Question about setting up a VLAN

Similar Questions

• Question about setting user

  Hello
  I have a simple report where I have a user (item number) setting, if a user wishes, allows to get information about this number of points. If the user does not meet in this setting at the time of the report, must be given all the results of the query. I did the setting user DO NOT need when you set it in oracle applications, but I get no output if I don't know the parameter user.
  Thank you
  A/A

  A/A,
  Can send you the query used by your report? There are two ways I can think off of the top of my head for this problem. First of all, to DECODE the item_number so parameter if it is null, it uses the value of database for the item_number. Second, allows you to encode a trigger After-Parameter-shape (CSA) to test if item_number is null and is not null, add it to your report query using a lexical parameter and add "ITEM_NUMBER =: P_ITEM_NUMBER" to the query.

  Here is an example of option 1:

  SELECT *
    FROM products
   WHERE item_number = DECODE(:p_item_number,null,item_number,:p_item_number)
  

  Here is an example of the second option:

     SELECT *
       FROM products
     &WHERE  /* here's the Lexical Parameter */
  

  If no item_number is given, and WHERE there is NO, so it has no effect on the query. If an Item_Number is given, then your trigger CSA would look like this:

  BEGIN
     IF :p_item_number IS NOT NULL THEN
        :WHERE := 'WHERE ITEM_NUMBER = :p_item_number';
     END IF;
  END;
  

  The resulting query that running would look like this:

     SELECT *
       FROM products
      WHERE ITEM_NUMBER = :p_item_number
  

  I hope this helps.
  Craig...

  -If my response or response from another is useful answers your question, please check the response accordingly. Thank you!
  

• Question about setting up a Wi - Fi on my 1985-2001 Satellite connection

  I've had this laptop for a few years and never had a problem with my WiFi. I am not very computer, so when the computer is telling me things like that I have a bit of stuff I panic. How should I do?

  I have a Satellite phone with windows XP Home Edition 1985-2001.
  It s says: (Windows cannot configure this wireless connection).
  When I try to connect to the WiFi, it connects always to internet when I plug but not via WiFi. He also says: If you have enabled another program to manage this wireless connection, use that software.

  If you want windows to configure this service Configuration (WZC) to start the wireless zero configuration wireless. For more information on starting the automatic configuration service, see article 871122 in the Knowledge Base Microsoft on the microsoft.com Web site.

  So I did and that's what he said:
  Some computers and hardware manufacturers provide their own configuration software that replaces the service provided in Windows Wireless Auto Configuration. In this case, you must use the software that is provided by the manufacturer to set up your wireless network.

  So I have two questions, this computer has its own configuration software and two how to fix this problem?

  Could someone help me please?

  Hello

  > this computer has its own configuration software and two how can I solve this problem

  As far as I know that Toshiba laptops are delivered with various wireless network cards; for example with Intel or Atheros WLan card.

  First of all, you should check you seller of WLan cards. If you are using the Intel card, possibly the Intel ProSet WLan utility is installed and try to configure the WiFi connection.

  If you use the Atheros WLan card eventually the WLan Atheros Client Utility tries to set up and establish the connection.

  So, you can use either such 3rd utility or you will use the Windows own option to use the WiFi network.
  If you want to use clean Windows Wireless Auto Configuration, you can enable it in the network-> properties from the network connections wireless-> tab-> choose brand wireless networks the option called use Windows to configure my wireless network

  But if you want to use one of the 3rd party (Intel, Atheros) configuration utility, and then start just such program, and check the settings.

• Question about the implementation of VLAN automatic voice with Polycom phones on a SF 300 - 24 p

  Someone at - it Setup successfully a SF 300 - 24 p to automatically assign a VLAN voice for traffic from an IP of Polycom phone? We have activated with LLDP-MED policy assigned to the port, as well as the interface configured as a trunk with the PVID defined on the VLAN data and Auto VLAN enabled.

  Hello

  Thank you for using the Cisco support community. My name is Nico Muselle and I work for Cisco Small Business Support Center.

  In response to your question, the only additional thing required on your switch is the choice of one of the below configurations:

  1. Affect the phone VLAN statically to ports connection of phones.

     or

  2. Turn them on Vlan voice (and change CoS affecting 5), and add telephony YES Polycom phones (the first 3 bytes of the MAC). You may need to add a few different Yes. This way the switch detects the phone YES and add the switchport to the Vlan voice.

  LLDP-MED network strategy as you have defined it, on the other hand, will be used to assign the VLAN on the phone automatically if you do not have to configure it manually on all phones.

  In short, you can choose one of the methods above, in combination with the LLDP-MED policy so everythings should work just fine. If it is not, please let me know.

  Kind regards

  Nico glacier
  Cisco Small Business Support Center.

• Question about SET log_buffer and SCOPE = SPFILE

  Good evening
  
  I am teacher Oracle. In the book I use it says that I have to specify the SCOPE = SPFILE in order (because it is a static parameter):
  

  alter system set log_buffer = 6m scope=SPFILE;

  It is said that if I specify the scope as indicated, the command will succeed, but I still get the error:
  

  SQL> alter system set log_buffer = 6M scope=SPFILE;
  
  alter system set log_buffer = 6M scope=SPFILE
                   *
  ERROR at line 1:
  ORA-02095: specified initialization parameter cannot be modified
  
  
  SQL> show user
  USER is "SYS"
  SQL>

  I am logged in as "SYS as SYSDBA.
  
  My question is: why it is not working? (the book says it should).
  
  Thank you for your help,
  
  John.

  SQL> alter system set log_buffer=7249920 scope=spfile;
  
  System altered.
  

  It works for me.

• Question about setting up the integration of siebel beep

  Hello
  
  I am new to siebel environment, I installed siebel and try to configure the integration beep part
  
  Step 1:
  
  I stopped the services of siebel, and then I copied the siebel to siebel tools driectory srf file and then imported the pix files and compiled
  
  and then I try to configure the service to start, deleted files existing integration and wsdl file and then imported xmpl I compiled. Now my quesiton is before you start the siebel service, should I copy the srf file compiled the directory from the siebel server and start the server using this framework of strategic results? then configure the incoming service

  Yes, you must copy the compiled objects srf / folder on the Siebel server.

  Check the Doc ID 546999.1 on support.oracle.com to find more information about repositories and changes in the repository.

  It will be useful,

  Wilson

• question about setting up DAD

  Hi master,
  
  
  Please forgive me if I'm posting in the wrong forum.
  
  
  I am little confused on setting up DADDY (database access descriptor) in oracle 10.2. Business Edition
  
  in the past, we can configure DAD in 10g express edition with a few scripts, on sql prompt, it does not require any color server or an application developer to facilitate access to the browser.
  
  but I think that this isn't the case with oracle database 10g R2, enterprise edition, to add a few lines in the DAD.conf files, and we use developer to access applications via browser.
  
  can anyone suggest how to achieve without using application server on windows platform?
  
  What should I configure this?
  
  Thank you and best regards
  VD

  Here's a simple tutorial that I used, it works.

  http://www.Oracle-base.com/articles/10G/dbms_epg_10gR2.php

• Question about setting up Site Studio

  OK, so we'll use site studio to generate web pages for our project, but I think I hit a nasty wall that I'm a little lost with. Of what I've read, you can run "site studio.exe" (or something to that effect) out of the windows machine, what University Complutense of MADRID was installed. The problem is the AAU has been installed on a device of based nux and the only way I can access the server through windows is via SSH.  If I am on how to run the Studio Site is anyway around the fact that it's on nux. Or is my hypothesis on the Site Studio even right to start?

  SiteStudio is used to generate Web sites. It is a component that runs on any content server installation, regardless of the environment.

  The file "sitestudio.exe" thingy is an IDE editor that allows you to change the structure of the sitestudio site and other things. It is not required for anyone, except the developer. It's not not to be installed on the server. You can run it on any Windows machine, including your desktop computer, which can connect to the content server.

• Questions about setting should level parent and units

  Hello
  
  We have a requirement for a sales manager for forecasting sales at level zero, for example
  by the customer. And the regional manager to adjust the number at the territory level (parent).
  Any ideas on the best way to do it.
  
  For example:
  
  Sales Manager input data to the Customer1, 2, 3, etc.
  Regional director can adjust to Total_Territory, and then return the data to the bottom. Basically, crush
  What was projected by the Sales Manager.
  
  Total_Territory 9
  | _Territory_A 4
  | __Customer1 1
  | __Customer2 1
  | __Customer3 2
  | _Territory_B 5
  | __Customer4 3
  | __Customer5 2
  
  Can we use target version to apply it?
  If we use the target version, can the user planned to Total_Territory even if there is a
  data on the client (level 0)?
  
  Any other ideas on how we can implement this requirement?
  
  The second challenge is what is planned is not the amount, but unit.
  If the regional manager you want to increase the target from 9 to 10.
  where should we allocate the additional unit of 1 to? And we cannot have
  Decimal into a unit.
  
  Thank you
  
  Lian

  Hello
  Out of curiosity, this could be an insurance company?
  I would recommend separating the target and down at the top of the versions and show them the two side-by-side to the users. Let your manager territory defined targets on the target version, but don't let it substitute the numbers upward. You can view the gaps in a third column to alert the Director of sales and Territory Manager. Responsible for sales can be held accountable for the achievement of the objectives. In my view, precisely assign targets to individual customers requires a judgment call and sales only for this Manager. So, I recommend you to perform the calculation of the allowance to the version target.
  Regarding decimals, if you create a fictitious client under each territory and mark them with an attribute or UDA, you can place the rest of the distribution of your integer to this member. It helps the sales managers to understand that there is an additional objective for the territory which is not shared among customers yet. If the structure that I would recommend would look like this:
  Territory 1
  -Territory 1 client buffer<--Dummy>
  -Client 1
  -Client 2
  -etc.

  See you soon,.
  Alp

• Question about setting preferably distribute

  Hi scripters,.

  I have problem with the code below, I am assaigning the value of 41 points at the measurement of distributing area but the InDesign took an incorrect value as mentioned below.

  app.alignDistributePreferences.distributeAbsoluteMeasurement = "41";  the InDesign gained value as "116,22 pt" in the measurement object area to distribute.

  Using InDesign CS5/Windows/Javascript

  Please suggest any.

  Thank you and best regards,

  Karpanai

  Yes, because 41 mm is exactly 116,22 pt

  --

  tomaxxi

• Question about setting cached remote SharedObject

  If I have a remote SharedObject connected, and I read a property/slot (e.g. so.data ["myProp"]), these data would be read from a local (or RAM) cache or the SO would, in fact, a call to the FMS?
  
  I wonder if I can read SharedObject properties with impunity.

  He was reading the property of local data. When SO accessories change, FMS distributes update message to connected users and users maintain these data locally.

• Questions about nb200

  I recently bought a mini nb200 with windows 7 and I have a few questions about it. How can you set up your email, I was willing to put up with Outlook Express, but I don't know if I can. Also, is there a way to get a paper copy of the user manual?

  You can download and install a new e-mail program when you download Windows Live via Microsoft Update. You can select the components of Windows Live, you want to include by checking a box for each you want. I installed all the. Or you can use Outlook, if you have Microsoft Office and you want to install it.

• Satellite A350D - 20K - Question about upgrade second HDD + Temperature

  I have a question about my laptop. I have notticed it is a second location of HARD disk on the bottom.
  Is it possible to use this to increase my storage?
  And if yes, how do I do that? I don't see all the connectors.
  What type of HARD drive to use in case it is possible to use this slot machine?

  My second question is on my laptop to be very hot after a short period of use.
  I installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees.
  He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.

  This does not seem normal to me. I tried to clean the vents with compressed air, but it has not made a difference.
  I searched on the internet how to take the laptop part for proparly cleaned TI.
  But I can't so I'm looking that destroy it.

  This could be the cause and more importantly, how can I solve this problem?

  Tom

  The second HARD drive bay contains the HARD drive connectors?
  If Yes, then you can use a SATA 2.5 HARD.
  If there are no connectors, then you will not be able to use the second HARD drive

  > I have installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees. He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.

  CPU and GPU produce a lot of heat. The heat dissipation is always created then there s nothing unusual that the temperature rose to higher level.
  You can change the settings in Win 7 power management. You can set the CPU to lower performance and can increase the activity of fan, which will help lower the temperature.

• Questions about an average of response spectrum and frequency of feeding mode.

  Hello

  I have a few questions about an average of mode. When I generate a sinusoidal signal from one output to two input channels channel to see if my DAQ card works well and vector averaged in the power spectrum for DFT, the amplitudes was different from the previous one of the amplitude, which was supposed to be 1 v peak. They range from 0.5 v to 0.6 v peak. When the calculation of the average model is RMS, the amplitudes were close to 1. I wonder what are the fomulas of RMS and average vector. Does that mean that I could not accurate if I use an average of vector? In a time of frequency response, why I coherences of difference and the amplitudes using the vector and the mean quadratic value?

  Thank you

  Ningyu

  rico1985,

  The differences in modes of generation are as they sound: 1 sample output only a sample writing, N samples will be released however many samples configure you for each entry, and the continuous samples released samples continuously until a specified user action happens (you press the stop button or a logic that you created gets fulfulled). The range of Signal output allows you to set a ceiling high and low level of your output signal and it only affects the quality keeping in this beach. Timing to set a deadline for the time between the acquisition of the sample. If a new sample becomes unavailable before the timeout setting, you will get an error. This is useful for looking at a network, because if the network goes down and you stop getting data from a machine and then you would like to know about it. I point you to those videos that are short tutorials on how to make the most of these actions in SignalExpress.The SignalExpress 3.0 Help file is also your first point of contact for all your questions on getting started. These two resources should get you up and running in SignalExpress in no time. (either by the way all your questions answered using these resources) Bravo!

• Hello Mr President! I have a few questions about the Word report generation please.1.How can I add a border to a page in word? 2. How can I add gridlines to a table generated related word?. Can 3. how I add a border to a picture of the Word report?. Thank

  Hello!

  Sir, I have a few questions about generating word reports using (C language in labwindows) please.

  1. How can I add a border to a page in word?

  2. How do I add border lines and grid to a table generated in Word report (not "cvi control table"inserted from gui, I wonder about the table generated in Word report)?

  3. How can I fill a table cell of report word with the data type other than 'character '.

  And sir a question on the use of the timer in labwindows cvi please.

  Sir, I'm trying to set a time minimum interval timer to 1millisecond (0.001 s), that I have set, timer cares about the interval set by me he only meets the minimum default time interval which is, I think as 10milliseconds (I'm using windows xp service Pack 3 version 2002).

  Concerning

  Imran

  Pakistan

  Have you read this statement ? It explains how to set the registry value:

  If the REG_SZ useDefaultTimer does not already exist, you must create it under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\CVI Run-Time Engine\cvirte. "" This can be done navigate to the appropriate folder, and then click Edit "New" string value. Then, click on means the name of the new value created, select Rename, and then specify useDefaultTimer as the name. Finally, double click on the name and specify the value True or False.