Question about e-mail alerts

Similar Questions

• Question about work load alerts

  vCOPs has been running in our environment for 10 months and more. So far it has been used more for critical alerts that analysis. We are trying to get a deeper understanding.

  5.8.1 running

  I read the following messages, but am still a little foggy on why we see what we see.

  https://communities.VMware.com/message/2396460#2396460
  

  https://communities.VMware.com/thread/449924
  

  We receive alerts alert network that demand is to reach 100% of the available resources.

  New alert Type: health, Sub-Type: workload, State: immediate, kind: HostSystem

  The application of the object: info is 100% capacity of available resource. Network is a limited resource.
  Alert type: health
  The attention of subtype: workload
  Alert: immediate
  Resource type: HostSystem

  We receive as critical network warns that demand 100% of available resources.

  Nalert Type ew: health, Sub-Type: workload, State: criticism, genre: HostSystem,
  The application of the object: info is 100% capacity of available resource. Network is a limited resource.
  Alert type: health
  The attention of subtype: workload
  Alert: critical
  
  

  If you look at the attached doc you can see actual usage during the alarm time is about 55% of the capacity and actual use during the critical alert is about 77% of the capacity.

  If the alerts are not an indication of actual use of NIC I'm not sure what we say the alerts.

  Any help would be appreciated.

  This network IO bar there is just the last collected metrics. You need to appear a metric chart, where draw you the overall badge | the workload for this host, as well as individual workloads of cpu/mem/disk/network. Look back the past 24 hours or 7 days... and you will see them fortification (vC Ops is not incorrect to say that you are 100 > 90). It is these spikes that can cause alerts. One option would be that you could reduce the alert for infrastructure. workload in config policy to not notify you when this product (alert system host workload). Or instead to drop quite alert, simply set the levels of warning/immediate not getting attention, the critical value to 100 and see what is happening (for the badge of infrastructure workload changes). However, probably if you let this long race, vC Ops will learn the maxObserved of the NIC and conditioned as well higher watermark beyond your normal percentage of 80/90/95 levels.

  For CAP / etc, you can ignore the e/s disk and network i/o, but not the case with the calculations of badge of health.  If you need to exclude individual components of the overall workload of a vSphere resource calculation, the only way is to stop the alerts on the overall badge "charge" and alert on the parameters of work of children... e.g. cpu | workload, mem | workload, etc.

  A lot of options... Try them and see what works best for you.

• Question about Apple Mail IMAP

  I have converted e-mail accounts on two computers (mine and my wife's) POP IMAP. We have two email addresses that are the same on both computers. We now see that delete or move an e-mail message from a computer also done the same thing, automatically, on the other computer. It's embarrassing, because some of us can delete or move one message before the other saw it.

  Is there a way to isolate incoming messages on both computers to avoid this problem?

  hearncl wrote:

  Is there a way to isolate incoming messages on both computers to avoid this problem?

  Yes, do not use the IMAP protocol.

  Accounts IMAP synchronize the changes on the server, and will sync exchange for each client using the account. If you want to manage the same account separately, use rather pop.

• Question about functioniality Tempo alerts

  Hello.
  It will be her stupid for most, but I don't know what to do with Tempo driver alerts as a new owner of the Satellite. The instructions are not clear, and I just downloaded 5.
  I now run an executable file in the downloaded files? I then move to a specific location? Any advice on this would be appreciated. Thank you

  If you want my opinion track: update of the last package of added value for your laptop model. You can find it on the Toshiba support under http://eu.computers.toshiba-europe.com page
  After completing disable tempo and enjoy your life.

• Question about Toshiba update alert

  Hello everyone.

  First of all, I'll give you my configuration:

  Toshiba Satellite P200.
  (I hope that's enough?)

  And now my problem:

  I noticed that the utility tool alert Toshiba (I don't remember the good reputation. It is the tool that warn you when the new update available for your pc/PC toshiba laptop and you give a link to the file) does not work anymore.
  Maybe I'm doing something wrong... I don't know.

  Where could I find this tool useful? (Download?)

  Thank you very much

  Hello

  Maybe you write on the TEMPO. If Yes check it please TOSHIBA TEMPOpage.

  Good bye

• question about sending mail and the use of UrlEncodedPostData

  Hello

  I need to send over https three things:

  (1) framework, which is a byte [] object, and has some information about the device and the things that need to be sent to the server

  object String 2) imei - imei of the device.

  (3) data - some data, which are a String object

  now I need to use URlEncodedPostData, but...

  UrlEncodedPostData _post = new UrlEncodedPostData(null, false);
  
  _post.append("frame", ???)-> my frame is a byte[] object
  

  so, what should I do? should I change channel frame? but, later when I send the _post to the server that I use:

  _httpConnection.openDataOutputStream(_post.getBytes());
  

  YH, the problem is-how to put a byte [] object to the urlEncodedPostData and then send it?

  The point of encoding is to ensure that special characters can be detected correctly.  There is no URL address, as the settings.

  You will notice that the class that you are trying to use is called URLEncodedPostData.  I don't know if the same URL encoding is used in BOTH and given POST, but I think this class should be used in the data of PUBLICATION, rather than to GET data (look at the name).  You will find that the process of encoding data GET is not so difficult and I don't know if you look you will find J2ME coding code on the Web, that will help you create correctly to GET URL format.

  However, I still think you should consider the difference between GET and POST, and what data is passed by each type of application.  I think that if you had done that earlier, you wouldn't be in this position, you understand better my answers and you will understand how to create the queries POST you have to best use later.  GET and POST are NOT Blackberry or specific RIM, they are the Web specifications and used on all platforms.  There is a lot of documentation out there.

• Question about unknown status alert.

  Hello, we have M620, OME 1.3.1 environment.

  

  

  Issue.

  (1) what mean this alert?

  (2) how to avoid that this alert? I have already applied to speed election changed slowly

  

  (3) can we ignore this alert?

  

  Hi Lee,.

  If the State of health of the device then changes to a stranger in the status survey OME automatically generates this alert to say that the health of the device has changed.

  If you don't want to see these alerts, you can disable this alert settings option in the preferences. Uncheck the box enable internal health alerts and you will not see these alerts.

• I have about 25 mail in my email application, but he needs more than 2 GB of memory

  I have about 25 mail in my email application, but he needs more than 2 GB of memory. What could be the reason. Thanks in advance

  You have email stored in the junk e-mail folders?

  If you do this may be the question that is being established.

  Max

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• Questions about nb200

  I recently bought a mini nb200 with windows 7 and I have a few questions about it. How can you set up your email, I was willing to put up with Outlook Express, but I don't know if I can. Also, is there a way to get a paper copy of the user manual?

  You can download and install a new e-mail program when you download Windows Live via Microsoft Update. You can select the components of Windows Live, you want to include by checking a box for each you want. I installed all the. Or you can use Outlook, if you have Microsoft Office and you want to install it.

• I forgot my password to my ID Windows Live ID I need to answer the questions about my "ID". I don't know the answers.

  Windows Live ID problem

  Hello world.
  I have a small problem regarding the Windows Live account. My account is: * e-mail address is removed from the privacy *, I forgot my password.

  I need to answer the questions about my "ID". I don't know the answers that I've tried over and over again and I even tried to make security issues and I could not answer.

  What can I do?

  Hello RobertKristof,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• I'll try to find the right forum to ask questions about Outlook Express 6

  I'll try to find the right forum to ask questions about Outlook Express 6

  XP: Networking, Mail & onlinehttp://social.answers.microsoft.com/Forums/en-US/xpnetwork/threads Bruce Hagen MS - MVP [Mail]

• Questions about the Windows Feedback program Fullfillment

  When will I know if my fullfillment of windows feedback program is over, that I have installed on my PC?

  Hello mpic16,

  If you have questions about the Windows feedback program, you will need to respond here.
  https://WFP.Microsoft.com/welcome.aspx

  You can send an email to: * e-mail address is removed from the privacy *.

  They would be better able to answer your questions and concerns.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• E-mail alerts for CPU and use of HD

  All,

  New here and new to the foglight software. I had this project dumped in my lap with very little knowledge about what I'm getting into.

  We have a handful of VMware servers, that we would like to get email alerts.

  I got regarding the grouping of these servers in a "service".

  Now, I need to make a few specific rules to receive alerts email for two situations:

  (1) when the virtual computer CPU usage exceeds 80% for more than 30 seconds.

  (2) when the available disk space is less than 20%.

  Can anyone help? Point me to another position?

  Let me know if you need more details.

  Thanks for the tips.

  The rule for in-car use is "VMW Virtual Machine use reader logic" with these 3 variables like warning/criticism/fatal levels that you can change

  

  The rule for the CPU usage is VMW CPU usage of virtual machine with these 3 variables like warning/criticism/fatal levels that you can change

  

  Insofar as the e-mail alerts, you can get them directly for all vmware alerts by setting the VMAdmin registry variable, or you can set the e-mail on the service parameters in the function generator

  

  I hope this helps.

  Golan

• Questions about discussions...

  Hello

  I have a new app to do that requires network access.

  I have read this EXCELLENT post from peter_strange:

  http://supportforums.BlackBerry.com/T5/Java-development/connecting-your-BlackBerry-http-and-socket-c...

  Because I can't use BIS - B because I'm not a partner of the Alliance, I wanted to take a look at the new OS 5.0 network API and see how it works.

  I know that network connections should be performed in a separate thread.

  I'm far from being an experienced Blackberry developer... so I have a few questions about discussions.  I looked around the Internet, read on the forum, read the documentation, did some tests and so far, I came up with this code:

  SerializableAttribute public class HTTPConnection extends UiApplication {}
  Public Shared Sub main (String [] args) {}
  HTTPConnection PAP = new HTTPConnection();
  theApp.enterEventDispatcher ();
  }

  public HTTPConnection() {}
  pushScreen (new HTTPConnectionScreen());
  }
  }

  class HTTPConnectionScreen extends form {}
  public HTTPConnectionScreen() {}
  setTitle ("HTTPConnection");
  Add (new RichTextField ("choose a type of connection :"));

  final RadioButtonGroup = new RadioButtonGroup() rbGroup;
  RadioButtonField radioButtonF1 = new RadioButtonField ("Direct TCP", rbGroup, false);
  RadioButtonField radioButtonF2 = new RadioButtonField ("WAP 1.0/1.1", rbGroup, false);
  RadioButtonField radioButtonF3 = new RadioButtonField ("WAP 2.0", rbGroup, false);
  RadioButtonField radioButtonF4 is new RadioButtonField ("BES/MDS", rbGroup, false);.
  RadioButtonField radioButtonF5 = new RadioButtonField ("BIS-B", rbGroup, false);
  RadioButtonField radioButtonF6 = new RadioButtonField ("WiFi", rbGroup, false);
  Add (radioButtonF1); Add (radioButtonF2); Add (radioButtonF3); Add (radioButtonF4); Add (radioButtonF5); Add (radioButtonF6);
           
  FieldChangeListener listener = new FieldChangeListener() {}
  ' Public Sub fieldChanged (field field, int context) {}
  ConnectionThread ct = new ConnectionThread (rbGroup.getSelectedIndex () + 1);
  CT. Start();
  }
  };
           
  ButtonField buttonField = new ButtonField ("Connect", ButtonField.CONSUME_CLICK);
  buttonField.setChangeListener (listener);
  Add (buttonField);
  }

  / * method of onSavePrompt override default to avoid being asked if I want to record every time * /.
  protected boolean onSavePrompt() {}
  Returns true;
  }
  }

  class ConnectionThread extends Thread {}
  private int transportType;
  public ConnectionThread (int n) {}
  transportType = tt;
  }
      
  public void run() {}
  ConnectionFactory connFact = new ConnectionFactory();
  ConnectionDescriptor connDesc = connFact.getConnection ("URL", transportType, null);
  If (connDesc! = null) {}
  try {}
  HttpConnection httpConn = (HttpConnection) connDesc.getConnection ();
  httpConn.setRequestMethod (HttpConnection.POST);
  httpConn.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");
  OutputStream out = httpConn.openOutputStream ();
  out. Write (Integer.ToString (transportType). GetBytes());
  int responseCode = httpConn.getResponseCode ();
  If (responseCode == HttpConnection.HTTP_OK) {}
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}
  public void run() {}
  Dialog.Alert ("- SUCCESSFUL CONNECTION-");
  }
  });
  }
  If (httpConn! = null) httpConn.close ();
  } catch (IOException e) {}
  System.Err.println ("IOException Caught:" + e.getMessage ());
  }
  }
  }
  }

  In fact, this code works very well... but I want to improve it, and I have a few questions:

  1. I think that right now, every time I click on the 'Connect' button, I start a new thread. I would like to end this thread in the "run" method, but I don't really know how to access the variable 'ct' from there.   Counsel on how to do it?  Or maybe always use the same thread until my application is closed?

  2. in the FieldChangeListener of my "Submit" button, I want to access the value of radio box.  I did work, but I had to do my 'final' variable  What is the right way to do it?

  3 - to display a dialog box with 'Successful connection', I just wanted to write something in my main screen.  How I do that?

  I'm just a bit confused as to just what set up when you use a separate thread.

  Thanks for your advice!

  Edit: Hidden URL I connect to...

  That's what I call a good question! (now I'm wondering why the forums do not work with opera correctly, in any case, here my baldy to the answer format): 1. your thread "dies" when it's over, no need to close it. 2 Yes 3. You can use a reminder. See for example http://www.javaworld.com/javaworld/javatips/jw-javatip10.html