Question about network vMotion of the Ferguson VCP5 CERT Guide book.

Similar Questions

• I have a Photosmart C7280 and s question about a decision of the network.

  I currently have two workstations connected to a router via ethernet cables.  They are connected to a single (not HP) printer with USB cable through a USB switch.  Two laptops to connect to the wireless router.  I could replicate the existing configuration with the C7280, but the idea of a network in which the laptops were allowed to participate is very attractive.  One of the laptop is running Windows version 7, the other computers running Linux.  If I go for an ethernet network, the laptops will be able to connect to the printer via the router?  If I go for a wireless network, desktop computers will be able to connect to the printer via their ethernet cables?  A couple of Wireless USB adapters are a possibility.

  I understand that you have questions about networking with your printer.

  Yes, wired network connections will be no problem to connect to a wifi connected printer.  Most routers bridge cable and wireless to work as a single network.  There are some routers between wired and wireless networks, but these are before any company grade routers and network equipment.

  A wired desktop computer will be able to print to a wireless printer as long as it is connected via the same router.  Conversely, a wireless computer can print to a printer connected Ethernet as long as it's the same router.

  I recommend using a network for the printer configuration, if possible, to avoid printing problems.  USB hubs have been known to cause printing problems, although this isn't always the case.

• Protégé M200: Question about Vista TPM and the Bitlocker

  You want to know if I have a TPM chip to launch bitblocker on the M200 using Vista. Just call Toshiba Technical Support - the guy was totally distraught!

  If I don't have a TPM chip, then I can install it?

  Hello

  It is a good question. To my knowledge the Portege M200 does not support TPM but the Portege M400, R400 module and the R200

  But the Bitlocker, which is only available on the Vista Enterprise and ultimate can also be used without the TPM chip but then some functions are not available; for example, the SecureBoot.
  Without TPM only the OS volume encryption is available.
  In this case you can encrypts the entire Windows volume including both data and file system user, the file of hibernation, the page file and the temporary files.

  Using volume of BONE (HDD) encryption an encryption key will be generated. This key will be written to the USB and then the USB is required!

  AFAIK the Bitlocker requires 2 partitions. A partition must be created as needs at least 50 MB primary partition. I recommend a? about 1.5 GB
  The second big partition Vista can be installed.

  After the installation of Vista the Bitlocker must be enabled in Group Policy (units without secure TPM). This can be done using the command 'gpedit '.
  And then under models of administration-> windows components-> Bitlocker bitlocker function can be activated!

  Anyway, there is much information Bitlocker and I think you should also consult the Microsoft Web site for more information:
  BitLocker Windows Drive Encryption step-by-step guide

  I hope I could help a little

• Several Questions about educational Versions of the software

  Well, I have several questions about teaching from Adobe software.  I will attend school in the near future (now I'm not enrolled in any type of school) and I see that Adobe has huge discounts on "educational software".

  What exactly is the difference between the "commercial" version of a program and an educational version?  Do you need some kind of student card to activate an educational version, or proof that you are in school, or something special like that?  I noticed people unopened sell educational versions on eBay and I heard there is no differences between the software, but this makes me wonder... why the price difference?

  Also, I intend on buying another Mac in the near future - probably for the school.  My second question is - with this software (education), is that I can put programs on my desktop and my laptop, or they won't work on one person on one computer?  I've heard people that serial numbers cannot be activated so many times.

  Last question.  My HDD recently crashed and I lost a good bit of things and had to re - install everything.  If this would never happen again, reinstall all Adobe programs on a hard drive nine?  Or I will meet the all 'serial numbers cannot be activated so many times?

  Very well.  I think about the fact.  Any input would be great.  Thank you.

  -Mike

  In terms of content, there normally is no real difference between the editions of the retail and educational/student. There may be some additional fonts or clip art in the commercial version, but this varies from one version to the other, and a product.

  You must qualify to buy an educational/student version. These qualifications are listed on the Adobe Web site. Normally, you must provide proof of reserve that sells licenses of software for you. You can not buy now for the reason that you will be a student in the future. You must have purchase student status.

  Unlike versions of retail, education/student Adobe versions software are not transferable. Sale of such software 'closed' on eBay must be regarded with suspicion. Adobe resellers do not offer software on eBay sales. The software is either stolen, used (but reconditioned), or pirated goods.

  Most of the Adobe software, including the Creative Suite software, can be activated at the same time on two computers owned and used by a single individual. second computer is usually a laptop, if first computer is a computer at home for students. For retail sales, usually first computer is a desktop computer and the second computer is a mobile computer or at home. Computers must not run the software at the same time. And No, two students may not share a single copy on two separate computers.

  The software can be turned on and off but after 20 or if these cycles, you will need to call Adobe and explain what is happening to get characters such cycles. If you are enabled on both systems and a hard drive or a computer turns off and you need to reinstall the software without having the possibility to disable the system blew, Adobe activation support group normally will be granted an additional activation, assuming that you do not have a record of abusing the privilege (as your hard drive breaks down once a month!).

  -Dov

• Question about a post on the forum, help

  http://supportforums.BlackBerry.com/T5/Java-development/XML-parsing-using-DOM/m-p/545678#M110568

  can someone please see post above.

  My question is this code point, the synchronized block startng.

  Which is the right place or it should be as below.

   Object obj = Application.getEventLock();
       for (int i=0;i
  Thanks in advance
  			 
  The synchronization is needed by updating the user interface.  You should like few other things as you can while holding this lock.  I think that the way you have it properly.
  That said, I would recommend that people do not use this approach.  In addition, it is an expensive way to add fields to the form.  By adding this, you cuase the screen available for each field that you add.  You do better something like this:
  VerticalFieldManager newVFM = new VerticalFieldManager();
  for (int i = 0; i)<>
  {
  
          
  Node value = list.item (i).
  getChildNodes () .item (0);
  _node = List.Item (i) .getNodeName ();
  element value = .getNodeValue ();
  METTREAJOURCHAMP (newVFM, _node, element);
  }
  {Synchronized (application.getEventLock ())}
  _SCREEN. Add (newVFM);
  }
  ..
  ' Public Sub METTREAJOURCHAMP (VerticalFieldManager newVFM, node of the chain, string element) {}
  String title = "SectionName".
  newVFM.add (new RichTextField("." + élément));
  {if (node. Equals (title))}
  newVFM.add (new SeparatorField());
  }
  Edit: Corrected according to the following post.  Thank you
  		   

• Question about high latency of the processor

  Hey there,

  Hoping that someone here is able to help me with a high level of CPU Ready I see in one of my groups.

  Our cluster specification:

  8 guests - ESXi 4.0

  Dual - core Xeon 6 per host

  72 GB memory per host

  DRS and HA on

  Resources to its customers:

  32 guests (4 per host) with 4 vCPU and 20 GB of memory (use ave is 15 to 17 GB)

  The guests are Win 2 k 3 servers. Most traffic is read traffic and traffic - based application and is busy. Load of the CPU on each host is about 40-50% to the total of peak, but guests are higher than I think we should for the time loan CPU. See the chart below. I was wondering how concerned I should be at the ready time CPU?

  

  My first thought is that if the server has 12 hearts and we have 4 guests each asks 4 vCPUs in time with an activity semi busy, then we'll always see higher than normal loan of CPU time. Mainly because there is always one of the guest who has be waiting for the moment on the processors. So assuming that it is correct, if I was to lower the number of CPU 3 on each client (or maybe even 2), I should actually see the loan CPU time go to zero without affecting the performance of comments? maybe even win a few performance?

  Just check my logic here. Making sure that I'm not crazy (which my wife would probably).  :-)

  Thanks in advance!

  -Adam

  The rule is that whatever it is ready by more than 10% * by vCPU * is bad, if with vCPU you will get higher numbers, so its nothing to worry too much.

  Jason Boche said it is much better that I did

  http://www.yellow-bricks.com/2010/01/05/ESXTOP-valuesthresholds/comment-page-1/#comment-5861

  are you really an application performance problems?

• A few questions about networks

  Hello

  I have a runing test win xp with 2 network cards host. First NIC is the internal network by using the class C IP. I need my vm use the second NETWORK card with a class B IP to access

  the Internet, but I don't want to set up the box of victory with this IP address for security reasons.

  Is this possible in VMWare? Something like direct access to the material? or not in the host IP configuration?

  Thank you.

  Just remove the protcol to the network card you want to access. on the host.

  Please reward points - we must know if we helped.

  Click here to solve the problem-[http://communities.vmware.com/docs/DOC-9390: d-9390]

  Click here for the manual http://www.vmware.com/pdf/vmserver2.pdf

• question about data transfer from the computer using LAN network Analyzer

  Hello. I had a problem.

  I download the driver of instruments and settings S measured by the Rohde & Schwarz site.

  When I started using the measure, the error in the parser to network RSZVB-14 shows that

  «Distance error:-222, "data out of reach,: FREQTAR1»»

  In labview, had not any waveform.

  Need your help.

  Zinou

  Hello

  If you use RSZVB-14, it has frequency range 10 MHz - 14 GHz. example was written for models that start by 300 kHz.

  Just change the Start frequency to 10 MHz

  See you soon,.

  Milo

• Qosmio G20: Question about networking & monitor in and Xbox

  Just bought a G20 last week and I'm in love. First laptop I've ever owned and its worth every penny.

  A few scarecrows.

  I never received an antenna adapter to connect my in arial, but I'm sure I sohuld of fact. In the quick start manual of what it listed everything that I should received in the pack, and who was listed. Was not enough one - if anyone knows a number to contact Toshiba and get one of these sent to me? Can't seem to find one anywhere.

  Second... I'm going to my brother's computer network. Novice course of network, it does not work that well. I'm not sure whether if we need a router? I just want to connect to his computer and use the internet through that. As you would with a network cable. So he bought himself a wireless network card... but we'll be buggered if we can get it too work. Any advice or a definitive guide... or do we this router after all?

  And thirdly, sorry for the long post, but I'm playing my Xbox by the G20, but I'm having no luck what so ever. I plugged the monitor using the three composite cards (white, yellow and red) but nothing that passes through. The only way I've seen a photo is when you set up a decoder and it happens in a small box when its analyses for channels... but I can't select to see and it seems s delay 1 second.

  Sorry for the post long-term... just try to make it all sorted.

  Thanks in advance for any help.

  Hello

  You are right that the Qosmio is a very nice unit.
  But I'm not sure about the antenna adapter. I found the information in the user manual that the antenna adapter is optional. In this case the adapter will not always come with the laptop, but you can ask that the Toshiba service partner.

  Well well, on the network connection: If you want to connect two computer, you need a crossover network cable if you don t use the router. In addition, two laptop computers must be in the same workgroup. In addition, you must manually set the IP address, the default gateway and the subnet mask in the internet protocol TCP/IP properties.

  On the Xbox:
  If you want to know more on the connection of MCE and Xbox, see this Microsoft Web site.
  http://www.Microsoft.com/windowsxp/mediacenter/Extender/mcefaq.mspx

  Check also questions other messages of the forum on the Xbox:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9575&MessageID=33794#33794

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9756&MessageID=34462#34462

  Good luck

• Question about consistent errors in the event viewer XP Home Edition

  I ran a program called VEW looking errors up to twenty in the XP Event Viewer.

  Here is the data for the analysis of files:

  V01c Vino event viewer run on Windows XP in English
  Report run at 28/01/2012 23:42:23

  Note: All dates below are in the format dd/mm/yyyy

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  "System" Log - error Type
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Journal: "System" Date/time: 01/28/2012 22:48:06
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 01/28/2012 22:47:40
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 01/28/2012 22:35:31
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-22:49:54
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 27/01/2012-22:37:21
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-14:32:57
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012 03:38:23
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 25/01/2012-13:53:36
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 25/01/2012-13:32:34
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 29 Source: W32Time
  The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.  No attempt to contact a source will be for 14 minutes. NtpClient has no source of accurate time.

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 17 Source: W32Time
  Time provider NtpClient: an error has occurred during the DNS lookup of the manually configured peer 'time.nist.gov, 0x1 '. NtpClient will try the DNS lookup in 15 minutes. The error was: a socket operation was attempted to an unreachable host. (0 x 80072751)

  Journal: "System" Date/time: 24/01/2012 23:18:36
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 02:15:46
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012-12:58:29 AM
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 00 h delighteth
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:32
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:19
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 23:02:41
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 18:28:49
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59

  Parameters of scanning has been:

  • System
  • Errors
  • 1-20 errors, valued at twenty.

  What are these errors and they are nothing to worry about?

  I have Nero 8 on this system and have an updated hosts file the running here: http://winhelp2002.mvps.org/hosts.htm

  Not sure, but I may have changed a network setting to activate the new hosts file work properly.

  Seen these errors for a while. system works well and smoothly.  No symptoms of malware or infection seen or found.  I would call these software errors as they seem does not affect the operation of the system.

  XP Home Edition SP3 P4 2.8 2 GB RAM

  Joe

  Oh yes :)

  I have never used the program VEW and don't think I will check it - I just look at the Event Viewer logs the old-fashioned way (manually) if I think that there is a problem, but that might just be the old me.

  It is true that XP Home doesn't have Group Policy Editor, but all policy settings are always available via the registry.

  Some malware will change your GP settings and cause problems.

  I have a little import registry will correct all the ones I know, so if someone has these symptoms, any flavor of XP, they are running, I'll just send the script because sometimes you will be not able to solve the problem, even if you have not the GP Editor.

  The registry always import work - and work well for XP Home or XP Pro.  If you have the symptoms and XP Home, what would you?   Start the import operation of the registry.

  If you're curious, off on my SkyDrive it is a spreadsheet Excel (Group Policy settings) who has all the parameters of GP and where they are in the registry.  I do not recommend start searching, but it is useful to know where things are if there is a problem.

  I would not allow the connection of a security XP stuff unless you think you're being attacked.  More and verbose logging slows things down.  My Event Viewer Security log is empty.

  Find the links to the Microsoft Support Engineer for the most part useless to actually solve a problem (because it help you with your problem), if someone has a question or point of Event Viewer, I usually just send them this:

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

• Question about network bridge

  Hello

  I'm on Windows 7 Edition Home Premium and I have 2 installed on my PC LAN cards, one is built in, the other has been added via PCI. I have my internet connection is the built in LAN port and I use a cross on the cable that is plugged into the PCI LAN port that plugs a laptop. I went into network connections and highlighted both and right-click on one of the bridged connections them and selected.

  The laptop I have is for work and has Cisco Anyconnect installed on it so that we can access VPN. I guess my main question is, how would that work regarding the VPN tunnel through my bridged connection and would be too, that somehow invade my privacy web surfing on my own PC where the network bridge is configured? The VPN tunnel is completely separated from my research on the internet on my PC or my company would be able to see what I do on my personal PC, because the VPN crosses the bridge network on the PC? I hope my question is clear enough here.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Questions about regular maintenance of the supply service

  Hi - today I received the notice on the subject of the thread - rss health acrobat upcome scheduled maintenance of the supply service.

  A few questions:

  (1) how many times must we expect it in regular maintenance that interrupts the service?

  (2) can ask us, the users, that scheduled maintenance will be moved to less awkward hours? 5 19:00 PST is listening for our company (we do therapy online course, and a lot of people looking our service once they get off work for the day).

  Thank you

  Chris

  Hi Chris,

  (1) majority of our maintenance - as this one night, what happens once a month, without interruption of service maintenance.  An existing session can get an auto-reconnect, but it should be transparent to the end user.  With the health page, our goal is to communicate more, but put you up a good point here, as the ad seems more worrisome than what I have described.  I'll take action to discuss with our operations team, so we are clearer about the experience expected in the future.

  Every now and then, we will need a maintenance resulting in downtime.  And when that happens, explicitly indicated us on the health page and are designed to achieve these during low traffic hours.

  (2) the current offer today Adobe is a service of several tenant, and unfortunately, it is impossible to find a time that works perfectly for all our customers.  At the end of the day, without interruption of service for all maintenance is our goal.  If you need something that is more suited to your needs, the good news is that we now have a partner who can offer the ACC as a single tenant with custom SLA.  If you are interested, please visit http://www.connectsolutions.com/products/lccs/.

  Thank you

  Fang

• Satellite C660-1F1 - Question about newer drivers and the speed of the memory

  Some of the drivers for this laptop are outdated compared to the most recent drivers on peripheral manufacters website. Is it safe to use these new drivers or is it recommended to stick with the old drivers that are on the Toshiba site?

  And second question: is it possible to make the fastest possible working memory supported? Don t BIOS options include options for the parameters of memory. Why the memory is running as low mhz in case of default? CPU - Z shows that the current frequency of dram is 532, 2 mhz. What is the maximum, it is at 667 mhz? Probably she can´t be 1 066 MHz as promised in the specs?

  Hi cryogenized,.

  > Some of the drivers for this laptop are outdated compared to the most recent drivers on peripheral manufacters website. Is it safe to use these new drivers or is it recommended to stick with the old drivers that are on the Toshiba site?
  Why you want to update your drivers? Do you expect a gain of performance with newer drivers?

  Way General, with official Toshiba drivers you are on the safe side because they are pre-tested. If you can make sure that they work properly and don t cause property damage. Install the other drivers happens on your own risk!

  > And second question: is it possible to make the fastest possible working memory supported? Don t BIOS options include options for the parameters of memory. Why the memory is running as low mhz in case of default? CPU - Z shows that the current frequency of dram is 532, 2 mhz. What is the maximum, it is at 667 mhz? Probably she can´t be 1 066 MHz as promised in the specs?
  The laptop is equipped with modules of DDR3 1066 MHz and the RAM speed is dependent on the FSB of the processor. If your CPU is throttling down, RAM modules will work also on low speed. On a high utilization of the processor (100%) the RAM modules must run with speed of 1066 MHz I think.

• Question about upgrading HDD on the Satellite M40X-184?

  Hello

  I would like to ask if there is an option to insert a new hard drive in my toshiba. As much as I know that there is no official support for this?

  There is an access to the place where the disc is placed on the side of the laptop. S
  o that my question is
  1. is it possible to put a new drive (faster and longer)
  2. is it possible without losing the warranty
  3. what discs do you offer me

  Thanks Szczepaan

  It seems that the device must be capable of supporting hard drives 2.5 "up to 120 GB. Additional cell phone supports DMA synchronous Ultra100.
  You can use hard disks with a rotation of 4200 / 5400 RPM

  CU

• Equium A100 PSAAQ: Question about new update of the package of added value

  Equium A100 (PSAAQ) has received value-added information package download from toshiba, downloaded successfully, 3 provided separate files, zip files don't know which use as for the two buttons six buttons or without button machines, the question is which buttons do they refer to? so I know which file is correct for my machine, help please.

  Hi Andrew

  You should check this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25055

  It s on the same theme