on a 'unique' (that is to say, not repetitive) texture.

  I put on my pages with photos and other graphics, and I glued the type of original stories around the images. (I don't use Lorem ipsum for text space booked because I wanted an accurate measure of the screw-the-page notice words.) In other words, I wanted to be sure that everything fit and don't let no troublesome space at the end).

  I know that I do not export the type with images in Dreamweaver. I'll remove the text in Fireworks when I export, then paste it in Dreamweaver so that the pages appear as I have originally designed the.

  However, my question is this: If a reader opens one of my pages with his default computer to, say, 12pt Verdana, if it screws up the layout of my page? As I said above, I have designed the pages at Arial 14 pt. If the type will flip off my pages - or type will inches less on a page - if the Player browser is set to a different font size or point? If Yes, what can I do to make my pages (or contraction) to adjust the reader his reading preferences?

  Thanks again for your help. Of course happy that I do not use my real name on it.

  When you write the HTML code, you place the images next to the paragraphs they are associated if the police or the window changes size, then the whole of the document is redéroule, but logically, everything to its planned place. This can be frustrating for people who are used to define exactly where the images appear with respect to the text and even kerning and spacing to make a line "so." You will have awkward gaps somewhere, let it go... let the way you free from this concern.

  Everything is in a box, however. In this box, you can put images repetitive or expandable. So yes, you can put a background behind the text, no repetitive image on each of your pages and you should be able to set the box so that duplication of the background image will not appear if it is larger than the active area. (I think it would be in the CSS overflow divs property... you'd have to check).

  Here are some tutorials using broad, non-repetitive background images for the page. You could adapt the technique to a content div:

  http://Line25.com/tutorials/basic-Web-page-background-techniques-with-CSS (scroll down)

  http://www.WebDesignerWall.com/tutorials/how-to-CSS-large-background/

  On the other hand, however, lines of text that are more than 2 to 2.5 wide alphabets are difficult to analyze. If your site is intended to be text-heavy, you might be better off with a fixed width for your text box.

  I think that the comment the blogger relates using Fireworks Slicing page to export HTML code, which gives you a fixed design, based on a table. The HTML code, you can export FW is not for live sites. It's just for prototyping. It is better to use CSS for layout, rather than tables, because the code is easier to maintain. I came across this interesting tutorial (the author uses Photoshop, but any graphic program works if you want to follow along):

  http://NET.tutsplus.com/tutorials/HTML-CSS-techniques/design-and-code-your-first-website-i n-easy-to-understand-steps.

  (I hope this helps you!)

• two questions about Style sheets

  With the help of RH7, two questions about styles:
  
  1. I have an older project which seems to act weird. I want to update the styles in our current one important, but seems not to accept it. I can import the file very well, but it doesn't 'take' the formatting (e.g. headers, 'Normal' text, etc.).
  
  It is important without any errors, and in the list of the topic the new style sheet shows like the style associated with this topic, but I can't find a way to apply new formats. I even tried closing and reopening of HR to see if it was some sort of refresh problem.
  
  Any thoughts? Is this a problem of corruption?
  
  2. it seems some of previous authors allowed HR to create of new style sheets for each topic as it has been imported into our system of assistance (from the original Word documents).
  
  Is there an easy way to globally remove these style sheets and their replacement by a new? My instinct is to:
  
  1 import the new style.
  2. Select all subjects in the list of topics, right-click to open the properties, and select apply the new style.
  3. use Project Manager tab to remove all the other styles.
  
  Sounds easy enough, but my concern is to know if HR will apply these changes to the subjects. In addition to my problem in #1 that I met occasionally issues where HR does not seem to apply styles or style changes accurately.
  
  Thank you

  Hi all

  Note that Styles and Style sheets have an order of priority or hierarchy.

  You can have all the styles declared in a referenced external style sheet and everything is fine. But if the document has styles using the same names, those who will prevail.

  For example, maybe your file CSS says that all title 1 text will make in dark blue to 24 point Arial font. The subject could have statement Heading 1 incorporated, which specifies that the text should be Brown in Verdana 12 point. Even if the subject is properly referencing the external CSS file, the text will be rendered Brown because the embedded style rule will override the CSS rule.

  And what will replace it is if someone text selected and applied the style directly. In this case, you're dealing with a style online.

  One way to help determine if you are dealing with a style incorporated is to simply remove any link to the CSS file? The text seems always the same? If so, you probably deal with a built-in style, or online.

  To check a style incorporated, look at your HTML code for the topic. Search in the region of the head for a (including the tags).

  See you soon... Rick

• The Essential Guide to Dreamweaver CS3 with CSS, Ajax, and PHP by David Powers

  The Essential Guide to Dreamweaver CS3 with CSS, Ajax, and PHP by David powers:
  
  This book would help me learn more about Spry and Ajax and how applications may be lodged with them, if I have my e-commerce site works on a compiled C code cart (ShopSite) but supports scripts PHP server-side or is - this only for shopping carts based on PHP itself (like X-Cart)?
  
  I'm not sure. Someone please let me know if I can buy this book. Thank you.

  ahsenabro wrote:
  > 1. What I need to be a developer/programmer to learn from this book or
  > can a savvy entrepreneur can also get some gems out of it and direct sound
  > programmer?

  You don't need no prior knowledge of PHP or Ajax, but you must
  know the basics of HTML and CSS. As I say in the introduction, "You."
  don't need to be an expert, but do not have a curious mind.
  It teaches the basics of web site design, or he's trying to list
  each unique feature in Dreamweaver CS3. There are many other books
  to fill this gap. However, by working through this book, you will gain a
  in-depth knowledge of the most important features of Dreamweaver.

  > 2. I am interested in buying this book especially to implement cool Ajax/Spry
  > stuff on my e-commerce site. I wonder about PHP, because the content of the book
  > mentions making a PHP site. Now I realize this book isn't on purchases
  > carts, but the Ajax/Spry stuff can be implemented on e-commerce sites, right?

  The book provides detailed coverage of the features of Spry 1.4
  Dreamweaver CS3, which can be applied to any site. With minor
  adjustment, you can also use Spry 1.6. It is important to realize,
  However, the features of Spry/Ajax in Dreamweaver CS3 * cover of no
  asynchronous requests to the server. The ability to communicate
  asynchronously with the server has been added in Spry 1.6. If it has
  the asynchronous server calls and answers you are looking for, your
  programmer will need to dig into the documentation for Spry 1.6 on the
  Adobe Labs site and manually code it.

  The Spry features covered in the book are Spry, Spry UI widgets effects
  (menu accordion, tabbed and folding panels), Spry
  Widgets of validation and Spry XML data sets.

  > I just want to know if I can learn and implement Ajax/Spry apps on my
  > HTML/CSS-based simple pages, on a server that allows PHP scripts on the server side
  > but the pages themselves are not with the .php extension. This book is still going
  > apply?

  Yes. All Spry techniques can be used on any web page. This is not
  you have to be a PHP one.

  --
  Adobe Community Expert David Powers
  Author, "The Essential Guide to Dreamweaver CS3" (friends of ED)
  Author, "PHP Solutions" (friends of ED)
  http://foundationphp.com/

• Question about "Windows 8.1 DG to Windows 7 Pro 64-bit" and Windows product key

  I have acquired a recnet ThinkPad T450 fdrom a retialer online (NCIX) and I hav ea a few questions about the installed Windows operating system.

  Before I just go further, HRE are some information about my particular system.

  Lenovo ThinkPad T450

  Model: 20BV00BUS

  CPU: Intel Core i5-4300U

  RAM: 4 GB

  Under the product description, it was stated "Windows 8.1 DG Windows 7 Pro 64." My understnading, the ThiknPad has been installed with Windows 8.1, but downgraded to Windows 7. There is also a Windows 8 Pro badge sticker at the bottom of the matchine.

  Is it possible, at the end of the user/consumer, to alter the functioning ti repressive back Windows 8.1?

  Can I create a recovery with Windows 8.1 disk?

  A separate but related matter relates to the Windows product key.

  I noticed the Ultrabook do not come with a sticker / label with the Windows product key (i.e. COST). Some quick research indicated that the Windows key is programmed into the BIOS.

  This indeed true (I wish an audit)?

  The key is visible in some way (for when you need to reinstall the operating system. I have not tried to enter the BIOS at the moment)?

  Thank you for taking the time to consider my question.

  Kind regards

  Victor L.

  Hi Victor,

  I'm in the same boat as you type, but want to keep the facilities of Windows 7 rather than pass them to 8. Just like you, I buy our Lenovo from different retailers and they come with windows 7 installed through the Windows 8 lower upgrade program.

  We had one or two laptops come with a recovery media (for windows 8/8.1 only) but have noticed that all laptops now come with no physical media or codes for the recovery. WIN8 stickers, you described is more came with the license key on the sticker (it comes to stop you using the same license again and again, microsoft will get more money if you buy another license etc.). I also saw that the key is essentially located in the BIOS but were not able to test what we use any of windows 8. I use it even at home!

  To answer your question, you can get a recovery of Lenovo for Windows 8 media!

  Go to the following link: https://support.lenovo.com/us/en/lenovorecovery

  (It help you understand why this method is used on this page as well)

  Select Start,

  Please have your serial number of your laptop, (to find it go to this link: https://support.lenovo.com/us/en/find-product-name)

  If you qualify (which you will very probably) Lenovo will ship for free, recovery disks give it a go, took me 2 minutes.

  I hope this helps.

  Best regards, Max.

• Question about video drivers Satellite P100-257

  Hello.
  Question about video driver. Version 14.25... Works (tells... 945 GM chipset); 14.27--works but with ocassional problems (tells... 945GM/GU); version 14,29... (said 945GM/GU) - does not work at all - black screen, but you can hear sounds which tells that XP does all right.

  Why that? And what is GU? Pilot info says it is for 945GM, pilot says he's for 945GM/GU.

  All kinds of three said they are for Mobile Intel 945 GM Express chipset. Who initially my machine have said there. In section "video card" my machine said no Intel - some Calg... - don't remember exactly the name.
  Thank you very much.

  Hello

  As much as I know Satellite P100-257 supports the graphics card Mobile Intel 945GM. The code name of Intel's GM Calistoga
  This is not the same thing as the chipset Intel 945GM/GU. Both are different and so the graphics drivers are not totally compatible!

  The Intel page provides some interesting info on these chipsets:
  Mobile Intel Express Chipset 945GM

  Unfortunately, I have not found anything on the 945GM/GU.