Question DGMGRL

Similar Questions

• Error in DGMGRL > see Configuring

  Primary database: open State

  First aid: read-only

  Second reserve: read-only.

  Now when I run see the DGMGRL command projection is as follows.

  DGMGRL > see Configuring

  Configuration - Dataguard_DGTEST

  Protection mode: MaxPerformance

  Databases:

  DG_P - primary

  Error: ORA-16810: multiple errors or warnings found for the database

  DG_D - physical of the standby database

  Error: ORA-12518: TNS:listener could not hand off client connection

  DG_H - physical of the standby database

  Error: ORA-12514: TNS:listener does not know now of immediate service

  d connect descriptor

  Fast-Start Failover: DISABLED

  The configuration status:

  ERROR

  Hi all, question deleted. The tns ping was fine and there was no problem with the earpiece or the tns. The value of the parameter initialization process was less. I discovered the alert in the alert log and it increased to 1000. Then I restarted the database and now it was working fine. Thank you.

• DGMGRL conversion

  
  Hello

  I have a 11.2.0.2 primary and Standby which I am currently managing using Sql more.

  Q1. Is there a guide step by step on how to convert using DGMGRL?

  Q2. I guess I can use my primary at Oracle DGMGRL, all expectations Oracle Home or even any other server on the same network that has an ORACLE_HOME with DGMGRL installed in it?

  Q3. I see the documentation Oracle also speaks a DG observer which must be installed on a separate platform from the primary and Standby. This observer has a particular executable in $ORACLE_HOME/bin?

  Q4. If I want to delete any instance of the control from DGMGRL, just set the DG_BROKER_START of the instance of FAKE?

  any help appreciated

  Jim

  Jim;

  I have my short notes on the installation program:

  http://www.Visi.com/~mseberg/data_guard/broker_setup_example.html

  On this "or yet another server on the same network that has an ORACLE_HOME with DGMGRL installed in it"

  No, it won't work with other servers that are not part of the installation of the DG.

  For question 3 observer is not required for broker and yes it has a different executable

  For question 4, see the security note Oracle remove broker.

  Best regards

  mseberg

• Basic question on the Data Guard environment

  Friends, please excuse me for this easy question because I am very new to the Dataguard technology, what will be ideal start-up and sequences of stop primary and standby db provided is the version of DB Oracle 11 g R2 and we also have active dataguard broker.
  
  Any help will be much appreciated.
  
  Thanks in advance.

  918868 wrote:
  Friends, please excuse me for this easy question because I am very new to the Dataguard technology, what will be ideal start-up and sequences of stop primary and standby db provided is the version of DB Oracle 11 g R2 and we also have active dataguard broker.

  Any help will be much appreciated.

  Thanks in advance.

  (1) standby: DGMGRL > SET STATE of MODIFICATION of DATABASE "Standby_DB_UNIQUE_NAME" = "APPLY-OFF."
  (2) primary: DGMGRL > EDIT DATABASE 'Standby_DB_UNIQUE_NAME' PROPERTY SET LogShipping = OFF;
  (3) standby: stop
  (4) primary stop.

  At startup:

  (1) primary starting
  (2) standby: start [if ADG], otherwise then starting in the State
  (3) primary: DGMGRL > EDIT DATABASE 'Standby_DB_UNIQUE_NAME' PROPERTY SET LogShipping = ON;

  No need to start MRP waiting, because whenever the broker started, MRP will be initiated.

  HTH.

  Published by: CKPT on February 22, 2013 15:18

• DGMGRL in Dataguard

  Hello
  
  I have two question about dataguard.
  
  (1) If an archivelog is missing in the primary database without account assignment in the database from backup, then what happens?
  (2) what is DGMGRL?
  
  Thank you...
  ASIT
  
  Published by: asitkmohanty on October 4, 2012 05:49

  (1) if archivelog is missing in the primary database without account assignment in the database from backup, then what happens?

  It is obvious that the standby database would go out of sync. If the archivelog is missing and you have the backup of it, then use this backup and restore and recover on the day before, so that it is in harmony.

  If you have no archive and you do not have the backup of the archives interrupted, you should use roll method forwards to get your sleep in sync. To do this, take a look at http://shivanandarao.wordpress.com/2012/03/26/roll-forward-physical-standby-database-using-rman-incremental-backup/

  (2) what is DGMGRL?

  DGMGRL is a utility that is used to monitor pending databases. For this
  http://docs.Oracle.com/CD/B28359_01/server.111/b28295/dgmgrl.htm
  http://docs.Oracle.com/CD/B28359_01/server.111/b28295/concepts.htm

• dgmgrl:show stable configuration no - sometimes good, sometimes error

  We have a test environment has some problems, but I do not know what questions are is it.
  
  OS: linux redhat 5
  DB: 11 GR 2
  
  2 primary RAC nodes with 2 day before rac nodes
  
  DGMGRL > see Configuring
  
  Configuration - dwtst_dg
  
  Protection mode: MaxPerformance
  Databases:
  dwtst - primary database
  dwstst - (*) Physical standby database
  
  Fast-Start Failover: ENABLED
  
  The configuration status:
  SUCCESS
  
  DGMGRL > see Configuring
  
  Configuration - dwtst_dg
  
  Protection mode: MaxPerformance
  Databases:
  dwtst - primary database
  WARNING: ORA-16829: accelerated failover configuration is trolling
  
  dwstst - (*) Physical standby database
  WARNING: ORA-16829: accelerated failover configuration is trolling
  
  Fast-Start Failover: ENABLED
  
  The configuration status:
  WARNING
  
  DGMGRL > see Configuring
  
  Configuration - dwtst_dg
  
  Protection mode: MaxPerformance
  Databases:
  dwtst - primary database
  WARNING: ORA-16829: accelerated failover configuration is trolling
  
  dwstst - (*) Physical standby database
  WARNING: ORA-16829: accelerated failover configuration is trolling
  
  Fast-Start Failover: ENABLED
  
  The configuration status:
  WARNING
  
  DGMGRL > see Configuring
  
  Configuration - dwtst_dg
  
  Protection mode: MaxPerformance
  Databases:
  dwtst - primary database
  WARNING: ORA-16829: accelerated failover configuration is trolling
  
  dwstst - (*) Physical standby database
  WARNING: ORA-16829: accelerated failover configuration is trolling
  
  Fast-Start Failover: ENABLED
  
  The configuration status:
  WARNING
  
  DGMGRL > see Configuring
  
  Configuration - dwtst_dg
  
  Protection mode: MaxPerformance
  Databases:
  dwtst - primary database
  dwstst - (*) Physical standby database
  
  Fast-Start Failover: ENABLED
  
  The configuration status:
  SUCCESS
  
  DGMGRL > see Configuring
  
  Configuration - dwtst_dg
  
  Protection mode: MaxPerformance
  Databases:
  dwtst - primary database
  dwstst - (*) Physical standby database
  Error: ORA-16810: multiple errors or warnings found for the database
  
  Fast-Start Failover: ENABLED
  
  The configuration status:
  ERROR
  
  DGMGRL > see Configuring
  
  Configuration - dwtst_dg
  
  Protection mode: MaxPerformance
  Databases:
  dwtst - primary database
  dwstst - (*) Physical standby database
  
  Fast-Start Failover: ENABLED
  
  The configuration status:
  SUCCESS
  
  
  I got those database query:
  
  
  Error 16198
  WARN: ARC3: termination pid 23729 hung on an IO operation
  AUGUST 15, 2012 00:52:02
  
  Error 16198
  ARC3: Error 16198 due to guillotine operation of e/s to LOG_ARCHIVE_DEST_2
  
  GRAVITY ERROR_CODE
  ------------- ----------
  Message
  --------------------------------------------------------------------------------
  TO_CHAR (TIMESTAMP,'DD - MON-)
  --------------------------
  AUGUST 15, 2012 00:52:04
  
  Error 16198
  WARN: Cra1: closing the NEST 29931 hung on an IO operation
  AUGUST 15, 2012 05:45:22
  
  Error 16198
  
  GRAVITY ERROR_CODE
  ------------- ----------
  Message
  --------------------------------------------------------------------------------
  TO_CHAR (TIMESTAMP,'DD - MON-)
  --------------------------
  Arc1: Error 16198 done hung operation of e/s to LOG_ARCHIVE_DEST_2
  AUGUST 15, 2012 05:45:25
  
  
  69 selected lines.
  
  
  I think that something is really wrong with the database. Seems however Eve is in sync with the primary.
  
  Any help here? Thank you.

  Hello;

  Thank you for the information. Is there anything I can do to help?

  Best regards

  mseberg

• question about broker command failover

  Hi guys
  I have a question about switching to the cmd. For example, I have 1 primary database called stdby3 and 2 databases in waiting who are called stdby1 and stdby2. When I made the transition to the cmd to stdby2 waiting for database, why the old principal database stdby3 becomes not a new database of relief once I made a permutation; In addition the new main and backup databases are not open at the end of the transition process
  
  
  output screen:
  
  DGMGRL > see the configuration;
  
  Configuration
  Name: stdby1
  Activated: YES
  Protection mode: MaxProtection
  Databases:
  stdby3 - primary database
  stdby1 - physical of the standby database
  stdby2 - physical of the standby database
  
  Fast-Start Failover: DISABLED
  
  Current situation for 'stdby1 ':
  SUCCESS
  
  DGMGRL > PASSAGE to stdby2
  Continue to pass, please wait...
  The operation requires the judgment of the instance 'stdby3' on database 'stdby3 '.
  Closure of Forum 'stdby3 '...
  ORA-01109: database is not open
  
  The database is dismounted.
  ORACLE instance stops.
  The operation requires the judgment of the instance 'stdby2' on database 'stdby2 '.
  Closure of Forum 'stdby2 '...
  ORA-01109: database is not open
  
  The database is dismounted.
  ORACLE instance stops.
  The operation requires the start the instance 'stdby3' on database 'stdby3 '.
  Start the instance 'stdby3 '...
  Unable to connect to the database
  ORA-12514: TNS:listener is not currently of service requested in connect descriptor
  
  Failed.
  You are no longer connected to ORACLE
  Please log in again.
  Could not start the instance 'stdby3 '.
  You must start the instance 'stdby3' manually
  The operation requires the start the instance 'stdby2' on database 'stdby2 '.
  You must start the instance 'stdby2' manually
  Successful, the new principal is 'stdby2 '.
  DGMGRL > see the configuration;
  Error:
  ORA-01034: ORACLE not available
  Process ID: 0
  Session ID: 130 serial number: 45
  
  DGMGRL > "exit";
  Oracle@localhost ~ $ dgmgrl
  DGMGRL for Linux: Version 11.1.0.6.0 - Production
  
  Copyright (c) 2000, 2005, Oracle. All rights reserved.
  
  Welcome to DGMGRL, type 'help' for more information.
  DGMGRL > Connect sys
  Password:
  Connected.
  DGMGRL > see the configuration;
  Error:
  ORA-01034: ORACLE not available
  Process ID: 0
  Session IDs: serial number 0: 0
  
  DGMGRL > connect sys@stdby3
  Password:
  Connected.
  DGMGRL > see the configuration;
  Error:
  ORA-01034: ORACLE not available
  Process ID: 0
  Session IDs: serial number 0: 0
  
  DGMGRL >
  
  Edited by: user6981287 January 6, 2010 09:27

  Hello

  Replace the sid_name service_name and try reloading the listener.

  Kind regards
  Delphine K

• iOS 10 people record problem/question

  Hello

  I have a couple of "faces" in the issue of people who are coming in white, but acknowledged same 'face' of many times.  Is anyway to update it for photo comes actually?  At a few faces, I don't know that facial recognition found since it is coming from white.

  Hi JohnP007,

  Congratulations on your iPhone 7 more running iOS 10! I understand that some of your faces in the album of people pull up as a draft and you want to refresh. You can try to use the steps below to fix the faces on the thumbnails in albums.
  

  Difficulty faces and names mixed-up

  If you notice that there is a photo of someone in a collection that is poorly identified, you can remove it.

  1. Tap the person you want to remove in the album of people > select.
  2. Type Show done face to emphasize his face in every photo.
  3. Press on each photo that is not the person.
  4. Type > not this person.

  Hide people

  You can hide the people or groups that you don't want in your album of people.

  1. Open the album people and press Select.
  2. Touch the people you don't want to see.
  3. Click Hide.

  If you want to see the people that you have hidden, press on show hidden people.

  People in the Photos on your iPhone, iPad or iPod touch

  This should be corrected without delay faces. Please use the Apple Support communities to post your question. Good day.

• Questions - and answers forgotten

  How to get my 'secret' answers to the questions that I have noted the way back when?

  If you forgot the answers to your questions of security of Apple ID - Apple Support

• I can't reset the security questions. We received notice as below:

  Hello world

  I can't reset the security questions. We received notice as below:

  "Cannot reset Security Questions."

  We have insufficient information to reset your security questions. "

  Please help me as soon as possible! Thank you very much.

  Hello

  You will need to contact the Apple Support.

  The information is available here:

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

  (I'm afraid that no one here can solve the problem for you - this is a user-based community).

• Question of cloning for SSD upgrade on 12 Macbook Pro

  Previously, I did an upgrade to SSD on my Macbook Air to 2012 according to the instructions of JetDrive transcend. Basically connection via USB 3 and using Mac OS X to clear (and format) disc utilities new SSD, then restore again SSD and then remove the original 128 GB SSD and insert the new 480 GB SSD.  For about a month and so far without problem.

  Now I'm trying to 2012 Macbook upgrade my Pro partner (on 10.11.6).  I got a Crucial SSD MX300 to replace his HARD drive.  Crucial comes with (or recommend) Acronis software.  And a lot of the messages of the forum recommend Carbon Copy Clone.

  My question is if I can use the same method for the cloning of the HD as my Macbook Air (just restore disk of Mac OS X utilities)?  This time, I'm upgrading HARD drive and I don't know if something is different.  At the same time, if I got lucky the first time, I don't not ruin Macbook Pro my spouse this time.

  Thank you.

  Yes, you can use disk utility to clone your MBP wives, but unlike CCC, it will not clone the recovery and Partition.

• Question about resolution movie downloads

  If I buy a movie at a certain resolution (780p for example), but I want more later re - download at a higher or lower resolution (SD or 1080 p), can I do so and how?

  Same question perhaps for music. Some of my songs have been bought before the latest Apple codecs.

  Any help is appreciated!

  THX!

  Once you have made a purchase on the iTunes store, you will see your purchased items in the menu under accounts bar > bought. You can simply select the item purchased and re-upload.

  With regard to the resolution of the film for films that are offered, and you select the resolution, you can download it again and select a different resolution. For movies that are available as separate download to SD, 780, or 1080 points, you would be limited to the original resolution you selected.

• Why I can't ask questions.

  I just have a question.  I said that I can't ask questions.

  Do exactly what you did to make this post, but your question in there instead.

• Cannot reset the Security Questions

  Hello my dear

  -J' forgot my account security questions, but I remember password

  And I'm changing my Security Questions, but show me this sentence

  "Cannot reset Security Questions."

  We have insufficient information to reset your security questions. "

  -I want to solve this problem as soon as possible if permitted

  You should contact the account of Apple security team. To join, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (145081)

• Bootcamp Windows 10 question

  Hi all

  Stumbled upon a problem, try to install Windows 10 an end 2014 27' iMac w/retina education runs Yosemite 10.10.5. Bootcamp is V 5.1.4. 32 GB, 3.5 ghz Intel I5. Disk of 1 TB of Fusion. Before you try this, I read the guide of Bootcamp to install windows, but also a number of other tutorials and forum messages about potential problems. This research, I learned that for EDU edition you must change the name of the file from Win10_1607_Education_English_x64.iso to Win10_1607_English_x64.iso. Apparently to have the former name of the file may cause OS X to not recognize the ISO. That fact I started Bootcamp, waited while the software downloaded and created a bootable USB key and partitioned my drive giving Windows 70 GB of space. After that, I got the message that my computer is restarts. Upon restarting, I got the black screen with the blue Windows logo and a spinning loading animation. After a few minutes, a blue screen with a message "Windows has encountered and error with computer and must restart," or something similar. He was pretty quick, so maybe it's not word for Word, but it was not a helpful post in terms of saying something specific. When the computer reboots, I am sent directly to OS X, though a bit slower than normal. I tried to restart with the flash drive to see if the installer would start up, no dice. Try now the Option key at startup, the flash player is not available. Went into my settings to see if I could change my startup on Win disk install USB, no luck it no more.

  Now for the question: How can I get the Windows installation again? What I have to start the process, and if so, what should I use Bootcamp to delete the partition that was created? I have re-run Bootcamp and the only option that is checked is the partition and start and install/uninstall windows and delete the partition.

  Thanks for the help.

  Perform the following two procedures

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  If you use a USB drive, not a USB flash drive, you will have problems. It is recommended to use a 8-16 GB USB2 flash drive.

  If the installation program is located on a USB Flash drive, stop your Mac, connect the USB key, restart and hold down the alt/option key and select the Windows icon in the USB port. This installs Windows in BIOS mode. If you click the start EFI icon, it will install using the EFI mode (faster). You may need to change the partition from MBR to GPT using GPT Fdisk.