Question of architecture including SAY, refinery incoming and to PDF Converter

Similar Questions

• I can't buy it and download of PDF converter

  Can you help me to buy and download Pdf Converter my e-mail is [deleted]

  There are different ways to convert PDF files:

  • Adobe Acrobat
  • CreatePDF
  • ExportPDF

• Hello, I have a question, if I already paid for Adobe Creative Cloud (including all Adobe Applications) and I installed it in a desktop computer in my office, I might as well install in my laptop at home? Or should I uninstall it in the transfer Office

  Hello, I have a question, if I already paid for Adobe Creative Cloud (including all Adobe Applications) and I installed it in a desktop computer in my office, I might as well install in my laptop at home? Or should I uninstall it in the desktop to transfer it to my laptop? Thank you

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  -An individual account is for one person and may not be shared with anyone else

• Having a problem with the message saying (not answer) and computor lock, answers please

  Problem with computor saying "not responding" and lock, any ideas please.

  Problem with computor saying "not responding" and lock, any ideas please.

  Provide you any other information.  You have to give to get when it comes to troubleshooting.

  Given that don't even give you an operating system - replace the defective hardware.  ;-)

  What specific operating system you use?  Include the service pack level and architecture (SP1, SP2, SP3... (32 - bit or 64 - bit?)

  I'm guessing that has happened since the first day - of a lifetime of computers - what happened between he works and does not?  New software installed?  All new hardware installed or attached?

  Did you * nothing * to try to remedy the situation?  If so - what?

  Be specific.  Ignore the cameras, microphones and remote viewing software, we have installed in your home, clothing and computer.  Pretend that we do not understand what you do and save it for future reference.  * smile * (should be easy - we don't have).

  Stuff in general, you could do (as long as you use a Microsoft Windows Operating System after the year 2000...)

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Update your drivers for hardware devices from the manufacturer themselves - do not use the built-in features of Windows. If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• FOLLOWED THE INSTRUCTIONS INCOMING AND OUTGOING STILL NOT ABLE TO SEND AN EMAIL.

  QUESTION BY E-MAIL:

  FOLLOW-UP iMAC SETTINGS for ROGERS.

  THE SETTINGS OF MAIL SERVER INCOMING AND OUTGOING SERVER AS WELL. ALWAYS IMPOSSIBLE to SEND the incoming SERVER icloud MAIL READS. PO4, map.mail.me.com and outgoing readings ROGERS (OFFLINE)

  ISTHERE A WAY TO CHANGE THE SETTINGS? THANKS ELLIE

  OS X Yosemite 10.10.5

  Serial number. D2 * 8J7

  It is difficult to read.  Please use the top & bottom case.

  Please provide a link to the instructions.

  Please provide image on the screen to how you have configured these settings.

  -------------------------------

  How to show an image on the screen.  Avoid personal identification.

  on Mac, you do:

  Command + shift + 3 will have the entire screen.  You hear a click.

  Command-shift-4 lets you decide what to take.  Changes of mouse pointer. Move the mouse to the upper left corner of the image of desire.  Press and hold the left key of the mouse to start the image.  Drag the mouse to lower left where you want to stop the image.  Mouse release.

  You will get a .png file to the desktop image.

  On the entrance sign of the forum, you will see the camera icon.

  

  Click on the camera icon.

  another window will appear.

  Make sure you have selected the in your the computer tab.

  Click the Browse button

  A Panel to open the file.  Select the file.

  After selecting a file, I have this screen showing.

  

  You need to click Insert Image.  You may need to scroll down to see the button to insert an Image.

  R

• Computer Mangement.lnk unspecified error. Please help me by saying its cause and what could be the solution for it.

  Computer Mangement.lnk unspecified error. Please help me by saying its cause and what could be the solution for it.

  Clear the error on windows server 2008. All of the above files are locked.  We maintain active directory on and it is also not working.

  Help, please.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department for further explanations.

  I hope this helps.

• Outlook express 6 rebounds all incoming and outgoing messages on Wndows xp.

  I posted this question earlier, but apparently to the wrong forum.  I deleted all the messages in my nbox, sent items, deleted projects... All incoming and outgoing messages are bounced back indicating that the bytes are at their limit.  I don't know if the messages are stored on my server or not.  Don't know how to check.

  Is there a solution for this?

  In addition to the other suggestions, try to go to the file. Identities and setup a new identity.  Add your e-mail account to this identity and see if it will download messages and delete what is on the server.  The files can be corrupted in the old identity and may not delete messages from the server.  You can also contact your provider and e-mail them to check on errors.

  Steve

• Dell XPS on MS XP running several windows to include station media TV and internet games offers a pixelated display gradually and freezes

  Dell XPS on MS XP running several windows to include station media TV and internet games offers a pixelated display gradually and freezes. restart clears but reproduces

  I love my Dell and use media station to watch cable TV while playing games on the internet (pogo.com) sometimes I play solitaire spider OEM.  I think that, especially in the afternoon, my image of the desktop will get pixelated (small hyphens in contrasting colors) gradually fill in top to bottom.  Initially, I thought this might be the steganography, but found no references.  then I noticed that the pixelation in contrasting colors began to appear on the screen of the media station into strips about 6-8 rows of red, green and blue and pulsed in time for audio.  do not have audio video storage but this started to happen when Comcast went digital, so there may be a link?  spoke and troubleshoot-done with the line paid expert who suggested Speedfan as a diagnosis for my GPU graphics processing unit.  When I reboot, everything is fine so it happens with increasing frequency.

  Here is a link to the Dell site where you can get a manual that has a few general cleaning instructions as... eliminate dust, etc.
  http://support.Dell.com/support/downloads/index.aspx?c=us&CS=19&l=en&s=DHS

  Here is a link to some general purpose cleaning of ideas to make sure your system is found good circulation:

  http://www.bleepingcomputer.com/tutorials/tutorial118.html

  Even if your system is physically disconnected from the power supply and clean, if you can remove your slot NVIDIA card and reinsert the card safely in the same dwelling, which will ensure that you don't have a loose connection.  Which may require a screwdriver, so if you're not uncomfortable with it, maybe you can find someone to help you.

  Your display NVIDIA GeForce 7300 driver has also passed HIM.

  Your msinfo32/video info says that currently, you have this:

  6.14.12.6658 driver version (it's NVIDIA version 266.58)

  The current version of the driver for the GeForce 7300 is 270.61

  The best way to reinstall the NVIDIA software is to visit NVIDIA support web page and let your system and recommend the best software for your system or that you get the right version of the software on their web page and download the latest package of video driver for your system software and install it yourself.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the link to the support page NVIDIA for the scan:

  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  Let online to take a look at your video system scanner them and see what he suggests for drivers and consider their analysis if they offer a new pilot.

  Download and install the recommended driver and reboot your system and check the version of the driver installed again.

  If you post the msinfo32/video info once again, we can help you to ensure that the new driver is installed.

  Is not not a audio/videophile, I'm not sure if your codecs required to make day or no MS maybe someone else can help you with this part, but should your video driver update.

• Monitor PC BOOT WONT says no entry and turns off

  As I turn on my computer I hear all the fans walk n stuff but the monitor says "No Signal" and it goes black... However, ive tried to remove the battery for awhile and cleaned every part near the graphics card too... I hear no beep... Help, please

  Hi Sushil,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. What is the brand and model number. your computer?
  2. You did it any significant hardware or change software on the computer before this problem?

  According to the error message and you hear no beep of your system, it seems to be a hardware problem with the system unlike a problem starting Windows. So, I suggest you to contact the material corresponding to your dedicated support system model.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• The FTP.EXE program included in Windows 7 and Server 2008 help the PASV Mode connection

  What is the FTP.EXE program included in Windows 7 and Server 2008 helps to connect in PASV Mode?

  I ask because I had a strange experience with her. First, I will mention that I did hours of research and found many articles stating that it does not work in XP/2000/Server 2003, but I found nothing for Windows 7 or Server 2008.

  I found some people who kept him at work and others who could not. I tried with Windows Firewall turned off and will be on and firewall rules created. Others said it is not supported and that I should use a third-party FTP client. I could make it work in Internet Explorer and Windows Explorer. I am well aware of the situation these options in Internet Explorer.

  Here are the best real, I could run from the command line on my PC Windows 7 (32 bit), but not on Server 2008 64 bit.

  Now, before someone comes and asks me to check the firewall, I want to mention that I tried more than five clients of third-party FTP Server 2008 and they all worked perfectly. In addition, from the same Server 2008 it worked fine in IE and explore.

  On Windows Server 2008:

  FTP client blocked on: 150 opening data of channel for the directory list.

  Windows 7:

  C:\Users\wxk1>Systeminfo | b/findstr/c: "Name of the OS" / c: "Version of the OS.
  Name of the operating system: Microsoft Windows 7 Enterprise
  OS version: 6.1.7601 Service Pack 1 Build 7601

  C:\Users\wxk1>FTP ftp.secureftp - test.com
  Connected to ftp.secureftp - test.com.
  220 - FileZilla Server version 0.9.39 beta
  220 - Written by Tim Kosse (* address email is removed from the privacy *)
  220, please visit http://sourceforge.net/projects/filezilla/
  User (ftp.secureftp - test.com:(none)): test)
  331 password required for test
  Password:
  230 logged on
  FTP > dir
  200 port command successful
  Data channel opening 150 to the directory list.
  -r - r - r - 1 ftp ftp bookstore.xml 1471 25 June 2007
  -r - r - r - 1 ftp ftp 279658 25 June 2007 hamlet.xml
  -r - r - r - 1 ftp ftp 80641 25 June 2007 hamlet.zip
  -r - r - r - 1 ftp ftp 2164 japanese.xml 25 June 2007
  -r - r - r - 1 ftp ftp 0 July 3, 2007 the new text Document .txt (2)
  -r - r - r - 1 ftp ftp 0 3 July 2007 new document texte.txt
  -r - r - r - 1 ftp ftp 4677 25 June 2007 nutrition.xml
  -r - r - r - 1 ftp ftp 8463 pigs.xml 25 June 2007
  -r - r - r - 1 ftp ftp 7581 25 June 2007 plants.xml
  drwxr-xr-x 1 ftp ftp 0 subdir1 June 25, 2007
  drwxr-xr-x 1 ftp ftp 0 subdir2 June 25, 2007
  226 transfer OK
  FTP: 697 bytes received in 0.01Seconds 46.47Kbytes / s.
  FTP >

  Also, I do not install a server FTP PASV will be IIS 7 or anthing like that, just try to connect to a server FTP PASV. Here is the test server that I used:

  http://www.SecureFTP-test.com/

  Type	FileZilla
  Address	FTP.SecureFTP - test.com
  Opening of session	test
  Password	test

  Details on using

  Chilkat provides this FTPS test account for all those wishing to test the secure FTP client functionality. You can connect to ftp.secureftp - test.com, connect as a 'test' with password 'test' and download that all files present on the server. The "test" account can also retrieve entries in the directory. There is, however, no downloading files on the server.

  Hello

  The question you posted would be better suited to the Technet community. Check out the link and ask the question.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows7 when I migrated to the Working Group at the field of the firewall has crashed. And also it does not show in the services. In the firewall rules of incoming and outgoing traffic is missing.

  In my windows7 when I migrated to the task force to the area, crashed by the firewall. And also it does not show in the services. In the firewall rules of incoming and outgoing traffic is missing.

  Hello arjunpottekkad,

  It is disheartening to know that have problems you with the firewall. As I understand it the incoming and outgoing traffic rules are missing from the firewall.

  The question you posted would be better suited in the TechNet Forums . I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you are having problems with the Windows Firewall or any other problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Question/design architecture with best practices?

  Question/design architecture with best practices?
  
  Should I have separate Web server, weblogic application and IAM?
  If yes that how this time will communicate, for example can I webgate on the server that will communicate to each other?
  Any reference to decide how to design and if I have weblogic separate one for enforcement and one for IAM that how session management will take place etc.
  
  How is general design happens IAM project?
  
  Help appreciated.

  I have a business web application deployed on weblogic1 and OHS1

  deploy webtier on this OHS1 to protect the resources on OHS1. webtier will be recorded at OAM (where will be able to communicate with OAM)

  I also IAM deployed on weblogic2 & OHS2

  IAM components have weblogic. then ok. But you don't need to ohs2 here, unless your application itself requires OHS for hosting. But here, you mention that it is fair to IAM - so no need to OSH here. IAM installing requires weblogic.

  wanted to know where should I create provider (weblogic1 or weblogic2), and install webgate (OHS1 or OHS2 or both)?

  I hope it is clear now. If this isn't the case, query post for what is not clear.

• Please incoming and outgoing Setup mobile mail server config

  MAILBOX: incoming and outgoing ORACLE server, the value of the E-mail port please

  MOHAMED ABDENOUR AMRANI SAHIB says:
  I am not able to access the forum Archives fruit. LOCKED FILE. Help, please

  I don't understand.

• Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

  Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

  Occasionally, it may restart because something was wrong. It is not a problem unless this happens frequently.

• How to change my password and my incoming and outgoing mail servers

  Hello, I used Outlook Express for years and I know how to set up 'everything' I need in the pages of parameters because their settings pages are all "logical" with everything out in the open.

  However, Thunderbird "cache" their settings behind the buttons and confusing forms.

  There are many tutorials that explain how to set up Thunderbird since the beginning and show how to set up a new e-mail account. But I was not able to find a tutorial on how to change my password "after that" I have been using Thunderbird for a while.

  I'm also no way to change the incoming and outgoing servers. For example, I changed my hosting at another Web host and I need to use the new the new hosting company e-mail servers and I can not anywhere, see any tutorials that cover current activities or day by day with Thunderbird.

  Can you please change your screens of settings for Thunderbird easier for new people to find these normal and necessary?

  Also can you please point me to a tutorial that shows me how to change my password and change my incoming and outgoing servers?

  Thank you very much!

  Edward

  You can change your settings to

  • Thunderbird > tools > accounts settings
  • After clicking the account settings > you get a pop up window
    • Left hand side you can see the list of emails that you configured
    • Same left panel last option is the outgoing server settings

  Thunderbird is the customer between the user and the mail server. She never recorded your personal membership. If you want to change your password, go to your mail server and change it via browser