Question display Ultrabay 3

Similar Questions

• Simple question R61i Ultrabay...

  It's really a simple question, but I can't find the answer in any of the documents online.  I have a laptop Lenovo R61i 15.1 "widescreen, and I just need to know if it comes with a slot for Ultrabay Slim drive, a drive advance Ultrabay location or an other versions Ultrabay.  I would like to buy a long battery life to adapt to the Ultrabay box, but I see that the different Ultrabay models are not compatible, I want to know what one I need to buy for my computer.  Any help appreciated.

  widescreen 15.4 inch R61i like any other laptop R6x use housing Ultrabay Enhanced readers with EIDE interface and not the new laptop Rxxx SATA interface.

• Newb question - displays only the first of several fields

  As a first application of Bb, I write a stopwatch and I want the larger time scale and the small milliseconds. As part of what I am trying to display several bitmap or label side-by-side fields, but when I run it using the Simulator, only the first is displayed.

  So, for example, what I want is:

  1-2: 3 4:5:6 7 8 9

  with each number in own field but what I mean is just

  1

  that is the first field. If I then use buttons they all appear in the verticalFieldManager by default in horizontalField Manager but if I use labels or bitmaps, then all I get is the first field, even if I remove the horizontalFieldManager and just use the default verticalFieldManager. I googled the question, this forum and spent several hours reading the code examples and documentation, but I have yet to understand why I can't put several fields of these types of side-by-side. I have to have something between them as separators or empty fields?

  The code that I've got so far is the following...

   public TimerView()    {     super();      HorizontalFieldManager timerField = new HorizontalFieldManager();
  
        Bitmap hour10 = Bitmap.getBitmapResource("num_1.png");        Bitmap hour01 = Bitmap.getBitmapResource("num_2.png");        Bitmap minute10 = Bitmap.getBitmapResource("num_3.png");      Bitmap minute01 = Bitmap.getBitmapResource("num_4.png");      Bitmap second10 = Bitmap.getBitmapResource("num_5.png");      Bitmap second01 = Bitmap.getBitmapResource("num_6.png");      Bitmap ms100 = Bitmap.getBitmapResource("num_7.png");     Bitmap ms010 = Bitmap.getBitmapResource("num_8.png");     Bitmap ms001 = Bitmap.getBitmapResource("num_9.png");     Bitmap colon = Bitmap.getBitmapResource("Colon.png");
  
        BitmapField bfHour10 = new BitmapField(hour10);       BitmapField bfHour01 = new BitmapField(hour01);       BitmapField bfHourColon = new BitmapField(colon);     BitmapField bfMinute10 = new BitmapField(minute10);       BitmapField bfMinute01 = new BitmapField(minute01);       BitmapField bfMinuteColon = new BitmapField(colon);       BitmapField bfSecond10 = new BitmapField(second10);       BitmapField bfSecond01 = new BitmapField(second01);       BitmapField bfSecondColon = new BitmapField(colon);       BitmapField bfMs100 = new BitmapField(ms100);     BitmapField bfMs010 = new BitmapField(ms010);     BitmapField bfMs001 = new BitmapField(ms001);
  
        timerField.add(bfHour10);     timerField.add(bfHour01);     timerField.add(bfHourColon);      timerField.add(bfMinute10);       timerField.add(bfMinute01);       timerField.add(bfMinuteColon);        timerField.add(bfSecond10);       timerField.add(bfSecond01);       timerField.add(bfSecondColon);        timerField.add(bfMs100);      timerField.add(bfMs010);      timerField.add(bfMs001);
  
          add(timerField);  }
  

  I know that this code violates probably some best practices or standards, but I intend to clean later.

  -edited for spelling

  Give it a go with images of the numbers.  You have it easy with BitmapFields, because you know how much space they need with

  getPreferredHeight() and getBitmapWidth().  Then you should be able to stick them next to each other.

  If I was doing this and who are looking for a special look at the clock, which seems to be what you are doing, I would like to have the digital icons as you do, and then set an image large enough to hold the value of the clock and in my routine of painting, select draw digital icon proper, in the right place.  As long as you load the bitmaps only once, I think it's the most effective way to do it.

  Of course, a much simpler way would be to have just a RichTextField formatted as you suggest - RichTextField because you can have two different fonts in a single field.

• Question display preferences

  I have a set of mounting upward with three monitors running off a video (3.5 GHz 6-core Intel Xeon E5) MacPro running 10.10.3.

  I have reset the PRAM this morning and now cannot get the monitors displayed correctly. The display prefs window seems not to do what I want it to do. Before you reset the PRAM, I had two monitors (1 & 2) displaying the editing with the third software as a look at a monitor (3).

  Now, the 'display' window monitor (3) appears on one of the computer monitors (1 & 2), and no matter how to move around the arrange display prefs window, it will not be the screen set back up at the way I had it before.

  Edit software preferences are set correctly.

  Any ideas?

  Thank you

  Dan.

  Video Troubleshooting internal and external monitors

• Photosmart B109 question - display message print head problem cannot be removed

  Hi all, I just bought a used B109 printer/scanner, and I can't get rid of the message on the display screen.

  I bought the unit knowing he had a problem with Printhead and am waiting for a new print head, but the problem is, the language of unity has been defined in Czech by the former owner, and I want to change it to English. However, the process to change the language (press on high righ, middle left and bottom left buttons and the display screen) will not work because the display shows the message print head problem, and I can't get rid of the message.

  Is it possible to access the menu, while the print head message always?

  Oh, and is it possible to really connect with HP? Through their support just site ends with Q & A generic, that does not solve my problem as stated above... :-(

  Hello TonyW1967,

  Welcome to the HP Forums.

  In fact, you will have to wait until the new printhead is installed and clear the error before we can enter the setting menu to change the language on the printer.

  Here's the information to call the Tech Support of HP.  If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• Question display Fuze

  I went 14 pages without any post about it... that is...

  Yesterday morning, I went to pause my rocket using the central, and to my surprise, he changed the display for a type of thing Equalizer then a type of track next to the thing, and so on.

  Today, I charged it and tried the same thing, and it seems that he went. Is it possible to reactivate this feature? I would have rather than... something to look at and don't forget the slopes are ensuites in my player

  I forgot to put some specs... that is...

  The "rocket" is the silver 8 GB... 1 GB TransFlash disk inserted on the side for this extra fun... is running the latest firmware 1.x.

  BONES of the hand's WinXP computer transfer/recharge...

  Don't know what else to offer... I know that my computers, hardware and software, so if it is something like this MP3 player... it's foreign... believe it or not

  OdiusG wrote:

  I tried to go back to them, it's a little more interesting sometimes, even playing a song, but the Center button seems to pause only... now there at - it something wrong with my rocket? It is not a refurb or anything like that, so I don't know if "right-out-of-manufacturer" versions are defunct somehow...

  The Center AND management make the same function on my own, do not know why...

• Question display Smartphones blackBerry messages

  Emails unread as a rectangular envelope will display on the home screen.  However, he also has an envelope in this configuration / _ / (i.e., an envelope "leaning").  What is - this and how do I get it off my screen?

  Leaning envelope indicates a text message.  Go to SMS and MMS to display these messages and they will be automatically deleted from the home screen.

  I hope this helps.

• Question display SQLPLUS

  I have a question I need to find the time it takes to run using SQLPLUS. What are the settings that I need to set up before I run the command. ?
  
  Thanks in advance.

  To get the for each statement executed wallclock time:

  SQL>  set timing on
  SQL> select * from dual
    2  /
  
  D
  -
  X
  
  Elapsed: 00:00:00.09
  SQL> select count(*) from big_table
    2  /
  
    COUNT(*)
  ----------
     4680640
  
  Elapsed: 00:00:03.70
  SQL>
  

  Cheers, APC

• Question display model

  I'm guessing this has to do with how it is displayed under the bosses.  I'm looking for a way when the user enters for example $5.000.000,00 it displays the short version of 5 M $ instead.  Is this possible? Any help on this is much appreciated. Thank you.

  Hello

  I don't think that there is an automatic/easy way to do it. You could probably make using the script to the exit event. Should consider the value, convert it to a string and for each group of three '0', assign a letter.

  EG if it finds three zeros, strip them of the string and add it to a 'K '. If there are six zeros, strip out and add M.

  The problem is that you take a number (which you can do more calculations with) and making it a string (that you can really work with later).

  I also think that the script will be a little heavy, in dealing with all the possible inputs. For example, $5,125,030.15.

  Niall

• 'Permit' content remote not displayed

  I will have questions, displaying a remote content Thunderbird 38.3.0. When the window 'Options' poster I say to him and have even went in the settings and told to leave during the whole of the domain i.e. walmart.com and it still gives me a command prompt to view the contents remotely whenever I have the message. I checked that 'show' is set to "original HTML" and still have the same problem.

  Other than global enabling remote all THE contents of all sites (and not even sure if it will work) is at - it a fix for this problem?

  Thank you

  Thanks, I'll look more closely at these emails 'blocked' and see if there are other areas listed in there. For some strange reason my exception list has completely disappeared today so I can start to add news and see how it works (well).

  I think that perhaps one of the problems that I was saying just to show the remote content to the first entry (e-mail address), thinking that this would add all of these secondary entrances to the areas listed below. I'm guessing that may not work that way and best just click on all areas instead of the registered e-mail address.

• Total Questions & precision field only appears in HTML5 after CP6 CP7 conversion

  I can't get these fields to display more HTML5 on the Quiz summary page after converting my CP6 CP7 project file; only the correct Questions box.  If I publish in Flash, it displays fine, but it does not appear in HTML5.  If I take the original file in CP6 and publish on HTML5, the areas in question display very well, so it leads me to believe that something is not correctly convert the CP6 CP7 when HTML5 is involved.

  I tried to uncheck the fields in the Properties tab of Quiz and "Reset Master Slide" to try and refresh the page summary Quiz, but still not go.  I would like to delete the page of summary Quiz completely and rebuild from scratch, but this is not possible because it is related to the Quiz questions in the project.

  Any help would be appreciated.

  UPDATE: if I invade questions Quiz on the temporary project and then delete the page summary, add new and then put the Quiz questions, now displays the Total of issues, but precision field still don't.

  You can always create a custom partition slide, using the system variable quiz and hide the default scoring slide.

  System variables in Captivate 6 - Captivate blog

  Intermediate Score slides - Captivate blog

  Lilybiri

• A few Questions about the advanced Actions window

  Hello

  I have a few questions about the progress of the Actions (using the version of track CP7)

  1. What is the function of the action to "continue?"   Out of the peak action and advance the playback cursor?

  2. What does mean this comment "Nested calls to action advanced is a nice improvement."? Is the advanced decision at the top of a page of action tabs?

  3. What is the function of the option "custom" in the IF statement - "preform action if - custom", it doesn't seem to do anything for me?

  4. where can I get information about the timeline / playhead interaction with advanced actions, i.e. where the playhead is going again at the beginning of the slide. slide custom question - display button, e.g. verification of responses, comments - when all the objects are at the beginning of the timeline. I'm looking more for the read head of infromation functionality rather than how to implement this type of question.

  Thank you

  Donal.

  Continue: If an advanced standard action is triggered by a button, this will not trigger the playback head. If you want out, you can use continues. Continue can also be a choice in a conditional action, when one orders branching has nothing to special, but in advance. Continuous is also the "dummy" statement/command (this is the official name of a line in the dialog box advanced actions) If a statement has become unusable due to some reasons, it will be replaced by continue

  There is no nested call stocks advanced possible right now, one of my many feature requests. It would be sort of a subroutine that you can use over and over again, instead of having to create each time when necessary.

  A decision is one of the conditions to be an advanced conditional action. They allow to create more complex actions, as a loop or arrays are not possible. All decisions are executed in sequence and always.

  Custom: is a combination of or but it is rather limited, because you cannot use parentheses.

  I guess you'd better visit my blog if you want to learn more about the advanced actions.

  http://blog.lilybiri.com/

  I also did several Webinars on stocks advanced, last this afternoon (on the sharing of the actions) for Adobe. They are all available on request.

  Lilybiri

• error location ES1 on IWin games extraction

  Can you please help me to solve the above problem so I can continue to play games IWin. Thank you

  Hi petersenanne,
   
  What operating system is installed on your machine?
   
  There are a few methods that you can try:
   
  Method 1:
   
  Right-click on the game and run the game as administrator
   
  Method 2:
   
  If this does not help, Uninstall and reinstall the games issue.
   
  Method 3:
   
  Run the game in compatibility mode issue and verify.
  
  There seems to be some problems of compatibility with Iwin games.
  Click here to check.
  Also try the program compatibility issues .
   
  You might also be interested in question display in the forums of Iwin and check out what they have to say about it.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• my envy touchsmart screen is sideways

  My Envy Touchsmart screen is on the side... When I re-start, it always is sideway. When I went on the forum was not seen anyone who had the question displayed.

  Hello

  Try to press and hold the Ctrl and alt keys, then press the arrow upward.

  Kind regards

  DP - K

• Windows Update has stopped working and Windows has stopped the unit, he reported problems (code 43)

  Original title: Windows Update stopped working Vista Home Basic.

  HP laptop 550 Vista home basic 32-bit.  Windows Update stopped working, also adapter display Windows stopped the device says it has reported problems (code 43). I uninstalled / reinstalled the drivers, but not make any difference. Thanks for any help.

  Hello

  Question: Windows Update has stopped working

  1. do you get an error message when you try to update?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below.

  The problems with the installation of updates (Windows Vista)

  Question: display Error Code 43 adapter has stopped the unit

  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows (Fixit)

  Hope this information helps.