Satellite L300-1BV case in bulk and seems like loose hard drive

Similar Questions

• Satellite L300 - how to reinstall Windows Vista on the replacement HARD drive

  Hello

  My HARD drive has stopped working on my PSLB9E. He started making whirring noises and wouldn't start. all tests show it does not. Now I guess I need a replacement for HARD drive and watched a TOSH MK2565GSX or other similar. Problem is I can't find my Windows key anywhere.

  It is can get the key to Toshiba/Microsoft giving them all my contact information or do I have to buty a new HARD drive and install a copy newly purchased Windows on? If Yes, then I'll put W7 on I guess.

  Thanks in advance for any help I receive!

  SB

  > Problem is that I can't find my Windows key anywhere.
  The preinstalled Windows operating system and the image that is placed on the Toshiba recovery disc were already activated and therefore the serial key is not necessary.
  If you don t have the recovery disc, so you can buy this drive here:
  http://backupmedia.Toshiba.EU/landing.aspx

  It s not expensive; 30 euros I guess.

• Satellite L300-1BV and fatal issues with WXP

  Hi guys -.

  Very well. My Toshiba Satellite L300-1bv, loaded with a copy of Windows XP SP3 home edition, started having glitches and slowing down questions that grew progressively until it would completely freeze after a random interval of time. Try to boot now returns a missing hal.dll error.

  I'm almost certain, given the characteristics of this that the hard drive is a failure, mainly because he began to thrash continually without reason a few months in him. On the other hand, it could be a mistake of memory through Google diagnostics.

  I ve managed to install a copy of Windows XP Home SP1 edition on a new partition (the one broken leaving intact), but I don't know how long it will continue to operate in light of a possible hardware failure so I don't want to commit.

  Any help would be massively appreciated.

  Hello

  What assistance do you have exactly?

  As you say the problem could be related to a hardware (RAM, HARD disk problem) or software (missing hal.dll, corruption of the operating system) problem

  If new OS installation (with all patches, service pack) no did not help, then a problem of material is possible in this case, replace defective parts
  No one can say what part could be corrupted it s is necessary to test means that the RAM or HARD drive needs to be replaced and then you could test how it works

  PS: there is a nice tool to drive HARD HDD Fitness called diagnosis test for google's free simply

• Satellite L300-1BV - how to connect to the TV?

  Hello
  Should what cable I plug the Satellite L300-1BV to my TV?

  Thanks for the answers in advance

  Hello

  What video ports you have on your Satellite L300 of output?

  I have the Satellite L300 too but he has only normal VGA output. This means that I m using a cable RCA VGA adapter to connect it to my TV. After that I connected the cable that I turn on the TV and then the laptop. On the laptop, you can switch between monitors now with FN + F5.

• Satellite L300, how to start from the cd/dvd external USB drive?

  I have an old laptop Satellite L300, latest version of the BIOS (2.20) installed.
  I would like to start on a connected external USB CD/DVD player
  PROBLEM:
  BIOS will not start on this CD/DVD disc.
  In the BIOS boot priority is: CD/DVD, USB, HDD
  BEHAVIOR:
  When starting, computer ignores the CD/DVD, ignores the USB and start on the HARD drive.
  QUESTION:
  Is it possible at all boot for CD/DVD USB external?

  Thanks for the efforts made to respond.
  Concerning

  It is NOT possible, I thought. REASON: The BIOS does not, does not reckognize CD/DVD (does not test if code such USB-CD/DVD bootable) drive connected via USB.

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• Cloning hard drive with Clonezilla failed, gave a bad sector error message and now the original hard drive will not boot

  Original title: startup problem

  I tried cloning from my hard drive with Clonezilla, and he gave me a bad sector error.  I have since run the hard drive test in bios and it passed.  Anyway, clone has failed, and now the original hard drive will not boot.  My dvd player won't turn when I try to load the Vista repair CD (Vista Home Premium 32 bit).  Clonezilla removes the start settings for the original disc?  And if so, how can I restore it?  The computer starts just a black screen with a cursor at the top left.  When I install the hard drive in a box and connect it to another computer, it shows the partitions and files all seem to be there.

  Hi DougEisenmann,

  Clonezilla is not supported by Microsoft.

  If you are unable to boot from the Vista repair disk then you will need to go into the system BIOS and make sure that it is configured to boot from the DVD drive.

  Check out the link:

  Windows to boot from a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-Windows-from-a-CD-or-DVD

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  See also the thread which has some troubleshooting steps for this same issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/Windows-Vista-crashedstartup-repair-wont-launch/49315171-1601-49DD-84fe-50bebd9ddbae

  The above link contains third party links provided by other users.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• How do I set up a dual boot Vista and XP with 2 hard drives?

  Dual boot Vista and XP with 2 hard drives

  I tried to get my computer has a separate hard drive put in place that lets me run Windows XP or Windows Vista. I tried the path of the CMD, but I could do things wrong with that because the news NTLDR appeared much too different info from Vista. Currently, I have deleted this change to the startup configuration. I want to know what I have to do to get these two to be able to boot. I noticed problems similar to mine, but the answer always seems to be a software that would cost me money.

  Thank you

  Tevans95

  Hello Tevans95,

  You cannot install two different operating systems on two different disks. For a dual-boot environment, you must install both XP and Vista on the same drive with different partitions.

  In addition, you must install Windows XP first and then Windows Vista.

  You can check the items below which will give you information on Dual boot.

  Install multiple operating systems (multiboot)

  Set up a dual-boot system

  Change the default operating system for startup (multiboot)

  There is no software that can help you to install XP and Vista on different drives.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.

• How I can run XP and Win7 on separate hard drives and one PC?

  I had a HD crash all using XP Pro. I bought a new 1 TB hard drive. I got a free upgrade to Win7 with my PC. I proceeded to program my new hard drive with XP and made good.  When I bnotted I was asked if I wanted to go to Win7 or if I wanted to an earlier version. Worked pretty well.  2 OS - XP Pro and Win7 with their own hard drive.

  Last week, I discovered 2 very important programs have to use XP. I bought another hard drive; and now my life is quickly falling away.  I have worked with Dell throughout the day and have the first hard drive using XP but I'm having some difficulties to paginate in Win7.  He suggested, I use the function F2 to setup and change the sequence of boot but that takes a lot of extra time. And now my (currently (E) CR reader contains a description of hard disk)

  Can anyone provide a solution to this.

  Help a dummy! Please, I beg you!

  Whiskers

  Installing dual Boot with Windows 7 and XP
  (Read each method in this article and that fits your needs)
  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  EasyBCD allows to appear more user-friendly boot menu:
  http://NeoSmart.NET/DL.php?id=1

  J W Stuart: http://www.pagestart.com

• CHKDSK runs automatically and checks my 2nd HARD drive and shows a lot of mistakes, 2nd HARD drive is gone.

  Hi, I have 2 80 GB HDD (SATA - 1 + 2 - ATA). whenever I turn on my system (XP SP3) then chkdsk runs automatically
  and checks my 2nd HARD drive and shows many errors like "replacement Windows a bad cluster in file:...". "like that.
  and it takes a lot of time around 3 to 4 hours. He then shows the windows xp desktop,
  but the problem is MY SECOND HARD drive IS NOT SHOWN in EXPLORER, IT IS GONE.
  Can someone help me, I have my imp data on my 2nd HARD drive.
  How do I return there without losing any data or file?

  Hello

  1. don't you make changes on the computer before this problem?
  2 - is an internal hard drive?

  Step 1: Check if hard driver is getting detected in Device Manager and send back the same.

  Reference:
  By using Device Manager
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_dev_mgr.mspx?mfr=true

  Step 2: Check if this disc is getting detected in disk management.

  If the hard drive is getting detected in disk management and there is no drive letter assigned, and assign a drive letter and check.

  Reference:
  How to change drive letter assignments in Windows XP
  http://support.Microsoft.com/kb/307844

  Step 3: To disable chkdsk at startup, follow these steps:

  a. Click Start, run and type regedit.
  b.Navigate to the following subkey:

  HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Control\Session Manager

  c. change the BootExecute entry: autocheck autochk *.
  d. exit your registry database.
  e. restart.

  Registry warning:
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• How to find all the old files and documents on the hard drive

  Original title: how to find a file

  How to find all THE old files and documents on the hard drive

  Hello

  -Are the old hidden files?

  I recommend you follow the steps in these articles for help.

  Show hidden files
  Find a file or folder

• How to transfer all programs and files to another hard drive

  I want to transfer all my programs and files on another hard drive.  How I could do. ?  my windows has been preloaded.

  Hello

  programs need to be reinstalled from the original media

  You cannot transfer installed programs

  to transfer files, read this:

  Move your folders and files of the user to a different partition

  http://www.vista4beginners.com/move-user-files-folders-to-another-partition

  _______________________________________________

  and I think you should dissipate what you try to do

  Another question in the repair of Vista, that you want to move that installed full operating system, not only programs and the files on another hard drive

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/how-to-transfer-Windows-onto-a-new-harddrive/33df38cf-9477-E011-8dfc-68b599b31bf5

  and read this on how to back up your data and also make a complete pc backup

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

• I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  Download the CS5 products