QUESTION: Extracting data Essbase AND the ODI Agent installation?

Similar Questions

• QUESTION: Extracting data Essbase and ODI Agent installation?

  To extract the data of Essbase cubes, ODI has 'LKM Hyperion Essbase DATA to SQL'.
  We can use (1). ReportScript, or (2). An MDX query or (3). CalcScript
  
  For the extraction of data by using CalcScript, ODI Agent must be running on the same server as the Essbase server.
  
  Anyone know if there is a need for ODI Agent on the Essbase machine if we use the method of MDX query for the extraction of the data?
  
  We would like to avoid the installation of Agent ODI for Essbase-extraction of data.
  
  
  
  
  
  .

  It's just for the Calc script method because it has access to the exported file, you should be fine with the other methods.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Ask questions on the ODI agent?

  Hello...
  
  Based on my system, I've created about 50 scenarios and 6 ODI agent. Each of the agent of the ODI is treated approximately 8 scenarios. It comes to my setup for the ODI agent: -.
  
  ODI_INIT_HEAP = 32 m
  ODI_MAX_HEAP = 256 m
  
  Based on my configuration, each agent ODI is then defined as 256 M.
  
  My question is that one better if I use 1/2 agent basically MAX_HEAP or used 6 agent with the above configuration.
  
  Please advise me...
  
  TQ,
  balleur

  Go to the topology.
  Physical architecture open / Agents.
  Open your agent by double-clicking.
  At the bottom left of the window, you will see the Maximum number of sessions. Set this value to 25 (or whatever the number)

  When you submit more runs than that number already parallel execution, then ODI will be automatically queued for execution place in the order of presentation.

  Press on apply. Restart your agent in the operating system. (ODI reads only the settings and schedules at startup. Appendices can be updated at other times perform the "Update calendar" button in the definition of the topology, or when the ODIUpdateAgentSchedule tool is used.)

  Hope this helps

• where would the ODI agent

  Where would the ODI agent. In Source Server or target
  
  App

  The reason to be on the server target, is that since ODI creates the C$, I$ and also the target tables. ODI may take some time to read from the Source Server, but once done its will empty into the server target and when the performance will be faster since all other operations, processing will be done on the server side target making the action faster else if the agent is another place that it might have to travel a lot in terms of network resources. So its has suggested to go to the server target for the creation of the Agent.

• Extract data based on the year and month

  My clients have taken a field TimeStamp DB Oracle and downloaded the access in a TEXT field format.
  Samples: 20060401001348CS
  
  Everything I'm doing is extracted from the data based on the year and the month. I equal to 200604 *, 200604%. Have also tried to use AS.
  Nothing works. It may just be that dificult. Help, please. Thank you

  Mike

  I'm SO sorry. I have 35 years of Experinece in this area and I have my data (assuming) was all a 200604 date and he was not. The query did work. I'll have more questions and that you do not want to loose credability with this site. Again, I am sorry. Sincere to help thanks.
  Ron

• How to change the name of the ODI agent and port number

  I installed ODI standalone agent (11g) on a linux server.  We now realize that we need to change the name and port number of the agent.  Is it possible to change these or do we need to re - install odi agent?

  I know that I can change the name in the ODI, but I can't change the port number.  I would like everything to be consistent in all of our environments.  That's why we need to change the name of the agent and the port number.

  How do you start the agent? Which command you use to start?

  There are two ways, either by directly calling agent.bat and passing name agent and port don't start or you can run the sh/bat file created during installation (present in oracledi\agent\bin). The file name that is created should look like this (agent_localagent11g) where localagent11g is the name given during installation time and 'agent' is the prefix that was added by ODI.

  There is no configuration file to configure the port number and agent. Make sure that the port number and name you pass to agent.sh must match what is configured in odistudio.

  Agent.bat '-PORT = 20910 ""-NAME = localagent11g.

• Extraction of Essbase formulas using ODI

  I'm extract an Essbase by ODI schema, but it does not extract formulas correctly. Whenever there is a line break in the Essbase formula, instead of putting the words together in the same line, ODI puts the contents of the formula on the second line, which makes it difficult to load in the back. Anyone encountered this problem before. What can be done in addition to remove spaces and lines of formulas.
  
  Thanks in advance.

  Hello

  Consider that you are extracting in a flat file, then it is possible to use something like the replace command on your mapping for example replace (fieldname, chr (10), ") or replace (fieldname, chr (13),")

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to disable the Date/time and the side Pop out window of Windows 8.1

  When I move my cursor/arrow on my touchpad on my laptop 11 flow through the office, or sometimes on a web page, for example, the date and time pop - up down to left and the research / action / start / devices / Setup window appears on the right side of the screen. It makes me crazy. How can I disable this feature of the software?  If I need them, I can simple enter the windows on the bottom of the screen icon. In its current form, it is playing all the time and I want to turn it off. Thank you.

  HP PC laptop flow 11 model: 11-d010nr, product number: K2L95UA #ABA, file system NTFS, Intel Celeron CPU N2840 2.16 GHz, RAM 2.00 GB, 64-bit x 64 based processor, 8.1 with Bing Windows operating system, HP USB 3.0 flash drive 128 GB, Sandisk Ultra SDHC 32 GB FAT 32 memory card

  Hello @BubuBaby,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Notebook PC 11 workflow and settings of Touchpad not working not properly. You can disable the popup of charms by right-clicking on the desktop go to properties. In the properties of Navigation window and the taskbar, click the Navigation tab and uncheck the box - when I point to the upper right corner, show the charms.

  Here is a document on how to troubleshoot the Touchpad, if you need it.
  
  If you proceed to the section setting of TouchPad pointing the sensitivities it should help solve the problem. Enable or disable individual gestures by clicking the check box next to each item. A check mark in the check box indicates that the gesture is turned on.
  
  Hope this fixes the Touchpad settings.
  
  Thank you.

• Protégé M200: Question about Vista TPM and the Bitlocker

  You want to know if I have a TPM chip to launch bitblocker on the M200 using Vista. Just call Toshiba Technical Support - the guy was totally distraught!

  If I don't have a TPM chip, then I can install it?

  Hello

  It is a good question. To my knowledge the Portege M200 does not support TPM but the Portege M400, R400 module and the R200

  But the Bitlocker, which is only available on the Vista Enterprise and ultimate can also be used without the TPM chip but then some functions are not available; for example, the SecureBoot.
  Without TPM only the OS volume encryption is available.
  In this case you can encrypts the entire Windows volume including both data and file system user, the file of hibernation, the page file and the temporary files.

  Using volume of BONE (HDD) encryption an encryption key will be generated. This key will be written to the USB and then the USB is required!

  AFAIK the Bitlocker requires 2 partitions. A partition must be created as needs at least 50 MB primary partition. I recommend a? about 1.5 GB
  The second big partition Vista can be installed.

  After the installation of Vista the Bitlocker must be enabled in Group Policy (units without secure TPM). This can be done using the command 'gpedit '.
  And then under models of administration-> windows components-> Bitlocker bitlocker function can be activated!

  Anyway, there is much information Bitlocker and I think you should also consult the Microsoft Web site for more information:
  BitLocker Windows Drive Encryption step-by-step guide

  I hope I could help a little

• By using a data form and the display of graphics

  Hi guys,.

  Don't know how to approach this issue.

  My partner has a severely autistic son who has aggression and the wild emotional changes. Then we wanted to use a predetermined list of control on a Web page, so it can record and save daily moods were a few displayed graphics (for example a graphical pie or line graphs etc.) to show trends in its conduct on a daily, weekly and continued basis.

  Seemed much easier that trying to record everything on paper as we do now and we well on the use of a Web page so she can access and save if we are away from home or at one of the clinics.

  Can is this possible in Dreamweaver and someone suggest how to on this subject? I think that we would need a data graphic radio button or something like that, a database and then a way to extract and view a chart.

  Kind regards

  Paul

  Public static HTML has no opportunity to do such things. We could use use the script on the server with a database to preserve the history of day to day information side. As a result, with limited experience (static only), I would say your chance to be able to produce something like you describe in a reasonable amount of time would be low. I agree with the suggestion of Ben to use an online tool which is able to give you what you need. Try it and see if you can adapt the features of Google spreadsheet.

  However, with your experience, you can pick up enough information PHP and MySQL just Google search for tutorials online on the subject. David Powers has a great resource of information out there that could help you get started-

  Amazon.com: David powers: biography, Blog, audiobooks, Kindle books

• The list of virtual machines, data warehouses and the folder name by cluster

  
  Hello!!  I hope someone can help me with a PowerCLI script that can pull the info from the object into a file, txt or csv.  In order to get our environment cleaned before our next year Dr. with MRS, I want a list showing each VM and the data store (s) in that it is the name of the folder in the virtual computers view and models.  We keep our VMs organized by creating folder names that correspond to the application running on the virtual machine.  I mention a SRM than last year because our protected groups matched groups of our table of 3PAR Rcopy.  However, we have added over 200 new virtual machines from this era and the members of my team essentially placed these new virtual machines on the first available data store that had enough free space.  Unfortunately, we are not using storage profiles... it's scheduled for next year.

  Information extracted would look like the following:

  ServerName Datastore folder name

  Server1 LUN0 ActiveDirectory

  Server2 LUN0 ActiveDirectory

  Serveur3 LUN1 ActiveDirectory

  Server4 LUN3 Argo

  Server5 LUN7 Argo

  LUN6 Lockbox Server6

  LUN5 Lockbox Server7

  Serveur8 LUN9 Citrix

  etc...

  Any help with the extraction of this info from vCenter would be greatly appreciated.

  Thank you

  Charles

  You can redirect the results to a CSV file, for example

  Get-VM |Select Name,@{N="Datastore";E={[string]::Join(',',(Get-Datastore -Id $_.DatastoreIdList | Select -ExpandProperty Name))}},@{N="Folder";E={$_.Folder.Name}} |Export-Csv C:\report.csv -NoTypeInformation -UseCulture
  

• Reference DELL 1850 and the HA agent configuration problems

  Hello

  I have a problem with DELL 1850 server while moving it to a cluster use HA. On the other DELL 2950 Server I worked well and I can move it to the cluster without problems and enable HA. I have 2 x 1850 and on two of them, I get the same following problem:

  18502.vividsky.local HA configuration

  Cannot complete the configuration of the HA agent on the host. Another HA configuration error.

  System

  VM2003 - X 64

  HA agent has an error: cmd addnode failed for

  main node: internal error of AAM - agent could

  does not start. : HA unknown error

  error

  2010-10-30 10:57:50

  Reconfigure the host HA

  18502.vividsky.local

  Administrator

  HA agent has an error: cmd addnode failed for

  secondary node: / opt/vmware/Mao/bin/ft_startup

  Cannot be completed within 3 minutes: unknown

  HA error

  error

  2010-10-30 10:21:43

  HA configuration

  18502.vividsky.local

  I made this establishment a few times using esxi in vmware workstation and used vmotion on it without any problem.

  I don't know if that is a problem because of the CPU as the 1850 uses a Pentium 4 XEON and the 2950 a Quad core (coreduo) Xeon. On the vmware workstation it worked well because I use a processor core 2 duo as well. Is this because VT? they are capable of 64-bit P4 Xeons is not VT

  in the 1850s, I have fiber connected to a SAN network cards, but I removed the warehouses of data from it as I myself suspect this could have an impact on HA configuration, but as you expected, it did not help :/

  You guys have no idea what I can do?

  Can you send me the tarred contents of the directory/var/log/vmware to host?

  The compatibility of the processor is not the problem. The two hosts are able to communicate on port groups 'management' common?

  Marc [email protected]

• Programming using the ODI agent?

  Hello
  
  I want to program an interface using the scheduling option in ODI11g. For this, I saw somewhere that I need to have the agent that is running. I was able to start the agent of
  command line and run the interface. How can program the interface without going through this process. I also noticed that we can run as a windows agent
  service in 10g. But I don't see any script or info for 11g. Any ideas on that?
  
  Thanks in advance!
  
  PM

  If you do not want to start the agent command line then you can use OPMN to control agent - http://john-goodwin.blogspot.co.uk/2010/12/managing-odi-11g-standalone-agents.html
  Your other option is to deploy the J2EE agent in WebLogic, but you would still need start the server managed by a mechanism for management nodes for example or manually create a one-stop service.
  Once you have the agent running, you can simply set the interface/scenario of in the designer or operator.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• ERPI configuration: data server and the physical schema

  Hello
  
  I use ERPI11.1.2.1.
  
  I try to configure ERPI following the documentation of erpi_admin.
  
  It is said that to create the database server and the physical schema for ERPI, I must develop 'ERP Integrator' in the tab 'Physical Architecture' in the Manger of the topology of the ODI.
  
  But I have no 'Integrator of the ERPI' node 'Technical' below in physical architecture :-(
  
  Thanks in advance for your help
  
  Fanny

  You need technology that works on the basis of data of the ERPI. So if your the ERPI on Oracle database, expand the Oracle technology and then right-click and choose Insert database server.

• Concatenate 2 data fields and the values on the same line

  Hello
  
  I'm pretty new to BI Publisher. I want to concatenate 2 data (product and ProductType) fields. These concatenated values so I want to put them on a single line.
  for example.
  the values should look like
  
  ProductType1.Product1, ProductType2.Product2, ProductType3.Product3...
  
  Thank you.

  Check the forum thread
  Re: Display of horizontal lines
  for a similar request.

  If you still face questions send your sample xml and rtf