Yet WT8 - WiFi signal reception problem

Similar Questions

• HP Notebook: Wifi Signal very low after the operating system upgrade

  I bought the HP Notebook of month couple back. Due to the corruption of the OS, I had to reinstall the OS. Now, I am faced with two or three weird thigs

  1 WiFi signal reception is very low. Even if I'm sitting next to the router, I can only 1 or 2 bars on 5

  2 AMD Radeon graphics card is not detected. How do I solve this?

  Model: 15-ac076tx

  Thank you

  The answer could be linked to the reason that you had to reistall the OS, why did you have to reinstall the OS?

  You can also try the following:

  1. install the driver for both the wireless adapter and the graphics cards from the hp Recovery Manager and restart

  (for Recovery Manager, and recover - hardware driver reinstallation - select Driver Manager research - install)

  2. If the Recovery Manager reinstallation does not try to download the same drivers from the hp support site www.support.hp.com and install it and try it.

  Hope this helps,

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• HP Pavilion G6 - no WiFi Signal - problem "Broadcom 4313GN.

  Hello

  My laptop (HP Pavilion G6, PN: QG846EAR #ABU) with Windows 7 Home Edition is to have through its WiFi connectivity problems. The WiFi hardware is recognized as "Broadcom 4313GN 1 x 1 adapter Wi - Fi 802.11b/g/n" by the Manager of devices but it cannot detect all autour WiFi signals. I tried deactivating and activating it by FN - F12. This action works, but does not affect the situation. Initially it was the driver version 5.100.82.82 as of the 20.05.2011.

  I found two new updated driver from Broadcom and HP sites, but none worked. (ver: 5.100.82.95 - date: 1.4.09 and worm: 5.100.82.139 - date8.5.2012)

  I restored default Windows 7 Home but this does not work either.

  I started with Fedora and Knoppix live CD but none managed to see any signal, even if the two detected the correct WiFi hardware.

  I have checked and then changed the values in the BIOS by default, but this did not help.

  When a WiFi USB is plugged in, the PC works fine.

  Under the battery, the WiFi device is referred to as "bcm94313hmgb".

  Any idea?

  Say hello to new mscag.

  Thus, one of the sons is not connected?  It's probably the cause of your problem.  Take a look at your notebook PC Maintenance and Service Guide.  Specifically, look at page 54, which deals with the removal of the WLAN card.  He says that there should be two wires to disconnect (main and auxiliary antennas).

  I can't say very much in the picture, but it seems that you should be able to reconnect the loose wire.  I suggest this thread connected and if this does not resolve the issue I would then contact HP support.

  HP to support an appeal to the United States / Canada you can call to the 1-800-474-6836.  If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.

  Let me know if plug this cable solves your problem.  Have a great rest of the day!

• Very weak WIFI signal on Satellite Pro L10

  Hello

  I have a Sat Pro L10 delivered without a mini pci wireless card so I bought and installed an and is equipped with an internal antenna behind the screen. When I'm in the same room as the router I have a brilliant connection but as soon as I leave the room I lose all together. The router is fine as the other people have no problem connecting to this. The card I bought made by Agere but is marked as Toshiba, I updated the driver to the most recent I could find which is June 2002.

  Any help on this would be greatly appreciated as I'm tired of dragging this wire around with me.

  Hello

  I think that there is not much to do. I think that the environment has a strong influence on the Wlan signal reception. It of the same question as yours.
  My brother uses the WiFi network at home and the signal is strong enough if it is in the same room but in other parts, the signal is very weak. But at home it can receive WiFi signals without any problem. The signal is strong, also if it is in different rooms

  I think that the walls of the room are the reason for the weakness of the signal.

  But you can see the Wlan card properties in Device Manager. There you can change some settings in the Advanced tab. For example, to disable energy saving, etc.

• Poor/little reliable Lenovo P500 wifi signal

  Recently, I bought my new Lenovo ideapad p500... and like most of the time. I dealt with some very unstable wireless connections with this machine. Another device, not more than 2 feet of distance and equidistant to the router, a full signal, yet my ideapad Lenovo P500 barely two bars.

  I know low wifi signal is the problem for the other known models and I was wondering if this model has also been victim of this problem. I become very angry due to the interruption of the connection, resulting in work stoppage, while everyone has full signal.

  Thank you!

  Cecilia

  
  

• WiFi signal is completely lost after update of Windows 8

  Hello

  My new Asus PC with Windows 8 and wifi works well until I did update of windows, after updating my wifi signal was completely gone, I made the sentence that tells me that my internet cable is not connected, he sees not my wifi in all more than shooting.

  I reset my computer and wifi still works, however, I am very concerned to make the necessary update yet as I need internet and I can't afford to keep downloading updates on and more.

  I'm not familiar with windows, as I've been with apple over the years, please help with this problem because I am completely at a loss as what to do next.

  I look forward eagerly for your help with my problem.

  Thank you

  I had this same problem. I have a PC HP, but the solution for yours should be similar. I downloaded the form from their Web site Intel wireless driver update, and it solved my problem.

  Here's what I did:

  1. Forehand app, open the 'search '.
  2. Select 'Settings' as the place of your search
  3. Search for 'Pilot' (without the quotes)
  4. Click on "Update device drivers"
  5. Scroll down to "network adapters."
  6. See if there is a Intel. Mine is called "Intel Centrino Wireless-N 2230 #2. Want to know what it's called.
  7. Google search (on another computer, or use a network cable to attach your PC physically) for all that your card has been called. I searched "intel centrino wireless-n 2230.
  8. Click on the result of intel.com. He expected to be the first, but it's the one you want.
  9. You will be at the product page. There is a bar on the side with a link called 'Information of Support' in there. Click on that.
  10. Click on "Intel PROSet Wireless software and drivers for Windows 8"
  11. There should be a bunch of links to download the software. You want the number of bits that correspond to your system. (32 bit systems / x 86 get the 32-bit software, 64 bits of the system gets 64-bit software)
  12. Once downloaded, run the software. If you have downloaded the driver on another computer, you need to transfer via on a USB stick or something before you install it.
  13. The software should do its thing and then ask to reboot. Do it.
  14. You should be good to go. Good luck, and I hope it helps.

• Why my MB Air decreases the wifi signal

  My 2012 13 "core i5 MacBook Air running different operating systems will remove the wifi signal and it is getting worse. someone at - it a reason why?

  How your MacBook Air running different OS version? However, the Wi - Fi signal fell to each version?

  This always was a problem or just started to happen? Up to now, what did you do to try to solve?

• GPS, Wifi and Bluetooth problems

  So I have an iPhone 6 running on IOS 9.3.4 and have had problems with the GPS and the strength of wifi connectivity and bluetooth for a while now.

  First of all, the GPS.  It does not work.  When I run the maps or google maps on my device and the input an address the app can give me a written plan, location, but will not show me on a map.  He'll start road to everywhere where I go and tell me to start position, for example, to the North on the road on that I am, but the arrow does not follow me and tell me when the turn or where I am.  Occasionally, he has a message of guidance down with a spinning wheel and then, after a few seconds, disappears.  I tried to reboot my device several times, I have reset the network setting, I reset all of the settings, I backed up my phone, reset it and recovered save him.  Nothing has worked.  I was at my local verizon store and received a 'new' (its definitely refurbished) phone and the problem persists on the new phone.  I reset the phone to factory setting without content, set up as a new phone and tried the cards again, thinking it might be a problem with the back to the top.  It still does not work.  I'm perplexed right now and do not know what to do/try.

  Second, wifi and bluetooth connectivity is terrible.  I can only receive a wireless signal so that in very close proximity with the router.  I tried to different houses/companies and it is the same question.  However, bluetooth is just as bad.  I use headphones wireless, and go to the gym/go for the route with them.  I used to be able to walk around the gym without my phone and have connected the headphones, but now I can't have my phone 2 feet of the appliance without the music being agitated (bad connection).  I'm really irritated that I cannot understand this point and that he can't seem to find a fixed solution online.

  If you have just updated to iOS 9.3.4, which I didn't even know still shone, so maybe it's a bug that comes with the update. However, your problems seem to follow a trend, you can not far from a source of connection and now a signal. It is perhaps because the necessary components for the Bluetooth, GPS and WiFi signal are damaged or defective. Have you dropped or spilled liquid on your iPhone recently?

• Airport express to extend my wifi signal

  I bought and set up the Airport express to extend a wifi signal in my house. I do not have an airport extreme as a base station - I thought I could use the express to extend the signal from my router/modem from verizon. Is this possible?

  Turned it "on" now, I don't see the express network as an option in my combo network - so assuming that it will seek to expand, what's the problem with it only shows not not in the drop-down list?

  The AirPort Express only wireless may extend over a network that is provided by another router from Apple.  As such, it cannot extend wireless signal router left 3rd.

  Another way of saying the same thing, it's that if you want to extend wireless network using a router from Apple, you will need two routers Apple.

  If you can connect the AirPort Express Terminal to your main router using a wired Ethernet cable connection, permanent, then the Express can be configured to provide additional coverage of wireless signal in this way.

• What can I do to make my wifi signal is getting better?

  What can I do to make my better wifi signal?

  The distance is the problem more obvious - there is a certain optimal range that the wireless signal can travel. If the network is covering an area larger than the router is able to transmit, or if there is a lot of corners for everyone and walls to penetrate, performance will take a hit. Interference is also a big problem, especially for those living in densely populated areas. Signals from other wireless networks and electronics can impact speeds, that can the physical obstacles, such as walls.

  You can always look at your router administrator interface to see how many devices are connected. Or use a network Analyzer to see if you have unknown machines on your network. If it is a network that is open, close it. Configure security - preference WPA2, WEP is not as strong and put in a password that is difficult for others to guess.

• given that I have installed 9.3.1 IOS wifi signal is weak or lost.

  given that I have installed 9.3.1 IOS wifi signal is weak or lost. I have an IPhone 6 64 GB. Help, please!

  General suggestions for Wi - Fi problems, maybe one of them will help you...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

• Satellite L50T-B-13U - WiFi / WLan question / problem

  Hi all

  I hope someone can point me in the direction of writing to solve a problem of wifi with my B. L50T OS is windows 10 set to update since 8.1 but at the moment where I never checked if the wifi worked on 8.1. The problem is that the laptop detects my modem Virgin 2g wifi signal but it is impossible to connect. It is not 5g or any wifi neighbors. I checked the drivers, updates them, uninstalled them and bought a new Wlan card but still no improvement. I tried to alsi an external usb wifi dongle but still the same problem. I was wondering if it was a problem with the 10 widows and looked at installing windows 7 but that seems an another headache.
  Thanks in advance for any suggestions

  Hi all

  I hope someone can point me in the direction of writing to solve a problem of wifi with my B. L50T OS is windows 10 set to update since 8.1 but at the moment where I never checked if the wifi worked on 8.1. The problem is that the laptop detects my modem Virgin 2g wifi signal but it is impossible to connect. It is not 5g or any wifi neighbors. I checked the drivers, updates them, uninstalled them and bought a new Wlan card but still no improvement. I tried to alsi an external usb wifi dongle but still the same problem. I was wondering if it was a problem with the 10 widows and looked at installing windows 7 but that seems an another headache.
  Thanks in advance for any suggestions

• HP 15-AF138AU: wifi signal

  Hello

  I used HP 15-138AU for 1 month, my wifi signal is not stable, that is, it increases, decreases, disconnects some time.

  a few times that even if I'm next to my router, it does not show same 1 point.

  "Broadcom BCM43142 802.11 bgn adapter Wi - Fi m2" is that the only suitable driver my laptop.

  "windows 7 ultimate 64 bit" is the operating system I was using.

  I hope you people will answer me a solution to this problem.

  Thank you

  PC

  Hi @prashanthchintu,

  Welcome to the HP Forum! This is a great site to find tips, suggestions, information, and what has helped other people.

  I understand that you have problems with your Wi - Fi connection. Please try these steps in a post by @Grand-tree Deku.

  Here is a list of steps that solve common problems with wireless connectivity.

  First of all, we have a step by step guide to guide you through the process of diagnosis here:
  Troubleshooting your wireless network and Internet access

  A second option is to try the following steps:
  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.
  
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.
  
  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

  Please let me know if this helped.

  If this solves the problem for you, please choose "acceptable Solution" to help others who may have the same problem. To say thank you for help, please click on the ""Thumbs Up Icon " below."

• Yet WT8-A-102 screen auto rotation after update not

  Yet WT8-A-102 screen auto rotation after update not
  I have re installed the drivers

  Now the Tablet does not start-> error - system thread unhandled exception

  The system Thread Exception BSOD error unhandled in Windows 8 arises especially due to incompatible or old graphics card drivers.

  I assume that you have installed drivers that were not compatible
  To solve this problem I recommend you choose the Windows repair procedure

  You should start the tablet in the menu boot device
  Press on and hold the flight button + and hold also the power button until the device turns on and the boot device selection menu appears.

  Now you should be able to choose the option of HARD drive recovery.
  Then choose troubleshooting and got advanced options
  Here, you should be able to repair the system automatically.

  Useful info:
  http://APS2.toshiba-tro.de/KB0/HTD4103K90000R01.htm