Question: Insertion of close captioning is not available... Why?

Similar Questions

• In Windows 8, my mail app will open my mail but it says that I am not available, why?

  When I click on the mail app it opens but does not connect to my mail. It says that my email address is not available, WHY?

  When I click on the mail app it opens but does not connect to my mail. It says that my email address is not available, WHY?

• Satellite M50 bridge-126 slot not available, why?

  A few months ago in the brochure of the satellite m50 - 126 it was specified that he was available a slot multibridge for sd cards memory sticks etc etc. I bought recently athat model a week ago and the multibridge slot is not available on my laptop. Why?

  Hello Alessio

  I understand you, but I checked your information and I find that Bridge Media Slot is optional and unfortunately you bought the device without it.

  You won't believe me, but sometimes it is according to the country where the laptop will be offered.

  Good bye

• Drive Compression not available - why?

  I just bought a new 3 drive from Western Digital Passport.

  After formatting the drive (with 16 k as the sector size) I added a number of files and folders to it. Now, I want to compress the data in the file.

  When I'm looking at the properties of this drive, the ability to compress the data in the file is hidden. Display the properties of one of the files on this drive poster option compress the file read-only data.

  Why is this happening?

  Could it be because that:

  By default, the maximum cluster size for NTFS under Windows NT 4.0 and later versions of Windows is 4 kilobytes (KB). This is because NTFS file compression is not possible on drives that have a larger cluster size.

  https://support.Microsoft.com/en-us/KB/140365

  Check the cluster size of one of your disks where compression is allowed by opening a (possibly be run as an administrator) command prompt and issue the example command depending on your C drive:

  fsutil fsinfo ntfsinfo c:

  NTFS Volume serial number: 0x5ef6d5d1f6d5a993
  Version: 3.1
  Number of sectors: 0x00000000252defff
  Total groups: 0x0000000004a5bdff
  Free clusters: 0x0000000003df19c7
  Total reserved: 0 x 0000000000000780
  Bytes per sector: 512
  Bytes per physical sector:
  Bytes per Cluster: 4096
  Bytes per FileRecord Segment: 1024
  Clusters per FileRecord Segment: 0
  The length of data valid MFT: 0x0000000007ac0000
  Beginning of the MFT Lcn: 0x00000000000c0000
  Mft2 start-up LCN: 0x000000000252deff
  Beginning of the MFT Zone: 0x00000000032b99c0
  End of the MFT Zone: 0x00000000032c61e0
  ROM ID: 43E94A18-D5EB-11E3-8ED6-806E6F6E6963

• Introduce the tool button is not available for a question slide

  When I try to insert a button using the "Insert button" icon from the toolbar, the icon "Insert button" is not available. It happened in the background and is not an option for this slide. But it is for my other slides. Can someone advise me please? I don't know what happened, but let's assume that I've done something wrong along the way.

  Thank you!

  Scott, if you look a little closer at the Lynda tutorial, what happens is that they have set up an action if the user has not replied to the question correctly. The action led them to a slide in the presentation. Note that the blade they edited after the fact (it was slide 5) was a typical shift, NOT a question slide. Thus, the option was there to insert a button.

  See you soon... Rick

• Commercial DVDs do not play on MacBook Pro.  "Not allowed" and "Supported disc not available" is displayed.  DVD plays normally when inserted in a different drive.

  MacBook Pro (15 inch, early 2011) / 2 GHz Intel Core i7 / 8 GB 1333 MHz DDR3 / OS X El Capitan Version 10.11.6

  DVD Player Version 5500.66 / Build 5,560 (2)

  When commercial DVD (NTSC) inserted in the MacBook Pro DVD Player error messages "forbidden" and "Supported disc not available" are displayed when I tried to play the DVD.  When the DVD was removed from the MacBook Pro and inserted into a different DVD player, it works normally, then the DVD was apparently not the problem.

  Your help is appreciated...

  Delete ' ~ / Library/Preferences/com.apple.DVDPlayer.plist ' and a DVD player or reopen could solve the problem.

• Netflix questions - this title is not available to watch instantly

  Hi all, hope you can help...

  I have problems with my netflix on Apple TV (Gen 3) app.  Last night it worked fine but since this morning all that I get is "this title is not available to watch instantly. Please choose another title"on every single video, I try to view.

  Ive tried rebooting / logging in and out / disconnecting / refresh network settings / etc and nothing seems to work. Netflix works on macbook, imac, iphone... it's just to get the question on the Apple TV, and I have no idea how to solve this problem.

  If anyone has had this problem and know how to fix?

  Thanks for the tips

  Make sure that DNS is set to automatic (network - general - settings)

  Restart Apple TV

• TrayApps Message - the component you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the TrayApp disk and click on 'ok '.

  Original title: TrayApps Message

  I get a message, "TrayApp" - the component you are trying to use is on a CD-ROM or another removable disk that is not available.  Insert the TrayApp disk and click on 'ok '.

  Hi BobKern,

  Follow the steps listed in the article mentioned below to solve the problem:

  Resolving MSI startup errors

• "The feature you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the disc "TrayApp".

  OT: TrayApp disk?
  I get a message after my computer starts "the component you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the 'TrayApp' disk then I have another box that says please wait while the window configures TraApp. They're going away the screen, I'm sure it's something on my beginning of preety menu up which should be removed, but don't know what it is. Please can someone help?

  Hi sandirose,

  1. using HP printer?
  2. don't you make changes to the computer before the issue occur?

  TrayApp disk is a HP printing software, I suggest you perform clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

• After I close my browser IE 9 and return to the office, my office programs are not available.

  After I close my browser IE 9 and return to the office, my office programs are not available. I have hover over a program and click, nothing happens for a few minutes... On the other hand, the taskbar and toolbar are all functioning normally. No other problems seem to be present.

  Thank you.

  Original title: freezing of funds

  Hello Manu,

  Thanks for the guidelines to help me solve my problem. Just to tell you that no, I have no error messages when I tried to access the office programs and Yes, I made a few changes in the pc... in the registry with Glary Utilities. That was my main concern.

  However, I tried the AUDITOR of FILE SYSTEM (CFS) and it fixed some problems.

  I also watched method 2 and did a performance using MICROSOFT FIX patch and ran that the Microsoft SECURITY SCANNER both have not reported any problems.

  Also tried method 1, no problem in safe MODE. I didn't think it was a third party program... so I decided to do a restore to an earlier date... then the problem seems to have disappeared.

  Start the pc also seems to be much faster.

  Thanks for the suggestions... I'll keep them as reference just in case...

• CC2015 - this is fixed? -Management of project including SD close Captioned files does not work

  All the world and Adobe.

  in reference to a discussion earlier, Re: project management, including close captioned files SD does not, this correction in CC2015?

  " Clip of once an element has been imported and identified as a "bearer of legend" , body does not forget that this specific clip, legend preference checked or not. ' - 29 January 2015 10:05

  How is it that PP maintains the captioning information, even if more Adobe Cloud was striped a system and then reinstalled fresh? -not the OS, just all the Adobe products.

  We have a HUGE problem where a producer/editor brought about 1 TB of SD video (subtitled TV unionized) and is now unable to do anything with any of these files, because it cannot project manage its promotions up to a reasonable size for further finishing because some how PP recalls a life that these files have subtitles.

  Once this system has wiped free of Adobe and reinstalled FRESH, the preference has been changed to NOT IMPORT legends. However, when we bring in a file which was imported earlier (before deletion), see PP of captioning.

  Where this information on the Mac? There must be place somewhere in the bowels of the BONE that is home to the UUID for every file... What's so we can blow this kind of thing and move on?

  Of course knowing that this has been fixed in CC2015 will be comforting and should accelerate the upgrade to 2015.

  If it was not treated, I guess we stay Final Cut for a little longer.

  (the name change solution is not a viable option at this time because of an entire Department that also uses these same clips for various projects)

  Thank you!

  I'm sorry that you're having trouble getting the legend carrying files to not be recognized by the app. Here are two solutions:

  RENAME THE FILE

  One quick thing you can do is to rename the file that carries the legends, and with recognition of legend turned off, then no subtitle will be analyzed in the file renamed when importing

  LAUNCH THE MEDIA CACHE FILE
  I know that another solution is to launch the media cache file.  It is located on the default VICTORY in C:\Users\\AppData\Roaming\Adobe\Common\Media Cache files on MAC by is located by default in the Users\\Libraray\Application Support\Adobe\ Common\ Media Cache files directory... There should be a .prmdc file associated with the project, close the project, .prmdc delete associated with the project. This will also eliminate recognition of the caption, if the pref is turns off

  Let me know how it goes!

• I get say error message "an error has caused Photoshop to stop working correctly. Windows will close the program and notify you if a solution is not available "." I got no notification. My old Photoshop CS5 works fine, but as I'm paying for CC2014

  I get say error message "an error has caused Photoshop to stop working correctly. Windows will close the program and notify you if a solution is not available "." I got no notification. My old Photoshop CS5 works fine, but as I pay for CC2014 I would use it. I tried to rename the "sniffer" to "snifferold" as bobmiller4002 has suggested, but the problem is not resolved. Lightroom works fine.

  Update your driver from the website of the manufacturer of the GPU video card to pick up the bug fixes that you are missing...

• Close captioning/app in CC software

  Is there any part of CC apps that offer close captioning features? I am hard of hearing and really need help to understand what is being taught.  Someone once told me they thought one of the Adobe app/software can close videos of legend. I use LR and PS and I have tutorial videos for both that I really want to be able to use to help me learn.

  I'm not really sure what you're looking for. Captioning would mean that the subtitles are incorporated or are available as sources external text and are rendered during playback in the video player. There is no magic software which can add such things for a video if it has not been there. There are a number of these tools like automatic subtitles own YouTube and in Premiere Pro once made an extraction of crude dialogue once (before it has been pulped), but otherwise I am afraid you will have to do. Like most come only from Adobe Tutorials in English, much to the annoyance of users of foreign language, they come without subtitles, at least as far as I know. Perhaps it would be more effective to search text-based tutorials and then ask specific questions that you don't understand on the respective forums, possibly including the PS of this forum section.

  Mylenium

• Error message: not available with this Apple ID update

  App Store displays the available updates, but after choosing "Update", the error message starts "Update not available with this Apple ID" appears. All of the applications in question were purchased with the current Apple ID.

  Mac Pro (2008), 10.11.4

  Please test after each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes. Remember, no one here is Apple or can help in problems of service the customer.

  Step 1

  If you have recently changed something in your Apple ID account (for example, the password), log out of the App Store and reconnect.

  Step 2

  A purchased app can only be updated by logging into the App Store with the same identifier Apple which was originally used to buy it. There is no way around this restriction, which applies also to the free applications. If you can not connect to help ID the buyer, remove the app and reinstall it. You will have to pay for it, once again, as appropriate.

  Step 3

  If you receive the alert when you try to update a grouped iLife application, select the shopping page in the App Store and find the application in your purchase history. If there is a button marked ACCEPT on the right, click on it.

  If you have a used Mac, bundled apps related to Apple ID of the original owner and may apply to you. Reportedly, customer service has published codes redemption to some owners of second who asked, but it is not guaranteed.

  Step 4

  If you try to update the iLife or iWork applications that were installed from a purchased DVD, or if you have a refurbished Mac purchased directly from Apple, contact App Store customer service for a redemption code. If necessary, you will be asked for the part number of the DVD.

  Step 5

  In the App Store menu bar, select

  Store ▹ view my account

  Enter your Apple ID to the command prompt. In the lower right corner of the window that opens, click the reset button. Close the window.

• Office jet pro 8600 software not available for installation mac

  Hello

  We are trying to install a jet of office pro on mac OS X 10.8.3 8600.   It keeps saying that the software is not available?

  I tried installation disc as well as the driver download from the internet.

  Hi hghlanderschool,

  I can't wait to hear that you have questions.  Can you send me a picture of the dialog box that fills the error.  Based on the information provided the procedure below can help solve the problem.  To learn more about your product, click here.

  A. remove all instances of the OJ8600 which is present in the applications software

  1 double-click on icon HD Mac desktop

  2. Click Applications, and then click folder Hewlett-Packard

  3. double click on uninstall HP

  4. click on continue when opens

  5 Select HP product to remove (OJ8600), then click on uninstall

  6. When prompted enter admin information (name of user and password)

  7. when the UI program uninstall is complete, drag all icons of the product to the trash

  8. return to the Applications and then click the Utilities folder

  9. double-click on activity monitor. Open the activity monitor

  10. under the name of process, click on any process that begins by HP, and then click on leave

  11. click on leave again.

  12. close the activity monitor

  13 empty the trash

  14 disconnect the product and then restart your computer

  B. reset the operating system printing system: NOTE: If OTHER PRINTERS ARE INSTALLED this WILL REMOVE THEM, if YOU DO NOT WANT that to HAPPEN please DO NOT COMPLETE THIS STEP

  1. choose System Preferences from the menu Apple .

  2. choose Print & Fax on the menu display .

  3 hold down the Option key while clicking on the "-" (deletion of printer). If no printer currently not added, hold down the CTRL key while clicking on the box that appears above the button "+" (add printer), and then choose Reset printing system... from the context menu.

  C. all software update:

  1. from the Apple menu, choose software update

  2 software Update checks the available updates. In the software update window, select the items you want to install, then click on install. Usually, you should install all available updates.

  3. Enter an administrator account name and password.

  4. when the installation is complete, restart the computer if necessary.

  .

  D. reinstall printer with USB cable

  1. turn the printer and the computer

  2. connect the USB cable for printer

  3. USB connection to computer

  Note: this should automatically add the printer, if it does not manually add the TI-see below *.

  4. open system preferences, and then click Print & Fax

  5. click on the sign under component printer +.

  6. click on the name of the printer

  7. click on add

  8. test the functionality

  I hope this helps!

  .

  .