Question about the issue at random pool

Similar Questions

• Question about the issue of the Double NAT...

  Hah I posted for a little.  I have a question about Double NAT.  Is it wise to launch?  Reason why is that I have a WRT54G v6 router and the Zoom ADSL X 4 Modem/Router/gateway and it seems that sites take just a little more time to respond to Web sites.  I just want to know I have to turn off (i.e., go in with my router bridge Mode) or what.  Or leave it alone.  Now one last thing: that the problem of slow could actually be AT & T but I have the feeling that this isn't.

  What configuration options you have on the Zyxel to fill? What have you tried exactly?

  The basis for the first option is:

  * Bridged Zyxel.

  * Linksys configured for PPPoE with your user name and password for the internet connection.

  Instructions to fill the Zyxel are here or here depending on the exact model of Zyxel.

  The second option is:

  * Zyxel doing business as the router. I assume here that the Zyxel is on 10.0.0.2 with a subnet mask 255.255.255.0.

  Unplug the Linksys to the Zyxel. Connect a computer to the Linksys. Open the web interface of the WRT to http://192.168.1.1/

  On the main Setup page:

  1. change the LAN IP of 192.168.1.1 address 10.0.0.1.

  2 disable the DHCP server.

  3. save the settings. You will lose the connection. Unplug the computer.

  4. wire one of the numbered LAN ports of the Linksys for the Zyxel. Do not use the internet port of Linksys!

  Now you should be able to open the Linksys web interface to http://10.0.0.1/ all devices connected wireless of Linksys or connected to one of the three LAN ports must have a connection to the internet via the Zyxel.

• Question about the new Yoga 10 HD +.

  Hello

  A few questions about the new Yoga 10 HD + that I hope you can answer.

  I bought the former model, last year. Love the design and long battery life, but a few major questions made me return.

  • Somewhere that I've read that it can not read NTFS on USB so I guess that's the same thing with a NTFS formatted microSD card?
  • Can it read exFAT formatted microSD cards?
  • Anyone who has questions about the audio via bluetooth?
    (I know that BT is not exactly High End HiFi but the old 10 Yoga for some obscure reason - most likely a driver problem which nobody cared to fix - rang * very * worst with visibly distortion while both my phone and a Tablet noname cheap I have zero about fidelity - any of my devices bluetooth audio) I tried aptX or not)

  So to avoid buying it back it also I really I would like to see if I can get my questions answered before buy you.

  While I love the form factor and long term issues above are only two Mayor dealbreakers for me. Bad audio quality = no joy listen to spotify, local etc. MP3s. not of NTFS or exFAT = some great movies.

  My old noname android Tablet really could use an upgrade so I'm really curious it may be, or I should watch the competition and will be form factor and battery LIFE.

  Thanks in advance.

  EDIT:

  If it does not support NTFS or exFAT on microSD card have someone at - he tried ext3 or ext4?

  I mean with Linux Android root, it should be a no-brainer to support at least when it comes to royalties unlike NTFS or exFAT where it * might * have some trouble with Microsoft.

  I used a USB through a USB OTG cable. NTFS or exFAT have been recognized by the Tablet PC. FAT32 is seems to be the preference.

• question about the Microsoft gift card account

  Original title - Microsoft Store

  I have a question about the Microsoft gift card account, if I use my ms points and it is not enough to cover the whole price and I used my paypal, why I am charged for all for a game and there is no deduction for my ms points. IM under the impression that the difference between the points and the game is the only accused to my paypal. But I was charged for everything.

  Hi Marlon Mesa,.

  Thanks for posting your question in the Microsoft Community.

  I'm sorry to know that you are facing this problem.

  You may need to contact the Store Support team for further assistance on this issue.

  Sales and support: http://www.microsoftstore.com/store/msin/en_GB/DisplayHelpContactUsPage/

  Keep us in the loop to help you further.

• Questions about the implementation of clusters of storage and DTS on active cluster

  I have a few questions about the implementation of clusters of data store and SRS storage in VSphere 5.1.

  We have a data center with about 15 HP blades and a few servers non-lame.  The hosts are all either VSphere 5.0 or 5.1.  Our back-end storage is an EMC VNX 5700 with about 20 stores of data.  All the VMWare is managed by VCenter 5.1 running on a dedicated physical machine.

  Currently, each data store is used individually; No piles of data store are put in place.  When a new virtual machine is created, the administrator usually chooses the data with the most space store.  Periodically, we will go back and manually storage vMotion machines to balance the load.

  Recently, we have expanded the VNX storage, so we now have LUNS in different pools, with different levels of performance.

  What I would do is set up for the data store clusters, so that us when a virtual machine is created, the administrator must not know what data store is in which pool.  Also take advantage of the DRS storage so that the burden of storage will be "refine" himself a little.

  I know the setting up of a cluster of storage in a 'clean' environment is quite simple, but my concern is creation/conversion data warehouses existing in active production in the cluster, while they are used.

  If I access the screen "data warehouses and store data from clusters ', right-click on the data center and create a cluster, and then move the various data stores in the new cluster, will there be an interruption in the production running systems?

  I also wonder about activation of storage i/o control.  It is not currently enabled on data warehouses.  I know it's useful for the StorageDRS, but will be allowing any negative impact on the system?  If I turn on the warehouses of data, is there anything else I should do or set in addition to all that allows him?

  Finally, we are in the process of Site Recovery Manager configuration.  SRS has an impact on the configuration of the data clusters and DTS store?

  Thanks in advance for your comments.

  Mike O.

  Gregg Robertson wrote:

  Hello

  Clusters of data and using DTS store doesn't impact RS even if you create a cluster of data store for storage of replicated data and another for everyone else, this way you machines virtual you want to replicate are not moved on warehouses of data that are not replicated , but will still have the ability to move if there is a conflict.

  Gregg

  With all due respect but SRM and DTS don't go together. SRM does not at all support the use of DTS. So if you are configuring SRM forget DTS for now.

  Reason for this is that SRM knows no DTS and VMs can be in flight when a failover should occur, and bad things can happen. Also, the protection breaks when a virtual computer is moved between data warehouses in a cluster data store.

  In short: don't go there.

• Exam question-value of the point and unanswered questions about the VCP4 exam?

  Hello

  I have a few questions about the scoring to secure Channel 4 review system:

  1. All the questions on the exam are weighted the same?

  2. Is there a penalty for unanswered questions?  In other words, is it better to not answer a question, if you are sure that you do not know the answer, or take a guess if it comes down to it?

  Thank you very much

  Bryan

  Not responding not to an element, it is the same thing that answer wrongly as far as scoring is concerned, so it makes sense to guess rather than leave the question unanswered.

  With respect to the weighting, all elements have the same weight in the VCP exam, but some items do not count against the overall score.  These "dosed" items continually change and are chosen at random.  We insert elements assayed to determine the validity of the element until it became a party has received from the real exam.  If however, you want to treat each item with an equal amount of importance.

  Hope this helps,

  Jon C. Hall

  Technical developer certification

  [email protected]

  2077 Loma Linda way n., Clearwater, FL 33763

  727-446-8430 Office

  727-460-8448 Mobile

  Fax 702-554-3727

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• Question about the recovery partition

  Hello.

  I have a question about the recovery of HARD drive partition.

  If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

  I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

  Thank you.

  Hey Buddy,

  To be honest I n don't know what you mean exactly with this option to erase.

  In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

  In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Re: Several questions about the recovery of the Satellite L750 features

  I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

  (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

  (2) will be the recovery CD is exactly the same as the recovery on the system partition?

  (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

  (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

  (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

  Hello

  I'll try to provide answers:
  1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
  2 - Yes.
  3 - Yes.
  4 - No. Don t be confused with this.
  5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

  In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

  If you have any other questions you are welcome.

• I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I go back in just the Quicken file and restore it until I downloaded the update do I have to restore the entire

  I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I come back in all the Quicken file and restore from time Machine before I downloaded the update to do, I need to restore the entire computer?

  Yes, you can just restore this file or application. Use Time Machine to back up or restore your Mac - Apple Support

• Just a quick question about the appearance of the cluster

  Hello, this is Matthew, just a quick question about the appearance of the cluster

  Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...

  What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".

  Is there a quicker way to deal with?

  THz so much!

  You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Is it a good place to ask questions about the slow s Tablet touchscreen response?

  Is it a good place to ask questions about the slow s Tablet touchscreen response?

  You experience slow response on normal s tablet, the first gen one or the Xperia s tablet, a new.

  If you experience a slow response, it may be because you use too many apps at the time and slowing down of your tablet. How long it lasts?