TrayApps Message - the component you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the TrayApp disk and click on 'ok '.

Similar Questions

• Please wait while Windows configures FAX"... this process stops and I get another message that says:"the component you are trying to use is on a CD-ROM or another removable disk that is not available. "

  Original title: widows installation problem

  I have Windows XP Professional running on a desktop older.  I cleaned the disk and I would use it only as a 'internet '.  It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»

  The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product.  Windows Installer cannot continue. »

  This will take place two or three times at the beginning upward.  How can I prevent Windows Setup tries to install something that I do not use or do not seem to have?  I deleted any fax program, that I could find on the computer, and nothing seems to work.

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to install other applications and programs successfully?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "The feature you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the disc "TrayApp".

  OT: TrayApp disk?
  I get a message after my computer starts "the component you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the 'TrayApp' disk then I have another box that says please wait while the window configures TraApp. They're going away the screen, I'm sure it's something on my beginning of preety menu up which should be removed, but don't know what it is. Please can someone help?

  Hi sandirose,

  1. using HP printer?
  2. don't you make changes to the computer before the issue occur?

  TrayApp disk is a HP printing software, I suggest you perform clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

• Cannot install Silverlight error: the component that you are trying to use is on a CD-ROM or another removable disk that is not available.

  Original title: Cannot install siverlight wants cdrom

  When I try to install from a download of Microsoft Silverlight, I come me next survey on my screen:

  The feature you are trying to use is on a CD-ROM or another removable disk that is not available.

  Insert the disc of "Microsoft Silverlight" and click OK

  Use source:
  Installation of Microsoft Silverlight 1

  I killed the associated files of SilverLight with REGEDIT.  In Add or remove programs to audit, it has returned.

  Please help as I can't watch videos COMCAST without installed.

  Frank K.

  Hello

  I suggest you go to the link below and post your question in the Silverlight forums for help on this issue.

  http://forums.Silverlight.NET/

  Hope this information is useful.

• I get a message that indicates the component that you are trying to use is on a CD-ROM or other removable disk that do not exist insert the 'Sonic Update Manager' disk and click ok

  He reads at the top of the installer of windows message

  Hi gerardoram9160,

  1. When you receive the error message?

  2. did you of recent changes on the computer?

  3. do you have 'Sonic Update Manager', installed on the computer?

  If you get the error message when the uninstall or uninstall the program, see the Microsoft article and try the steps mentioned below.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The feature you are trying to use is on a CD-ROM... error message for WordPerfect Office 12

  I get the error message following WordPefect (R) Office 12 after starting, "the component you are trying to use is on a CD-ROM or another removable disc that is available." IIt on a Windows XP and a Dell laptop. have tried several things. What should I try? Help, please?

  Thank you

  Trey

  I get the error message following WordPefect (R) Office 12 after starting, "the component you are trying to use is on a CD-ROM or another removable disc that is available." IIt on a Windows XP and a Dell laptop. have tried several things. What should I try? Help, please?

  You let a 'no' to this error message? ("The feature you are trying to use is on a CD-ROM or another removable disk that is NOT available.")

  Apparently, you try to use a feature in WordPerfect that has not been installed.  You need the installation of WordPerfect CD in your computer's CD drive.  For more information, use one or more of the following resources:

  http://www.Corel.com/servlet/satellite/us/en/content/1152796555474
  http://Corel.force.com/index
  http://officecommunity.com/
  news://cnews.corel.com:119 / corel.WordPerfect12 (this link may not work in your web browser; if you have a news reader, configure it to use the news to cnews.corel.com server and subscribe to the newsgroup WordPerfect12)

• Receive message "Please wait while windows configures the status" and then "the component that you are trying to use is on a CD Rom, please insert". I don't have the CD. How can I stop this?

  Windows Setup status

  Whenever I start my computer, I get a series of pop-up boxes that talk about "Please wait while windows configures the State" and then the one that says "the component that you are trying to use is on a CD Rom, please insert".  I have no idea what it is, and I have no disc to put on this line?  If I hit the buttons cancel these boxes enough times to go, but it's annoying and there is notihing badly with the operation of the computer, after I get rid of the boxes.  No idea how to stop this from happening again?  I did all the steps that have been mentioned earlier and no results.  I even did a system recovery.  I don't know what to delete.  Please help thanks

  Hello

  These messages usually mean that you have a problem with the HP printing software

  Contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact HP options at the link above.

  http://h30434.www3.HP.com/

  HP's Support Forums at the link above.

• Cannot install the update from Microsoft SEcurity Essentials KB2691905 get error the component you are trying to use is on a resource unavailable network

  JOriginal title: can't locate epi.msi

  When you try to install the update of security essentials KB2691905 I get an error message saying "the component you are trying to use is on a network unavailable resource."  «.. . or enter a different path to the folder containing the installation package 'epi.msi' "

  Hello

  Method 1: Install the latest version of the installer

  See the following site:

  Windows install 4.5 Redistributable

  http://www.microsoft.com/en-us/download/details.aspx?id=8483.

   

  Method 2: Clean boot

  See the following site:

  http://support.microsoft.com/kb/310353.

  Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.

• Help with service pack 3 to install - "" the component that you are trying to use is on a CD-ROM... "."

  original title: help with service pack 3 installation

  I get the message to update and install service pack 3, but every time I try it can not be installed. "the component that you are trying to use is on a CD-ROM or removable disk that is not in vain. Insert the microsoft excel 2002 disc, and then click ok' I have no disk, what do I do

  Hello

  Try to install the stand-alone version of the Service Pack by this link:

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

• Error: "the component you are trying to use is on an unavailable network resource.

  Original title: I can not use my Microsoft Office software or install the updates HELP

  How can I fix my installation file? This is the error message: the component you are trying to use is on a network unavailable resource. Click OK to try again or enter a different path to the folder containing the installation package "SolutionCenter.msi" in the box below - and then in the use source: box is C:\DOCUME~PRAIRI~1LOCALS~1\TEMP\7z(can't see the rest of the file name)

  Hi KeathaMcLeod,
   
  -What is the program you are trying to install?
  -Remember to make changes to your computer after that this problem started to happen?
  -What version of Office products you use?
   
  If it is the Office 2003 program that you use, see the following article and follow the steps to resolve this problem:
   
  Error message "the feature you are trying to use is on an unavailable network resource" when you click a feature in an Office 2003 program
   
  If it is a different version of the Office program, post back with details to help you better.

• can not install the latest version of itunes, get the error msg: "the component you are trying to use is on a network unavailable resource."

  Can not install the latest version of iTunes.  Everytime I try I get this error msg: "the component you are trying to use is on a network resource that is unavailable."

  Then I click OK and get this msg: could not find the path C:\users\my name\appdata\local\apple\apple software update\itunes6464.msi.

  I need to sync my new iPad pro and because used to synchronize requires the latest update, I have my laptop but I never have syncd my ipad with this computer and if I try to backup if I agree to erase everything on my device and sync with the laptop.  Of course, I don't want to do what I want to see everything on the NEW ipad from the old version.

  I went through the troubleshooting and found a solution, but when I had finished making all this trouble report said, there was a pesky itunes shortcut file on the left and I can not delete this shortcut, regardless of how many times I try.  If I can't remove it, the Installation will be terminated.  How can I delete this file?

  For general advice, see troubleshooting problems with iTunes for Windows updates. Start by Missing MSI errors .

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Microsoft Visual C++ 2005 Redistributable and says that the component you are trying to use is on an unavailable network resource

  Vcredist.msi
  I have Windows XP and just upgraded my Zone Alarm Internet Security Suite to the new version. The parental control available in it says they are available but not installed. I click on install and a window will appear titled Microsoft Visual C++ 2005 Redistributable and says the component you are trying to use is on a network unavailable resource. I need help to understand this.

  Hi brianr30,

  I suggest that you download the latest version of the Microsoft Visual C++ Runtime manually and check to see if it helps.

  How to get the Visual C++ 6.0 runtime components

  http://support.Microsoft.com/kb/259403

  If you're still having problems, then you will need to contact ZoneAlarm support for assistance.

  https://support.ZoneAlarm.com/

• Error "the component you are trying to use is on a network resource that is unavailable, click ok to try again or enter a different path to the folder containing the installation package ' status.msi.»

  What is an installation package "status.msi", it doesn't let me access my command to scan on my HP officejetJ5780 all-in-one.  It indicates that the component you are trying to use is on a network resource that is unavailable, click ok to try again or enter a different path to the folder containing the installation package ' status.msi.  It's also prevents me to access my backup disk.

  Original title: status.msi?

  I restored my computer to a period of time, two weeks earlier and which seem to fix the problem, somehow.   Thank you

• While using Windows Media Gallery, error message, the component you are trying to use is on a network resource that is unavaialble

  I used to get jump up while working on my system. Details of the pop up windows:

  «Pl waiting windows configures media gallery»

  If I have to cancel this once again it displays:

  "The feature you are trying to use is on a network resource that is unavaialble.

  -Click ok to try again or enter a different path to the folder that contains the installationpackage M.G. modulesX64.msi in the box below

  -c:\users\admin~1\appdata\local\temp\{2ACCE2B2-D3EF-430A-B766-8EA930489CCE}\{DD88F979-FA58-41AC-980-A6E1A82B61D9}\

  -An installation package for the product M.G. cannot be found. Try the installation again using a copy valid x 64 MSI installation package M.G. merge module.

  I already uninstalled the program Gallery media still the problem persists.

  Pl help.

  original title: how to block pop-ups «pl waiting windows configures media gallery»

  Hi Rajazc,

  It seems that the location that the software will search in the installation file has changed or disappeared. You can follow this path that he needs? When you re-installed, did you use the same exact path? You completely uninstall before you try to reinstall? Try this: uninstall the software, do a clean boot, and then reinstall making sure that you set in a different way.

  Here is a link that has a portico on the issue that you are running in (just another program) to watch what you deal with:

  http://support.Microsoft.com/kb/828376
  hope this helps,
  B Eddie

• Error: "the component you are trying to use is on an unavailable network resource" when tried to open iTunes

  Original title: Windows Installer error/problem with shortcut

  Hello one who reads this. I can't uninstall or remove itunes and quicktime. I was given an iphone today and I wanted to add music. so I connected the phone and waited on itunes to bring up, but it never did. I used itunes like 3 days ago, and it worked very well. now when I try to open itunes, a windows installer message pops up saying that the component that you are trying to use is on a network unavailable resource. someone at - it help him?

  Hi JohnnyDarko,

  Try these steps and check the result.
  Step 1: Reinstall iTunes.
  a. see http://support.apple.com/kb/ht1925
  b. Download iTunes and install it.

  Step 2: If the problem persists, restore the computer to an earlier time
  a. Click Start, type system restore in the search programs and files.
  b. click on the system restore, click Run as administrator.
  (c) in the System Restore dialog box, click Next.
  d. Select a restore point from the list that is dated before the problem and then click Next.
  e. on her confirm your restore point window, click Finish.
  f. check if the problem persists.

  See What is system restore?

  Step 3: Reinstall iTunes and check the result.

  For further assistance, please contact Apple support: http://support.apple.com

  Visit our Microsoft answers feedback Forum and let us know what you think.