Question about traffic converter

Similar Questions

• Question about VMware Converter traffic

  Hi all

  Hoping someone can shed some light on this. I do a P2V on a physical server in site A and destination ESXi host is also at the site. However, the field 'destination' in the VMware converter must be the vCenter server which is on the Site B (via a 6 MB WAN connection) as the destination host is managed by a vCenter server. My question is if I use the server vCenter (located on a WAN connection) as a destination and then choose the host located on the local site in the converter, converter traffic flow over the WAN? Or is it just flow locally from the Source to the Destination and just use the vCenter server as a server of type "authentication" for the initial Setup?

  And as a side note, if I set the destination host ESXi as a destination in the converter instead of the vCenter server, I get the error indicated in this KB. http://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2012310

  With the help of converter 5.5.1

  Thanks for your help!

  Hello

  Traffic passes from the source computer to the destination ESX. You will have a small slowdown in the wizard before you start converting mainly to get the VC inventory. See the graphics in the user pp. 11-13 guide

  Concerning

  P.S. If you want to V2V, keep the server converter on site A, too as in this case, that the data passes through it.

• Question about traffic on VSwitches

  Hello

  I'm trying to understand how the flow of traffic between vswitches.

  I have 2 computers, virtual, VM1 and VM2. Both a vswitch on the network of the Virtual Machine VLAN100 and VLAN200 on the ISCSi network where they reside. VM1 and VM2 resides on different LUNs on the same Bay drive. I use VSphere5 with 5.1 ESXi hosts.

  What traffic passes between the network of VLAN100 and VLAN200 if:

  1. I copy a file of 10 GB between VM1 and VM2
  2. I import a SQL database on drive D: of VM1 in SQL on VM1 instance.

  
  Thanks for your help.
  Robert

  I'm not sure if VLAN200 is in this case connected to the ESXi host or as a guest for the VM iSCSI directly. Anyway, as you copy data from one virtual computer (in case 1), traffic between virtual machines will use VLAN100 and traffic to read/write data from/to the iSCSI storage will be on VLAN200. In the second case, the virtual machine will be re-read the data VLAN200 and also to write data to the VLAN200 (i.e. from/to the iSCSI storage).

  André

• Question about traffic portgroup and vswitch

  It is my understanding that the network traffic between virtual machines on the various exchanges on the same vSwitch will stay within the vmkernel and not go on the wire to the physical switch. This makes sense because it is the most effective way.

  Is there a way to force traffic between exchanges on the same vSwitch back on the bear to the physical switch?

  If you wonder why, we try to avoid having to use the method of marking of external switch (EAST) to deal with the VLAN and ESX.

  Using the virtual switch, but will achieve what you want, give the PGs a VLAN tag and the external switch in trunk mode configuration. There is a good PDF VMware explaining how to configure.

• Various Questions about wireless access controller

  Help me please with these fundamental questions about the role of the access (AC) wireless controller.

  Assume that the access controller and Access Point are connected via IP:

  -Wireless frames sent to AP to acre; include the original MAC header (on the way to wireless access)?  If Yes, is there a Cisco AC gets to fill the WLAN and LAN it is plugged (which means that it outputs as ethernet frames as if they were issued by Mobile Stations).

  -Is the AC necessarily the default gateway for mobile stations? I guess not. But it is possible the default gateway?

  The Cisco AC can function as a DHCP relay?

  The AP creates a tunnel to the controller. All IP traffic from the AP to the controller will address the AP source and dest IP to the interface of the Manager of the AP on the controller. The wireless client traffic is encapsulated inside this tunnel. When it hits the controller the CAPWAP is removed leaving the customer's original package to be sent to the local network through the controller.

  The controller should not be the default gateway for wireless clients because it is not a router. Think of it as a device that converted into wired wireless traffic.

  Normally, the controller acts as a proxy DHCP. Once the customer has joined a WLAN, the controller sends the DHCP packets to the DHCP server on behalf of clients such as the IP address of assistance normally configured on the router for cable customers. You can also configure the controller to act as a DHCP server for wireless clients.

• A few Questions about the videos on my Sansa Fuze

  Hey all,.

  I'm pretty new with my sansa fuze (I only had for about a week), and I have 2 questions about 'videos' on the "rocket"...

  Any help in answering these questions would be greatly appreciated!

  So:

  First of all, on my sansa fuze, I see 2 folders under the section "VIDÉO", "Audio_TS" and "Video_TS". What are these folders and files ranging in what folder?

  Second, I tried to load this video (about 20 min. length) through the Sansa Media Converter on my sansa fuze. Now, when I try to convert my video to a Vob (a kind of file extension), the appropriate file type file (which I suppose is all .mp4), I get a message saying: "It cannot convert, because your Sansa player is not connected" (even though I know I plugged). Is there a way I can get the Sansa converter program around and just use a different software to modify the mjy .mp4 file, or what I need to use the Sansa Media Converter to do?

  Again, any help is appreciated...

  Thank you

  Rocket-4-Life says:

  Hey all,.

  I'm pretty new with my sansa fuze (I only had for about a week), and I have 2 questions about 'videos' on the "rocket"...

  Any help in answering these questions would be greatly appreciated!

  So:

  First of all, on my sansa fuze, I see 2 folders under the section "VIDÉO", "Audio_TS" and "Video_TS". What are these folders and files ranging in what folder?

  Second, I tried to load this video (about 20 min. length) through the Sansa Media Converter on my sansa fuze. Now, when I try to convert my video to a Vob (a kind of file extension), the appropriate file type file (which I suppose is all .mp4), I get a message saying: "It cannot convert, because your Sansa player is not connected" (even though I know I plugged). Is there a way I can get the Sansa converter program around and just use a different software to modify the mjy .mp4 file, or what I need to use the Sansa Media Converter to do?

  Again, any help is appreciated...

  Thank you

  OK two records don't matter to you. SMC (or any other program) place the files in there, so you don't need to worry. VOB files are not compatible with SMC, so when you rip the DVD, you must use a program like Any-Video-Converter to create an AVI file or a mpge (my recommendations). Rhapsody will also add videos to the "rocket" as well.

• A few questions about installing Windows on a Mac

  Hello world.

  I'm considering installing Windows on my 2006 iMac. I have a few questions I was hoping you might be able to help me with that. I know that this machine will run Windows 7 or 8, in terms of system resources, but probably doesn't have the RAM for 10.

  The girl has reached Apple Obsolescence and no longer can be upgraded to newer versions of Mac OS. Unfortunately, this also means that she can not get the latest version of iTunes and don't talk to my phone. But she still my entire library of music.

  I know that used at least iTunes is available on Windows, but I seem to remember that they took it. Y at - it an option to put my iTunes music on an iPhone 6 in a Windows environment? I don't mind if I need to convert files or otherwise work for her. I have just a few old out-of-print stuff that I really miss being able to listen to anywhere other than my office.

  I'm pretty much stuck with versions before 10, due to the RAM thing. Honestly, I haven't used Windows since around 1998, with the exception of a terminal XP at work, so I don't know much about it. Any recommendation on which version is the best? And I can buy a copy online directly from Microsoft?

  If I would be better off buying a new laptop for very cheap, it is also a possibility. But my Mac still works well, despite not being not supported for updates, and I hate wasting perfectly good material. I just don't have the money for another Mac right now.

  Hello

  Any questions on iTunes, the best place to ask the community Apple iTunes is their program, not Microsoft.

  @@@@@@@@@@@@@@@@@@

  Microsoft sells more XP, Vista, 7, or 8/8.1.

  End of sale: http://windows.microsoft.com/en-au/windows/lifecycle#section_2

  Try Amazon.com, etc.

  See if this helps you:

  "Install Windows 8.1 on a Mac".

  http://Windows.Microsoft.com/en-us/Windows-8/install-Windows-on-Mac

  And take a look at this article:

  "By using Boot Camp to install Windows and tools from dev on your Mac"

  https://msdn.Microsoft.com/en-us/library/Windows/apps/jj945423.aspx?f=255&MSPPError=-2147217396

  "Boot Camp 5.1: frequently asked questions about the installation of Windows 8.

  5.1 Boot Camp supports operating systems Windows 8.0 and 8.1 of Windows on Mac with Intel processor.

  https://support.Apple.com/en-us/HT201457

  See you soon.

• Questions about LR CC conversion

  I am a user of LR5/CS6 and planned to convert it into CC because it came out.  I have questions about the conversion process.  More precisely:

  1. I use a single catalog LR5.  Can I continue to use this same catalog LR CC or I have to create and populate a new catalog?

  2 will be my LR5 brushes, presets, calibrations etc camera automatically fill in LR CC or they will have to be reloaded?

  3 will be my actions CS6, adjustment presets, application frameworks, etc. automatically fill in PS CC or these will reloaded?

  I guess, overall, my question is: how transparent is the move to the CC?  Thanks in advance for any guidance you can provide including the pitfalls you've encountered.

  Richard

  Once you switch to LR CC or LR 6, you will have two files different catalogue (the catalogue LR 5 and LR 6 CC/LR catalog), but you should not use the catalogue LR 5 more. There is no benefit, just use the most recent catalog.

  Yes, your brushes and presets and calibrations automatically become part of the new catalog.

• Questions about the parameters of database using a fast recovery area and the writing of two copies of archived redo logs.

  My databases are 11.2.0.3.7 Enterprise Edition. My OS is AIX 7.1.

  I am to convert databases to use individual zones of rapid recovery and have two questions about what values to assign to database settings related to archived redo logs. This example refers to a database.

  I read that if I specify

  Log_archive_dest_1 =' LOCATION = USE_DB_RECOVERY_FILE_DEST'

  the names of newspapers archived redo written in the default quick recovery area is '% t_%S_%r.dbf '.

  In the past my archived redo logs have been appointed based on the parameter

  log_archive_format='GPAIDT_archive_log_%t_%s_%r.arc'

  I think log_archive_format will be ignored for logs archived redo written in the fast recovery area.

  I am planning to write a second copy of the archived redo logs based on the parameter

  ALTER system set log_archive_dest_2 = ' LOCATION = / t07/admin/GPAIDT/arch.

  If I do this, the copy of logs placed in /t07 will be called '% t_%S_%r.dbf' or 'GPAIDT_archive_log_%t_%s_%r.arc '?

  Before my use of a fast recovery area, I used the OEM 12 c Console to specify settings of backup of database that has been deleted and archived redo logs after 1 backup. Oracle manuals say rather specify a deletion of "none" policy and allow Oracle delete newspapers in the area of fast recovery if necessary. Since I got to keep a second copy of these log files in /t07 should I keep the policy that says to delete logs after 1 backup? If I don't do that, how will they removed from /t07?

  Thank you

  Bill

  If I do this, the copy of logs placed in /t07 will be called '% t_%S_%r.dbf' or 'GPAIDT_archive_log_%t_%s_%r.arc '?

  They will be "GPAIDT_archive_log_%t_%s_%r.arc". LOG_ARCHIVE_FORMAT is only ignored for directories under OMF.

  Since I got to keep a second copy of these log files in /t07 should I keep the policy that says to delete logs after 1 backup? If I don't do that, how will they removed from /t07?

  You can hold the deletion policy as it is. Oracle documentation, defining the STRATEGY of the ARCHIVELOG DELETION: "the deletion of archived newspaper policy applies to logs archive destinations, including the area of fast recovery."

• Question about ticks in time

  I have a question about the number of ticks.

  CREATE function abc (netTicks in number)

  RETURNS THE TIMESTAMP

  as

  DATE date1: = '' 2010-11-01;

  v_ticks_for_2010_11_01 NUMBER (19.0): = 634241664000000000; -I did not understand how this number came

  v_ticks_in_a_second NUMBER (19.0): = 10000000; -THERE ARE 10 MILLION OF TICKS IN ONE SECOND

  Start

  utils. DateAdd ('SECOND', ((netTicks-v_ticks_for_2010_11_01) / v_ticks_in_a_second), date1); - what do what is this function?

  end

  /

  Thank you

  Hello

  NewLearner wrote:

  Hi, I have a data type of bigint type in SQL server. During the migration I changed it to number (19.0) in oracle. But how to have a variable equal to bigint in oracle that is coming as an input parameter. I can not give number (19.0) for the input parameter. His gift of syntax error. How to make this support in oracle?

  In the function declaration, you give just the type of data (e.g., NUMBER).  Sizes, as NUMBER (19, 0) , are given to variables that pass to the function.  For example:

  DECLARE

  x_ticks NUMBER (19, 0): =...;

  x_ts TIMESTAMP

  BEGIN

  x_tx: = abc (x_ticks);

  ...

  When writing to abc, suffice to say that it will be passed a NUMBER.  When you call with a certain NUMBER (19, 0), then it will use this NUMEBR (19, 0) value.

  Also in the Sub function return to_timestamp (' 2014-01-01') + interval '10' sec; instead of having fixed the value of 10 for the interval. I want to spend a dynamic value. example: something like v_interval: = (a - b) / c; return to_timestamp ('2010-11-01') + v_interval second interval;  Help, please

  TO_TIMESTAMP call with 1 single argument is just begging for trouble.  Always use a 2nd argument, for example

  TO_TIMESTAMP ('2014-01-01', "YYYY-MM-DD")

  Rather than use a literal INTERVAL here, you could use a variable INTERVAL, use NUMTODSINTERVAL to convert a variable NUMBER of INTERVAL.

• Question about hdd comments

  Hello

  My name is Tigran.

  First of all excuse me for my English.

  I have a question about comments HDD.

  I have a windows 7 machine 19.ne 60 GB provisioned thin disc comments.

  Today, I delete some files from the guest operating system and I free on about 20 GB of disk space. Now in my guest os used space on disk is of about 30 GB, but in vcenter disk space is always 50 GB. I understand that thin provisioned disk space grows when add us files to this disc, what would you say to resize to the bottom of the disk space?

  Thanks in advance.

  Unfortunately a virtual disc service end increases only in size if necessary, but does not automatically decrease if less space is needed for the guest operating system. If you want or need to reduce the size of the virtual disk, would be to run VMware Converter and make a volume base conversion (rather than on the disk).

  André

• Questions about migration on server 1 for win 7 PC temporarily

  Hello, I am charged with moving that customers 2 of our current of 2 to VMware host separate Windows 7 64-bit PCs TEMPORARILY so that I can install for free ESXi 5.1 as the new host (replacing the current host, which is a Standard operating system Windows Server 2003 on a server Dell Poweredge 2950 using VMware Server 1.0.10).  After the ESXi installation on the server, I intend to spend both clients as they exist now to the new ESXi host.

  I have a few questions about this project, and I hope I can pull your knowledge to help me.  My question is:

  (1) is this a feasible plan?

  (2) what methods would you recommend using?

  (3) should what tools I use?

  (4) can what version of VMware (free) I use on the 2 Windows 7 workstations to serve temporary guest?  A customer is our Standard Windows 2003 domain controller, and the 2nd is an email server and Linux-based web.  I intended to put each on a separate office.

  Any help you offer is greatly appreciated!

  Thank you

  D. Pichard

  You can use vmware player as a free virtual machine player.

  Use vmware converter to convert your servers.

  Is not recommneded for convert DCs however, what you might do, it is to build a new one. However, it is possible.

  the dell 2950: your host in the HCL as compatible uses 5.x

• A few questions about the colors of Patone

  I have a few questions about patone color since it is the first time that I use. I want to use them to create a paper letterhead and business cards in two colors.

  1)

  I don't understand that no sex is more than coated patone washed out colors. I heard that it's because the way paper absorbs the inkt. That is why the same results inkt in different colors on different papers (right?). My question is why is the patone black no sex so different than black normal (c = 0 m = 0 y = 0, k = 100) or black intense:

  

  When I print a normal document with cmyk, I can get pretty dark black color. How is it that I can't have this dark with patone color black color? Even text documents printed on a cheap printer can get a darker color than the color of Patone. He looks way too grey for me.

  (2) a first model, I want to print of patone in CMYK color (since I have like 10 different colors on a page of quick comparison). I know these CMYK colors distinguish the colors of patone and I can't get a representation of 100%. But is there a way to convert patone CMYK values?

  I hope some of you can help me with my questions.

  Thank you.

  You can get shades CMYK Pantone in Illustrator, (Swatches Panel > Open Swatch Library > color books > + PANTONE Color Bridge Coated or lying) but in my opinion, what's the point?  If you print to a digital printer, just use RGB (HSB) or CMYK. Personally, I never use CMYK called "equivalents." from Pantone

  Pantone colors are all mixed pigmented inks, which are fluorescent beyond the limits of the range of RGB and CMYK in particular. The original Pantone Matching System (PMS) was created for the printing industry. He described formulations of ink pigmented for each of its colors.

  Most digital printers (laser or inkjet) use CMYK. The range of CMYK is MUCH SMALLER than many mixed inks, printed on papers either paved or unpaved can deliver. When you specify no sex Pantone ink in artificial intelligence, according to Pantone conversion tables, HAVE "about" what will look like this color on a sheet no bed, try using CMYK. -In my opinion, this has little relevance to the real world conditions and should be avoided in most situations.

  If your project must be printed on a press printing with Pantone inks spots, then by all means, use Pantone colors. But don't trust the colors of the screen; rather get a Pantone swatch book and watch real inks on paper lying and uncoated, depending on the stock you will use on the press.

  With printing decreases rapidly for inkjet and web printers, Pantone has attempted to expand its relevance beyond the traction-date of publication (in the books and software alliances, with one such as Adobe) his old PMS inks and their supposed equivalent LAB and CMYK. I say "supposed" because even once, monitors RGB and CMYK inks can never be literally equivalent to many Pantone inks. But if you go to your project on a printing press printing, Pantone inks are still very relevant as of the "tones".

  I also put my preferences I > appearance of black both display all blacks accurately and output all blacks accurately. The only exception to this may be when you print on a digital printer, where there should be no problem checking.

  Rich black in artificial intelligence is a phenomenon of the screen, at least in the Prefs > appearance of Black, you specify also "out all inks like Rich Black"-something I'd do it EVER do so out for a real printing press. Still, I put my black people in artificial intelligence at the "output All Blacks Acurately" during a press release. If you fail to do so, then the press you will see any minor issue registration, with C, M and look at the back, especially around black characters.  UGH!

  Good luck!  :+)

• Questions about the installation of ColdFusion 9.0.2 version of existing in version 9.0.1

  Hello

  I'm currently running ColdFusion 9.0.1 enterprise edition and plan to upgrade to version 9.0.2 version. I understand that this requires uninstalling existing 9.0.1 and perform a new installation of version 9.0.2 version. My concerns are below:

  1. for the installation of the 9.0.2 version the 9.0.2 installer (demo / trial version) must be downloaded and the existing serial number (used in version 9.0.1) can be given during installation to convert it in fully registered mode - please correct me if my interpretation is incorrect here. My question is will the existing serial key (as shown in the page Admin of CF 9.0.1 version version) work with the 9.0.2 version as well?

  2. There are many features that are present in the current 9.0.1 version - for example the sources of data configured in the Admin see Y page there a way I can save these configurations of the existing version and to migrate settings to the new 9.0.2 install, or what I have to do the entire configuration manually after the installation of new? Data sources is something I can think; What other configurations can I save, if such a provision is available?

  3. in the installation of the 9.0.2 version there is a question about "configure the Web server for CF Connector" allows me to add Web/sites Internet servers during installation. If I select "built-in Web server" as the option (so do not configure any Web-site Web server), can I change this and configure Server/site later, after compeleting installation?

  What would be the things I need to be careful during this installation to version 9.0.2 from 9.0.1?

  Thank you!

  Arun-

  I did a successful version 9.0.2; installation answering my own questions, for the benefit of future development-

  1. Yes. Only the serial number is required (as shown in the Page of the CF Admin of existing facility)

  2 configurations (for example: data sources) can be exported. Go to CF Admin Page, click on packaging & deployment, click on Archives of CF. Basically, you export settings as files with the extension archive. car. Once exported from the current installation, it can be imported by clicking on the button deploying car file.

  3 server configuration can be modified (Add/Remove) by using the "Web Server Configuration Tool" which is installed by default with CF 9. You can find it under program files (windows OS).

  I had some problems during the installation. After installation, the CF Admin page would not be made. Virtually no cfm page don't take charge, because the extension is not known by the IIS (or the server you are using). To set this up, use the "Web Server Config Tool" mentioned above. This launch and activate the check box that is on the rendering cfm pages (forgot the exact name). Once this is done, cfm pages must load. I had to enable this and then do a reinstall but.

  -arun

• Questions about tables in text boxes

  When I convert the text to a table, there is a small space between the text block and the table. I have two questions about this:

  1. Is it possible to remove this gap? I put the text block options set spacing to 0 and gutter to 0 and spacing of table before and after to 0.
  2. Is it possible to create a table that is not in a block of text, especially when converting text to a table?

  Attached is a few screenshots that I hope will be useful. In the first image, East of the limit of the framework text in magenta and the structure of the table is in light blue. The gap between the blue magenta and light vertical lines on the left, that's what I want to remove.

  

  Tables are always in a text frame, and in fact, they are part of a paragraph, so I would check the assigned to this paragraph paragraph style and see if there is a left indent applied, or perhaps a paragraph alignment is set to something other than the left.