Question about to go to a State.

Similar Questions

• Question about the use of the States in the DataGrid element converter

  I have a DataGridColumn with an ItemRenderer that extends the component of the box. The default view is a text element. When the user clicks on the text component, I change the State to add a PopUpMenuButton child and make the invisible text component. It works very well. However, I want to only allow a PopUpMenuButton is visible in the DataGrid at a time (similar to the works of an itemEditor). I don't want to use an itemEditor, because I've met too many problems trying to get that to work in this instance.
  
  I implement IDropInListItemRenderer in my itemRenderer, to gain access to the listData property, who will give me the owner (DataGrid), but I don't know how to 'turn off' the State 'edition' in other itemRenderers in DataGrid.
  
  How can I accomplish this?
  
  Thank you.

  Here go us. I simply added a listener for the change of the listData.owner events - if it is triggered, I updated the currentState null. Works like a charm. Much easier that trying to access the itemRenderers in the column and reset all. Better performance too.

• Hello Mr President! I have a few questions about the Word report generation please.1.How can I add a border to a page in word? 2. How can I add gridlines to a table generated related word?. Can 3. how I add a border to a picture of the Word report?. Thank

  Hello!

  Sir, I have a few questions about generating word reports using (C language in labwindows) please.

  1. How can I add a border to a page in word?

  2. How do I add border lines and grid to a table generated in Word report (not "cvi control table"inserted from gui, I wonder about the table generated in Word report)?

  3. How can I fill a table cell of report word with the data type other than 'character '.

  And sir a question on the use of the timer in labwindows cvi please.

  Sir, I'm trying to set a time minimum interval timer to 1millisecond (0.001 s), that I have set, timer cares about the interval set by me he only meets the minimum default time interval which is, I think as 10milliseconds (I'm using windows xp service Pack 3 version 2002).

  Concerning

  Imran

  Pakistan

  Have you read this statement ? It explains how to set the registry value:

  If the REG_SZ useDefaultTimer does not already exist, you must create it under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\CVI Run-Time Engine\cvirte. "" This can be done navigate to the appropriate folder, and then click Edit "New" string value. Then, click on means the name of the new value created, select Rename, and then specify useDefaultTimer as the name. Finally, double click on the name and specify the value True or False.

• A Question about debugging...

  Hi all

  I have a question about debugging - specific probes. Is it possible to link and save the values on a wire (with a probe) which is a loop for the loop counter (or even a secondary value)?

  When I'm debugging code to a state machine that I often more easy to wire to the top of the State and the value, I am interested in a cluster, and then use 'generation antenna' and a registry change to add this element to each loop. I could also do this by indexing just out of the loop too.

  Once execution completes etc that I can look at the table (either using an indicator or a problem) to see what has happened to the value to each State/loop. And often, I know exactly where my code was wrong.

  My question is: is there a way to do this using regular probes without having to build an array? So, for example, I probe a digital wire and get a table of responses rather than just the last value on the wire?

  Thank you

  Dave

  I found this nugget that does exactly what I want - it's a custom probe developed by Darren.

  This post on the Exchange of ideas gives to think it should be at least provided with the package LV either integrated in the dev environment. Well worth voting for!

• Ask questions about the HP Pavilion 14-V041TX Bluetooth

  Hello, sry for asking questions about simple things.

  How to activate bluetooth for laptop HP Pavlion 14-V041TX?

  Or how to bluetooth to detect other bluetooth devices?

  coz already try to use my smartphone, but cannot detect any bluetooth device or laptop.

  for what I know, I already install the driver for bluetooth.

  Maybe there's another driver, that I'm missing?

  Thank you.

  SRY for my bad English.

  HI @Ton1_qrenz ,

  Welcome to the HP Forums!

  It's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  No worries about your English.  I believe that I understand your question, and if not, you can specify if you must post back.

  I understand that you are unable to detect Bluetooth devices.

  Here is a document to help you with this company. There are links that it contains other documents that can also be of assistance.

  Understand and troubleshoot Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

  If the problem persists, try the following steps.

  Step 1. Go to Device Manager
  Step 2. Right click on "Bluetooth device" you want
  Step 3. Select "update driver software... »
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)"
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  If you are unable to connect to a Bluetooth device, try the following:

  Step 1. Search for 'Change device' in the start menu in Windows 8.
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device app option
  Step 5. Click on save changes to save the settings that you select

  So, you can try this

  Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
  Step 2: Now find 'Bluetooth Support Service' and double click it
  Step 3: Now click on the Log on tab and type "Local Service" without the quotes
  Step 4. Click on "account".
  Step 5: Now remove any authorization of passwords the password field blank
  Step 6: Below the upper left title should be a hyperlink 'Start' click

  You can also view tab management power and unchecked the box "Allow the computer to turn off this device to save power."

  If it is still not resolved, I suggest contacting HP support for further assistance.

  Please contact our technical support at the 800-474-6836. If you are outside the United States / Canada region, please click the link below to get help from your region number. Phone goes everywhere in the world

  Good luck!

• Questions about reinstalling Windows XP after the end of Support

  Several members of the family of my friends that I sometimes provide technical assistance for are still under XP SP3 on their systems.  These systems are too outdated and underpowered to upgrade to a newer version of Windows, and it will probably be some time until they are able to upgrade to a more recent hardware capable of running most modern versions of Windows.

  If in the meantime, something happens to one of their computers requiring a reinstall of Windows after support for XP purposes, but before they can get a newer computer, I have a few questions about what will happen:

  1. Is there still a way to activate their existing copies of XP during installation process?
  2. While I understand that new patches, updates, patches & will be is no longer provided, existing patches will be available through the Microsoft Update service so that I would be able to get those computers to update state that they would be about to XP supported ends, or do I have to search elsewhere to try & find these updates?  (It would be nice if Microsoft put up a cumulative update that would be sort of a mega-patch for people in this situation to be able to get back to the most current state systems, but I would not be surprised if there wasn't such a thing).

  Anyone know the answers to these questions?

  Thank you

  You should be able to clean install and activate Windows XP.  You should be able to upgrade as well, even if the wise move would be to get the updates stored on portable media or integrated into a multimedia installation (or both) as soon as POSSIBLE if the plan is to continue using Windows XP for a while.

  My suggestion is to set up and to buy Windows 7 Professional renovated systems / lease from places like TigerDirect.com - as pricing is generally about the same as just a license for Windows 7 or a little professional, the hardware specifications of these machines are likely machines Windows XP current in use, using something like the PC Mover take care of Laplink and Microsoft to move files (or for the more than 25 USD the) applications that can be moved as well) to the new system of the former is possible, and Windows 7 will get updated until 2020.

  Recently research I've seen systems to Windows 7 Professional for as little as 150 USD with 4 GB of memory and dual core processors.  Not bad.

• question about stacked sequence

  Hello

  I have a question about stacked sequence.

  I have a stacked with 5 sequences sequence (0,..., 4). I would like to run these as this form

  0, 1, 2, 1, 3, 1, 4, 1 then again 0...

  I don't want to duplicate the section 1 because it contains many objects, variable... One possibility would be to out objects and then duplicate the sequence and use of shift registers, but I don't want to use because in 1, I have some graphs in real time to draw...

  Will there be another (easy) way to do this?

  Thanks for the ideas,

  Concerning

  Why use a stacked sequence?  What you want is a state machine something like this

• Question about cloud connectors

  We try to create a cloud to Eloqua connector. I read the CloudConnectorSampleGuide. I have a few questions about the expected data models and models of general implementation.

  Configuration of the connector of the cloud

  • The CC stores the identification information for each configured CC step Eloquya Eloqua?
    • What are the guidelines for the safe password storage? (I can't store the passwords as dirty one-way-hash that I need the password during execution.  The two-way hash gives an illusion of security but is not better than the plaintext).
  • When the CC is configured, where credentials should take place between the 1st and the 2nd screen? (i.e. as a hidden form field, session cookie cookie/etc.)
  • Eloqua warns the CC when a step is deleted?

  Cloud connector performance

  • What is the average number of steps configured Single that manages the CC?
  • Is it possible for a CC to have 1000 s and unique not configured to query?
  • What are the guidelines for scalability when the connector has to travel 1000 steps configured and survey? The CC requires a worker architecture to manage a large number of configured steps?
  • Are there best practices around the CC recovery hangs
    • For example: CC acquires the State waiting for members and moves to the current State. The CC blocks before the end of the stage. What is the approach suggested for

  recovery of the tasks in the current handling during recovery state? (assuming I have multiple instances of CC of the Eloqua poll). Is the connector of cloud supposed to maintain States of WIP to manage recovery correctly?

  Dmitry, once again, it is entirely to the developer.  When you add contacts to a stage, they will be processed in batches.  There is no limit to how much you add, and since they are left to step up to that dealt with by the connector, how long they sit depends on how long your connector takes to do its job.  Expectations, of course the faster you can deal with the best.

• Questions about support

  Dear community of cloud!

  I have a few questions about the service of adobe support.

  First of all, I would ask which includes the support service. I am also curious about the length of the reaction and the way they treat the problem can occur. Receive problem reports directly into the program I use, or do I have to write a separate message in a service address or Skype etc are decent ways to communicate with them?

  Thanks in advance for your answer!

  Service varies down the line insofar as this support is provided and when/how quickly it is provided.  Some people are very satisfied with the support that they get and others are not.  These user forums are one of the support options and usually you will get a response fairly quickly, and if you provide a detailed problem statement you can usually get a solution.  If a solution is to contact Adobe customer service, there is not much anyone can do here in the forums except to the provide information to contact. To contact Adobe Customer Support...

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Question about my script

  I have a question about my script and why Im not return desired output. Could someone please help me solve this and also let me know what I was doing wrong, why their working version vs my return empty result. Thanks in advance and have a nice day.

  Mike P.

  First of all, I ran this for a list of all virtual cards ovf all my virtual machines. It comes out OK but gave me too much, I was looking for something a little more specific.

  Get - VM | Get-NetworkAdapter | Select-Object Parent, name, NetworkName, ConnectionState

  the script above has given me all the names of VM, AdapterName, PortGroup name and the connection status of the adapter of the said

  I wanted to filter this down a little more. I was looking for netowrk adapters connected to a specific NetworkName with a ConnectionState connected object. Mainly because I have another script, I want to run after the fact that would make this particular NotConnected and NoStartConnected adapter.

  I thought I could do it with the following script. The script works fine without errors and filter unwanted information. However, my problem is that it does not return what it finds on the screen as the previous script. I'm missing a piece for this script that will give me the output of the screen for each card that meets the criteria. I tried out channelling to a .csv, of course, it was empty as well. I tried a failed in an echo statement after him as well.

  Get - VM | Get-NetworkAdapter | where {$_.NetworkName - eq "Network 1" - and $_.} ConnectioState - eq 'Connected'}

  Thanks again for your help!

  You can better use the operator contains this

  {$_.NetworkName -eq "Network 1" -and "Connected","NoGuestControl","StartConnected" -contains $_.ConnectionState}
  

  It checks if the value property is present in the array of values that you give on the left side

• Question about CPU Ready time %

  Hello Vmware experts.

  Small question about time loan cpu in esxtop. I have a couple of the virtual machine that has been entrusted to 4 vCPU. When you view their stats in esxtop they indicate the highest term of loan from CPU. I was wondering if this figure is the result of adding the ready time of each vCPU? For example, a 4 x vCPU VM with ready time of 10%, does it really mean 2.5% by vCPU? Should I be concerned about ready time of 10%? I read that the multiple assignment of vCPU can unnecessarily cause time CPU ready. How others decide on how many vCPU they must assign to VM here?

  OK, just realised that was more than just a small question... anyway, would be great if someone could make all this a bit clearer for me.

  Thank you

  BTW, my hosts CPU usage to sit at an average of 25%.

  In vSphere they eased the scheduling of multiple vCPU co even more so that only the vCPU who got ahead of the rest is stopped.  It is always advisable to start with a single vCPU and work your way up if necessary.

  In esxtop you can use the e command to extend the CPU statistics.  In several vCPU machines this will let you see the playing time of each CPU (which should add until you have seen earlier) and it will also allow you to see the % used for each processor.  This should allow you to see if the two vCPU are properly used in a box of vCPU multi.   I had also the CSTP % field shows which is the stop of co and will give you an indiciation of how often vCPU on the machine stopped to allow the other CPU to stand.

  Great pdf on the CPU scheduler in vSPhere can be found here http://www.vmware.com/files/pdf/perf-vsphere-cpu_scheduler.pdf

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• A few Questions about the advanced Actions window

  Hello

  I have a few questions about the progress of the Actions (using the version of track CP7)

  1. What is the function of the action to "continue?"   Out of the peak action and advance the playback cursor?

  2. What does mean this comment "Nested calls to action advanced is a nice improvement."? Is the advanced decision at the top of a page of action tabs?

  3. What is the function of the option "custom" in the IF statement - "preform action if - custom", it doesn't seem to do anything for me?

  4. where can I get information about the timeline / playhead interaction with advanced actions, i.e. where the playhead is going again at the beginning of the slide. slide custom question - display button, e.g. verification of responses, comments - when all the objects are at the beginning of the timeline. I'm looking more for the read head of infromation functionality rather than how to implement this type of question.

  Thank you

  Donal.

  Continue: If an advanced standard action is triggered by a button, this will not trigger the playback head. If you want out, you can use continues. Continue can also be a choice in a conditional action, when one orders branching has nothing to special, but in advance. Continuous is also the "dummy" statement/command (this is the official name of a line in the dialog box advanced actions) If a statement has become unusable due to some reasons, it will be replaced by continue

  There is no nested call stocks advanced possible right now, one of my many feature requests. It would be sort of a subroutine that you can use over and over again, instead of having to create each time when necessary.

  A decision is one of the conditions to be an advanced conditional action. They allow to create more complex actions, as a loop or arrays are not possible. All decisions are executed in sequence and always.

  Custom: is a combination of or but it is rather limited, because you cannot use parentheses.

  I guess you'd better visit my blog if you want to learn more about the advanced actions.

  http://blog.lilybiri.com/

  I also did several Webinars on stocks advanced, last this afternoon (on the sharing of the actions) for Adobe. They are all available on request.

  Lilybiri

• Questions about Failver customer and rapid failover

  have some questions about customer and quick Faiolver of Oracle Database HA failover. Before asking these questions, I want to explain my environment. Here are the details.
  
  
  
  -We have two physical locations called "ABC" and "PQR".
  -ABC is the main site.
  -PQR is the backup site.
  -In ABC, we have the database to Oracle RAC (11.2.0.2) with two nodes.
  -In the PQR, we have only one stand-alone server (11.2.0.2) database with ASM. This isn't a RAC.
  -Data Guard has been configured between ABC and PQR and it works as expected.
  -Please note that we have a license for Active Data Guard.
  -We have products of Oracle Identity Management to ABC and PQR and they will use the RAC database as a primary database that is in the CBA.
  -We have not yet set up a Data Guard Broker.
  
  We want to achieve under objectives:
  
  
  Objective 1:
  -------
  
  Whenever primary CARS down completely, standby database becomes a primary database AUTOMATICALLY and it should allow the read/write operation.
  I guess it's called 'Fast Failover'. Please let me know if I'm wrong.
  
  Issues related to the:
  
  -To do this, I need to set up Data Guard Broker so that this standy database becomes primary when CARS go down completely with a power outage, planned or not.
  -Let's say that CARS falls does completely, how long take Data Guard Broker do standby db as primary.
  -What the client application / which is already connected to the CARS.
  -Let's DB standby became as primary and after some time if RAC comes back, keep data automatically becomes the primary role of RAC?
  
  
  Objective 2:
  --------
  
  As I explained above, all products Oracle IDM and applications to speak to the RAC database, what do know only on the RAC database, which is the main. They are not aware of the pending database.
  
  -Whenever a client session is underway with the primary database of CARS if CARS completely falls down, we would like to wait until the client session should get transferred datbase standby without losing session information. However before that happens, standby database should become primary because the client session can perform write operations.
  
  -Whenever a client attempts to connect to the primary CARS and assumes that the cab is completely down, we would like to expect from any client connections should are transferred pending database.
  However before that happens, standby database should become primary because the client session can perform write operations.
  
  According to my knowledge, above scenarios are called "client failver." Please let me know if I'm wrong.
  
  
  
  Issues related to the:
  ----------
  
  1. Please throw some light to reach above features.
  2. According to my understanding, before customer failover happens, fast failover expected has already occurred and ensure should get the switch for the main role. I guess that all this happens thanks to timeout settings. What are those.
  
  
  Could you please help?
  
  Thank you

  I didn't say that clients cannot reconnect automatically when primary fails: I meant that client sessions can generally reconnect and also keep any session state.

  Yes, they can reconnect but only to keep the session state for a SELECT statement. It is also possible with Data Guard, not only in the CARS I wrote: here's a demo with 10 g
  http://uhesse.WordPress.com/2009/08/19/connect-time-failover-transparent-application-failover-for-Data-Guard/.
  What is not possible is to maintain a session state: (INSERT/UPDATE/DELETE) pending transactions must be cancelled.

  Edited by: P. Forstmann on Dec 8. 2011 20:30

• Question about DISCHARGE (expr, 1016) function

  Hello
  
  I have a question about the DUMP function, specifically the DUMP (expr, 1016). What character set is the function of report? The only logical answer seems to me the characters of data. The http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions055.htm#SQLRF00635 docs it says: "by default, the return value contains no character set information. To retrieve the name of character of expr, add 1000 to all the values of previous format. "For example, a return_fmt of 1008 returns the result in octal * and provides the character set name of expr.*.
  
  I ask this question because a client complains that there a database with database EE8MSWIN1250 (obtained from DATABASE_PROPERTIES) characters and when I asked him to run a SELECT that could empty the contents of a column, he gave me this result:
  

  select dump(some_col, 1016) from some_table;
  
  Typ=1 Len=8 CharacterSet=AL32UTF8: c5,bd,c5,a0,54,45,53,54

  Now I can't imagine how the data can be stored in the AL32UTF8 character set if the characters of the database are EE8MSWIN1250. This scenario is still possible? I tried in vain to reproduce on my test database.
  
  I don't know if the column is defined with the characters of database or the national database characterset, but even if it was a NVARCHAR2, the dump function could not return AL32UTF8 since he is not a national character set.
  
  If anyone has an explanation, I will be very grateful.
  
  Thanks in advance and best regards,
  Swear

  1. to help with the confusion about the DUMP function: index realizes that the DUMP function can be performed in the remote database. Oracle tries to push as many functions as possible and semantically correct on the remote site. Therefore, it sends the statement of simple table on the remote site after stripping the DB link. In this case, the DUMP function sees the character set of the remote database and creates the resulting string of information. This string of AL32UTF8 to EE8MSWIN1250, as described in the note, but as all the characters in the string of information are pure ASCII, some codes are actually changed.

  Things get more interesting if you start to combine the tables of local and remote databases. For example, the following query is will normally return the character of local database defined for the two columns:

  select dump(xx,1016),dump(yy,1016) from (select x.dummy xx, y.dummy yy from dual x, dual@dblink y);
  

  This is because the first dual@dblink is transported to the local site and the join is performed here with application of DUMP.

  The following query returns the set for two columns of characters in remote database:

  select dump(xx,1016),dump(yy,1016) from (select x.dummy xx, y.dummy yy from dual@dblink x, dual@dblink y);
  

  This is because all the tables are remote and the entire query is sent to the remote database and y.

  The following query returns the remote character set thus:

  select dump(xx,1016),dump(yy,1016) from (select /*+driving_site(y)*/ x.dummy xx, y.dummy yy from dual x, dual@dblink y);
  

  Here, the DRIVING_SITE hint asks the database to perform the join in the database of the table, for example dual@dblink.

  2. to answer your question:

  Your understanding of the way of conversion is generally correct, but conclusions are not quite correct. In the scenario [client EE8ISO8859P2, EE8MSWIN1250 local database, remote database AL32UTF8], Eastern and Central European characters will work correctly, but the other characters to the remote database will not be (for example, French, Greek, Chinese). It is, I think, quite clear and is usually not a major problem, as usually only compatible languages EE8 are interesting for an EE8ISO8859P2 customer. However, in the scenario [customer AL32UTF8, EE8MSWIN1250 local database, remote database AL32UTF8], the problem becomes more visible. Having a taking customer support Unicode, you can recover some data French or Greeks of the remote database but you will fail as all of these characters will be "killed" by the conversion of distance at the local level (link DB conversion).

  EE8ISO8859P2 is also for the same group of languages, such as EE8MSWIN1250, indeed, but it lacks some interesting characters. The most important of them is the symbol of the Euro. Others are "' quotes, long dashes, TM symbol, and a few other less frequently used punctuation. Therefore, always define a database as EE8MSWIN1250, even if you run some clients (Unix) with EE8ISO8859P2. Do not run Windows with EE8ISO8859P2 clients, except for purposes of loading/generation of special file.

  -Sergiusz

• Question about the Oracle database resource management

  Good evening
  I have a question about Oracle database Resource Management (DRM) for Oracle Database 10 g. I had an incident which, in a development/UAT environment (different instances, same box, don't ask), a developer wrote a wrong SQL statement that consumed 99% of the CPU. Currently, there is no limit of resources on two cases of db, and the developers don't want limits. However, my manager wants a method to prevent something like this does not happen. If I use the Oracle database resources management, create a consumer group (called "DevEnv") at 40% CPU usage, what will happen if a user of DevEnv runs a bad SQL statement that normally consumes 90% CPU again? Anyone would take a different approach? Thank you.
  
  Sincerely,
  Sho Fukamachi

  782718 wrote:
  If users in the case of "db_uat" use 60% CPU would be users who belongs to DevEnv pending 'db_test' cannot be used more than 40% CPU, so their queries become slower at their end? I would like to know if this behavior works the same in an environment of multiple instances. Thank you.

  Yes, because the available processor would be 40%, they use more, while.