question about version nfr

Similar Questions

• Questions about versions

  On-site I JDeveloper 11.1.1.5 with patch 12399372 and when I go to 'about' I see this:
  

  ADF Business Components     11.1.1.60.13
  Java(TM) Platform     1.6.0_24
  Oracle IDE          11.1.1.5.37.60.13
  Versioning Support     11.1.1.5.37.60.13

  Now in the sense that we run in Bug 13058228 : CONVERTEREXCEPTION: not supported SIMPLESELECTMANYRENDERER of MODEL which is weird, because it is reported only for R2 (perhaps based bug 12676484 shows more but I'm not allowed to see)
  I don't know what TERM ADF we run it, it's a WLS 10.3.5 installation so that they could not have installed ADF 11R2 accidentally, could they do it?
  
  I found this blog http://tompeez.wordpress.com/2012/02/05/adf-how-to-find-out-which-adf-version-is-installed-on-a-manged-weblogic-server/ and I'm going to try to have this Web service installed on the server of the acceptance.
  
  However, I have a few questions:
  -Is a production server running ADF 11.1.1.5 need patch 12399372 ? (I did not)
  -The webservice 11.1.1.60.13 on my local WLS says it's still officially 11.1.1.5 right? not 11.1.1.6?
  n ' anyone can access to bug 12676484 and tell me that the other versions of 11.1.2.0.0 have this bug?
  
  Thanks for your help!

  "I'm not sure what TERM ADF we run it, it's a WLS 10.3.5 installation so that they could not have installed ADF 11R2 accidentally, could they do it?

  GR 11, 2 can run on servers time 10.3.5 and 10.3.6 then Yes, it is possible.

  ' Is a production server running ADF 11.1.1.5 need patch 12399372 ? (I didn't) »

  Not that I know of. But you may need the bug fix. Confirm with Oracle Support.

  "The webservice 11.1.1.60.13 on my local WLS says it's still officially 11.1.1.5 right? not 11.1.1.6? »

  WebService? Do you mean the version of the component "ADF business components ' box you listed in your message about? If yes the key to version number is the last 4 digits that correspond with the JDev 11.1.1.5.0 build number 6013.

  "can anyone access bug 12676484 and tell me that the other versions of 11.1.2.0.0 have this bug?

  The system of bugs does not tell us this, should be so each version to test. However what I can tell you there is a backport fix for 11.1.1.6.0 which means that the bug was present at least that version. The fact this 12399372 patch for bug 12676484 tells us that it is too 11.1.1.5.0 I guess.

  Try to figure out the bug, patch and version numbers are a pretty tedious task for people on this forum to keep track. May I suggest that apply you for taking in charge because that's what they are paid to do.

  CM.

• Question about version first submit 1.0 and 1.1, with some corrections?

  Hello

  First of all excuse me if this question has already been answered here.

  If my app (version 1.0) is rejected due some bugs, what's the next step?  Fix it and submit the 1.1 version or do it with 1.0? In my case I presented version 1.1 because I couldn't do it with 1.0 as the application was already signed.

  Thank you

  You can not re - sign with the same version, so change it demanded. There is no need to go back to 1.1, however, if you do not want. There is up to four items to the version number. My last example is 1.0.4.1261... You could make 1.0.0.1 if you wanted.

• Question about Version target

  Two questions:
  
  In a version of the target, if you enter a number say 20,000 to the level parent, and I enter more than 20,000 then what is supposed to happen? Currently I have just install a target version and nothing happens, users can enter more than the value in the parent member. If I want to restrict the ability of the user to enter more that all that is in the parent, how can I do this?
  
  IF I want a change in the relative value to be distributed to children in THE REPORT I have current data in children, how to get there?

  "IF I want a change in the relative value to be distributed to children in THE REPORT I have current data in children, how to achieve that?

  Right-click on the parent account where you want to change the value, select adjust-> grid spread. Use the proportional option. Who takes care of the issue.

• Question about versions of DNG format?

  Hello

  I imported all my. Images RAW of Nikon NEF with Lightroom and I started to convert them to DNG, as seems recommended (and I want to get rid of the sidecar files when saving metadata to the files).

  However, there is an option I wonder about: "compatibility". What does this option, in practice? I have to upgrade my DNG files when new versions of the plugin Camera Raw is out? Should what compatibility option I choose for conversions again?

  Thanks in advance!

  Jonas.555333 wrote:

  Ok. What about later versions of Lightroom, you I have to upgrade all previous DNG files to the latest version then?

  You won't have to update existing images as they would not add new rendering algorithms that may arise in the future. However, all the images will change in a version containing the new rendering algorithms would be better recorded with appropriate option.

• Questions about versions of Windows for SQL and vcenter server operating system

  Can anyone provide information on versions of the OS.   Here's what we're looking to add:

  1 SQL server 2005 with service pack 2 or sql server 2008.  What version of Windows it resides on?  Windows 2003?  2008?

  2 Vcenter.   What version of windows?   Windows 2003?  2008?

  I looked through my books and no luck.

  Thank you

  José

  See the VMware vSphere compatibility matrices

  as the Guest Operating System Installation Guide

  as well as http://msdn.microsoft.com/en-us/library/ms143506%28v=sql.90%29.aspx

• Question about version of CS5 upgrade

  Hello world

  I have Adobe CS3 and want to upgrade to CS5.  I noticed that Staples sell version CS5 upgrade for a decent price.

  But it does not specify if it's for CS4 or CS3/CS2.  I contacted them, but they said that they are both the same... but I don't know if I believe them.

  Is the version upgrade to CS4 and CS3/CS2 the same thing in retail? (that is, you can enter a serial number CS4, CS3 and CS2 for the same disk or are there separate products for each previous version - i.e. CS4 update is different than a CS3 upgrade?)

  I noticed that when you buy Adobe Store or even other sites like Newegg, they are marked as 'CS4 Upgrade' and ' CS3/CS2 Upgrade', but on his single 'Upgrade' Staples and they told me it "working probably for CS3 as well.

  Link to the product on the Staples site: http://www.staples.ca/ENG/Catalog/cat_sku.asp?webid=885938 & CatIds = & AffixedCode = WW

  Your help is greatly appeciated!

  Thank you!

  J

  What product in the suite you upgrade? The price, as you note is different from CS2/CS3 from CS4.

  While prices will vary a bit, they will be very close to price all wherever you buy. If there is no indication on the site of the staple food and then go to the Adobe store and check prices here. For example, CS5 Design Premium CS4 is $ 599. For CS3/CS2 to CS5 it is $ 799.

  If you see that the price is $ 579, you can be sure it's a CS4 CS5 update. If it's $775, she'll be the CS2/CS3 upgrade.

  CS4 CS5 update won't work for you.

  Bob

• General question about the updates and version number

  I have a general question about versions and update.  I'm new on this and am in the deep end of learning I want.

  In vSphere web client, I see the following versions (these are exactly as the seller, he left a few months that I have screenshots in my documentation that match)

  Version - VMware ESXi, 5.1.0 1612806

  Profile - Dell (updated) ESXi - 5.1 - 799733 (A00)

  I am trying to familiarize themselves with the Update Manager and I noticed that there are a lot of patches and updates available.

  Lists of Update Manager 5 patches as "Missing" with Red x but directly above them are a list of patches with green tick indicating that "installed" - it is perhaps obvious, but im guessing 'installed' means really installed when displayed on the screen - there is an update installed, labeled "ESXI 5.1 all the update 2-' would be able to tell that it has been installed by the details of profile/version above?

  I don't think it's a big deal at this stage, but if I install all missing patches and then the details of the version/profile change in summary screen?

  I hope this makes sense.

  Thank you

  This article allows to correlate the updated version: products VMware correlating build numbers to update levels (1014508)

• Three questions about the version of the hardware and VM tools

  Hello

  I have 3 questions about equipment and tools of VM version, can someone help? Thank you in advance.

  1. is the machine hardware version virtual file OVF/EGGS associated with?  OVF/EGGS exported vSphere files contain the virtual hardware version information?

  2. review I have a VM in vSphere 6.0 platform with version 11 of hardware and the latest Tools (cam with ESXi 6.0 U2) VM, I can export to an EGG file, then import it on vSphere 5.1 platform? If can, what version of the target material is VM?

  3. can you vmtools high version with lower vSphere platform? For example, I have a virtual machine with version 11 of material and tools the latest VM (ESXi 6 U2), later I move the 5.1 ESXi virtual computer, should I go down the vmware tools? Is there a compatibility issue?

  Hello

  1. Yes, if you unzip the eggs and open the FVO in an editor you see:

  Family of virtual hardware

  0

  VMX-08

  2. you can not. Vmware 11 material is not supported by 5.1.

  3 didn't cause you cannot import vmware 11 and 5.1. Works may be more high vmtools as long as you keep the material support for 5.1 version.

  

  Best regards

• Questions about the installation of ColdFusion 9.0.2 version of existing in version 9.0.1

  Hello

  I'm currently running ColdFusion 9.0.1 enterprise edition and plan to upgrade to version 9.0.2 version. I understand that this requires uninstalling existing 9.0.1 and perform a new installation of version 9.0.2 version. My concerns are below:

  1. for the installation of the 9.0.2 version the 9.0.2 installer (demo / trial version) must be downloaded and the existing serial number (used in version 9.0.1) can be given during installation to convert it in fully registered mode - please correct me if my interpretation is incorrect here. My question is will the existing serial key (as shown in the page Admin of CF 9.0.1 version version) work with the 9.0.2 version as well?

  2. There are many features that are present in the current 9.0.1 version - for example the sources of data configured in the Admin see Y page there a way I can save these configurations of the existing version and to migrate settings to the new 9.0.2 install, or what I have to do the entire configuration manually after the installation of new? Data sources is something I can think; What other configurations can I save, if such a provision is available?

  3. in the installation of the 9.0.2 version there is a question about "configure the Web server for CF Connector" allows me to add Web/sites Internet servers during installation. If I select "built-in Web server" as the option (so do not configure any Web-site Web server), can I change this and configure Server/site later, after compeleting installation?

  What would be the things I need to be careful during this installation to version 9.0.2 from 9.0.1?

  Thank you!

  Arun-

  I did a successful version 9.0.2; installation answering my own questions, for the benefit of future development-

  1. Yes. Only the serial number is required (as shown in the Page of the CF Admin of existing facility)

  2 configurations (for example: data sources) can be exported. Go to CF Admin Page, click on packaging & deployment, click on Archives of CF. Basically, you export settings as files with the extension archive. car. Once exported from the current installation, it can be imported by clicking on the button deploying car file.

  3 server configuration can be modified (Add/Remove) by using the "Web Server Configuration Tool" which is installed by default with CF 9. You can find it under program files (windows OS).

  I had some problems during the installation. After installation, the CF Admin page would not be made. Virtually no cfm page don't take charge, because the extension is not known by the IIS (or the server you are using). To set this up, use the "Web Server Config Tool" mentioned above. This launch and activate the check box that is on the rendering cfm pages (forgot the exact name). Once this is done, cfm pages must load. I had to enable this and then do a reinstall but.

  -arun

• Several Questions about educational Versions of the software

  Well, I have several questions about teaching from Adobe software.  I will attend school in the near future (now I'm not enrolled in any type of school) and I see that Adobe has huge discounts on "educational software".

  What exactly is the difference between the "commercial" version of a program and an educational version?  Do you need some kind of student card to activate an educational version, or proof that you are in school, or something special like that?  I noticed people unopened sell educational versions on eBay and I heard there is no differences between the software, but this makes me wonder... why the price difference?

  Also, I intend on buying another Mac in the near future - probably for the school.  My second question is - with this software (education), is that I can put programs on my desktop and my laptop, or they won't work on one person on one computer?  I've heard people that serial numbers cannot be activated so many times.

  Last question.  My HDD recently crashed and I lost a good bit of things and had to re - install everything.  If this would never happen again, reinstall all Adobe programs on a hard drive nine?  Or I will meet the all 'serial numbers cannot be activated so many times?

  Very well.  I think about the fact.  Any input would be great.  Thank you.

  -Mike

  In terms of content, there normally is no real difference between the editions of the retail and educational/student. There may be some additional fonts or clip art in the commercial version, but this varies from one version to the other, and a product.

  You must qualify to buy an educational/student version. These qualifications are listed on the Adobe Web site. Normally, you must provide proof of reserve that sells licenses of software for you. You can not buy now for the reason that you will be a student in the future. You must have purchase student status.

  Unlike versions of retail, education/student Adobe versions software are not transferable. Sale of such software 'closed' on eBay must be regarded with suspicion. Adobe resellers do not offer software on eBay sales. The software is either stolen, used (but reconditioned), or pirated goods.

  Most of the Adobe software, including the Creative Suite software, can be activated at the same time on two computers owned and used by a single individual. second computer is usually a laptop, if first computer is a computer at home for students. For retail sales, usually first computer is a desktop computer and the second computer is a mobile computer or at home. Computers must not run the software at the same time. And No, two students may not share a single copy on two separate computers.

  The software can be turned on and off but after 20 or if these cycles, you will need to call Adobe and explain what is happening to get characters such cycles. If you are enabled on both systems and a hard drive or a computer turns off and you need to reinstall the software without having the possibility to disable the system blew, Adobe activation support group normally will be granted an additional activation, assuming that you do not have a record of abusing the privilege (as your hard drive breaks down once a month!).

  -Dov

• Qosmio E10: Question about PX1211E-1TVD Toshiba DVB - T USB Tuner

  Hey all,.
  While the analog TV tuner that is inside my Qomsio E10 is OK for now, I'm looking forward to get a Digital Tv Tuner USB from Toshiba adapter.

  HTTP://UK.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/INDIVIDUAL_OPTIONS_PAGE.JSP?SERVICE=UK&ACTION=SHOW _ATTRIBUTES & OPTION_ID = 109331

  And I have 2 questions about this article on Qomsio:

  1 MCE (version 2004 on E10) will be able to use this DVB - T Tuner for me to record digital programs in MCE?

  2 "Intervideo WinDVD Creator 2 Platinum for Toshiba" (comes with E10) will be able to see the PX1211E-1TVD so?

  If not, what software could be used to record DVB - T programs?
  Later,.

  Alcahest

  Hi Alex

  You will be very happy if someone can give you a precise answer to your questions. I didn't see this before, but it will be interesting to know if it works with my Tecra laptop.

  If seek you information please let me know how it works. Thank you!

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Question about video drivers Satellite P100-257

  Hello.
  Question about video driver. Version 14.25... Works (tells... 945 GM chipset); 14.27--works but with ocassional problems (tells... 945GM/GU); version 14,29... (said 945GM/GU) - does not work at all - black screen, but you can hear sounds which tells that XP does all right.

  Why that? And what is GU? Pilot info says it is for 945GM, pilot says he's for 945GM/GU.

  All kinds of three said they are for Mobile Intel 945 GM Express chipset. Who initially my machine have said there. In section "video card" my machine said no Intel - some Calg... - don't remember exactly the name.
  Thank you very much.

  Hello

  As much as I know Satellite P100-257 supports the graphics card Mobile Intel 945GM. The code name of Intel's GM Calistoga
  This is not the same thing as the chipset Intel 945GM/GU. Both are different and so the graphics drivers are not totally compatible!

  The Intel page provides some interesting info on these chipsets:
  Mobile Intel Express Chipset 945GM

  Unfortunately, I have not found anything on the 945GM/GU.

• Hello Mr President! I have a few questions about the Word report generation please.1.How can I add a border to a page in word? 2. How can I add gridlines to a table generated related word?. Can 3. how I add a border to a picture of the Word report?. Thank

  Hello!

  Sir, I have a few questions about generating word reports using (C language in labwindows) please.

  1. How can I add a border to a page in word?

  2. How do I add border lines and grid to a table generated in Word report (not "cvi control table"inserted from gui, I wonder about the table generated in Word report)?

  3. How can I fill a table cell of report word with the data type other than 'character '.

  And sir a question on the use of the timer in labwindows cvi please.

  Sir, I'm trying to set a time minimum interval timer to 1millisecond (0.001 s), that I have set, timer cares about the interval set by me he only meets the minimum default time interval which is, I think as 10milliseconds (I'm using windows xp service Pack 3 version 2002).

  Concerning

  Imran

  Pakistan

  Have you read this statement ? It explains how to set the registry value:

  If the REG_SZ useDefaultTimer does not already exist, you must create it under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\CVI Run-Time Engine\cvirte. "" This can be done navigate to the appropriate folder, and then click Edit "New" string value. Then, click on means the name of the new value created, select Rename, and then specify useDefaultTimer as the name. Finally, double click on the name and specify the value True or False.