question aunetsend/reception

Similar Questions

• Problem with the question of the rejection more control of reception

  Hi friends,
  
  IM using oracle 11i. Ive set the Action on the control of reception = Reject in Delivery Options so that the extra amount can be received. Ive created a new purchase order (PO) with quantity 20 and received against this IN. 21 quantity. Tolerance is set to 0. It shows just a warning, which is normal for Action = warning. He needs to stop with an error like im extra reception at amount of in. where can you check this problem?
  
  pls help me.
  
  Thank you
  LISAN

  Hi Matt,
  We don't think you have any question of configuration option to receive PO... However, we doubt the Po that you created... Could you please confirm what is the * "action message under more tolerance of the newly created PO shippment reception *, I think in your case, it was * 'Warning' instead of"Reject"* as your option to receive PO..."

  Please test the whole senario with a new PO... Please follow below step...

  (* 1)--> Options configuration--> configured on the control of reception reception... Established tolerance: 0%, Action: reject... *.

  (* 2) create a standard IN.--> click shippments (this will open Shippments form) + button +--> click controls receiving + (this will open Receiving Controls form) +--> check the value default slot on tolerance reception block... If you see Action like: warning, then change to "reject"... Save & approve the PO... *

  (* 3) will receive the newly created in the form of expected receipt PO--> revenue--> query--> receipt lines pass... Instead of 20-21 set as amount, try to save... It will reject the reception with appropriate... error message *... Hope this will help...

  Please test and confirm...

  Kind regards
  S.P DASH

  Published by: spdash12 on November 9, 2009 15:38

• Poor iPhone reception 7 more

  Hello

  I've recently updated to iPhone Plus 7 and I get horrible reception, people cannot hear me or I sound muffled, (I had no problem on my 4S or 6 more).  My provider is the same, Bell Mobility to the Canada and I use the phone I did the others, there is also no case on the phone.  Sometimes, I noticed the signal bars in every way, I know that this isn't an exact science, but they've been very erratic.  For the most part, I hear I'm talking about, but people have a hard time hearing me, everyone has noticed poor call on their iPhone is received 7 more or have a fix for this problem?

  Thank you

  JD

  Hi, jdtouchie!

  Thank you for using communities in support of Apple and congratulations on your new iPhone 7 more! I understand the basis on your post that you had some problems with the service company and audio quality for calls from the establishment. I know how it is important for your new iPhone to work as expected, and I'm happy to help you!

  Since others are having some difficulty to agree on calls, I would recommend going through the following article.

  Get help with microphones on your iPhone, iPad or iPod touch

  To answer any question you have with the service, I recommend the article below.

  If you cannot connect to a cellular network or cellular data

  Have a great day!

• Yet WT8 - WiFi signal reception problem

  Hello
  I hope someone could help me!

  I bought a Tablet still 8 a few weeks ago and just after the first start, I found a problem in the reception of the wireless signal.

  When she acquires the signal, there's always between 1 or 2 marks in the indication of wireless in Windows 8.
  I tried initially change the card wifi settings (which is disabling the power saving mode) but without any improvement.

  I compared the tablet with another identical of my colleague and in the same position as his Tablet acquired the signal with no problems, then the mine has not signal.

  So I decided to sent the tablet in support, but they have not found any problem.
  They performed a restore of the system and then sent to me.

  When I restarted, I found the same problem as before.

  I have already installed the latest available Council broadcom driver, available here on the website, but also this way nothing has changed.

  Y at - it a driver update or the setting that I can do to fix this?
  or it's a HW question?

  Thank you for your help

  Hello

  Check if the WLan option in windows power management (using Central) has been defined in the performance.

  You should also go to Device Manager-> card WLan-> properties-> Advanced tab
  Here you will find a few options that could improve the performance of Wlan.

• No problem. What is the meaning of the spinner counterclockwise in tab, spinner clockwise vs? Transmission and reception?

  No problem, but a question: what is the meaning of the Pan anti-clockwise in the tab, vs the arrow to the right? Is it in the opposite direction when sending to the cloud and to the right at the reception of the Cloud?

  Thank you

  I think it's this way:
  
  needles: rising site in domain name registration and to establish a connection to the site.
  
  clockwise: actually receive information from a site and building Web page

• Satellite Pro U400 - micro reception problem after installing xp sp3

  I had Vista, then I recently installed windows XP SP3 from scratch (not downgraded). I downloaded the latest drivers from Toshiba and install. Now, I have a problem with the microphone. Speakers audio playback is fine, but the built-in microphone reception level is very low and often unrecognizable. I use a voip program. In Vista, micro worked better.

  Now in Windows XP Home edition, I told myself that they cannot hear me or my voice is very weak and difficult to recognize. I also tried to sound recorder in windows. My voice is as if I am talking about ten meters.
  I have an external microphone, so I can't say if line microphone. works well.

  In messages previous people mention a fix for xp download his questions but I'm not sure if applies to my situation.

  Thank you

  Erdem

  Hello Erdem

  As I see you have CD/DVD for Windows XP SP3 home edition recovery facilities. Everything worked well with the original recovery image? I have way is there a reason why you installed the new driver?
  Were you informed of the new drivers (Tempro) somehow?

  You have installed the drivers who exactly?
  What Satellite Pro U400 you (U400-xxx)?

• A few questions about G10

  Hello, just bought the qosmio g10.

  Here are my horses/questions

  1. the sound during DVD playback is not getting a lot. Can't handle the bass too well. low voice is hard to hear. is there a good setting for this in the virtual surround from toshiba. currently have srs at 80% level, size speakers 250 Hz, trubass level at 10% and the level of discussion to 70%. I modified the default trubass 80% because the dialogue of the film was unhearable to 80%. It's much better now, but I think it could be better. advice on this setting or other settings, are highly appreciated. I don't think it's HW, since the evolution of the sound settings were much better.

  2 region unzoning. Not sure if this is a good place to ask this question, but does anyone have any advice? We can personally discuss commercial e-mail.

  3. quality of the image for the DVD and tv. The picture quality is as good as a tube tv or is it normal that when you watch DVDs, the picture quality is a bit weak? I can understand for tv on MCE that the image is not great due to the reception of cable quality. Although it's not great.

  4. I can't get my infra red to work. It is available on the g10? should be customized to have infra-red on laptops now. You have to light it some how. Where? P.S. not MCE infra-red, which works very well.

  Sorry for the long post, but any tips are appreciated. Cheers.

  Hello

  1. I am also owner of laptop Qosmio G10, and in my opinion small Harman/kardon speakers are great. I tested the sound quality with different kind of music, watching DVDs and listening to the radio on the internet. So far, I have no complaints. Toshiba virtual sound tool is very good and allow the user to define the individual taste of sound quality.

  I noticed that all the options have a strong influence on the sound quality and it is possible to set the quality sound for each type of music.

  My configuration is:
  Size of the speaker 200 Hz
  TruBass level 75%
  UPDATE level 76%

  2. as you know you can change the region 5 times code and the last of them will be by default and cannot be changed

  3. I agree with you that the quality of the image depends on the quality of cable reception. DVD playback quality is excellent. In my case the TV, picture quality is not so good but good enough

  4. If you want to say about the IrDA port, then I have some bad news. IrDA is not available for this device. If there is no entry in the Device Manager the unit has no IrDA. I checked the manuals of s, and I found no info that should be infrared on this machine.

  Good luck with your new toy!

• Qosmio G30-163: bad reception TV using the media library

  Very fuzzy TV reception gives my Qosmio G30-163. I use the Saudi Arabia country setting in the media library. I tried to connect to another air outlet that I know my TV works with the classic but that was still fuzzy, so is not the antenna for sure Jack. Any help appreciated.
  Thank you and best regards.

  Have you chosen the right settings to PAL/NTSC?
  Please check this box.

  For the most part these incorrect settings are responsible for bad reception of the TV signal.

  One question;
  Have you tried to update the TV tuner driver? Should do!

• Use of NI-CAN Self reception?

  Question, I CAN poll of loop installation where to look for incoming frames by configuring the VI C-Attr to read entries in the meantime? My quesiton is, I want to see the frames I write on the NI-CAN when the other device CAN respond back with a frame. I know that it works with the mode of reception of course, but I'm not sure where to set up using a property node. If I set using node Attr-C, I can't use it to monitor the incoming frames more. Where to configure the parameter Self reception before you write it somewhere? I need the C-Atrr configured to control incoming frames so could someone please point me to the right direction on the proper use to have received two self and read entries in the expectation of setting configured in my polling station in a loop so I can monitor outgoing frames as well?

  Thank you...

  If you read the help file, you will see that he described here:

  Home auto?

  For the CAN, this specifies to echo frames transmitted successfully in the queue for reading the CAN Network Interface and/or CAN objects (series 2 only). Each reception occurs as if the frame was received from another device CAN.

  For the free reception work correctly, another device CAN must receive and acknowledge each issue. If a transmitted frame is not properly recognized, it is not included in the playback queue.

  Communication has to be stopped to set this attribute. Use False Start on Open with ncConfigCANNet.vi, set the attribute, then use ncAction.vi to start the communication.

  0 (FALSE) disables auto mode (by default). Transmitted frames do not appear in the queues of reading.

  1 mode of reception of Self of enables (TRUE). Transmitted frames appear in the queues of reading as if they have been received from another camera CAN.

  I have underlinied the important text.

• Aspire R7 questions

  Got the same problem that others have reported... a low wifi reception. All USB ports are busy, but the port for SD card isn't, so want to ask if a certain SD WIFI would receive better?

  Driver Acer downloads suck... had to try another driver models´ for windows 7 to get USB3 and bluetooth works after installing windows 7. Users are supposed to be stuck with 8? It s even not a true operating system, it's just time to make money and put tech to work with all the problems he has. After installing W7 Windows experience index went from 5.8/10 to 7.1/7.9

  And Ezel sensor does not work in W7.

  Review: Best travel PC for games (w. i7 and geforce) again this year with the troubled wifi and wireless mouse (could not operate) recommend thismouse instead.

  Maybe another version without built-in bluetooth, touchpad, or wifi but with a bluetooth/wifi sd card instead. And Ezel sensor for W7 + some Board games, specially designed for the possibility of the table.

  Just buy the R7 today for my daughter to take to College in a week.  She spent an hour playing around with all the features and how it worked until she tried to download some items (netflix, youtube, etc.) love anything would work because of the low download speeds.  All this bought at Best Buy and while we were looking in the store, on that I read wifi critically low speeds being a problem and Acer did not address the problem and were not all new drivers and no solution.  I show review at the commercial and they pull up a speed test right in the store and said that he did not know that they had solved the problem.  My daughter loved the concept of the flexibility of the screen.  At the moment she is very disappointed in Acer and Best Buy to do. This is our first experience with Acer and we didn't have to go to a brand, we have tried before.  Now it seems that we should have paid attention to our doubts.  We will probably be back to Best Buy and go with a more reliable brand... be nice something about a product in the end if it does not work just nothing further questions.  We are extremely disappointed.

• HP Officejet 4630: Backup Fax reception

  Hello

  The instructions for my HP Officejet 4630 to turn on the backup Fax reception so I can print the faxes missed memory.  I went through all the fax settings and sub-menus, but impossible to find the backup Fax reception.  Can someone tell me where I can turn that on or off?  Also, if I switch on it and there is an error, when received, do not fax, I'll be able to print the fax failed memory (if I can find where to turn on the Backup Fax reception)?

  Thank you!

  Hi Tmactag,

  Welcome to the HP Forums!

  I noticed that you are trying to find the option to print the faxes missed the memory with your HP Officejet 4630. I am pleased to see that for you!

  According to page 50 of the User Guidefor your printer, it states:

  Reprint of faxes received from memory

  Faxes received, which are not printed, are stored in the memory.

  NOTE: After that the memory is full, the printer cannot receive the fax again until you print or erase memory faxes. You can also delete the faxes in memory for purposes of confidentiality or security. According to the sizes of the faxes in memory, you can reprint up to eight more recently printed faxes, if they are still in memory. For example, you will need to re - print your faxes if you have lost the copy of your last draw.

  To reprint the faxes in memory from the printer control panel

  1. make sure you have loaded paper in the main tray. For more information, see loading page 28.

  2. starting at the homescreen on the printer screen, press up and down to select Fax, and then
  Press OK.

  3. Select settings, and then click missed reprint faxes.

  Faxes are displayed in the reverse order from which they were received with the most recent
  received the fax first, and so on.

  4. Select the fax you want to print, and then select print.

  5. If you want to stop the reprint of the fax, click Cancel.

  Hope that answers your question and have a nice day!

  "Please click the Thumbs up icon below to thank me for having responded."

• U310 under Windows 8: a few questions

  G ' Day,.

  Lenovo U310, i5, improved W7 to W8

  Two weeks ago, I upgraded my old U310 of three months of W7 to W8, and I met some problems unresolved since.

  See the Lenovo support seems like all vacationing maybe some of you forum-visitors can answer one or two questions.

  1. Battery life has decreased considerably, from 5 to 6 hours up to 3.5 hrs max
  2. Same story with Wifi reception. When I move the router over 2 meters, I have to swich for reception by cable; do not know if W8 caused this or just a network card Broadcom lame (I noticed problems of wifi on older U310 - i3 - versions)
  3. What is the function of CAPOSD?
  4. Smart Update - I expected a "main interface be published" (help function) but still nothing to do, just the charges residents and consumers of processing time

  Thanks in advance and best regards,

  Jim

  Honestly I suggest you perform a clean installation. Update never do anything good for me.

  Also, try a US version or en - HK from the support page. I have all my drivers from there, and they work like a charm.

• Direct Mail 0 error 80004005 x prevents the reception of e-mail. What is the solution?

  Direct Mail 0 error 80004005 x prevents the reception of e-mail. What is the solution?

  Hello

  The question you have posted is related to Windows Live mail. This is why it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://windowslivehelp.com/forums.aspx?ProductID=15

  http://www.windowslivehelp.com/

• Update blackBerry OS Z30 10.3.1 - questions and question about how do to uninstall / restoration

  Hello.

  From the start, I try to stay calm and professional, objective. Pretty sure I missed the mark, but then, read on...

  I'm having some problems with the OS 10.3.1 update. Before someone says to the research councils, I. For hours. On various Internet sites. I would appreciate (but I'm not optimistic for) an official response from BlackBerry.

  1. I use a Z30. Carrier is Rogers Wireless (Canada) updates are off. Yet, incredibly, the update came down in any case, when I was driving, didn't know until I got home. Device to reboot and now 10.3.1xxxx is on my smartphone.

  QUESTIONS:

  1. the screen turns off. Whenever I wake up, the display is enlarged. I have to move and move and gesture to get the display to fit the screen, so I can't unlock the phone.

  2. the home screen is not editable and is the default value. Now I have to drag to the hub or my applications. Twice = 1/2 labour productivity.

  3. the assistants touted what, exactly? As far as I know is when I call via voice Bluetooth headset, the call would be (75% of the time) be done. The other 25% of the time, I tell him 'Call MOM Home' is not the same thing as "search battery charge. Yes, my bluetooth is a very expensive, side that has no problems of recognition with another device. Now, the vocal part (Assistant?) does not ALL calls. At best, it offers me suggestions, usually not related (Linda <> Tom) and wasting my time reading on several TELEPHONE NUMBERS. Good grief, if I knew that the darn phone number, I just say, call (phone number). It would be faster than the sitting through it all. In otherwise, voice Assistant something doesn't do much for me. I put it, as far as I know, to do the minimum, not interact with everything on my phone.

  4. Although the new camera app now (finally!) makes the colors more or less correctly, whereas before everything was tinged blue, I'm not a fan of the new positioning of the controls. It's ridiculous to put the video button next to the "Take a photo" button. The touch sensitivity is therefore, that I find myself video recording rather than take a picture wanted - and the time is lost. I really miss being able to touch the screen to take a photo. Now I need to aim a small dot at the bottom. If I wanted an iPhone, I would have bought an iPhone!

  5 more at the front of the camera, it is now difficult to take pictures. As in, I touch the icon to bring up the list of photos, and the last shot never appears. I have to slide to find. And in a different direction now.

  6. in the hub, in particular, the "select multiple" used to be in the middle of the menu. Now I have to scroll down to find and activate it.

  7. What is with the battery drain honking? More DIY required on my part to get it back to waiting for 4 days, that I used to enjoy?

  LACK OF UPDATED FEATURES:

  1. I was really hoping that this last updated with the NUMBER of the entry of the phone display. As job 1, 2 work, etc. I find it helpful to assign the direct number always as job 1, then toll-free as job 2, reception work 3, home knit 4, and so on. Then it is easy to use (or was) to call the number I want without knowing what really is the number of votes. I was hoping also that the update which would therefore eliminate offensive message 'next time, just say call xxxxx Mobile 2' or something else. I'm bloody well would be if there was anything in contacts to display the sequence of numbers.

  2 calendar. Seriously, why can't set a reminder for somewhere between 3 and 7 days? I'm so tired of defining a day (7-3), making the calculation in my head to work around weekends or other events) and then having to update the reminder when I get to the range of BlackBerry - approved 3 days. Other smart phones allow a custom setting. I would also ask, put first the custom reminder. We do not do scroll all the way down to find!

  3. I would like to put my icons used on the fricking HOME SCREEN! I don't like the cutesy pictures. I'm trying to do my job more quickly and easily as possible.

  4. fix the darn voice control mechanism. I bought expensive pieces of Bluetooth. All I want to do is voice component. That's all.

  5. get some control over the spelling. There is no way to change the words that are "learned" through the monitoring of its use.

  6. enough with the U.S. - marketing. Mountain time is Mountain time. Not US - MST. I'm not picking up something like that, I don't like that who commits an offence. He is as stupid as the settting (like Apple) zones in the "Calgary, Alberta." I do not live in Calgary. I don't live in the GENERIC Mountain time zone.

  7. taking the floor, I also speak English. Not American English U.S. - spelling. How about giving some love to the Canada

  8. give me the option to restore the update. Or at least choose what parts I want.

  9 extend the supported file formats. At this stage, I can only load documents on my smartphone if they are Adobe or Microsoft Office. Here's the thing - I operates in the universe of Corel WordPerfect. If the Z30 is limited in what I can / can not do with it. Why the hell can't I just copy my FILES to my phone? Even if I can't change them, I can use the chip memory 64 GB huge like a flash drive to take my files with me when I travel. I don't always take a computer... sometimes I use which is destined. More have them on the phone SHOULD allow me to email them or send in other ways... whether or not BlackBerry to read.

  ===================

  REQUEST FOR ASSISTANCE:

  Best - out an immediate UPDATE to solve these problems and to add the features I pointed out above. I'm probably not the only one faced with limitations integrated interface and the information screens.

  Please tell me how I can restore / uninstall / whether this "update".

  I shudder to think that the only solution is to backup, recovery, and then reload the Z30. Others have tried and failed.

  MORE VENTILATION;

  The only reason why I'm still on BlackBerry, it's that the questions and to some extent a difference of perspective in regard to the available phone / features are even less problematic on BB Z30, they're on ios or android platforms. Quite in my opinion. But then, I'm the one with a frustration level into the red zone.

  Thanks for reading. I'll be even more grateful for the resolution of some.

  Cinereo wrote:

  QUESTIONS:

  1. the screen turns off. Whenever I wake up, the display is enlarged. I have to move and move and gesture to get the display to fit the screen, so I can't unlock the phone.

  Go into your settings > accessibility > and disable Mode magnify.

  If you do this, I would like to read the rest of your post and see what I can help with... and Yes, staying quiet is a great feature... I understand that you might be frustrated.

• Question about the graphics driver

  Okay so just close a week ago my laptop (ASUS K55a) has decided to freeze on me while I look a a video on youtube (essentially what I normally do after obtaining of reception class at night). After that, however, I turn on my laptop after forcing him to stop and while the mouse was mobile, I couldn't click on anything whatsoever. Its as if it was running, it took, the incredibly long just at startup and when he did, loading everything and takes a lot of time.  (I rebooted once a couple and even started in safe mode, nothing seemed to work)

  So the next day I decide the best option here is to reformat because I really can't do anything else to my knowledge base. After reformatting all, it seems to work very well, but here's the problem: whenever I try to install the graphics driver updated on the computer I get this error:

  

  He had what appeared to be some kind of basic graphic driver, but after searching for the name of this driver, the solution was that this particular driver was related to corruption. (Also to try to get windows to update this basic driver, he would sit there for about 10 minutes then would proceed in a BSOD).

  -If I run dxdiag.exe it shows s/o under the view tab

  -Graphics Card allegedly inside: Intel HD Graphics 4000

  -J' tried installing the following but it says that my computer does not meet the minimum requirements:

  Intel® Graphics Media Accelerator Driver, Windows 7 * 64, Windows Vista * 64 (zip)

  Data sheet:

  If someone knows the question here please let me know if there is anything, I can do to solve this problem, thank you!

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  
  
  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.
  
  
  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.
  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)
  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
  The procedure:
  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy (compress)
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.
  Link to find out how to download below.
  http://www.WikiHow.com/use-SkyDrive
  To ensure the minidumps are enabled:
  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.
  Please also run MSinfo32 and download the output as well.
  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  System specs are extremely useful then please include everything you know.
  
  
  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  Troubleshooting of Windows/source here
  You can learn more about BSOD here
  You will learn how to test your memory ici
  An effective question gets help more quick read how here
  Pilot auditor-stalking a GIS behave driver here