Question about LogMiner Viewer GUI

Similar Questions

• Questions about LogMiner.

  Greetings. We use 11G and have installed OEM, but not DB Diagnostic Pack. I have a few questions about this utility:

  (1) can be used if the Pack diagnosis DB is not installed? I ask because I know that some of these utilities are not available if it is not.

  (2) I know that I need to enable logging extra to use it. Is there any show / General cool space that are associated with?

  (3) are there any air show with the help of LogMiner itself? In particular, I could see what happens if analyzes the current journal.

  (4) what the tool commonly used to determine what query performance caused problems for awhile?

  Thank you!

  1 Yes. It is not part of a pack.
  2 of course additional recording will result in repeat. The impact on performance is usually not noticeable.

  3 the result of mining is placed in the shared pool and queries on v$ logmnr_contents ask shared pool this may cause reduced performance.

  4 n ° do not forget that you are again mining. This means DML. Selects won't be in your recovery.

  -------------

  Sybrand Bakker

  Senior Oracle DBA

• Question about creating view

  Hi all

  for example, I need to give permission for a user that has select permission on a table, but I need to hide certain columns in the table for that user.

  I know for this application there need create a view and assign the columns needed to this point of view, then give

  access to select this point of view of a user.

  My question is: this view will affect anything if I create? He will take the tablespace volume?

  Or there is no effect and I can create?

  the table to which it is necessary to create point of view is very large.

  
  

  A view is nothing else than a stored query, so no, it's not going to take place to create, with the exception of a very trivial amount of space in the data dictionary to store the definition.

• Questions about the views system...

  Hello
  
  (1) why this 2 queries are not similar?
  
  Select count (*) from SAMPLE_TABLE;
  Select num_rows from user_all_tables where table_name = 'SAMPLE_TABLE. "
  
  (2) in the views system, I can learn about primary piece?
  
  (3) where I can the description of each of the views system and what information it contain?
  
  Best.

  (a) the statistics in views because _TABLES are only updated when you calculate freshly statistics, while the number of rows in a table established by count (*) is dynamic and always up-to-date.
  (b) what do you know about primary keys? The columns that make up their, for example? USER_CONSTRAINTS where constraint_type = 'P' will tell you what primary key constraints exist and the indexes are used to enforce them. You can then do a query of USER_INDEXES and USER_IND_COLUMNS to work on the columns are part of these indices, where they are stored and so on.
  (c) the official documentation lists each view (see part II of this page, for example: http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/toc.htm)

• a question about VMware View

  Hello

  I want to know when we prepare a parent VM and install us one application on which allowed as Kaspersky endpoint security or other, what is happening with this when the composer creates the linked clones? How the linked clones take permit?

  and if the virtual machine is not persistent (I mean whenever a client connects to it, she creates, and every time it disconnects the virtual machine will be deleted) then what happens to software with license? and what about the name of the computer? and what is being added to the Active directory?

  Thank you

  Thank you Mohammed.

  applications there volume licenses? What is the difference between the volume licensing and standard license and how do we get it?

  Thanks again

  My best regards

• Questions about VMware View

  Hi, I need to provide always on desktops to remote 50 users. I have been using VMware workstation to provide these desktop computers, but it was a temporary solution that is quick and easy.

  I started by installing the free ESXi which works fine except that these virtual machines are running an application that requires DirectX. When reading information VMware views looks like it's maybe the solution I need, but I can't say if she can provide always on workstations or if desktop computers are provided according to the needs. My 2nd concern is cost. I don't mind spending the money for VMware View, but looks like I have to have seen running in AD and that it will require me to install many other products such as VMware infrastructure 3.5. Someone has some good links to install VMware View and the provisioning of desktops?

  When you purchase View 4.5, business or first, you get ESX and vSphere vCenter / I.  If you are supported on this part.  You don't need to buy that separately.

  With respect to reviews, the guides are:

  To start using the doc started get: http://pubs.vmware.com/view45/ol/wwhelp/wwhimpl/js/html/wwhelp.htm#href=get_started/t_getstarted.html

  http://www.VMware.com/files/PDF/VMware-View45-evaluators-Guide.PDF -> is excellent for your POC on VMWare View.

  http://www.vmware.com/pdf/view45_installation_guide.pdf -> installation guide.

  You will need to have Active Directory in your environment.  View is used to automatically configure your desktop to your users.

  If you use clones of link or local mode (the ability to check your workstations), then you will need to Prime Minister, Enterprise edition will be beneficial.

  Hope this helps,

  Larry

• Question about Get-View

  Note:

  I use () instead of media because this page don't like the media.

  Hello

  For some reason when I use the following code:

  Get - VM | Get-View | % {

  $_. CustomFields ("Barcode")

  I get a cannot index into a table null error.

  But... If I use this code:

  $Vms = get - VM

  {foreach ($vm to $vms)

  $Vm.CustomFields ("Barcode")

  }

  It takes more time, but it works without error.

  Does anyone know why this is? Is there a known issue with the cmdlet Get-view?

  Thank you

  Looking to 2 things different here.

  The Get - Vm cmdlet returns a VirtualMachineImpl object that contains the CustomFields property.

  Get - VM | Get-views as you watch a VirtualMachine object that has a property customValue (but no CustomFields property).

• Question about a view inline or function within SQL

  Hi all
  
  
  I would like to know if using a view inline with a sql query is better or a call of function within the sql query is preferable.
  
  When I check the plan explained in both cases I see no difference in the cost.
  
  Appreciate your valuable suggestions on this.
  
  
  Thank you
  Maddy K.

  A function of a query will be worse than an inline view, given the context of switching between SQL and PL/SQL engines.

  See http://asktom.oracle.com/pls/apex/f?p=100:11:0:P11_QUESTION_ID:60122715103602
  Bonus http://www.oracle.com/technetwork/database/features/plsql/overview/doing-sql-from-plsql-129775.pdf

• question about a view that I have created to solve performance problems

  Dear alll;
  
  I have an interesting problem. I created a view to help solve some performance problems, I've had with my query
  
  See below
  

  create or replace view view_test as 
  
  Select trunc(c.close_date, 'YYYY-MM-DD') as close_date, t.names
  from tbl_component c, tbl_joborder t
  where c.t_id = t.p_id
  and c.type = 'C'
  group by trunc(c.close_date, 'YYYY-MM-DD'), t.names
  ;

  and I tried test the view using the following syntax and I get the following errors
  

  select k.close_date, k.names from view_test k
  where k.names = 'Kay'
  and k.close_date between to_date('2010-01-01', 'YYYY-MM-DD') and to_date('2010-12-31', 'YYYY-MM-DD')

  However, I get the below error messages
  

  ora-o1898: too many precision specifiers

  I Googled it and tried a lot of things online but I can't solve the problem unfortunately, and I don't know why.
  
  
  
  

  What you trying to accomplish with TRUNC:

  SQL> select trunc(sysdate, 'YYYY-MM-DD') from dual;
  select trunc(sysdate, 'YYYY-MM-DD') from dual
                        *
  ERROR at line 1:
  ORA-01898: too many precision specifiers
  

  I think you meant simply TRUNC (c.close_date)

• Satellite L650-11R - a few questions about this

  Hello there :-)

  I have a few questions about my new L650.

  I've never had Toshiba notebook before so I apologize if some of these "quirks" are actually quite normal on this laptop. I really want to hear the views of other users L650.

  1)
  First of all, by the time I turned it on I saw gradient thin (1-2 mm) along the right edge of the screen that goes from the bottom up. Maybe "degraded" isn't the right word, but it seems that since two or three pixels are kind of discoloration or lose brightness/sharpness to the edge along the straight bezel. It is not really that visible, looks like the colors are desaturated a bit here or brightness is a bit lacking. He can be seen everywhere (bios or no color in Windows, but better in the lighter background).
  The left side (or other) seems ok, all this along the right edge is somewhat suspicious. If one can compare? I don't know if it's something to worry about or is just supposed to be like that.

  2)
  The other thing I noticed heating of the processor (Intel i3 330M) and GPU (ATi Mobility Radeon 5650). It's pretty hot here right now (I would say that the temperature is around 28 degrees Celsius when using cell phones). He is sitting on the hard surface (table) and nothing is blocking the vents.
  However, at "rest" (surf the web & regular light stuff), average CPU temp hovers around 58 ° C. It usually goes from 45 to 62 in just a few minutes after starting, and then I can hear and see (Toshiba PC Health Monitor) evacuate the kicks in. Temp goes back to 50 +, event stops and then the temp rises to 60 + until the vent is used again.
  During load full (Prime95 or some games), CPU is going all the way up to 75 degrees (the highest being 77). Fan runs at 75 to 77% during this time, never go faster.

  GPU idling is usually around 5 degrees above temp CPU (62-65). During full load (for example. Benchmark of Far Cry 2), I see a lot of stuttering with the latest drivers Catalyst and DX10 (not sure if the stuttering has something to do with heat), otherwise it is ok (no artifacts or anything like that). Temp of GPU during the loading goes up to 74-75, fan speed is locked at 30%, the frequency of the heart 5650 is 450 MHz. left side of the laptop (vent and below) is pretty hot, while the keyboard is warm (or slightly warmer who who).

  These time seems correct and safe in the long term? I'd rather events works all the time (they aren't really very strong) and keeping time less than 50, but there are just wishful pious bios control events and I can't control not the bios. :-)

  3)
  This is just General related products. :-)
  Official specifications of Toshiba L650 say ATi 5650 (between other low range GPU), but I saw a few specifications calling for there 5730 (same model 11R). Is there really a Satellite L650 with ATi 5730 GPU models?

  Sorry for the long post, I tried to include the best possible description that I could do. :-)

  Thank you in advance.

  Thanks for the additional info!

• Satellite U405D - several questions about overheating/disassembly/upgrading etc.

  Hello

  I have several questions about my old one by Satellite U405D-S2910

  1. when it works, after 2-3 hours (I run usually small programs such as safari, msn messenger and bsplayer) CPU gets 85 to 90 C (178-188). When I play age of Empires 2 (come on, its an old game) like 2-3 hours, it stops. What could be the possible reason? Furthermore, let me inform you about the climate of the city I live, 30 c temperature - humidity 25-35% (today).
  PS. CPU is AMD Turion 64 X 2 Dual-Core Mobile Processor. Model RM-74

  2. I'm going to disassemble my laptop in order to clean its cooling units (I think at the rate of overheating is this). It does seem like a desktop computer, so complicated. Ive seen a disassembly not to not (btw, its so difficult to spell dismantling :) I think Im going to do this. What are your suggestions on this subject? experiences could help me?

  3. my laptops is Ram 2x2gb PC5300 DDR2 667 MHz SDRAM memory, I want to replace RAM memory 2x2gb MACH XTREME DDR2 1333 MHZ CL9 NOTEBOOK. Should I do it? Fit my portable, stable work? any suggestions?
  PS. motherboard chipset AMD M780V

  4 - Finally :), should I use OS 64 - bit or 32-bit OS (win7)? what OS would you use if you were me?

  Thank you.

  Hey Buddy,

  1 + 2. I think everything is related to a higher internal temperature and you must clean your laptop using a jet of compressed air. That is why it s not necessary to remove, just blow softly and soon the air through the laptop. You can buy such compressed air which squirts of each computer store I think and it takes only 5 minutes.
  You can find a useful article about this here:

  3. in my opinion he should forget this update! The speed of the RAM is related to the FSB of the CPU and as much as I know about Satellite U405D it s 667 MHz so it s already the RAM faster than you can have. Save your money and buy a larger HARD drive or in the best case a SSD that can really improve the performance!

  4. in my view, the answer is clear: Windows 7 64-bit.
  Only a 64-bit OS supports full 4 GB of RAM. ;)

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Hello Mr President! I have a few questions about the Word report generation please.1.How can I add a border to a page in word? 2. How can I add gridlines to a table generated related word?. Can 3. how I add a border to a picture of the Word report?. Thank

  Hello!

  Sir, I have a few questions about generating word reports using (C language in labwindows) please.

  1. How can I add a border to a page in word?

  2. How do I add border lines and grid to a table generated in Word report (not "cvi control table"inserted from gui, I wonder about the table generated in Word report)?

  3. How can I fill a table cell of report word with the data type other than 'character '.

  And sir a question on the use of the timer in labwindows cvi please.

  Sir, I'm trying to set a time minimum interval timer to 1millisecond (0.001 s), that I have set, timer cares about the interval set by me he only meets the minimum default time interval which is, I think as 10milliseconds (I'm using windows xp service Pack 3 version 2002).

  Concerning

  Imran

  Pakistan

  Have you read this statement ? It explains how to set the registry value:

  If the REG_SZ useDefaultTimer does not already exist, you must create it under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\CVI Run-Time Engine\cvirte. "" This can be done navigate to the appropriate folder, and then click Edit "New" string value. Then, click on means the name of the new value created, select Rename, and then specify useDefaultTimer as the name. Finally, double click on the name and specify the value True or False.

• Ask questions about the HP Pavilion 14-V041TX Bluetooth

  Hello, sry for asking questions about simple things.

  How to activate bluetooth for laptop HP Pavlion 14-V041TX?

  Or how to bluetooth to detect other bluetooth devices?

  coz already try to use my smartphone, but cannot detect any bluetooth device or laptop.

  for what I know, I already install the driver for bluetooth.

  Maybe there's another driver, that I'm missing?

  Thank you.

  SRY for my bad English.

  HI @Ton1_qrenz ,

  Welcome to the HP Forums!

  It's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  No worries about your English.  I believe that I understand your question, and if not, you can specify if you must post back.

  I understand that you are unable to detect Bluetooth devices.

  Here is a document to help you with this company. There are links that it contains other documents that can also be of assistance.

  Understand and troubleshoot Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

  If the problem persists, try the following steps.

  Step 1. Go to Device Manager
  Step 2. Right click on "Bluetooth device" you want
  Step 3. Select "update driver software... »
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)"
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  If you are unable to connect to a Bluetooth device, try the following:

  Step 1. Search for 'Change device' in the start menu in Windows 8.
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device app option
  Step 5. Click on save changes to save the settings that you select

  So, you can try this

  Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
  Step 2: Now find 'Bluetooth Support Service' and double click it
  Step 3: Now click on the Log on tab and type "Local Service" without the quotes
  Step 4. Click on "account".
  Step 5: Now remove any authorization of passwords the password field blank
  Step 6: Below the upper left title should be a hyperlink 'Start' click

  You can also view tab management power and unchecked the box "Allow the computer to turn off this device to save power."

  If it is still not resolved, I suggest contacting HP support for further assistance.

  Please contact our technical support at the 800-474-6836. If you are outside the United States / Canada region, please click the link below to get help from your region number. Phone goes everywhere in the world

  Good luck!

• General question about the Browser element

  Will look for an alternative, I found the Browser element and now I have a few questions about that:

  As I am not yet experienced on the Interfaces of Java development, I was wondering if following senario is possible:

  Have some HTML Pages which do the job of the Interface.

  If you submit a form, the JAva Base program (the Master application) process all Information.

  If you are viewing a list, the info is from a json of the Base program output.

  As the Communication Server Client HTML, the only difference is, that all communications remains inside the app.

  Is this possible?

  I can't speak to the idea of dealing with the entry of html, but I can confirm that it is possible for an application program to create a html page and providing the BrowserField for display.