Question about unknown status alert.

Similar Questions

• Unknown status alert

  I have about 50 iDRAC to OME - a mixture of iDRAC6 & 7. Every day I receive 1 or 2 of the following "Status unknown" alerts raised. Generally followed a warning of "Normal State" 50 to 70 seconds later. There is no visible trend for these, but the frequency makes OME virtually unusable due to the high number of false alarms.

  Is there a solution?

  

  Enterprise SNMP OID:. 1.3.6.1.4.1.674.11000.1000.100.1
  SNMP generic Trap OID: 6
  SNMP specific Trap OID: 3001

  Hi and thanks for the post.

  Your discovery range includes both iDrac IP and the IP of the server of this box as well Strip in the same range?

  I saw some people are having similar problems with lines configured in this way.

  There is also a setting preferred (preferences |) I think that the alerts).  On this screen, there is a single checkbox.  If this is true?  If so, you could try unchecking it.  What is OME send an alert to additional State for health change to the console.  The reason that it is for people who don't use SNMP.  Assuming that allows you to track your physical/alerts failures SNMP, you really don't need to have it checked.

  Let me know.  THX

  Rob

• Question about work load alerts

  vCOPs has been running in our environment for 10 months and more. So far it has been used more for critical alerts that analysis. We are trying to get a deeper understanding.

  5.8.1 running

  I read the following messages, but am still a little foggy on why we see what we see.

  https://communities.VMware.com/message/2396460#2396460
  

  https://communities.VMware.com/thread/449924
  

  We receive alerts alert network that demand is to reach 100% of the available resources.

  New alert Type: health, Sub-Type: workload, State: immediate, kind: HostSystem

  The application of the object: info is 100% capacity of available resource. Network is a limited resource.
  Alert type: health
  The attention of subtype: workload
  Alert: immediate
  Resource type: HostSystem

  We receive as critical network warns that demand 100% of available resources.

  Nalert Type ew: health, Sub-Type: workload, State: criticism, genre: HostSystem,
  The application of the object: info is 100% capacity of available resource. Network is a limited resource.
  Alert type: health
  The attention of subtype: workload
  Alert: critical
  
  

  If you look at the attached doc you can see actual usage during the alarm time is about 55% of the capacity and actual use during the critical alert is about 77% of the capacity.

  If the alerts are not an indication of actual use of NIC I'm not sure what we say the alerts.

  Any help would be appreciated.

  This network IO bar there is just the last collected metrics. You need to appear a metric chart, where draw you the overall badge | the workload for this host, as well as individual workloads of cpu/mem/disk/network. Look back the past 24 hours or 7 days... and you will see them fortification (vC Ops is not incorrect to say that you are 100 > 90). It is these spikes that can cause alerts. One option would be that you could reduce the alert for infrastructure. workload in config policy to not notify you when this product (alert system host workload). Or instead to drop quite alert, simply set the levels of warning/immediate not getting attention, the critical value to 100 and see what is happening (for the badge of infrastructure workload changes). However, probably if you let this long race, vC Ops will learn the maxObserved of the NIC and conditioned as well higher watermark beyond your normal percentage of 80/90/95 levels.

  For CAP / etc, you can ignore the e/s disk and network i/o, but not the case with the calculations of badge of health.  If you need to exclude individual components of the overall workload of a vSphere resource calculation, the only way is to stop the alerts on the overall badge "charge" and alert on the parameters of work of children... e.g. cpu | workload, mem | workload, etc.

  A lot of options... Try them and see what works best for you.

• Question about functioniality Tempo alerts

  Hello.
  It will be her stupid for most, but I don't know what to do with Tempo driver alerts as a new owner of the Satellite. The instructions are not clear, and I just downloaded 5.
  I now run an executable file in the downloaded files? I then move to a specific location? Any advice on this would be appreciated. Thank you

  If you want my opinion track: update of the last package of added value for your laptop model. You can find it on the Toshiba support under http://eu.computers.toshiba-europe.com page
  After completing disable tempo and enjoy your life.

• Question about Toshiba update alert

  Hello everyone.

  First of all, I'll give you my configuration:

  Toshiba Satellite P200.
  (I hope that's enough?)

  And now my problem:

  I noticed that the utility tool alert Toshiba (I don't remember the good reputation. It is the tool that warn you when the new update available for your pc/PC toshiba laptop and you give a link to the file) does not work anymore.
  Maybe I'm doing something wrong... I don't know.

  Where could I find this tool useful? (Download?)

  Thank you very much

  Hello

  Maybe you write on the TEMPO. If Yes check it please TOSHIBA TEMPOpage.

  Good bye

• Question about e-mail alerts

  Hi gurus,
  
  We use ODI 11 g.
  
  Currently we hard code the e-mail address in e-mail odi alerts.
  
  Suppose that we store the e-mail address in a unix text file or a table, so that those email addresses can be used when execution by ODI scenario.
  How to do this.
  
  Any ideas...
  
  
  Thank you
  Lony

  Create a procedure
  Side source: oracle technologies
  Select email_id EMAIL_ID e-mail

  Command on the target: technology: odiTools
  Put command for odiSendMail
  OdiSendMail '-MAILHOST = MAILHOST ""[email protected]""-TOPIC ALERT MAIL FROM ODI = ""-EMAIL_ID = #
  ALTERTMESSAGE

• Question about the status of the request

  Hi all
  
  I'm a newbie on OIM 11 g.
  
  I've set up an approval workflow that has two levels of approvals. The two levels of permissions are completed successfully, but the status of the application does not have to "request completed". The State of demand is showing that "Post operation begun treatment.
  
  Ask you please help me solve this problem. Please let me know what needs to be done for the State of the application to be replaced with "Request completed".
  
  Thanks in advance for your help.
  
  Thank you
  PT

  If you need to configure the provisioning of the claim,

  check the automatic backup, auto prepop.
  Cause first to do this, maybe after that requst it is a task that is not completed successfully. So make sure that any post after query process completed.

  -kuldeep

• Questions about unknown software in the new laptop (3 modules Cisco)

  Hello, (6c01ev of HP Pavilion DV6 Notebook PC - Windows 7 Home Premium 64-bit)

  I just informed me on 3 programs which are fitted with all the programs that came from the factory.,.

  and I don't know how necessary are to my duties to my laptop.

  Here are the 3 programs, which are the same company.

   

  1) cisco EAP-FAST Module
  2) cisco LEAP Module
  3) cisco PEAP Module

  All I want to know is...

  (A) these programs are necessary for the functionality of my laptop?

  (if I uninstall it, will I problem?)

  (B) with my laptop witch device these programs are linked?

  Thank you very much for your help

  Hello:

  If you have a network Atheros wireless card in your laptop computer, these programs have been installed by the Atheros wireless driver.

  They are probably not necessary for standard wireless connections.

  I had to actually uninstall a Dell ST PC Tablet, because they didn't allow the tablet to connect to my home network.

  No one will be able to tell you what impact they will have on your particular situation.

  If you have an Atheros wireless adapter and you decide to uninstall these 3 possibilities of use, and something goes wrong on you, then simply reinstall the Atheros driver and these applications must be reinstalled.

• Question about lights LED R7000

  Question about this quote from the Manual: "when the router is turned on, the light during approximately 10 seconds and then turn. If all lights lit, this indicates a fault in the router"my router lights LED is turned off. Are they supposed to? I discovered how manually to disable using genius. NETGEAR Nighthawk AC1900 is defective?

  I think the manual means just that at first they all turn on, then off for a few seconds. LED lights depending on what services are available.

  The power light should stay lit. Port LAN LED come on if a device is connected the WiFi LED (Amber on white, 100 M, 1000 m), are we if the radios are turned on. The Wan or the internet LED lights up if there is a connection to the internet. Some of them you can turn off via the user interface, but it is handy to have on so that you know the status.

  It looks like your router working normally.

• I read this topic (I have a lot of questions about Xperia Z2 with lollipop)

  Hello world. I read this topic (I have a lot of questions about Xperia Z2 with lollipop) and I have posted a question, but it seems that no one saw him. That means the following: (how can I install the source application unknown to other users in my phone because it is to the unknown source menu is disabled in the settings-> Security)? This means that I can not install all the apps if I switch to the lollipop? Can someone tell me please the exact meaning of this?

  Thank you.

  It's true, but game store will not need this option checked - loading of a file manager will - but which is not say that the application will work once installed

• Questions about discussions...

  Hello

  I have a new app to do that requires network access.

  I have read this EXCELLENT post from peter_strange:

  http://supportforums.BlackBerry.com/T5/Java-development/connecting-your-BlackBerry-http-and-socket-c...

  Because I can't use BIS - B because I'm not a partner of the Alliance, I wanted to take a look at the new OS 5.0 network API and see how it works.

  I know that network connections should be performed in a separate thread.

  I'm far from being an experienced Blackberry developer... so I have a few questions about discussions.  I looked around the Internet, read on the forum, read the documentation, did some tests and so far, I came up with this code:

  SerializableAttribute public class HTTPConnection extends UiApplication {}
  Public Shared Sub main (String [] args) {}
  HTTPConnection PAP = new HTTPConnection();
  theApp.enterEventDispatcher ();
  }

  public HTTPConnection() {}
  pushScreen (new HTTPConnectionScreen());
  }
  }

  class HTTPConnectionScreen extends form {}
  public HTTPConnectionScreen() {}
  setTitle ("HTTPConnection");
  Add (new RichTextField ("choose a type of connection :"));

  final RadioButtonGroup = new RadioButtonGroup() rbGroup;
  RadioButtonField radioButtonF1 = new RadioButtonField ("Direct TCP", rbGroup, false);
  RadioButtonField radioButtonF2 = new RadioButtonField ("WAP 1.0/1.1", rbGroup, false);
  RadioButtonField radioButtonF3 = new RadioButtonField ("WAP 2.0", rbGroup, false);
  RadioButtonField radioButtonF4 is new RadioButtonField ("BES/MDS", rbGroup, false);.
  RadioButtonField radioButtonF5 = new RadioButtonField ("BIS-B", rbGroup, false);
  RadioButtonField radioButtonF6 = new RadioButtonField ("WiFi", rbGroup, false);
  Add (radioButtonF1); Add (radioButtonF2); Add (radioButtonF3); Add (radioButtonF4); Add (radioButtonF5); Add (radioButtonF6);
           
  FieldChangeListener listener = new FieldChangeListener() {}
  ' Public Sub fieldChanged (field field, int context) {}
  ConnectionThread ct = new ConnectionThread (rbGroup.getSelectedIndex () + 1);
  CT. Start();
  }
  };
           
  ButtonField buttonField = new ButtonField ("Connect", ButtonField.CONSUME_CLICK);
  buttonField.setChangeListener (listener);
  Add (buttonField);
  }

  / * method of onSavePrompt override default to avoid being asked if I want to record every time * /.
  protected boolean onSavePrompt() {}
  Returns true;
  }
  }

  class ConnectionThread extends Thread {}
  private int transportType;
  public ConnectionThread (int n) {}
  transportType = tt;
  }
      
  public void run() {}
  ConnectionFactory connFact = new ConnectionFactory();
  ConnectionDescriptor connDesc = connFact.getConnection ("URL", transportType, null);
  If (connDesc! = null) {}
  try {}
  HttpConnection httpConn = (HttpConnection) connDesc.getConnection ();
  httpConn.setRequestMethod (HttpConnection.POST);
  httpConn.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");
  OutputStream out = httpConn.openOutputStream ();
  out. Write (Integer.ToString (transportType). GetBytes());
  int responseCode = httpConn.getResponseCode ();
  If (responseCode == HttpConnection.HTTP_OK) {}
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}
  public void run() {}
  Dialog.Alert ("- SUCCESSFUL CONNECTION-");
  }
  });
  }
  If (httpConn! = null) httpConn.close ();
  } catch (IOException e) {}
  System.Err.println ("IOException Caught:" + e.getMessage ());
  }
  }
  }
  }

  In fact, this code works very well... but I want to improve it, and I have a few questions:

  1. I think that right now, every time I click on the 'Connect' button, I start a new thread. I would like to end this thread in the "run" method, but I don't really know how to access the variable 'ct' from there.   Counsel on how to do it?  Or maybe always use the same thread until my application is closed?

  2. in the FieldChangeListener of my "Submit" button, I want to access the value of radio box.  I did work, but I had to do my 'final' variable  What is the right way to do it?

  3 - to display a dialog box with 'Successful connection', I just wanted to write something in my main screen.  How I do that?

  I'm just a bit confused as to just what set up when you use a separate thread.

  Thanks for your advice!

  Edit: Hidden URL I connect to...

  That's what I call a good question! (now I'm wondering why the forums do not work with opera correctly, in any case, here my baldy to the answer format): 1. your thread "dies" when it's over, no need to close it. 2 Yes 3. You can use a reminder. See for example http://www.javaworld.com/javaworld/javatips/jw-javatip10.html

• Unknown status under ITA

  Hello world

  ITA recently reported 10 servers PE2950 in the unknown state under the Group of servers.  I tried to solve the problem by performing a discovery/inventory of the affected server, unfortunately, the problem persists.

  To resolve this problem, I run the troubleshooting tool and determined that ITA was unable to talk to my server via SNMP.  I restarted the SNMP service on one of the affected servers and then made a discovery/inventory to solve the problem (status is returned to the green).

  Around the same time, I met this "unknown status" issues I have restart my DNS server.  I'm not sure if it was the root cause of the problem, however, I can solve all hostnames after the DNS server has restarted including the 10 affected servers.

  Could you please help me with the following questions?

  -What is the cause of this problem?

  -Do you recommend an easier way to restore the functionality on the remaining servers of unknown status?

  Thank you in advance,

  D

  Message edited by ddasilva99 on 07/05/2008 20:41
  
  

• Question about my script

  I have a question about my script and why Im not return desired output. Could someone please help me solve this and also let me know what I was doing wrong, why their working version vs my return empty result. Thanks in advance and have a nice day.

  Mike P.

  First of all, I ran this for a list of all virtual cards ovf all my virtual machines. It comes out OK but gave me too much, I was looking for something a little more specific.

  Get - VM | Get-NetworkAdapter | Select-Object Parent, name, NetworkName, ConnectionState

  the script above has given me all the names of VM, AdapterName, PortGroup name and the connection status of the adapter of the said

  I wanted to filter this down a little more. I was looking for netowrk adapters connected to a specific NetworkName with a ConnectionState connected object. Mainly because I have another script, I want to run after the fact that would make this particular NotConnected and NoStartConnected adapter.

  I thought I could do it with the following script. The script works fine without errors and filter unwanted information. However, my problem is that it does not return what it finds on the screen as the previous script. I'm missing a piece for this script that will give me the output of the screen for each card that meets the criteria. I tried out channelling to a .csv, of course, it was empty as well. I tried a failed in an echo statement after him as well.

  Get - VM | Get-NetworkAdapter | where {$_.NetworkName - eq "Network 1" - and $_.} ConnectioState - eq 'Connected'}

  Thanks again for your help!

  You can better use the operator contains this

  {$_.NetworkName -eq "Network 1" -and "Connected","NoGuestControl","StartConnected" -contains $_.ConnectionState}
  

  It checks if the value property is present in the array of values that you give on the left side

• Question about RAM CL

  Hi guys. I'm finalizing my PC build and I have a question about ram CL I can't find answers for hackers page here. http://ppbm7.com/index.php/news/planning?showall= & start = 3

  I would use these two RAM sticks for example.

  Module 240 pin DDR3-1333 transcend JetRam™ 8 GB High Performance: CL9, layer 6 circuit board

  Transcend JetRam™ High - Performance 8 GB DDR3-1600 240-Pin Module: CL11, 6 layer PCB, ultimate card stability and cross-platform compatibility

  My question is, what is the best for video editing? On the one hand we have 1333 mhz to with a CL of 9. On the other hand, we have RAM 1600 mhz faster, but at a higher CL of 11. Now, I'm not one to get caught up in the technical aspects as it may seem, but I don't understand so I can make decisions, especially when price is a factor. In this case however, they are at the same price...
  

  Well good for video editing, important criteria for RAM is:

  • Never, never crashes - it is very important; choose only RAM sticks (certified QVL) certified provider and do not use unmatched sticks
  • Speed; faster is better - while true also, past at the speed of the RAM, or lowering of the CASE wait cycles (latency) contribute to the speed, but the gains are very low; Faster RAM is hardly perceptible vs CPU speed more fast which is very sensitive (I played with it a lot on some versions overclock and test first with PPBM speed and speed up the processor 5% performance contributes to 5% where speed RAM about 30% can speed up about 1%)

  Google "what is the CASE for the RAM" and one week at self-teaching yourself if you want to even begin to really understand speed RAM! I know enough to know there is a lot to learn about the subject. The good news is that you don't need really to know a lot to build a reliable, excellent for running Adobe products, including the first, Photoshop and After Effects:

  • Use only RAM who has certified the seller of memory for your motherboard; do not assume that if the seller indicates a set 4x8Go of sticks that will work with your motherboard that two sets of such RAM will work with a card mother 8 locations either! (too late to discuss here, but various factors may override the controller memory in the processor itself - factors include voltage RAM, number of sticks, RAM clock, status of CASE of waiting settings speed, voltage of the cpu memory controller and maybe more)
  • Increasing the speed of the RAM always helps if slightly for first speed up to 1600 MHz (for x 79 in any case) and wins the speed of RAM which are still lighter

  Now, back to why both sets of sticks are the same cost. They most likely use the same chips of RAM, which is an important factor for what it costs to build the RAM sticks. While the Asus motherboard you buy allows full customization of many, many, many things, unless you are an extreme Overclocker and plan to spend a few weeks to fine-tune a new simple version you in the bios of motherboard and it say to use XMP settings. This indicates the motherboard, how to set the speed of the RAM and sticks of timings CASE for your particular RAM with the settings the seller intended.

  You really know a lot about what you are doing to set the timings RAM in any way other than the simple choice of XMP settings safely. And, you can easily burn your CPU if you don't know what you're doing and you choose some really bad parameters.

  Kind regards

  Jim

• Question about the need to connect every 30 days...

  I understand the need for CC programs to connect to license Adobe servers, every 30 days (or it's 99, since I have an annual license?) of re - check license status.  That said, I have a question about the timing of these connections the licence renewal.

  What happens if I happen to be disconnected so far here 30?

  With the help of Microsoft for example...  I need Visual Studio to reactivate my developers license every 30 days in order for me to develop applications Windows 8 'metro '.  If I happen to be disconnected so far here 30, I am unable to work on any apps 'metro' until I got online.  (And I don't see any way to tell him to reactivate at the beginning).

  What happens with Adobe CC?

  Suppose I have license, and I am online for 29 days.  Then, the 30th day, I find myself be in offline mode when I start one of the programs of CC.  Now what?  Does the 30-day clock 'reset' every now and then during this time, or is it really only try every 30 days, and I have to be online on that day?

  Hi kenbrody,

  Please see the thread: http://forums.adobe.com/thread/1190831 .

  Kind regards

  Romit Sinha