Question about the compatibility of memory for Satellite A100-496

Similar Questions

• Compataility of type memory for Satellite A100-496

  Hello
  I have a Satellite A100-496, and it sets out
  Memory type: DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM

  Straight forward question - WILL DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM
  work in this machine

  Concerning

  I'm sure it will work, but I wonder why use RAM with different FSB. If possible, try to get the recommended and tested RAM module:
  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

  Good bye

• Question about the Installation of XP on Satellite A100-307

  Hello

  I have a Satellite A100-307 with problems to install Windows XP. Model PSAA9E-11F03XFR

  The recovery CD is lost and I installed the laptop with a normal CD of Windows XP (sp2).

  During the Installation of the monitor is black.

  The Installation is without possible recovery CD?

  I created an Nlite CD with XP, but the SATA controller not found or the breaking of the Installation.

  Help me, please.

  Vtobi

  Hello

  essentially it s possible to install an of a real CD of XP/Vista OS, I think that this is the reason why Toshiba provides drivers on their driver download site.

  How do you mean that the screen remains black? More precisely, the description would be better...
  Another question: what SATA controller did you slipstreamed on the XP CD? I hope that you´re to the topic the A100 has an older controller (should be an ICH7M).
  By the way: have you ever seen this Toshiba document? : http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm

  Welcome them

• Question about the extension of RAM for Satellite A50-522

  Hello

  I have a Satellite A50-522, with a Pentium M 715 @1. 5 Ghz processor and Intel 855GME chipset. To expand its RAM I referred to the Spain/Toshiba support website and I bought the PA3313U-2M1G (1 GB SDRAM 166 MHz DDR333/PC2700) via amazon.com. It turns out that this RAM is for "Alviso chipsets" - which are those relating to the Intel Centrino processors with 9xx series express chipset. I called Toshiba/USA and they recommend the PA3313U-1M1G or its equivalent Kingston KTT3311 / 1 G (since it is impossible to find in the Mexico), instead of the one I already bought. They all seem exactly the same thing in their description, except for the note "alviso chipset.

  My questions are:
  (a) is the chipset of this computer, considered "alviso" type? and
  (b) if not, should I keep the RAM I bought already (PA3313U-2M1G for alviso chipset)?, can I have performance or compatibility problems? What are the risks of the use of this "alviso RAM' in a 'no-alviso chipset? I deeply appreciate your input.

  Thank you!

  Hello

  The RAM modules for especially for chipsets alviso are not known to me, but the Satellite A50-522 certainly supports the memory PC2700 PA3313U-1M1G bar.
  I guess the PA3313U-1M1G and PA3313U-2M1G are the same modules from memory.

  PA3313U-1M1G and PA3313U-2M1G memory module are supported the same specifications of 1 GB - SO DIMM 200 pin - DDR - 333 MHz PC2700

  I think you can use both modules without any problem.

• Re: Question about the CD/DVD player for Portege M400

  I have a Portege M100 - and the CD-ROM drive does not work.

  Whenever I put a disc in I can just hear the motor turn the disc, but the computer is not picking up the drive. Device Manager picks up flawless.

  It doesn't seem to be any firmware for this sorting (or am I wrong).

  I've seen a DVD player for a M400 on ebay and I was wondering if that would take on my M100.

  Before buying it, I was wondering if anyone knew if it would be compatible. It seems to be OK size wise, but I was wondering if my Portege M100 XP would be able to use it.

  The description for the drive I want to put in the M100 is below:

  Thank you very much for your time. :)

  Description

  DVD +/-RW drive for laptop Toshiba Ultra Slim Bay Portege M400, S100 & Tecra S3

  Compatible models:
  Portege M400, Portege M405, Portege S100-S113, Portege S100-S1132, Portege S100-S213, Portege S105-S1133, Tecra S3,

  The Toshiba Ultra Slim SelectBay DVD SuperMulti Drive is a DVD burner that combines all the functions of a DVD player, DVD recorder, CD burner, and CD player in an ultra slim and ultra light. It gives instant access to CDs and DVDs and fits perfectly into your slot to drive Ultra Slim SelectBay of your Toshiba Portege M400, computer laptop M405, S100 or Tecra S3. It is the ultimate portable storage for mobile users.

  Drive ultra slim and ultra light, fits perfectly in your Ultra Slim SelectBay of your PC drive slot, no additional unit to take on the road
  Dresser based on multiple drive in a compact design: DVD-RAM, DVD + RW, DVD + R, DVD - RW, DVD-R, DVD-ROM, CD, CD/R and CD
  Productivity:
  Backup of important files
  Easy access to CD and DVD based media
  Use for multimedia presentations
  Adapts to your lifestyle:
  Watch your favorite DVD movies
  Play music and games
  Create your own DVDs or music playlist
  Create CDs or DVs with ease
  Transfer data seamlessly between two discs, improve your productivity
  Reduce the time spent to transport and save files
  Slide-in simple, plug-and-play operation
  Includes drag ' n Drop CD + DVD3/B CLiP, Win DVD Creater 2 and the DVD-RAM driver
  Compatible with computer laptop Toshiba Portege M400, M405, S100 and Tecra S3

  Specifications

  Speed (Max):
  Read: 24 x CD-ROM, DVD-ROM 8 x
  Write: CD - R 24 x, CD - RW 4 x, 10 x HS CD - RW, 10 x US CD - RW, 2 x DVD-R, 2 x DVD - RW, DVD + R 2.4 x 2.4 x DVD + RW, DVD-RAM 2 x
  Compatibility: CD-ROM (read), CD-R(read/write), DVD - ROM (read), CD-RW(read/re-write), DVD-R(read/write), DVD-RAM(read/re-write), DVD-RW(read/re-write), DVD + R(read/write), DVD + RW(read/re-write)
  Dimensions and weight: 5 "x 5.5" x 0.4 ". 3.9 oz

  Hello

  According to the paper manuals s user for Portege M100 two drivers of optical discs are compatible with your Portege M100L:
  TOSHIBA SD-C2612
  TEAC DW-224TH

  So if you want to have good player get one of them.

• Question about the Y510 AHCI drivers for install XP

  NiHao Lenovo Forum,

  I am a proud owner of your IdeaPad Y510. I just wanted to ask what the web page offers Lenovo the AHCI storage driver to activate the storage controller SATA on the motherboard for my laptop Lenovo IdeaPad Y510?

  I ask because Y510 as many users who install the XP will need to have these storage SATA controller drivers if they want to support higher speeds, hot plug and native command queuing (NCQ).

  I see that Lenovo provides the following AHCI drivers for ThinkPad found here:

  www-307.IBM.com/PC/support/site.WSS/MIGR-62909.html

  Also, it would be useful to let everyone know that Lenovo Y510 models come with what advice system that they have, with regard to the necessary SATA AHCI Controller driver for them.

  I see the ThinkPad models use Intel 82801GBM SATA AHCI Controller or Intel 82801HEM/HBM SATA AHCI Controller as indicated above from the URL.

  How can I check my Y510 to know what Intel SATA AHCI Controller is necessary here?

  Some clarification would be useful. Thanks in advance for any help and assistance here.

  Also another method here would not create an installation with the Intel Matrix Storage Manager drivers slipstreamed XP disc? And how does a person know which of the many Intel Matrix Storage Manager drivers should be slipstreamed to the pilot Y510 AHCI SATA Controller here?

  And how many different models of Lenovo Y510 uses different system boards? Think there are at least two, because some have been announced with a FSB 800 MHz right?

  Thanks for any help and support here in advance.

  Read the FAQ some might answer your questions.
  Also, I suggest that different motherboards are in different models, as I said there are even different colors - green and Brown motherboards there. Brown, I saw myself - those who are ASUS, green are unknown for me.
  Then, NCQ is not a feature of driver software. It is a material of HARD drive capacity to optimize movement traectory leaders to speed up the read/write process. So, no driver is required to activate. This work iven in the BACK.
  AHCI driver is inside driver chipset. Also, you can integrate it. Please, read the FAQ .
  HTH

• Questions about the compatibility of the RAM.

  guys good day. I intend to add 1 stick of 2 GB of ram to my existing one. I want to know if this new stick that I am ready to buy is compatible with the one I have?
  It comes to my existing RAM card:

  Size
  2048 MB
  Type
  DDR2-800 - single channel
  Frequency
  400 MHz (1:2)
  Timings
  6-6-6-18
  Slot #1 Module
  Kingston - 2048 MB (6400)

  This is the form of RAM, I am ready to buy:

  Dynet 2 GB DDR2 RAM 667 MHz desktop memory

  "my PC can run the gpu?

  The PC can operate at the card, but if you want to use the settings in the game, it does not fit your desires.

  -GT 630 Passmark score is 738, less the GTS250 (903), which is the recommended level

  for the highest setting.

  It is higher than the score of 185 for the GT 210, but well below the rank gaming card

  indicating the point.

  The GT640 (1288 score) is a notch below the level of participation - GTX 650 (score of 1837) game card.

  The GT640 is a little like I'd go in the 600 series.

  What happened to the R7 (score of 1400) 250?

  .

• A general question about the stylesheet XSL - FO for BI Publisher

  Hello
  Of BI Publisher MS Word Add-in, there is a menu item that allows users to export my. Model RTF as an XSL - FO stylesheet. This provide great flexibility to users so that they can implement the most comprehensive features/features, which are not covered by keys/menus of Word Add-in, on their report. Now my question, how can reuse us this XSL - FO file (.) XML) when we finished editing on this subject? I tried to use the web client BEEP to download as a template of report TONE repository file, but it doesn't seem to work. Could someone give me an idea of this? There must be a way to deploy the XSL - FO stylesheet for model data BEEP otherwise, the item of menu "export" in word add-in becomes meaningless.
  Thank you very much.

  Just download the files you said.

  and click the new button at the top, it will create a new model with the name "new model".
  You have to assign one of the template you downloaded for this report. in this, there is an option as 'TYPE '.

  http://download.Oracle.com/docs/CD/E10415_01/doc/bi.1013/e10416/pptoutput.htm

• Compatibility memory for Satellite A100

  Hello. I just buy a Toshiba Satellite A100-528, and I want to buy more memory, 512 mb DDR2 533.
  Where can I see what memory is compatible with my laptop? My option: Kingston, Kingmax!

  TKS a lot!

  e http://www.crucial.com/UK/Store/listparts.asp?MFR%2BProductline=Toshiba%2BSatellit & Lim = Toshiba & tabid = AM & model = 100 + series + Satellite & submit = Go

• A question about the size of Swap for Oracle 11.2

  Hello everyone
  
  I want to install Oracle Rac 11.2 on 2 Server with 22 GB of RAM each.
  
  Reading Exchange according to the requirements of the Infrastructure of grid for Linux, I found this:
  
  Between 1 and 2 GB-> 1.5 times the size of RAM
  Between 2 GB and 16 GB-> equal to the size of RAM
  More than 16 GB--> 16 GB
  
  The requirements of database for Linux 86_64 of reading:
  Between 4 and 8 GB-> 2 times the size of RAM
  Between 8 and 32 GB-> 1.5 times the size of RAM
  Over 32 GB--> 32 GB
  
  
  Then, with 22 GB, follow the requirements grid: 16 GB and database requirements: 33 GB
  
  Should what size I get?
  
  Thank you very much

  This is how I read it.

  Best regards

  mseberg

• View the size of memory for Equium A100-233

  Hi I have laptop very an Equium A100-233.
  In the specifications, it indicates that the built-in display memory can be up to 128 MB.
  The problem is that the driver has 64 MB max.
  As the memory is shared with the system memory, I guess I do need a MEMORY larger bar, so I put a 1 GB DIMM in there now, but it still says 64 MB max.
  So is there a setting I need to change to make 128 MB?

  I also think that you have the Satellite A100-233 and not a satellite.
  I put t found any unit Equium bearing that number.

  However, the specification says the laptop supports an Intel 950GM 8 MB to 128 MB shared memory.
  Upgrade memory max could be up to 4 GB. Then perhaps you need to install more memory to use the 128 MB

  But if it is not a special option for graphics memory changes so I assume that the driver will check the value of memory.

• Upgrade memory for Satellite A100 - 02 M

  My laptop has 1 GB of memory originally and I want to upgrade to 2 GB.

  I've identified the 2 x 1 GB memory PC2 DDR2 (667 MHz) modules that I need but am confused if I should choose module type PA3512U-1M1G or PA3512S-1M1G.

  Two of these pieces are available in parts of Toshiba, but Kingston lists only the correct PA3512U-1M1G for my laptop (A100 - 02 M).
  The two parts are compatible with the laptop and is one better than the other?

  The price of Toshiba of the 'U' part is rated £14.20 and the "S" £16.54 each party. "

  DRM for info.

  I imagine that Toshiba has more information on compatibility and specifications of the laptop you can use both of them. Now, it's your choice.

  Kingston is also good place to buy Rams. They always offer quality products.

• Question about the compatibility of the drivers Win XP for Satellite L40 - 12 K PSL4E

  When you try to change my laptop from Vista to XP I don't find the drivers.

  However I found the driver for the same model, but PSL48, 49, 4B and 4 c. Could someone confirm that these drivers also work with my laptop PSL4E? Thank you/rgds. Sonia

  In general, you can install these drivers, BUT you should also check the chip chart and other devices like for example the wireless network card.
  Many laptops are equipped with different graphic chip or other card WLan so in this case you should pay attention to these differences.

• Satellite 4090CDS: Question about the compatibility of the CD-ROM

  Hello

  I found a CD player in ebay, but I don't know if his
  compatible with my laptop (Satellite 4090CDS) or not. It is compatible with some of the similar latops as 4080XCDT and 4090XDVD.
  I asked the salesman, but he's not either.
  Here's the link to the article I think would compatible.original lecteur_CD is TEAC CD-224th

  name http://CGI.eBay.ie/ws/eBayISAPI.dll?ViewItem&Item=6842817153&Rd=1&sspage = STRK % 3AMEWA % 3AIT & rd = 1

  How can I make sure?

  Thank you very much
  Arash.

  Hello

  In my own opinion, so the reader is compatible with 4090XDVD it should be also compatible with the 4090CDS Satellite.
  But if you want to be sure if this unit is compatible and supported at 100%, then ask the certified partner Toshiba. I m it can give you a good answer

• Satellite A30-203: Question about the differences of memory modules

  Satellite A30-203
  512 Ram part no PA3312U - 1 M 51
  512 of Ram Part No. PA3312U - 2M 51, can someone tell me what is the difference between these two parts of RAM apart from the retail price.

  Hello

  The PA3312U - 1 M 51: 512 MB - SO DIMM 200 - pin - DDR 333 MHz / PC2700
  The PA3312U - 2M 51: 512 MB SO-DIMM 200 pin - DDR 333 MHz / PC2700
  http://UK.insight.com/apps/Productpresentation/index.php?product_id=TOEA048EF

  Sorry, but I don't see any differences.