Question: Formulation moisture G/L output of material loss

Similar Questions

• Question formula numbers

  = IF ("J" = B8, C8, "No") that's the formula that I use and say that its location is D300.  Is it possible to have the entire column 'B' instead of just B8 or a beach like B1 to B290 for the letter 'J' reference and output then the content of the column "C"? For example if:

  B2 = C2 = 'truck' and 'J' and

  B3 = 'R' and C2 = 'car' and

  B3 = C3 = 'bike' and 'J' and

  B4 = 'J' and C3 = "flat" and

  B5 = C3 = 'bus' and 'R'

  Then the output to the D300 (or a range of rows) would be

  truck

  bike

  plane

  I created a list of 300 lines and throughout the list, the first letter of 4 different names is in column b.  Basically, I would like the output of the corresponding 'C' column appear.  In this way, the list is specific responsibilities for this person?  Thanks in advance for any help.

  Rick

  Hi rmac,.

  " is there a way to have the entire column 'B' instead of just B8 or a beach like B1 to B290 for the letter 'J' for reference"

  You can use the MATCH or a SEARCH, VLOOKUP to search the entire column 'J', but these will be pick up only the first occurrence of 'J' in the column. It's is not, in my opinion, what you want.

  Here is what I understand of your table:

  You have a list of acronyms, all repeated several times in column B, from B2.

  Next to each initial, in column C, is an item associated with this individual.

  For each trip, you want to generate a list of all items related to that person.

  This seems doable. Assuming that the elements are distributed between four individuals, 300 lines would mean an average 75 per person elements.

  Here is an example using fewer lines (so it fits on the screen). I also placed the initials in column A and the elements in column B, to reduce the space required for the images. Double click to zoom.

  

  Table 1, the left is the data table and did most of the calculations.

  The initials are in column A, the elements in column B.

  Columns C, D, E and F are used to construct the list for each individual, using the formula below.

  Note that the table contains 2 lines header and that the cells of the row 2 are empty. This allows labeling the columns in row 1 and using the same formula in all cells below these lines, which allows to automatically fill the formula in the new lines when they are added to the bottom of the table.

  A single formula, entered in cell C3, then right to full F3 and up to the last line in the four columns in the table.

  C3: = C2 & IF ($A = CAN$ 1, $B & ",","")

  The formula gets the contents of the cell above (C2), then IF the first column A corresponds to the first tier 1 of the column that contains the formula, adds the contents of 'the line' in column B, followed by a comma and a space, OR the initials do not match, which adds a string NULL ("").

  Table 2 shows a formula, entered in cell B2, and then filled up to B5.

  B2: INDEX (table 1: $A:$ F, LINES (1::A, table headers), MATCH ($A2, table 1: $1: $1.0))

  The INDEX function returns the contents of the cell to a range of cells, located at the intersection of the row and column specified by the row index and column index.

  The range of cells is columns A to F of table 1 (ie. table 1)

  The row index is LINES (1::A, table headers) that always points to the last row of the table.

  The column index ($A2, table 1: $1: $1.0). This returns the position in the list of values in line 1 of table 1 of the initial report in A2 "this table." "A" is the third element in this list, until the column index points to the third column, column C.

  The index function returns the string of the cell in the last row in column C of table 1.

  Kind regards

  Barry

• Why the node formula Eval gives only outputs 9?

  I am allowing the user to input so values and formulas he convert raw data to data acquisition, but output from the Eval formula node values give me only 9 values in table. I don't know why, because I'm him giving 16 formulas, 16 outputs variables, variable input 16.

  Seems to work fine for me on LV10.  I see you have an indicator of the bunch, if you use ArrayToCluster don't forget to right click and set the size of cluster on 16.  When I see 9 it is usually my first assumption.

• Questions about the synchronization between output and analog input

  Hi all

  I now have a simple task which head a signal voltage (from PXI ao0) on a circuit and then your comments a voltage at the terminals of a component, for example, that one of the resistors in the circuit, through ai0 on PXI. So in this case, the synchronization between analog input and analog output must be made to avoid error of phase shift.

  I tried to build my VI by learning this example: https://decibel.ni.com/content/docs/DOC-3882

  However I have a few questions.

  1. I noticed that there is a merged error fed the "start task" sub VI for the analog output.  What is the point of fusion to mistake?

  2. I enclose my VI (also shown below) for the output voltage. I put my writing of DAQmx Subvi in the while loop so that I can change the voltage while the VI is running.

  

  However, in the example, the author has been reading outside of the loop and before even the start task. What difference will it make?

  3. I have also attached my synchronized VI. I always put the wavegeneration and the DAQmxwrite in the loop. A bulging guard error saying about samples is not available and needs to a higher sampling rate or a longer wait time. What causes this?

  I appreciate that these problems can be solved. Thanks to you all.

  (1) first you need start the task of acquiring, he'll wait for trigger here. And then you start the build task that provides this trigger. If acquisition could trigger and never start.

  (3) you must first write something in the buffer (writing DAQmx), then only you can generate it (Daqmx Start).

  Check Cont Gen tension Wfm - Int Clk - no Regeneration.vi in the help-> examples for example.

• Copy of a Formulation with a referenced output

  Hello

  copy of a Fromulation which has an Agile referenced output creates a new formulation (number of different specification) that points to the same referenced exit (same number of specification).

  is it possible to create a new output referenced as well as the wording copied in Agile Agile 6.1.1.5 or 6.2?

  Thank you very much.

  Best regards

  Stefano

  Since 6.1.1.5, you are able to subscribe to events, such as create, copy, save.  Check the EventFrameworkExtensions in the PE reference implementations.

  6.2, there's a new extensibility clone, whereby you are able to customize the behavior of clone. The CloneExtensibility reference implementation is available in the Feature Pack 4.0 or higher.

• How do I get the data of "Regulatory BOM" Formulation with SQL query output

  Hello

  We would like to implement a State of BiPublisher that displays "Regulation BOM" (wording-> click on TAB Formulation on exit Popup-> TAB Composition) information table.

  How could get us this information with an SQL query?

  Thank you

  Annarosa

  Hi, given 'Regulatory BOM' output of the Formulation are more complicated than expected. Attached is an example. You can test and make the appropriate changes to your report.

• Question formula for Excel to numbers

  I have a Sumproduct formula to an Excel spreadsheet, but I need to make a version of numbers that does not allow this formula.  I'd appreciate any help!

  What I'm trying to make (which works perfectly in Excel with this formula) is to count a line if it meets the following criteria:

  (1) date in column B is in the current year (not preprogrammed for 2016 or a given year)

  (2) the date in column B is in a given month (the below formula returns the number for the month of February '= 2')

  (3) description in column C says "Retail".

  = SUMPRODUCT ((1 * (Year(conversions!$B$3:$B$9976)=Year(Now())) * (MOIS (Conversions! $ B$ 3: $B$9976) = 2) *(Conversions!$C$3:$C$9976="Retail"))))))))

  As you have discovered, numbers does not support the form of 'matrix formula' of SUMPRODUCT.

  You can, however, use COUNTIF to accomplish similar things.

  = SUMIFS(<column>,<condition>,<column>,<condition>...<column>,<condition>)

  

  The formula in B2 of table 2:

  = COUNTIF (table 1: $B, ">" & EOMONTH(A1,0) will GET (DATE (YEAR (NOW (), B1, 1), −1), table 1: $B, "<" & EOMONTH(A1,0) will GET (DATE (YEAR (NOW (), B1, 1), 0) + 1, table 1: $C, "Retail")

  Lines 4 and 5 are simply to illustrate the dates built by the party 'conditions' of the formula. One is the end of the month preceding the month chosen, we're at the beginning of the month following the month selected.

  So the formula is indicative of numbers to count the dates in column B after the end of the previous month this year and before the start of the month next in the current year, where the value of column C is "Retail".

• Question of Timestamp of average output DC - RMS.vi

  I'm having a problem with the timestamps on the output waveform RMS value of the DC - RMS VI on average. For some reason, it is as if the time will speed almost triple! This can be seen in a graph shaped wave, as well as when data is stored in a file. When the VI of DC - RMS average is removed the timestamps back to the correct speed.

  See the timestamps in the lower right data attached maps. The plot at the top of the page uses the VI DC - RMS average is not the case of the background plot. Both ran for the same amount of time, but as you can see the upper trace got about 18 seconds before the background plot.

  You need to reset your average with each iteration. I'll be honest, I don't know exactly why you need to do this, but it solves the problem and you get a beautiful curve of RMS who remains with the timestamps of the RAW files.

  

  Edit: It seems that something weird happens with the value of t0 after VI RMS does its thing. The t0 of the waveform of the RMS is to jump before t0 of the raw data of 0.08 seconds each iteration. It should be always 0.08 sec higher, but for some reason it is additive without resetting the filter.

  Edit2: You also get a corresponding timestamp if you change the type of averaging exponential instead of linear default value. The curve is slightly different but because you now get an average including the previous data, not only the most recent points being on average.

• question about the date as output parameter

  Hello
  I tried the following procedure to extract the out parameter as DD/MM/YYYY

  CREATE or replace PROCEDURE p1 (p IN NUMBER, x OUT date, y OUT date) 
  IS 
  BEGIN    
  x := to_date(to_char(sysdate,'dd/mm/yyyy'),'dd/mm/yyyy') ;
  y:=  to_date(to_char(sysdate+1,'dd/mm/yyyy'),'dd/mm/yyyy') ;
  END P1; 
  
  declare    
  foo date;    
  bar date; 
  begin    
  p1(5,foo,bar);    
  dbms_output.put_line(foo || ' ' || bar); 
  end; 
  
  And the output is   17-AUG-12 18-AUG-12   , instead of   17/08/2012   18/08/2012  

  The nls_date_format is: DD - MON - RR
  
  How can I get the output as dd/mm/yyyy format parameter.
  Thank you
  
  Published by: Smile on August 17, 2012 08:31

  Because your data type is date, the default output is the NLS_DATE_FORMAT.

  You can set NLS_DATE_FORMAT jj/mm/aaaa, but in reality, it would be better to do the following:

  Declare your out parameters as varchar2
  Convert date to be returned to your format of binding and value the more parameetrs to have this value

• Question - formula Member

  Based on past requirements for 'Suffering' (a member dynamic calc) is the formula of Member
  
  Suffering = before year-> year Total + @SUM (& CurrYear->(Jan:&Priormonth));
  
  The logic above will work well from next month, i.e. February, but fails to work when the current month is the month of January.The problem now is that & Priormonth = decrease, so the formula is the addition of Jan: Dec values for the current year, which shouldn't be the case. For the current month, i.e. January suffering should just be the total value of the previous year. How this formula member could be changed in a way that it satifies irrrespective requirements of which it is?
  
  I can change to -.
  
  Suffering = & title-> YearTotal + @SUM (& CurrYear->(Jan:&Currmonth)) - & Currmonth;
  
  Please let me know.
  Thank you.

  A very quick thinking would be to consider applying if conditional. OR | ON THE OTHER. ELSEIF | ENDIF logic.

  Thank you

  Todd Rebner

• Problems with the service of version 9.0.2? Sudden research questions of text in the output WinHelp files

  I've been building and using the same aid project in multiple versions of Robohelp since 2002 about.  Upgrade to Robohelp 9 earlier this year (Office 2010/Win 7), properly migrated project in RH9 and Word 2010 RH7 and W2003.  Despite being really bug RH9 and doesn't play well with Word, were able to continue to build multiple versions of the project without successfully exit WinHelp 2000 compilation problem, no error messages all basically good.  Until the 9.0.2 update.  Of course, the update fixed the issues of speech, now HR and Word 2010 not play very well. But now I get the dreaded "cannot search, display tab: error 177' Message in compiled projects.»  This same message now appears on WIn XP machines that have the project distributed.  Also find full-text search is available on the Win 7 despite the warning, but on a XP machine machine only partial text is available for searching (so this is not the question of Win7 re display of files HLP - win 7 has all the patches of register machine and MS. HLP Patch installed to run and has not been a problem to date).  Coincidence?  This started to happen since the 9.0.2 update installed?  (The cause of the error message doesn't seem to be the traditional corrupt file GID on PC like on XP machines before the new installed help file, it will be deleted).  Have I somehow changes the settings in the HPJ file or another project file generation?  Is this a problem of indexing that I can fix?  If so someone at - it ideas?  Come to think of him with ideas at all about what is happening here and how can I solve this problem?  (I'm considering back in the initial installation of RH 9 (implemented with Bugs) and see what happens but fear I might have inadvertently installed something version 9.0.2 )

  Another interesting question is that the immediately previous version of this project (built with the Buggy of RH9 version) re - unfolds on the other computers and XP very well.  So why I suspect 9.0.2?  Anyone with some help pls?  Where I could look in settings (if any) to correct the problem?  I tried to re - create a completely new project with the same word documents, but using the origingal. HPJ file and the same problem presented?

  Peter,

  With a lot of relunctance, (probably because of being on holiday and in the middle of the Christmas break), I've rolled up their sleeves and rebuilt the project from scratch. (What else do you ndo when on vacation?-can think of several things). The project is bitmaps quite large, consisting of 38 separate Word Documents, 908 topics, 731 jumps, 907 keywords and 37.  This project was built in 2000 and enjoyed time has reached this size. Each year, some 15 to 20 of the draft versions are built as subjects and content changes.  The propject resulting is distributed on a netwrok involving 3 operating sites and more than 250 terminals.

  The first step in correcting this problem was to place all word documents in word 2010 format (38) project.  Before that documents previously saved in Word 2003 format and open in Word 2010 (compatibility) mode.  On the assumprtion there was a problem of compatibility between 2003 and 2010 word format causing the compiled research questions.  I saved all the latest known version of 'Good' of the project documents in this mode.

  Once all documents saved to Word 2010 format, each document has been individually then imported into the new project, the project saved and built after each document imported.  This was done for was the origin of the problem to ensure that a particular document.  None appeared.

  Once that all the 38 documents any OCD has created the last well-known CNT file.  Imported into this new project in the form of measurements of the CNT old file rather than use then file itself.  Project saved and rebuilt again.  Still good.  I used the text instead of the CNT file again just to try to eliniate hidden, coding of corruption in the file of the CNT.

  Then the sequences to browse relevant have been updated in order to meet the requirements, project archived for proken links (found nothing) or any other error.  Once again.  Nothing found.  Re-built and still saved.  No problem identified with the project.

  At this point the last well-known version has been restored in a new project just in Word 2010, format, changes in the (next) version of fault had not yet been restored to the project.  5 files in this version had a lot of changes that I have taste not individually make each change.  In order to reduce to a minimum rework them, I took the opportunity to copy the text of the documents and paste the text into the new word format documents (rather than import something that may have corrupt and coding). In each case I deliberately does not include the first or the last lines of the documents in the copied text, again try to eliminate the import of any coirruption that may have existed?  Yet once, save and rebuild the project after each import text.

  Final score, a return without erors project.  Tested on 2 different local machines (both running Win 7 with Winhelp patch applied) no error returned.  Deploy the updated on the work network this morning.  (XP systems), yet once no erors returned and full don't search feature now available.

  So, what was the problem?  Not sure that I'll never know, (I have a second project on another topic which is still in Word 2003 format, built under this version of RH9 and she does not have the same problems I had in this project).  Whatever, it was an absolute pain, many lost hours, but a positive result (finally).

  Thanks to you and the people who have offered nhave his help.

  Bryan

• Analog OUTPUT material

  Hello

  My question is about the analog output (0 - 10V) of the myDAQ unit.

  On the card, you can read:

  "Overdrive Protection +-16 V forever."

  Lets imagine the worst case: 0 V output DQA, but outside a battery or anything else is connected with 15 V to the analog output.

  Fact an "unlimited" current in data acquisition or protection 'Overdrive' works here and the material is safe to destroy?

  The background: I want to OD are protected from transient voltages and toilet on a simple zener diodes clip or a tvs diode...

  Thank you all, Markus

  Markus,

  To use a zener diode as protection, you must also have an impedance of current limiting in series with the source against which you are protecting.  The manual for the device of maDAQ indicates that the lines of the AO are pushed by OPA1642 op amps.  TI the MSDS for this unit shows the current limiting internal ~ 36 my short circuit with Earth and a thermal shutdown circuit that tries to protect against the terms of overpwer.

  However, under your 15 V battery, 11 V zener and 0 V programmed DAQ exit, the situation may be different.  The current from the battery through the zener will be limited by the impedance of cables or any type of resistance on the line.  This has no direct effect on the myDAQ device, but it will probably destroy the zener unless resistance limits the current to a lower maximum current nominal zener.  As long as the voltage at the output of the myDAQ is lower than the internal supply voltage (+/-15 V), on the OPA1642 current limitation should apply.  With 11V applied to the output and the value set to zero the device would probably be to try to sink the maximum current for-15 V power supply.  Which translates to a dissipation of power of more than 900 mW, which exceeds the rated capacity of the op amp. Themal protection should, in principle, reduce the current to a level that does not exceed the thermal limit under development.

  This test can be a costly process. The unit may be destroyed.  Given that the maximum current specified for an analog output channel is 2 my and the maximum voltage is 10 V, I would consider a series resistance of perhaps 1000 ohms and clamping schottky diodes at the + 15 V and - 15 V power supply.  This will limit the current to 10-20 my in all conditions you have mentioned and would also provide protection to the case where the battery is connected the myDAQ device is turned off. He alsoe does not care about the polarity of the external source.  It will drop the output voltage according to the load impedance.  If this should be used in a student lab, the calcualtion of this decline is something they should be doing anyway, and would be a small price to pay for protection.

  Lynn

• How to: Apply the second and third output referenced Formulation

  Our use case is-

  There are several ways to squeeze oranges in orange juice of matter with levels of by-products.  We have a 'main' formulation that produces a material output referneced of Orange juice.  We want to now relate to additional formulations.  How this is done?

  Now our business has been... create formulation 500001-001 with output material 5000002-001

  We have also created formulations 500003-001 and 500004-001

  When you go to the material specification > > partners fact sheet > > produced by... Open in Edit Mode

  We are not dealing with an Add button to connect the formulation 500003-001 and 500004-001

  If there is another way to do it, I didn't understand it although people have tried to explain it to me.  Could I get an idea of the stream click to get results... referenced material output with several options.

  Thank you.  Beckie

  Thanks Sherry,

  I was trying to understand the course of "add material specifications 500002 - 001 as a material output of formulation" 500003-001... It does appear to me that I could change something exit we created.  After several hours of looking at this, I found the 14 steps to the product developer.  Thank you.

• First question of optimization (material) Pro

  Hello everyone.

  I have a few questions about Adobe Premiere Pro optimization with material.

  
  

  1. What is more important for a better performance of PP - CPU or GPU?

  2. which is better for performance of PP - Intel i7 CPU with 2 hearts and hyper-foulant enabled or A10 processor AMD with 4 cores?

  Thanks in advance.

  1 CPU

  2 i7 with 2 cores + HT

  This CPU will at least install the software and allow a few very limited SD editing, nothing more. To see what you really need, watch Tweakers Page - what type of PC to use?

• Questions: various Sections of ventilation in GSM

  Current version = 6.1.0.1
  
  1. are there documents from Oracle that describes the interaction between the ventilation sections % on hardware, Formulation - production materials and trade
  2. our user wants to pull % materials first failures in formulas, raise the roll % ventilation to release material, then who all shot in trade. I can't find any information on how it is done or even calculated between the Type Spec % ventilation fields Spec type. I secretly hope there's a magic button that I don't know where he is.
  
  Questions:
  1. How are percent ventilation wound through the Spec formula-> then extended out of material?
  2. how output % hardware failures are rolled until trade % breakdown?
  3 materials Output % ventilation roll until the trade cost and include additional materials?
  3A. If Yes, how is this work?

  Here is a quick overview. Let me know if you have any other questions.

  Materials > language > trade relationship
  All the specifications of the materials must have a defined regulatory breakdown. It is a breakdown that contains at least a section of catalog component and the regulatory label.

  When these materials are used in a specification of formulation in design mode, the language specification will be to roll up the distribution based on the regulatory breakdowns on raw. This "theoretical break' will be pushed to the specification of output material.

  The hardware specifications of output must be associated with the specification of trade. The ventilation is not pushed to the trade. This information is intended to be stored on the specifications of the output only material.

  LIO is run from the output material. LIO will then use this breakdown to create a statement of the ingredient. This statement of principle is pushed to the nutritional profile of the specification of trade.

  Control of ventilation on trade
  Some types of trades allow a breakdown must be set to itself. These types of trade are used to represent the private LABEL and packaging of situations. In these situations, that a specification of formulation is not used, the formula is simply represented by a breakdown.