Question about version of CS5 upgrade

Hello world

I have Adobe CS3 and want to upgrade to CS5.  I noticed that Staples sell version CS5 upgrade for a decent price.

But it does not specify if it's for CS4 or CS3/CS2.  I contacted them, but they said that they are both the same... but I don't know if I believe them.

Is the version upgrade to CS4 and CS3/CS2 the same thing in retail? (that is, you can enter a serial number CS4, CS3 and CS2 for the same disk or are there separate products for each previous version - i.e. CS4 update is different than a CS3 upgrade?)

I noticed that when you buy Adobe Store or even other sites like Newegg, they are marked as 'CS4 Upgrade' and ' CS3/CS2 Upgrade', but on his single 'Upgrade' Staples and they told me it "working probably for CS3 as well.

Link to the product on the Staples site: http://www.staples.ca/ENG/Catalog/cat_sku.asp?webid=885938 & CatIds = & AffixedCode = WW

Your help is greatly appeciated!

Thank you!

J

What product in the suite you upgrade? The price, as you note is different from CS2/CS3 from CS4.

While prices will vary a bit, they will be very close to price all wherever you buy. If there is no indication on the site of the staple food and then go to the Adobe store and check prices here. For example, CS5 Design Premium CS4 is $ 599. For CS3/CS2 to CS5 it is $ 799.

If you see that the price is $ 579, you can be sure it's a CS4 CS5 update. If it's $775, she'll be the CS2/CS3 upgrade.

CS4 CS5 update won't work for you.

Bob

Tags: Creative Suites

Similar Questions

  • question about version nfr

    Hello

    a question about the nfr vshere 4.1 version

    If a version nfr vshere 4.1

    I do use it for my client (under a free license)?

    Thank you, Alberto

    I do use it for my client (under a free license)?

    In accordance with article KB as cloudzone mentioned, it is NOT allowed!

    Article:

    Any such software NFR copies may not be copied, resold, hosted or distributed to third parties.

    André

  • Questions about Satellite 1115-S103 upgrade

    Hello
    There are Toshiba Satellite 1115-S103, configuration Intel Celeron 1500 256 MB 20 GB M6 ATI DVD - ROM 16MB 14.1 "1024 x 768. I want to do the upgrade and I have a few questions:
    1. What more powerful CPU could be placed in the laptop?
    2. What is the largest size of RAM?
    3. What is the largest capacity of the hard drive?
    4 could replace the graphics card with a newer version?
    5. an internal Wi - Fi adapter could be placed in the laptop (not to mention that in the PCMCIA slot)?

    Looking forward for your reply. Best regards.

    Hello

    Don't expect too much! The laptop upgrades are limited and it is not easy or especially not possible to upgrade the laptop parts.
    The Sat 1115-103 seems to be a mobile American.

    1.) usually the CU upgrade is not possible. Seems that you can only use the Intel Mobile Celeron up to 1,8 GHz

    (2.) the RAM can be upgraded up to 512 MB (2 x 256 MB). You can use the SODIMM, DDR PC2100 modules as Kingston KTT3614/256 256 MB PC2100 DDR SDRAM module

    (3.) the laptop came with 20 GB. Am I wrong? In my opinion, you can use the 2.5 ", 9.5 mm hard drives up to 40 GB.

    4.) graphics card cannot be replaced. It is fixed on the Board!

    5.) I am not 100% sure if the laptop supports a Wlan minPCI card slot but worth case you can use a USB WiFi key to connect the laptop to the Wlan.

  • A few questions about the Qosmio F20 upgrade

    First of all, my English is not very good!

    I want to improve my laptop. I want a new graphics card and a new processor.
    My questions are what standard mxm has my cell phone (I have a GO6600)? Where can I buy a new one?
    The cpu can be improved? If so what CPU? Can be installed on a dual core?

    -Does anyone know how the open a Qosmio f20.
    I opened all the screws on the site but I can not open it... What should I do I open Notepad?

    My laptop dvd drive is very strong when I play games... it works all the time and I have made many drowning.
    Do you know how to reduce noise?

    thx for the answers

    Hardware upgrade on laptops is not comparable with the workstations where you can upgrade almost everything. Mainly on laptops, you can improve RAM, WLAN, HARD drive or maybe BT but all that s.

    Update graphics card is definitely not possible because the graphics card is part of the motherboard. Update CPU's might be possible, but certainly not recommendable. The construction of any material is designed by technicians and configured to provide optimal use. If optimal use, you understand very good performance but without the possibility to destroy the material. The common problem on mobile computing is heat and how to cool the hardware components.

    The best graphics card and CPU using the material temperature is much higher and the result can be permanent running fan or just property damage. If you think about all this stuff, I hope you understand that this type of upgrade can be very risky.

    If you need to better and more powerful portable computer the best option is to sell your old and buy newer with the best hardware configuration.

  • Questions about versions

    On-site I JDeveloper 11.1.1.5 with patch 12399372 and when I go to 'about' I see this:
    ADF Business Components     11.1.1.60.13
    Java(TM) Platform     1.6.0_24
    Oracle IDE          11.1.1.5.37.60.13
    Versioning Support     11.1.1.5.37.60.13
    Now in the sense that we run in Bug 13058228 : CONVERTEREXCEPTION: not supported SIMPLESELECTMANYRENDERER of MODEL which is weird, because it is reported only for R2 (perhaps based bug 12676484 shows more but I'm not allowed to see)
    I don't know what TERM ADF we run it, it's a WLS 10.3.5 installation so that they could not have installed ADF 11R2 accidentally, could they do it?

    I found this blog http://tompeez.wordpress.com/2012/02/05/adf-how-to-find-out-which-adf-version-is-installed-on-a-manged-weblogic-server/ and I'm going to try to have this Web service installed on the server of the acceptance.

    However, I have a few questions:
    -Is a production server running ADF 11.1.1.5 need patch 12399372 ? (I did not)
    -The webservice 11.1.1.60.13 on my local WLS says it's still officially 11.1.1.5 right? not 11.1.1.6?
    n ' anyone can access to bug 12676484 and tell me that the other versions of 11.1.2.0.0 have this bug?

    Thanks for your help!

    "I'm not sure what TERM ADF we run it, it's a WLS 10.3.5 installation so that they could not have installed ADF 11R2 accidentally, could they do it?

    GR 11, 2 can run on servers time 10.3.5 and 10.3.6 then Yes, it is possible.

    ' Is a production server running ADF 11.1.1.5 need patch 12399372 ? (I didn't) »

    Not that I know of. But you may need the bug fix. Confirm with Oracle Support.

    "The webservice 11.1.1.60.13 on my local WLS says it's still officially 11.1.1.5 right? not 11.1.1.6? »

    WebService? Do you mean the version of the component "ADF business components ' box you listed in your message about? If yes the key to version number is the last 4 digits that correspond with the JDev 11.1.1.5.0 build number 6013.

    "can anyone access bug 12676484 and tell me that the other versions of 11.1.2.0.0 have this bug?

    The system of bugs does not tell us this, should be so each version to test. However what I can tell you there is a backport fix for 11.1.1.6.0 which means that the bug was present at least that version. The fact this 12399372 patch for bug 12676484 tells us that it is too 11.1.1.5.0 I guess.

    Try to figure out the bug, patch and version numbers are a pretty tedious task for people on this forum to keep track. May I suggest that apply you for taking in charge because that's what they are paid to do.

    CM.

  • Question about versions of DNG format?

    Hello

    I imported all my. Images RAW of Nikon NEF with Lightroom and I started to convert them to DNG, as seems recommended (and I want to get rid of the sidecar files when saving metadata to the files).

    However, there is an option I wonder about: "compatibility". What does this option, in practice? I have to upgrade my DNG files when new versions of the plugin Camera Raw is out? Should what compatibility option I choose for conversions again?

    Thanks in advance!

    Jonas.555333 wrote:

    Ok. What about later versions of Lightroom, you I have to upgrade all previous DNG files to the latest version then?

    You won't have to update existing images as they would not add new rendering algorithms that may arise in the future. However, all the images will change in a version containing the new rendering algorithms would be better recorded with appropriate option.

  • Tecra 8000: Question about the possibility of upgrade

    I have a tecra 8000 with a pentium 2 300 mhz processor and I was wondering if it would be up to class? any help would be appreciated thanks.

    Hello

    Well, in general it is not possible to upgrade the CPU because the cpu is fixed and soldered on the motherboard. But sometimes the CPU is only mated. I'm not sure about this device, but as far as I know, this device was shipped with Pentium II 400 233 MHz, 333 MHz and 400 MHz Dixon.
    But if you want to upgrade the CPU to change many other parts because the plu processor produce more heat and this process can cause overheating problems.
    So if you want you can request the service of Toshiba for details.

  • Question about Diplay driver and upgrade - Satellite 5200 903 RAM

    Hello

    I ve got an old book of 5200-903 and I m lovin it. I installed the driver Nvidia Support Toshiba Download Page. But I can´t find any display driver again? I m only using the standard Windows Plug and Play Driver? Has anyone found a driver for the display for best results?

    Another question: I want to upgrade my RAM. For now I m using 2 x 256 MB DDR 266 Mhz CL 2.5. What is the maximum that supports the book? A tested person faster DDR RAM? As 333 MHz RAM?

    Thank you for having responded

    > I installed the driver Nvidia Support Toshiba Download Page. But I can´t find any display driver again?

    Sorry but I don't understand what's your problem now. On the Toshiba support page you can find the driver NVIDIA V 43.36 for WXP (listed for Satellite 5200 903). Am I wrong? If you have installed this driver for the graphics card must be properly recognized and listed in the Device Manager.

    So now, I have to ask you once again: what exactly is the problem with display driver?

    On RAM:
    Your laptop can handle with max of 1024 MB. You can use the module 2 x 512 MB. Module of 512 MB compatible a part PA3164U - 1 M 51 number.

    Good bye

  • Question about version first submit 1.0 and 1.1, with some corrections?

    Hello

    First of all excuse me if this question has already been answered here.

    If my app (version 1.0) is rejected due some bugs, what's the next step?  Fix it and submit the 1.1 version or do it with 1.0? In my case I presented version 1.1 because I couldn't do it with 1.0 as the application was already signed.

    Thank you

    You can not re - sign with the same version, so change it demanded. There is no need to go back to 1.1, however, if you do not want. There is up to four items to the version number. My last example is 1.0.4.1261... You could make 1.0.0.1 if you wanted.

  • Question about VMware Tools when upgrading of vSphere 5.1 to 5.5

    We are the vSphere upgrade 5.1 to 5.5. We have still a few virtual machines with obsolete tools VMware vSphere 4.  There problems upgrade to vSphere 5.5 and then upgrade VMware Tools on those virtual machines to the version 5.5?  Or should we upgrade VMware Tools version 5.1 first before doing the upgrade to vSphere 5.5? We need plan restarting downtime when upgrading to VMware Tools on those virtual machines and would rather not upgrade VMware Tools twice and planning two stops

    There is no problem, as vSphere ESXi 5.5 supports the VM running older versions of VMware Tools.

    This blog post explain this more in detail: is a vSphere VMware Tools upgrade required during the upgrade? VMware vSphere Blog - VMware Blogs

  • Question about reinstallion of CS5

    I recently formatted the hard drive and reinstalled Photoshop CS5; I bought CS6 upgrade, and now CS5 has a panel of Adobe telling me I left the 17 days of the trial.  I used the chat with Adobe and said to enter the serial number on the trial Panel and it did not work.

    What I would do.  I started with the total of the purchase of Photoshop 7 several years ago, now have CS, CS2, CS3, CS5 and CS6.  I want to continue to use CS5 and concerned it will cease in 17 days.

    Julius Olsen

    Open cs5, click Help > activate.

    You should have the possibility to enter your serial number for cs5.

    But if cs5 is an upgrade to cs3, you may be prompted for the cs3 series and the cs5 series.  read the prompt (s).

    Once cs5 is activated, the cs6 upgrade requests all series except the cs6 serial.

  • Question about Version target

    Two questions:

    In a version of the target, if you enter a number say 20,000 to the level parent, and I enter more than 20,000 then what is supposed to happen? Currently I have just install a target version and nothing happens, users can enter more than the value in the parent member. If I want to restrict the ability of the user to enter more that all that is in the parent, how can I do this?

    IF I want a change in the relative value to be distributed to children in THE REPORT I have current data in children, how to get there?

    "IF I want a change in the relative value to be distributed to children in THE REPORT I have current data in children, how to achieve that?

    Right-click on the parent account where you want to change the value, select adjust-> grid spread. Use the proportional option. Who takes care of the issue.

  • A few questions about the Portege R100 upgrade

    Hello

    I have a Toshiba Portege R100 of America with 768 MB of RAM, 40 GB HDD, DVD-ROM on the PCMCIA card. I want to renew the Windows XP Pro Notebook by updating the material.

    -How can I update a larger HARD drive?
    -What RAM should I update?
    -Can I upgrade the processor?

    Thank you for your help.

    holger112

    Hello

    You cannot switch the processor!

    You can upgrade the HD, but because it is an interface 1.8 "HD with an ide (50 pin ATA) the best you can find is a 60 GB HD (Toshiba MK6006GAH 60 GB) you can find them on ebay for a reasonable price

    You can easily switch from memory with a module 1 GB pc2700-dimm ddr1 (like kingston or corsair) in replacement of the module of 512 MB to a maximum of 1.2 GB.

    You can buy them everywhere

    Also note:

    install XP on a R100 is not very easy, but you can find lots of information on this forum, as here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232

    success

  • Satellite P10: Question about the limits of upgrade of RAM and HARD drive

    What are the limits to upgrade my laptop Satellite P10? Currently, I use 1 GB of RAM (2 x 512) and I still have the original 60 GB 4200 RPM HARD drive. I'm mainly interested in upgrading my hard drive to at least get a 7200 RPM 100 GB disc. Better would be one of the ones 24 hours server as Hitachi HTE721010G9AT00, I have just turned off my computer. Which one to take and are there limits (BIOS) (keeping in mind that there will be 200 and even the 250 GB drives next year)?

    RAM: should I put two 200pin SO-DIMM 333 or 533 or should not change at all as it works very well and stabil now?

    Hello

    In my eyes you should follow the guidance of Toshiba line and must use the memory modules that are recommended in the user guide. But if you can also try to test with 400 Mhz or 533 Mhz. I think that each dealer notebook or memory could do that.

    I think the BIOS might be able to handle the hard drive with capacity of 30 GB / 40 GB / 60 GB / 80 GB, Bus Master IDE with ultra DMA 100 synchronous
    In my opinion the BIOS does not recognize the larger HARD drive.

  • Questions about the video card upgrade

    I have a t HPE-310 (CTO) with an Intel i7 processor and an AMD/ATI HD5450 graphics card.

    http://h10025.www1.HP.com/ewfrf/wc/product?product=4242292&CC=CA&DLC=en&LC=en&JumpID=reg_R1002_USEN _...

    I want to upgrade the graphics card to better manage the Guild Wars 2.

    I am looking to buy an AMD/ATI HD6850 and a CS600 Corsair for power.

    Is this a reasonable combination for my computer? Are there other combinations you would sugget instead?

    Also, there are other problems, I need to be careful?

    SteveW44,

    If you meant the CX600 Corsair, I anticipate no problems. Enjoy!

Maybe you are looking for