Ink cartiridge 57?

I have a HP officejet 5610 for several years and it works well. I want to buy the new ink cartiridge but this time I saw a 56 and 57 cartiridge comboset. 57 it fits to my printer? Of the instrution book only 56 and 58 were listed. 57 are usable in my printer?

Advertisement

Hi Pearhorse,

I just checked HP sure supply, and cartridges 56 and 58 are supported for your HP Officejet 5610 printer.  HP 57 will not work with this printer.

Secure supply of HP: https://h22203.www2.hp.com/suresupply/?searchTerm=HP%20Officejet%205610

Tags: HP Printers

Similar Questions

  • All-in-one 8500 - A909 replace ink cartiridge

    I get a message that says that the cartiridge of ink must be replaced even after replacing with a new one.

     
  • Remanufactured ink Cartiridges

    I use a new printer HP ENVY 7645. I do a lot of printing, and the black cartridge that is more important that I use for a few months. I have used remanufactured cartridges and my own ink for all my printers until then. Now, all of a sudden, HP tells me that an original cartridge must be used as evidenced by the fact that the remanufactured cartridges will not work. I clean the cartridges. HP has to realize that the cost of a cartridge is $ 35.00 at Walmart and the purchase of 3 cartridges is equivalent to buyiing a new printer. I've also seen printers for less than $50.00. HP must unlock codes to the printer so that the remanufactured cartridges can be used. In my case, if it doesn't happen soon, I'm going to buy another printer and it will not be a HP.

    If the printer is going through the motions of printing and has no error message then the printer is doing his job and trying to print.  If there is no ink on the page it is probably a problem with the cartrdige - maybe a printhead clogged because of incompatible ink or air bubbles in the drain pipe or some other problem.  Try the following:

    • Print a print quality diagnostics page.

      1. Load size A4 or US Letter, unused, plain, white paper into the input tray.
  • Why my printer HP Officejet 6600 uses color ink even if I'm not printing in color?

    I've had this printer about a year now. I replaced the full range of ink at least 3 times now, working on 4. I don't post much at all. A couple of leaves a day or two. I always thought she was using color ink very quickly so I thought I'd put it to the test. I changed the default settings in black ink only. I have replaced all the ink cartiridges, color and black. I decided this time I would not print anything in color just to see what happened. Well, the same thing is happening as if I were with color ink. The color ink is empty much faster than black ink. This seems weird to me. Now, we are at the point where it will not be printed unless I have replace the magentia. It seems unfair that they do not mention this clearly when you buy the item. Something like "Oh, by the way, we are not making enough money doing business as it should, then we will make replace you your ink supply, even if it is really not necessary and must take over." I paid for a new printer already with ink costs. Is there a way around this problem or am I stuck with it. Thank you.

    When you set the printer to print grayscale has also selected "black ink"? only

    HP and other printer manufacturers have technology another printer for different needs.

    • Some have integrated into the ink cartridges print heads.  These printers can print generally with one or more of the colors completely empty, or even with color or black cartridges (but not both) removed. The Deskjet 6980 series is an example.
    • Other printers have separate replaceable printheads and inks.  An example would be the printer Officejet 8600.  In these printers print head can be replaced if they are damaged by running the printhead with colors off.  Some of these printers allow printing with a color, the other will not.  If the printer is run without ink in one or several colours, the printer may be damaged, but the user may be able to recover without having to send to the printer for the service.
    • Other printers have permanent print heads.  To run only those without little ink in all colours would risk causing damage to the printhead due to clogs, air ingested in the grilled printheadvor printhead resistances of shooting. The Photosmart 6600 series is an example of this type of printer. For printers with fixed print heads that could require the service to get the printer to print properly again when the ink is finally replaced.

    The document described here how the ink is used.  The document is written for inkjet printers HP the same principles apply to printers inkjet from other manufacturers.

  • Empty ink does not print

    I have a HP Officejet 4620e, my printer suddenly stopped printing black ink.  I tried all the solutions I found online to no availl.  The printer is out of warranty.  Ink cartiridges are all genuine HP cartridges, black ink is the new cartridge and tried to clean the printheads several times to nothing does not.  What to do next?

    Hi Ed, you have a 4620 and you are based in the United States, I would advise to call HP telephone Support, regardless of who you are out of warranty, you will probably need a replacement. Can you please let me know how you go?

    Thank you

    Ciara

    Phone numbers

    http:// Welcome.HP.com/country/US/en/wwcontact_us.html

    Updated FW for 4620

    http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/getting-the-latest-firmware-amp-product-updates/m-p/3326035

  • My c7280 all-in-one tells me to "open the door, clear cartridge Jam".

    -J' tried the doors and came out all ink cartiridges... which door? and what I am doing wrong?

    Since the error message you received, I see you have a transport problem Jam.  Have you looked inside the printer, to the right of the cart that contains the ink cartridges, to check that it is not a small amount of paper in the printer?

    Thus, there are additional steps to troubleshoot a carriage jam, found here, in the document provided by HP.  I hope this helps.

  • Photosmart Pro B8850 questions - Windows 7 Home Premium 64-bit

    Photosmart Pro B8850 - worked fine with Vista 64-bit!

    With Windows 7 Home Premium 64-Bit, prints get hung in the print queue.  Diagnosis HP suggests bad USB connection or level ink cartiridges low - neither of which are correct or appropriate.

    The 'later' drivers are installed - BUT given their dates seem to be several years old?

    Best of cases, I can get that one image printed before my $500 printer hangs up.  In the end, I am unable to print anything

    H E L P

    Uninstall / reinstall seems to have solved my problem!

    T H A N K S

  • Photosmart 7520e: black ink cartridge doesn't work on Photosmart 7520e

    Black ink cartridge stopped working.  I replaced the cartridge with a new cartridge, HP 564 XL.  Used printer clean print head and Align tools.  Received message 'alignment failed.  Cartiridges are defined for quality parameters' the printer is off guaranteed so no help from HP.  Does anyone have any suggestions as to what to do?

    Hi @aquaharry,

    Welcome to the Forums of HP Support! I see that you have recently changed the black cartridge on your HP Photosmart 7520 and now you cannot print. You get a "alignment failed.  Cartridges are defined for quality parameters "."

    I wish you continue troubleshooting here: color or black ink not print

    Complete all of THE steps and make sure that the cartridges are properly ventilated.

    What are the results, you are FTA now to complete a successful harmonization?

    This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can easily say 'Thank you' by pressing the "Thumbs up" icon.

  • Ink cartridge is not compatible... Help!

    I bought a hp printer photosmart e-all-in-one c310 this a few days ago... I did everything as the screen told me... and the printer could not recognize the blue ink cartridge - ink cartridge is not compatible... my ink cartridges were original one... and I tried another cartiridge blue ink (564) that I bought online... still had the same problem... Please help... Thank you!!!

    Hello

    My suggestion: bring back to the store and get another printer.

    Kind regards.

  • I've updated to 10.0.1 IOS and the new messaging feature will not work on my phone.  Help, I really want to use invisible ink...

    I've updated to IOS10.0.1, and the new features of meassaging do not work. Help because I really want to use invisible ink!

    You're now sending the arrow and selecting invisible ink?

  • I opened ink invisible messeges

    When I receive messages in invisible ink, they come already open with just the text under it saying that it has been sent to invisible ink.

    Try to look at this blog! I had the same problem. I just had to turn my on and outside iMessage. http://ios.wonderhowto.com/how-to/message-effects-not-working-ios-10-heres-enabl e-them-0173872 /

  • Why can I not use the features of text as invisible ink

    I have an iPhone 6s and cannot use the features of text as invisible ink or send messages with Fireworks and things.

    Those are features of iOS 10 be released 13. You can then update and get these feature.

    http://www.Apple.com/IOS/IOS-10/

    If you decide to update on the release date, the Apple servers could be very busy, so be very patient if you can not update immediately.

  • Why is there ink (handwriting recognition) for OSX, but not for the iPad?

    I don't understand why Apple has not integrated for tablets handwriting recognition.  (After all, a Tablet is something of a slate...)

    The ink is not an Apple product.

    OS x and iOS are also 2 different operating systems.

    Write to the developer of the application to this topic.

    There are apps that can:

    1 example:

    https://iTunes.Apple.com/au/app/myscript-memo/id446368116?Mt=8

    Do a search on the iTunes App Store for other applications.

  • Since Vista upgrade of fonts on the pages Web resembles a printer on insufficient ink. Note, this is not a printer problem, but a problem of display. How can I fix this?

    I've recently updated WIndows Vista with Microsoft updates. After the reboot, the fonts on most of the pages in Firefox and my word processing program, (StarOffice not MS Word), light, incomplete, appearance part of the letter low while the rest is dark. Looks like, what I can only describe as, a printer on insufficient ink. I tried to increase the font size, reboot again.

    I suspect the problem with Windows and not Firefox but I'm lost as to how to correct the problem, so any help will be greatly appreciated.

    You can check your ClearType or other parameters of smoothing of police. I think that this page requires IE: http://www.microsoft.com/typography/cleartype/tuner/tune.aspx

  • I have Windows 7 and I was wondering if there was a version of Firefox called "Nightly"? The type of a Nightly.Ink file. In addition, every time I open 'Nightly' now I have g

    I have Windows 7 and I was wondering if there was a version of Firefox called "Nightly"? The type of a Nightly.Ink file. Also, whenever I open 'Nightly' now, I get a popup of the program update and it says "update.exe". Is this a part of Firefox "Nightly" or is this a virus? Please answer this so I can relax. My email is [email protected]

    Every night (a1) and (a2) Aurora built updated every day, so if you use such a developer version you will see an update every day (sometimes more than once a day in the case of a respin). These alpha versions are more intended to be experienced testers, because you may experience stability and regression of the questions at any time. The beta version (currently Firefox 25) can be useful for testing Web sites to see if they're going to get broken in the next Firefox release and file a bug report, if necessary.

    Note that you must always install such version of development alongside a stable version and use a separate profile for each version folder.

Maybe you are looking for

  • How to get back to my default went recently to the sites when I click on the new tab?

    You see, I downloaded kind of something which changed the squares which showed what I... went in front. (Sometimes just recently, but it registers itself it.) I don't mind.) Now it shows Yahoo. And I don't want Yahoo NOT showing when I click New tab.

  • Portege M800-A312 can't play using the full screen

    I just bought the A312 M800 and found that I can not play games using the full screen. I already tried pressing Alt + Enter during the game, put "full screen" in the option game, change the display resolution same as game (800 x 600) resolution, set

  • Satellite L300D-243 - no audio output device is installed

    Hello I look for a similar problem in the forum but have not found anything that's been resolved.I'll try to explain how my problem came. My sound is fine until when a few days ago I tried to lower the volume and then all of a sudden it froze.Came a

  • Windows Live Photo issue Gallery

    Hello I try to see the photos using the default Windows Live Photo Gallery and keep receiving this message: "Windows Live Photo Gallery encountered an error loading WLXPhotoViewer.dll and cannot start.  "Error code: 0x800726b1. Strange; I used it ear

  • HP C7280 solutions Center will not work after the upgrade to Windows 7

    I was running Vista and connected the C7280 wired and wireless. The last month or so has been wireless without any problem. I've upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says: "an unsupported