Question about version first submit 1.0 and 1.1, with some corrections?

Similar Questions

• Questions about versions of Windows for SQL and vcenter server operating system

  Can anyone provide information on versions of the OS.   Here's what we're looking to add:

  1 SQL server 2005 with service pack 2 or sql server 2008.  What version of Windows it resides on?  Windows 2003?  2008?

  2 Vcenter.   What version of windows?   Windows 2003?  2008?

  I looked through my books and no luck.

  Thank you

  José

  See the VMware vSphere compatibility matrices

  as the Guest Operating System Installation Guide

  as well as http://msdn.microsoft.com/en-us/library/ms143506%28v=sql.90%29.aspx

• Questions about an average of response spectrum and frequency of feeding mode.

  Hello

  I have a few questions about an average of mode. When I generate a sinusoidal signal from one output to two input channels channel to see if my DAQ card works well and vector averaged in the power spectrum for DFT, the amplitudes was different from the previous one of the amplitude, which was supposed to be 1 v peak. They range from 0.5 v to 0.6 v peak. When the calculation of the average model is RMS, the amplitudes were close to 1. I wonder what are the fomulas of RMS and average vector. Does that mean that I could not accurate if I use an average of vector? In a time of frequency response, why I coherences of difference and the amplitudes using the vector and the mean quadratic value?

  Thank you

  Ningyu

  rico1985,

  The differences in modes of generation are as they sound: 1 sample output only a sample writing, N samples will be released however many samples configure you for each entry, and the continuous samples released samples continuously until a specified user action happens (you press the stop button or a logic that you created gets fulfulled). The range of Signal output allows you to set a ceiling high and low level of your output signal and it only affects the quality keeping in this beach. Timing to set a deadline for the time between the acquisition of the sample. If a new sample becomes unavailable before the timeout setting, you will get an error. This is useful for looking at a network, because if the network goes down and you stop getting data from a machine and then you would like to know about it. I point you to those videos that are short tutorials on how to make the most of these actions in SignalExpress.The SignalExpress 3.0 Help file is also your first point of contact for all your questions on getting started. These two resources should get you up and running in SignalExpress in no time. (either by the way all your questions answered using these resources) Bravo!

• Question about my first payment of cisco ISE

  Hi, thanks in advance,

  It's my first time to be implemented cisco ISE 1.1.4 with Vmware Esxi v5.5

  I did so far process

  -Created NTP, DNS, AD, of course ESXI running and have link between each other, ISE is able to synchronize the time with ntp server and DNS, etc AD.

  -J' created repository for installation of application bundle - which is ise-appbundle - 1.1.4.218.i386 that I could not find any fault of the application.

  However, while I was doing installation and it said ' / opt/oracle/base/product/11.2.0/dbhome_1/bin/lsnrctl: error while loading shared libraries: libclntsh.so.11.1: cannot open shared object file: no such file or directory "."

  I already check some forums and communities, and I have no problem about synchronizing time on dns with ntp and ISE itself with ntp.

  I have no firewall between devices and no other network devices don't interfere.

  and at the end of newspapers, it comes up like this

  ########################################################################################

  ERROR: CANNOT START DB!

  Database is not available in 240 seconds Timeout.

  This could be the result of incorrect network interface configuration

  or the lack of resources on the device or the virtual computer. Please solve the problem, run the following CLI to start the database again:

  "reset - config application ise"

  ########################################################################################

  Im just lost now... Any recommendation?

  Well, it is true that the CCIE Security use ISE 1.1 as its base. So for the installation of laboratory only for this purpose, you might go with him.

  90% of the things are similar and the concepts are identical to 1.1 to 1.3. The first versions were buggy however and we recommend to all production users go with 1.3.

  A new installation of 1.14 should be OK; but you would not use the Archives of gz appbundle ISE - you need to use the new installation ISO.

  Please see screenshot below.

  ise_1.1.4_packages.PNG

  

• Consider purchase of Wacom Cintiq 27 HD Touch - Questions about the tactile feature in Photoshop and Lightroom

  I'm considering buying a 27 HD Touch of Wacom Cintiq monitor. I have a few questions about the two programs Adobe and their use of the 'touch' feature - Photoshop CS6 and Lightroom 5.7 running on Windows 7.

  1 problems related to touch a feature in Lightroom and Photoshop CS6 and 5 resolved that you see on the forums of Wacom a year ago?

  2. If so, is there sufficient value gained through the tactile feature in Photoshop CS6 and Lightroom 5 to justify the $500 price difference between the Cintiq 27 HD vs Touch HD? (I realize that this is a subjective question based on the abundance of its cash).

  3. I intend to stay with CS6 as long as possible to avoid a monthly subscription, BUT I wonder if buy the Touch HD can provide additional key features in future releases of these products that do not exist currently. (It is a pie in the kind of sky in question).

  Thank you!

  Kent

  Support for Photoshop Touch is added by CC 2014.2.2.  However as the Pro Intuos Wacom tablets with touch can be used with earlier versions of Photoshop and the Wacom Tablets Configurator can custom features can be used with Photoshop touch tablets.  I use LR but I don't know that the same thing would be true for her. You can configure the setting for many applications. The device driver knows which application its interfacing with and uses the parameter set for each...

  I have disable most of touch when using Photoshop.  The main reason why I have a Tablet is Photoshop Brush tools. Like Eraser, clone stamp, etc, nothing is better then a pen when it come to create the layer mask.  For most programs, I always use a mouse and I use the keyboard, the mouse and the pen with Photoshop...

  I never wanted a Cintig I do not have my hand between my eyes and the work. I'm not an artist.

• Questions after TimesTen first trial: memory footprint and query performance

  Hello!
  
  I'm testing TimesTen In - Memory Database cache to see if it could help with some ad hoc reports questioned this need too long to run in our Oracle database.
  
  Here is the configuration:
  
  1.) TimesTen Server CPU Quad Core 2 with 32 GB of RAM running Windows 2003 x 64.
  
  2.) put in place two cachegroups read-only: a little for a quick test and the real thing that maps to a table of the database as such:
  
  
  Database table looks like:
  

    CREATE TABLE "TB_BD" 
     (   
     "VALUE" NUMBER NOT NULL ENABLE, 
     "TIME_UTC" TIMESTAMP (6) NOT NULL ENABLE, 
     "ASSIGNED_TO_ID" NUMBER NOT NULL ENABLE, 
     "EVENT_ID" NUMBER, 
     "ID" NUMBER NOT NULL ENABLE, 
     "ID_LABEL" NUMBER NOT NULL ENABLE, 
     "ID_ALARM" NUMBER, 
      CONSTRAINT "PK_TB_BD" PRIMARY KEY ("ID")  
     );

  Oracle database table has 1.367.336.329 lines and table segments are approximately 61 GB, so a medium line takes about 46 bytes.
  
  Since I have 32 GB in the TimesTen machine, I created the Group cache with a where predicate in the ID column that only the 98.191.284 most recent ranks get in the cache group. In the Oracle database, it is around 4.2 GB of data.
  
  After the cache loading dssize group returns:
  

  Command> dssize
  
    PERM_ALLOCATED_SIZE:      26624000
    PERM_IN_USE_SIZE:         19772852
    PERM_IN_USE_HIGH_WATER:   26622892
    TEMP_ALLOCATED_SIZE:      32768
    TEMP_IN_USE_SIZE:         10570
    TEMP_IN_USE_HIGH_WATER:   14192
  
    (Note: the high PERM_IN_USE_HIGH_WATER comes from a first test where I tried to cache too many rows)

  I then ran on the TimesTen machine:
  

  tisql> select avg(value) from tb_bd;

  She is still going after 10 hours, so I can already tell that the query execution time is not really met my expectations. :-)
  
  In the Windows Task Manager, I see that tisql constantly use 13% of CPU (= 100% / 8 cores), so that it uses only a carrot, but even he was using all the hearts and the execution time would be 1/8th, it wouldn't meet my expectation. :-)
  
  I also see in the the Windows Task Manager who becomes slowly higher and higher, currently the 'MemUsage' of my tisq 14FR processl. I believe that it is shared memory mapping that is already mapped by the TimesTen process that has approximately 24 GB mapped. The query is probably 53% through and the total time of queries can be around 20 hours.
  
  
  My questions:
  
  1.) for what I tested, 1 GB of data in the table Oracle needs about 4-5 gigabytes of memory in the TimesTen database. I read a post on the forum who has explained with ' data are optimized for performance, no space in TT ", but I don't quite buy it. A factor of 4-5 means that the CPU must spend 4 to 5 times the amount of data. The data is not compressed in the Oracle database, but it is in its natural binary form. I would like to understand why data takes much more space in TT - like when you have a numeric in Oracle, which TT do with it to make it 4 - 5 times bigger and why does do that?
  
  2.) regarding the performance of the queries: how long can take even to the base allows to browse about 20 GB of data in memory, number of lines, summarize the NUMBER of a column with a division to get the avg (< column >)? Is there something flawed with my setup?
  
  
  Thanks for the ideas!
  
  Kind regards
  Marcus
  
  Published by: user11973438 on 06.09.2012 23:27

  I agree that the use of 4 - 5 times more memory than Oracle is far from optimal. Your drawing is unfortunately a little pathological; normally we see more like 2 - 3 times (which is still too really0. There are many internal differences between Oracle and TimesTen in the way data are stored internally. Some are historical, and some are due to the optimization of performance rather than storage efficiency.

  For example:

  1 oracle lines are always variable storage length while TimesTen lines are always of fixed length in storage.

  2. in Oracle, a column defined as NUMBER only occupies the space needed based on the stored value. In TimesTen SEVERAL column always occupies the space to store the maximum possible precision and therefore takes up 22 bytes. You can reduce it by restricting explicitly using NUMBER (n) or NUMBER(n,p).

  3 TimesTen does not support any kind of parallel query within a single data store. All queries will be run using maximum core CPU; Oracle DB supports parallel queries and so it can make a big difference for certain types of application.

  4. NUMBER is implemented in software and is relatively ineffective. Calculating the average of almost 100M lines will take time... You can try to change cela a native binary type (TT_INTEGER, TT_BIGINT, BINARY_DOUBLE depending on your data); This will no doubt give a good improvement (but see point 5 below).

  5. with a database of this size, it is possible that Windows made a lot of paging, while the query is running. I myself also observed on Windows it seems to be a penalty when a process key/maps a page for the first time. You should monitor the paging activity via the task manager that the query is run. All important pagination will really affect the performance. Also, try to execute the query a second time without disconnecting ttIsql this may also show an advantage. On Unix/Linux platforms, we provide an option (MemoryLock == 4) to lock the entire database in physical memory to prevent any paging, but is not available under Windows.

  Chris

• A question about the order of COLUMN sqlplus and PL/SQL

  Hello everyone.
  
  
  
  I would like to ask a question about sqlplus command COLUMN that I use in order to define the length of my queries of output columns. So, for example, I run something like:
  

  COLUMN market FORMAT a20

  That is why any column with the name 'the market' will be composed by sqlplus as 20 characters.
  
  Currently I'm working on a PL/SQL script that makes this automatic procedure, in other words, instead of manually write for each column in the above COLUMN order, it uses the DBMS_SQL. He read first as input the name of the table and then inside a loop, it detects the maximum length.
  
  For those interested, here is the Oracle documentation page that I found (example 8)
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_sql.htm
  
  If everything worked well enough I managed to recover the maximum of each column in my table length, except that I don't know how to use the COLUMN sqlplus command in my PL/SQL block. I would like to do something like that (it's just a pseudo-code)
  

  FOR colIndex in 1 .. numberOfColumns LOOP
          currentColumnName = getColumnName(tableDescriptionObject, colIndex);
          currentColumnLength = getColumnLength(tableDescriptionObject, colIndex);
          
          COLUMN  currentColumnName FORMAT a -- and here after 'FORMAT a' I have to write currentColumnLenth but I don't know how to proceed.
  
  END LOOP;

  I would like to know is there a command in PL/SQL to define the appropriate column typeset in sqlplus length?
  
  
  Thanks in advance,
  Dariyoosh

  Hi, Dariyoosh,

  Sory, I don't think that there is a simple way to publish SQL * most orders fom PL/SQL.
  PL/SQL runs in the database (back-end); There isn't any direct contact with SQL * more at the front end.

  The best way I know is that PL/SQL script (myfile.sql) with orders of the COLUMN, and then have SQL * more run the script (@myfile).

• Suggestions and Questions about the upgrade my Hardrive Mac and Ram.

  Hi This is my first time asking something in the forums. (At least I think) Well anyway, I got the Macbook Pro Mid 2012 13 "with the retina also runs the OS El captain. I do computer for school and sometimes animation video editing and ive noticed some performance as my projects get bigger and bigger issues. I want to improve my mac, but I'm not very tech savy and don't want to do something useless, so I had a few questions, I wanted to ask you.

  Do I need for my hard drive and my Ram?

  What effect will the upgrade of my Ram and what effect will be upgrading my hard drive with an SSD?

  I saw this SSD online and thought of novice opion that sounds get Id more bang for my buck (link) with her. Is this good? What more to kill? WiIll it still works? Could you suggest some other good affordable options?

  My next question if I decide to upgrade my Ram can provide you with some good affordable links to buy of new RAM sticks, is also 8 GB, the best he can do?

  My next question I watched a few videos online and by installing the updates level looks really easy and fast. But I use bootcamp (to play games sometimes), and I wanted to know if I save my files on my drive as ive seen people do videos, (something to wipe the drive and put it back in after installing updates) will be I lose my windows 7, I lost the disc to reinstall and he check so I really want to buy a new also do not want to lose the things I put in memory.

  From the retina MacBooks you is impossible to pass the ram as it is soldered to the logic board. As with the hard drive, it's just a card ssd and you can't get those anywhere because their hard to find.

• question about version nfr

  Hello

  a question about the nfr vshere 4.1 version

  If a version nfr vshere 4.1

  I do use it for my client (under a free license)?

  Thank you, Alberto

  I do use it for my client (under a free license)?

  In accordance with article KB as cloudzone mentioned, it is NOT allowed!

  Article:

  Any such software NFR copies may not be copied, resold, hosted or distributed to third parties.

  André

• Where can I ask a handful of general order questions about Firefox OS as a consumer and get the answers? (a forum or something similar)

  I have about seven questions about Firefox OS. I'm potentially interested in opting for a tablet that works instead of Android or iOS. I couldn't find a place to ask questions like that. Thank you!

  https://support.Mozilla.org/en-us/forums/Firefox-OS-English-Forum

  There is another option.

• Access user (UAC) shield appears on a large number of my programs now after Windows Update download and cause problems with some programs, no one knows how to fix this? (Windows 7) (Windows Update post a coupe of weeks)

  Hello

  Windows Update recently made a lot of downloads on my computer about two weeks ago (I run it automatically and it works usually weekly) and he has made some changes to my system that create errors or difficulties with certain programs. The shield of the UAC is now appearing on many more programs for some reason any and now I'm a guest whenever a program is available. which is also appear on my AntiVirus program. Action Center flag appears almost every day now with warnings saying that my AntiVirus program and spyware is off (not sure if this is related to the UAC shield), but when I check my AntiVirus program everything works and after access; the flag of the Action Center shows while all right. Nobody knows how to solve this problem and get rid of the ecu of the UAC on programs (or at least some of them I want to be invited on)? Any help would be greatly appreciated. Thank you

  I'm sure I've upgraded to Vista SP2, but not absolute, I can't find a lot of information in the case of the newspapers with the service pack level... only vista combined with some process is perceptible. I bought July ' 09 new and it came pre-installed with Vista on it. I think this is the tool I used to remove McAfee on this; It also came with Norton as an alternative option and both have been removed using their tools to uninstall BitDefender installation instructions walked me through the location and the removal of two of them before installing BitDefender on the computer. My user account is configured as an administrator, but when I right click on programs with the shield of the UAC on them, I'm not running as an administrator. The UAC slider is set at the 2nd ranked (by default); but I do not know how it was listed previous, I wondered about moving down one notch (but he advises not and I don't want to spoil anything).

• Question about the temperature of the processor and the use of Vista on Satellite Pro M70

  Hello

  I have Satellite Pro M70-113 and it has Intel mobile Pentium 1.86 GHz CPU.
  The problem is that its normal temperature is 80 degrees Celsius... while I use the browser and other common programs...
  and recently it automatically shut off twice and pressing the button works / stop won't turn on... when I unplugged, replugged the power cord so I could only turn it on...

  And while playing games, it would of course go above 100 degrees...

  So you know what is the max temp through which the CPU can go without stop or damage the CPU or surrounding a circuit?
  I know that when I bought this laptop about 2 years back... it was not warm this...

  And by the way this laptop came with WXP Pro preinstalled and doesn't show any vista capable logo (because at the time, there was no such promotion of Microsoft, as it was the year 2005, Nov).

  Now, I use vista and upgraded to 1 GB of RAM and I have no problem using the Vista pc.

  Secondly, I did not update my BIOS to version the most recent is available.

  Although I'd love to have updated the BIOS but I worry about the bad flashing and says BIOS driver update page that the version of the BIOS doesn't support vista - whatever that means? If I go back to Windows XP Home edition after installing the BIOS for vista, the pc will not be usable for WXP or what?

  Is there any link to the processor heats to the old version of the BIOS, I'm still using... will update BIOS facilitated the temperature?

  Please answer.

  Thank you.

  Hello

  Wow, you have a lot of questions. :) If I was sort of a support guy to it all with such question much. ;)

  No, I'm kidding; with regard to your questions:

  First of all you must clean your CPU cooling with compressed air, because if the breakdown is clobbed with dust and then it s just logical that your processor is a little bit more 'hot' then 2 years before.

  The max temp is available on the website of intel. I think that the section is called "intel spec finder" or something similar.
  With Vista and bios: you need to update your bios, since then some improvements are making more compatible bios for vista.
  But don t worry, XP won´t be unusable if you update your bios, the bios-update brings improvements for vista, but does not degrade anything about XP.

  If the bios update will solve this temporary problem is not clearly, rather a cleaning as I told you will be better.

  Welcome them

• Questions about versions

  On-site I JDeveloper 11.1.1.5 with patch 12399372 and when I go to 'about' I see this:
  

  ADF Business Components     11.1.1.60.13
  Java(TM) Platform     1.6.0_24
  Oracle IDE          11.1.1.5.37.60.13
  Versioning Support     11.1.1.5.37.60.13

  Now in the sense that we run in Bug 13058228 : CONVERTEREXCEPTION: not supported SIMPLESELECTMANYRENDERER of MODEL which is weird, because it is reported only for R2 (perhaps based bug 12676484 shows more but I'm not allowed to see)
  I don't know what TERM ADF we run it, it's a WLS 10.3.5 installation so that they could not have installed ADF 11R2 accidentally, could they do it?
  
  I found this blog http://tompeez.wordpress.com/2012/02/05/adf-how-to-find-out-which-adf-version-is-installed-on-a-manged-weblogic-server/ and I'm going to try to have this Web service installed on the server of the acceptance.
  
  However, I have a few questions:
  -Is a production server running ADF 11.1.1.5 need patch 12399372 ? (I did not)
  -The webservice 11.1.1.60.13 on my local WLS says it's still officially 11.1.1.5 right? not 11.1.1.6?
  n ' anyone can access to bug 12676484 and tell me that the other versions of 11.1.2.0.0 have this bug?
  
  Thanks for your help!

  "I'm not sure what TERM ADF we run it, it's a WLS 10.3.5 installation so that they could not have installed ADF 11R2 accidentally, could they do it?

  GR 11, 2 can run on servers time 10.3.5 and 10.3.6 then Yes, it is possible.

  ' Is a production server running ADF 11.1.1.5 need patch 12399372 ? (I didn't) »

  Not that I know of. But you may need the bug fix. Confirm with Oracle Support.

  "The webservice 11.1.1.60.13 on my local WLS says it's still officially 11.1.1.5 right? not 11.1.1.6? »

  WebService? Do you mean the version of the component "ADF business components ' box you listed in your message about? If yes the key to version number is the last 4 digits that correspond with the JDev 11.1.1.5.0 build number 6013.

  "can anyone access bug 12676484 and tell me that the other versions of 11.1.2.0.0 have this bug?

  The system of bugs does not tell us this, should be so each version to test. However what I can tell you there is a backport fix for 11.1.1.6.0 which means that the bug was present at least that version. The fact this 12399372 patch for bug 12676484 tells us that it is too 11.1.1.5.0 I guess.

  Try to figure out the bug, patch and version numbers are a pretty tedious task for people on this forum to keep track. May I suggest that apply you for taking in charge because that's what they are paid to do.

  CM.

• Can someone help me with questions about the first on Mac?

  I have the trial version on my mac and several questions, I want to solve before you buy.  When I open the software first, he asked if I wanted to download additional content and I; However, the theme of the film is moment that shows a preview is the one that was originally there.  The others are empty, although I can apply to my project.  On the theme of the birthday party, it also shows in my project window into the birthday party some items that I don't see in the film, and a red sign pops up saying "media offline".  After, playback is very jerky and seems to stop at times.  The finished film will run more smoothly and have all the items?    Another problem is that I can only find 12 soundtracks that are in the media with my clips window.  Is that all you have to choose for your projects?

  Another annoyance, that's when I clicked on the "Inspiration Browser" help advice at the bottom, he said I had to download Adobe Reader and I did. However, it continues to display the message and won't let me watch some of the tutorials, although a few works.  (Adobe is installed and I rebooted the computer).

  I want to buy Photoshop Elements and first package but would like to know when I go to the paid version, my problems will be solved.  The project I'm working on that will have the "banner of trial" deleted?  Should I uninstall the trial version and reinstall the paid software?   Also, I would like to know if it is worthwhile to get as edition for extra storage and features.

  I appreciate any help as when I called Adobe they would not answer questions from users of the trial version and directed me to this forum.  (Not a good way to sell their software).

  If the OP is referring to SmartSound QuickTracks, this ARTICLE might be useful. It covers the range of SmartSound Software and music, so there is more information, we're going to need just to QuickTracks. Personally, I use a lot of SmartSound Software and their music. Hardly a project is complete without a material SmartSound in there somewhere.

  Good luck

  Hunt

• Question about commissioning of the E20s - CUCM and TMS

  If we now run software CUCM 8.6.2 and 4.1 E20.  I played with CUCM and TMS supply by and a few questions.

  It seems that there are some features that can be set via the TMS models that cannot be resolved via CUCM (MTU, custom, etc commands).  Is it possible to apply these settings through TMS while having the unit registered in CUCM?

  Essentially, I want my call recording platform CUCM and control, but want to keep the granularity that TMS offers in terms of commissioning etc..  I expect the same problems with C-series, etc.

  Am I right in saying that, in order to get the E20 to join CUCM, I need to define the external Manager to "CUCM", and thus eliminate any possibility of TMS to manage? Otherwise, what is I could have managed by TMS and then set the SIP of the E20 to point to CUCM via templates in TMS?

  Any tips on that?

  Hello

  Having both TMS and CUCM to manage endpoints is not a good idea (yet). TMS and CUCM will return to each of the other toes with unpredictable results.

  With TMS 13.2, I understand that you should be able to import the CUCM in TMS and then find all systems registered to it and import these into TMS, however in this case TMS plan only systems conferences and will manage them not active (you can see status of the call as well).  13.2 TMS is not yet released, so that's what I said must be in this version.

  So basically now if you use CUCM, use CUCM provisioning and don't use TMS.  We focus on interactions with systems registered with CUCM TMS and it will be more developed on this in the future.  I recommend you check out the TMS13.2 release notes released to see if it is mentioned.

  Thank you