Question about functioniality Tempo alerts

Similar Questions

• Question about Toshiba update alert

  Hello everyone.

  First of all, I'll give you my configuration:

  Toshiba Satellite P200.
  (I hope that's enough?)

  And now my problem:

  I noticed that the utility tool alert Toshiba (I don't remember the good reputation. It is the tool that warn you when the new update available for your pc/PC toshiba laptop and you give a link to the file) does not work anymore.
  Maybe I'm doing something wrong... I don't know.

  Where could I find this tool useful? (Download?)

  Thank you very much

  Hello

  Maybe you write on the TEMPO. If Yes check it please TOSHIBA TEMPOpage.

  Good bye

• Question about work load alerts

  vCOPs has been running in our environment for 10 months and more. So far it has been used more for critical alerts that analysis. We are trying to get a deeper understanding.

  5.8.1 running

  I read the following messages, but am still a little foggy on why we see what we see.

  https://communities.VMware.com/message/2396460#2396460
  

  https://communities.VMware.com/thread/449924
  

  We receive alerts alert network that demand is to reach 100% of the available resources.

  New alert Type: health, Sub-Type: workload, State: immediate, kind: HostSystem

  The application of the object: info is 100% capacity of available resource. Network is a limited resource.
  Alert type: health
  The attention of subtype: workload
  Alert: immediate
  Resource type: HostSystem

  We receive as critical network warns that demand 100% of available resources.

  Nalert Type ew: health, Sub-Type: workload, State: criticism, genre: HostSystem,
  The application of the object: info is 100% capacity of available resource. Network is a limited resource.
  Alert type: health
  The attention of subtype: workload
  Alert: critical
  
  

  If you look at the attached doc you can see actual usage during the alarm time is about 55% of the capacity and actual use during the critical alert is about 77% of the capacity.

  If the alerts are not an indication of actual use of NIC I'm not sure what we say the alerts.

  Any help would be appreciated.

  This network IO bar there is just the last collected metrics. You need to appear a metric chart, where draw you the overall badge | the workload for this host, as well as individual workloads of cpu/mem/disk/network. Look back the past 24 hours or 7 days... and you will see them fortification (vC Ops is not incorrect to say that you are 100 > 90). It is these spikes that can cause alerts. One option would be that you could reduce the alert for infrastructure. workload in config policy to not notify you when this product (alert system host workload). Or instead to drop quite alert, simply set the levels of warning/immediate not getting attention, the critical value to 100 and see what is happening (for the badge of infrastructure workload changes). However, probably if you let this long race, vC Ops will learn the maxObserved of the NIC and conditioned as well higher watermark beyond your normal percentage of 80/90/95 levels.

  For CAP / etc, you can ignore the e/s disk and network i/o, but not the case with the calculations of badge of health.  If you need to exclude individual components of the overall workload of a vSphere resource calculation, the only way is to stop the alerts on the overall badge "charge" and alert on the parameters of work of children... e.g. cpu | workload, mem | workload, etc.

  A lot of options... Try them and see what works best for you.

• Question about unknown status alert.

  Hello, we have M620, OME 1.3.1 environment.

  

  

  Issue.

  (1) what mean this alert?

  (2) how to avoid that this alert? I have already applied to speed election changed slowly

  

  (3) can we ignore this alert?

  

  Hi Lee,.

  If the State of health of the device then changes to a stranger in the status survey OME automatically generates this alert to say that the health of the device has changed.

  If you don't want to see these alerts, you can disable this alert settings option in the preferences. Uncheck the box enable internal health alerts and you will not see these alerts.

• Question about e-mail alerts

  Hi gurus,
  
  We use ODI 11 g.
  
  Currently we hard code the e-mail address in e-mail odi alerts.
  
  Suppose that we store the e-mail address in a unix text file or a table, so that those email addresses can be used when execution by ODI scenario.
  How to do this.
  
  Any ideas...
  
  
  Thank you
  Lony

  Create a procedure
  Side source: oracle technologies
  Select email_id EMAIL_ID e-mail

  Command on the target: technology: odiTools
  Put command for odiSendMail
  OdiSendMail '-MAILHOST = MAILHOST ""[email protected]""-TOPIC ALERT MAIL FROM ODI = ""-EMAIL_ID = #
  ALTERTMESSAGE

• Questions about discussions...

  Hello

  I have a new app to do that requires network access.

  I have read this EXCELLENT post from peter_strange:

  http://supportforums.BlackBerry.com/T5/Java-development/connecting-your-BlackBerry-http-and-socket-c...

  Because I can't use BIS - B because I'm not a partner of the Alliance, I wanted to take a look at the new OS 5.0 network API and see how it works.

  I know that network connections should be performed in a separate thread.

  I'm far from being an experienced Blackberry developer... so I have a few questions about discussions.  I looked around the Internet, read on the forum, read the documentation, did some tests and so far, I came up with this code:

  SerializableAttribute public class HTTPConnection extends UiApplication {}
  Public Shared Sub main (String [] args) {}
  HTTPConnection PAP = new HTTPConnection();
  theApp.enterEventDispatcher ();
  }

  public HTTPConnection() {}
  pushScreen (new HTTPConnectionScreen());
  }
  }

  class HTTPConnectionScreen extends form {}
  public HTTPConnectionScreen() {}
  setTitle ("HTTPConnection");
  Add (new RichTextField ("choose a type of connection :"));

  final RadioButtonGroup = new RadioButtonGroup() rbGroup;
  RadioButtonField radioButtonF1 = new RadioButtonField ("Direct TCP", rbGroup, false);
  RadioButtonField radioButtonF2 = new RadioButtonField ("WAP 1.0/1.1", rbGroup, false);
  RadioButtonField radioButtonF3 = new RadioButtonField ("WAP 2.0", rbGroup, false);
  RadioButtonField radioButtonF4 is new RadioButtonField ("BES/MDS", rbGroup, false);.
  RadioButtonField radioButtonF5 = new RadioButtonField ("BIS-B", rbGroup, false);
  RadioButtonField radioButtonF6 = new RadioButtonField ("WiFi", rbGroup, false);
  Add (radioButtonF1); Add (radioButtonF2); Add (radioButtonF3); Add (radioButtonF4); Add (radioButtonF5); Add (radioButtonF6);
           
  FieldChangeListener listener = new FieldChangeListener() {}
  ' Public Sub fieldChanged (field field, int context) {}
  ConnectionThread ct = new ConnectionThread (rbGroup.getSelectedIndex () + 1);
  CT. Start();
  }
  };
           
  ButtonField buttonField = new ButtonField ("Connect", ButtonField.CONSUME_CLICK);
  buttonField.setChangeListener (listener);
  Add (buttonField);
  }

  / * method of onSavePrompt override default to avoid being asked if I want to record every time * /.
  protected boolean onSavePrompt() {}
  Returns true;
  }
  }

  class ConnectionThread extends Thread {}
  private int transportType;
  public ConnectionThread (int n) {}
  transportType = tt;
  }
      
  public void run() {}
  ConnectionFactory connFact = new ConnectionFactory();
  ConnectionDescriptor connDesc = connFact.getConnection ("URL", transportType, null);
  If (connDesc! = null) {}
  try {}
  HttpConnection httpConn = (HttpConnection) connDesc.getConnection ();
  httpConn.setRequestMethod (HttpConnection.POST);
  httpConn.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");
  OutputStream out = httpConn.openOutputStream ();
  out. Write (Integer.ToString (transportType). GetBytes());
  int responseCode = httpConn.getResponseCode ();
  If (responseCode == HttpConnection.HTTP_OK) {}
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}
  public void run() {}
  Dialog.Alert ("- SUCCESSFUL CONNECTION-");
  }
  });
  }
  If (httpConn! = null) httpConn.close ();
  } catch (IOException e) {}
  System.Err.println ("IOException Caught:" + e.getMessage ());
  }
  }
  }
  }

  In fact, this code works very well... but I want to improve it, and I have a few questions:

  1. I think that right now, every time I click on the 'Connect' button, I start a new thread. I would like to end this thread in the "run" method, but I don't really know how to access the variable 'ct' from there.   Counsel on how to do it?  Or maybe always use the same thread until my application is closed?

  2. in the FieldChangeListener of my "Submit" button, I want to access the value of radio box.  I did work, but I had to do my 'final' variable  What is the right way to do it?

  3 - to display a dialog box with 'Successful connection', I just wanted to write something in my main screen.  How I do that?

  I'm just a bit confused as to just what set up when you use a separate thread.

  Thanks for your advice!

  Edit: Hidden URL I connect to...

  That's what I call a good question! (now I'm wondering why the forums do not work with opera correctly, in any case, here my baldy to the answer format): 1. your thread "dies" when it's over, no need to close it. 2 Yes 3. You can use a reminder. See for example http://www.javaworld.com/javaworld/javatips/jw-javatip10.html

• Where can I ask a handful of general order questions about Firefox OS as a consumer and get the answers? (a forum or something similar)

  I have about seven questions about Firefox OS. I'm potentially interested in opting for a tablet that works instead of Android or iOS. I couldn't find a place to ask questions like that. Thank you!

  https://support.Mozilla.org/en-us/forums/Firefox-OS-English-Forum

  There is another option.

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• Where and how do I ask questions about Email?

  The Commission opening thingy is complicated, I have trouble finding my way around it.  I don't know where or how questions about email.  Is there an easier way than trawling through all these icons?  Like a list or something - as you get on all other forums on the internet?

  It would be a good starting point: Mac mini

  Or the appropriate under MAC Os and system software section.

  You might also find this useful: find answers and new questions

• Many questions about the HP 50 g

  I just ordered a HP 50 g graphic calculator! I have a few questions about this so hang on tight! What is the USB connector on the calculator? Mini-USB, micro USB, or is it a connector owner, "custom". Then, it would be possible to connect a keyboard to the HP 50 g by using the USB Port? Is there a program that would make this possible? (I doubt it would work if you plug it..) I have a Mini-USB to female USB 2.0 connector. So I could just plug the keyboard right, provided that the port on the calculator is a Mini-USB Port. If this is not so that I could use my female to female USB adaptor to connect the keyboard.

  Thanks for your help,

  Zekelegge

  Hi!, zekelegge:

  Welcome to Forum!

  The only printer I use, 50G calculators, 48GII, 39GS and 17BII +, as well as many former models, such as the 48 s/SX/G/G + / GX, 38 G, 39 G, 42, 41 C/CV/CX and 28 C/S, is the infrared printer HP 82240 b. If you can use the emulator HP50G, on the PC, the simulator of the printer, you can download, since... http://www.HPCalc.org/details.php?id=7386

  The printer... HP 82240 B

  

  The cable series...

  

  The description... http://www.allenwan.com/hpcalcserialcable/

  The original cable...

  

• Question about warranty after exchanges of RAM on Satellite module series

  Hello together,

  I have a question about the warranty. My laptop is 5 months old and now I want to improve it with more RAM. I want to do it myself, and now I'm wondering if the warranty will be getting hurt.
  Thanks in advance for your answers.

  Concerning

  TiG3r

  For new models of laptops the RAM upgrade described in s operating manuals. It is public act and it shows the owner of the notebook how do RAM upgrade only.

  If Toshiba offers something like this he won't have the negative influence of valid warranty.
  Buy a compatible module and RAM upgrade.

  Bye and good luck!

• A few quick questions about the Satellite P300 - 18 M

  Hello

  I am about to order a Satellite P300 - 18 M and have just a few questions about this:

  (Although these may apply for other similar Satellite/Equium P300.)

  Is the touchpad made by / to use the Alps or Synaptics driver?

  It has the Wireless N network card, is the map made by Intel or Realtec?

  And also, someone has experience with face recognition software to connect?

  If so, does it take a lot of time to initalise?

  Thanks in advance,
  Jack

  Hello

  The P300 - 18M belongs to the PSPCCE series.
  It uses the two touchpad drivers. Synaptics & Alps Electric
  There is an Intel 802.11agn minicards WLan installed

  The face recognition is a nice tool but local to be illuminated and you must take your face the right of the post sometimes it of not very easy

  But if you face is recognized correctly that the connection should work properly

  See you soon

• Questions about nb200

  I recently bought a mini nb200 with windows 7 and I have a few questions about it. How can you set up your email, I was willing to put up with Outlook Express, but I don't know if I can. Also, is there a way to get a paper copy of the user manual?

  You can download and install a new e-mail program when you download Windows Live via Microsoft Update. You can select the components of Windows Live, you want to include by checking a box for each you want. I installed all the. Or you can use Outlook, if you have Microsoft Office and you want to install it.

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• Satellite L650-11R - a few questions about this

  Hello there :-)

  I have a few questions about my new L650.

  I've never had Toshiba notebook before so I apologize if some of these "quirks" are actually quite normal on this laptop. I really want to hear the views of other users L650.

  1)
  First of all, by the time I turned it on I saw gradient thin (1-2 mm) along the right edge of the screen that goes from the bottom up. Maybe "degraded" isn't the right word, but it seems that since two or three pixels are kind of discoloration or lose brightness/sharpness to the edge along the straight bezel. It is not really that visible, looks like the colors are desaturated a bit here or brightness is a bit lacking. He can be seen everywhere (bios or no color in Windows, but better in the lighter background).
  The left side (or other) seems ok, all this along the right edge is somewhat suspicious. If one can compare? I don't know if it's something to worry about or is just supposed to be like that.

  2)
  The other thing I noticed heating of the processor (Intel i3 330M) and GPU (ATi Mobility Radeon 5650). It's pretty hot here right now (I would say that the temperature is around 28 degrees Celsius when using cell phones). He is sitting on the hard surface (table) and nothing is blocking the vents.
  However, at "rest" (surf the web & regular light stuff), average CPU temp hovers around 58 ° C. It usually goes from 45 to 62 in just a few minutes after starting, and then I can hear and see (Toshiba PC Health Monitor) evacuate the kicks in. Temp goes back to 50 +, event stops and then the temp rises to 60 + until the vent is used again.
  During load full (Prime95 or some games), CPU is going all the way up to 75 degrees (the highest being 77). Fan runs at 75 to 77% during this time, never go faster.

  GPU idling is usually around 5 degrees above temp CPU (62-65). During full load (for example. Benchmark of Far Cry 2), I see a lot of stuttering with the latest drivers Catalyst and DX10 (not sure if the stuttering has something to do with heat), otherwise it is ok (no artifacts or anything like that). Temp of GPU during the loading goes up to 74-75, fan speed is locked at 30%, the frequency of the heart 5650 is 450 MHz. left side of the laptop (vent and below) is pretty hot, while the keyboard is warm (or slightly warmer who who).

  These time seems correct and safe in the long term? I'd rather events works all the time (they aren't really very strong) and keeping time less than 50, but there are just wishful pious bios control events and I can't control not the bios. :-)

  3)
  This is just General related products. :-)
  Official specifications of Toshiba L650 say ATi 5650 (between other low range GPU), but I saw a few specifications calling for there 5730 (same model 11R). Is there really a Satellite L650 with ATi 5730 GPU models?

  Sorry for the long post, I tried to include the best possible description that I could do. :-)

  Thank you in advance.

  Thanks for the additional info!