Question of clone Virtual Machine
When you clone a virtual machine by using the vSphere 4.1 client and it's personalization of the guest operating system, and he said "customization Windows resources are not found on the server.", what it refers to? The server vCenter, the local PC or the VM I'm cloning?
Using the stand-alone converter, I know put the correct sysprep files in the user folder, but I don't see how that comes into play here.
digitlman77 wrote:
When you clone a virtual machine by using the vSphere 4.1 client and it's personalization of the guest operating system, and he said "customization Windows resources are not found on the server.", what it refers to? The server vCenter, the local PC or the VM I'm cloning?
The host OS vCenter. You must place the sysprep files in the appropriate location.
http://KB.VMware.com/kb/1005593
Tags: VMware
Similar Questions
-
Question: We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication.
Version for esxi: Patch 5.1 level 7
Virtual center of version 5.1
Source of storage - IBM v7000
Destination storage - Hitachi
Questions:
Events of breach RPO
Consolidation for the VM disk failure
Delta abandoned events
Time change events
NTFS error and warning (event ID: 137, 57)
RDP disconnect and ping does matter
Standby error
Volsnap error
Stop the server and offline issue
Install vmtools emits automaticallywell, in this case, we need to disable the standby of the end of the replication.
So that everything in triggering replication does not trigger the snapshot of the suspension.
Then test the if you get these errors.
-
How do the automatic deletion script clone virtual machines
Hello
We use the VM data recovery to clone virtual machines. We would like to clone some VMs on weekly basis but we need a script (or automatically) to remove the existing cloned VM automatically. VDR not clones a virtual computer when there is already a clone of this virtual machine.
The easiest way is to use the Windows Task Scheduler.
See runs a scheduled job PowerCLI Alan post.
-
vCenter Orchestrator - Clone virtual machine with a name like VM_Date
Hello
I have try the Workflow "Clone virtual machine, no customization. It works very well but I would like to change settings (cloned virtual machine name), but I don't know how I could do this.
I would put the cloned vm name: vm_date like this CHDCVSCT0001_31_08_2011.
Is someone can help me?
Thanks in advance
Good day
Best regards
Christophe Simond
No prob. Scripting Self is always the best way to learn
-
Problem with script to clone virtual machines
Hello
I created a script to clone virtual machines on a regular basis around a method posted by LucD and Simon Long here or on their blogs.
Here is the part that does the actual work:
$VM = get - VM $Machine.MasterVM
# Send Email of departure
.\startmail.ps1
# Create new snapshot clone
$CloneSnap = $VM | New-Snapshot - name "Instant Test" - Quiesce
# Get the managed object display
$VmView = $VM | Get-View
# Get the managed folder object reference
$CloneFolder = $VmView.parent
# Construction specification clone
$CloneSpec = new-object Vmware.Vim.VirtualMachineCloneSpec
$CloneSpec.Snapshot = $VmView.Snapshot.CurrentSnapshot
# Make the linked disc specification
$CloneSpec.Location = new-object Vmware.Vim.VirtualMachineRelocateSpec
$CloneSpec.Location.Datastore = (get-Datastore-name $Machine.BackupDS). Extensiondata.MoRef
$CloneSpec.Location.Host = (get-vmhost-name $Machine.BackupHost). Extensiondata.MoRef
$CloneSpec.Location.Transform = [Vmware.Vim.VirtualMachineRelocateTransformation]: sparse
$CloneName = "$vm - BU - $date"
# Create clone
$vmView.CloneVM ($cloneFolder, $cloneName, $cloneSpec)
# Write newly created VM to stdout as confirmation
Get - VM $CloneName
# Remove snapshot created for clone
$Snap = get-Snapshot - VM (VM-Get-name $Machine.MasterVM)-name $CloneSnap | Remove-Snapshot - confirm: $False
#Send full email
.\endmail.ps1I want to use in an environment composed of 3 servers ESXi 4.0 with a local data store each. This works well in my test environment, but not in that productive.
Here, I get this error:
Exception, calling 'CloneVM' with '3' or the arguments: "it was not correct to specified parameters.
Spec.Location.pool ".
C:\script\vm-backup\backup.ps1:98 char: 18
+ $vmView.CloneVM < < < < ($cloneFolder, $cloneName, $cloneSpec)
+ CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)
+ FullyQualifiedErrorId: DotNetMethodExceptionIn a comment on his blog, made Simon refers to an error in the data store, but it seems very well here.
By comparing the values of the characteristics to those of my testbed everything looks good, too.
Does anyone of you can tell me where to look for the problem?
Thanks in advance
Christian
That's correct, 1 by Server default resource pool.
You can do
Get-ResourcePool-name resources-site (Get - VMHost - name MyEsx)
to get the default pool for a specific ESX Server
CAB, you add a line in your original script
$CloneSpec.Location.Pool = (get-ResourcePool-name resources-site (Get - VMHost - name MyEsx)). Extensiondata.MoRef
This should be the correct MoRef
The message seems to indicate that the target VM already partially exist.
Remove it before you run your script once again.
-
Clone virtual machine configuration
Hello
I have a requirement to clone a single copy of the configuration of the VM in a datacenter to another data center.
We essentially use HUR to do a replication of the storage of a domain controller to another. Once replication is complete and has been shared, we climb the target LUN with Signature data warehouses are ' option and the same data store name. With that, most disk mappings is lost in particular on the virtual machines with large number of disks and we eventually remove these drives and do a manual mapping with the same SCSI controller than source VM.
My requirement is I want to automate this process and for which I need to capture details first source below and then reproduce the same destination VM.
Source VM
VMDK path with data store name
VMDK mapping to each scsi controller.
The VMDK disk size
Mappings of RDM
SCSI controller shares (if any)
With the above information, I am looking for script map VMDK disks with the same data store name and the same number of SCSI controller to destination.
If someone could help me, that would be great and I will save a lot of time spent on manual mapping.
Thanks in advance.
The following script to retrieve the info you would need for step 1.
Get - VM | Get-hard drive |
Select @{N = "VM"; E={$_. Parent.Name}},
Name,CapacityGB,filename,@{N='Datastore'; E={$_. FileName.Split(']') [0]. TrimStart('[')}},
@{N = "SCSIid"; E = {"{0} ': {1}" f (& {$script: ctrl = Get-controller SCSI - HDD $_;}) "} $script: ctrl. ExtensionData.BusNumber}), $_. ExtensionData.UnitNumber}},
@{N = "Shared SCSI"; E = {$script: ctrl.} BusSharingMode}},
@{N = "RDM"; E = {if($_.) DiskType - match 'Physical') {$_.} ScsiCanonicalName}}}
-
Impossible to clone virtual machines to VSAN datastore
Hi all
Whenever we try to clone a virtual machine using vCenter vSAN not store data to the vSAN data store fails with the following error.
File /vmfs/volumes/540024e7-2d8bb59e-0bef-40a8f0305c2c/blr7-dhcp-1/***.vmdk not found.
It is a cluster of vSAN 3 node with 1 * 2 SSD * magnetic disk by the configuration of the node.
! 0 gig uplink connected to vDS with one vlan separate tag group of ports (Distributed Switch). Multicast IGMP snooping is enabled on the VIRTUAL LAN that is used for the VTEP.
Storage strategy is: tolerate 1, band 3, 70% cache read
Storage strategy using 3-band
Cluster shows also in good health
~ # esxcli vsan cluster get
Cluster information
Enabled: true
Current local time: 2015-01 - 05 T 14: 33:05Z
Local node UUID: 54a7b9fa-afde-3f59-1d67-40a8f0305c2c
State of the local node: BACKUP
Health status of local node: HEALTHY
Cluster under master UUID: 53e07d1e-4154-1e32-1cc6-40a8f0305c68
Cluster under backup UUID: 54a7b9fa-afde-3f59-1d67-40a8f0305c2c
Cluster under UUID: 5276ec11-3024-d7e5-6696-cb2b47017814
Cluster under membership entry revision: 2
Subgroup Member UUID: 53e07d1e-4154-1e32-1cc6-40a8f0305c68, 54a7b9fa-afde-3f59-1 d 67-40a8f0305c2c, 54a6abf6-9350-0741-2815-40a8f030f494
Under Cluster Membership UUID: 9f6eaa54-5573-d61e-d26f-40a8f0305c68
~ network vsan # esxcli list
Interface
VmkNic name: vmk3
IP Protocol: IPv4
Interface UUID: 1f6ca254-337e-9641-1c50-40a8f0305c68
Agent group multicast address: 224.2.3.4
Agent Group Multicast Port: 23451
Multicast Address Group Master: 224.1.2.3
Master Group Multicast Port: 12345
Multicast TTL: 5
~ # esxcli network ip connection list | egrep 224
UDP 0 0 224.1.2.3:12345 0.0.0.0:0 34586 worker spend
UDP 0 0 224.2.3.4:23451 0.0.0.0:0 34586 worker spend
Also the deployment of the virtual machine to vSAN datastore also very slow.
Could you please help me understand the issue.with cloning.
With respect,
Aju
This post should help determine the number of hosts.
VSAN part 25 - hosts much-needed to tolerate failures? CormacHogan.com
The number of disks is harder once you start adding bandwidth, because you also have to take into components witness account.
Each band will require a disc, and you increase FTT, you will need to double the number of disks you want to mirror any of the components score. And then, of course, welcome the witnesses.
-
Questions "reconfigure the virtual machine.
I noticed that some of my virtual machines have been in a constant cycle "Reconfigure virtual machine" in Vcenter. It is normally about every minute that they will come to the top in the section recent tasks. The big question I have is what this would cause when there isn't anyone else connected to do anything to these devices. Although devices always work and can be used I'm looking to solve it then its not not flooding section recent tasks. Any ideas?
Broker for connections: View 4.5
Agents of the VM: 4.5 and 4.6
ESX/ESXi Version: ESX 4.0.0 (208167)
VCenter Server: 4.1.0 (258902)
So far I have tried rebooting my brokers of the connection, restart Vcenter server, then by restarting the clients. I'll have access to customers in order to reinstall the agent and see if this might help. Someone at - he else had or seen this problem before?
Thank you
Since you are using versions 4.5 and 4.6 of the agent view you should take a look at this document.
Your problem may be due to an incompatibility of some sort. You use view 4.5 or 4.6?
-
Question: Can store virtual machines on the same drive as ESXi?
I'll be downloading the trial soon and construction of a test at home server. I see that the minimum requirements are that 80 GB for ESXi but does that mean that ESXi needs 80 GB to be run in addition to virtual machines?
I want to just prepare for the way I need to build it. Will be need ESXi on it's own hard drive must be installed, and then the other hard drives for data storage?
Welcome to the community - the best practice is to seprate the storage that you House your virtual machines are the disk that contains the ESXi software - I don't think the 80 GB will be inlcude nominal VMFS datastore but I would invest in a disk drive inexpensive in order to give you more storage.
Another suggestion to get tested as painless as possible - to confirm that the hardware you are using is supported - http://www.vmware.com/resources/compatibility/search.php
-
How to move virtual machines from one host to another without full VI and vMotion?
Hello
could you help me with a question?
I have two installed hosts with ESXi 3.5 U5, which are connected to the shared iSCSI (Openfiler) - VMs storage are installed on the storage disk. My requirement is to have a cheap solution of DR - in case of failure of a host, I need to move and start VM on the host of work. How to achieve without going through VMware Infrastructure 3.5 and vMotion?
I found this article:
http://www.virtualizetips.com/2010/04/how-to-move-a-VM-without-vCenter-or-storage-VMotion/
but RCLI needs Infrastructure of VMware ESXi does not have default CLI So, how to move VMs between hosts (of course I mean "cold" move) without byuing any additonal VMware SW? It is generally possible in my situation?
Thank you.
ARO
Danas
If the virtual machines are running in shared storage (two guests see the same storage iSCSI or NFS) then it's simple. If a host goes down, then look for the data store on the ESXi host work. Navigate through folders for each virtual machine, right-click on the VMX file and add to the inventory. You will then be able to turn on the virtual machine.
To move a virtual machine from one host to another, as long as both hosts had the same processors, you can pause the VM on the single host, browse and add the virtual machine to the inventory on the second break host and the United Nations.
If the virtual machines are on local storage, but the two hosts are connected to the same shared storage, clone virtual machines on a daily basis from local storage to shared storage. Use something like ghettoVCB http://communities.vmware.com/docs/DOC-8760 make the clone. In the case of a server failure, you will be able to browse the data store, add to the inventory on the shared storage and switch the cloned machine.
-
Best practices for backup of virtual machine.
Hello guys,.
I have a question about the virtual machine snapshot backup option.
In our environment, we use symantec netbackup and it is managed by an administrator of aid. It has implemented the process in a way where the snapshot of the virtual machine is scheduled and then the snapshot is saved in netbackup daily. Once the snapshot backup process is completed, the snapshot is deleted.
My concerns:
1 - remove the snapshot - wouldn't it increase the size of the virtual machine every day?
2 - is enough to restore the virtual machine snapshot disaster?
3. what happens if a virtual machine has a lot of snapshots?
Please help.
A snapshot (delta) file contains only data blocks that have been changed and a reference to their original location in the virtual disk Basic. Maybe http://kb.vmware.com/kb/1015180 helps to clarify this.
André
-
Automation of the Virtual Machine
Hi friends,
I have a question, I 03 virtual machines on a host ESXi 5.
For the moment that a virtual machine is running.
Can I create a rule when the first reached 75% of VM memory usage, automatically runs the second virtual machine?
I have to make it through the VMA?
Thank you very much!script
-
Deploy a new virtual machine from a template
Is there a workflow avaiable to deploy a new virtual machine from a template? I tried using the Clone Virtual Machine, no workflow customization but receive an error saying, "task"CloneVM_Task"error: a specified parameter was not correct."
"Spec.Location.pool (name of the dynamic Script Module: vim3WaitTaskEnd #20).When I use a template as a source of VM.
I can't find any documents pointing to the deployment of the model.
Hello
It's the right workflow, but you must provide a pool of valuable resources for this workflow. If you do not resource pools, it can be shown in a vCO to root in the inventory (vCenter does not work).
Christophe.
-
Live cloning of virtual machines to ESXi ESXi
Hello!
We received a request for a project of construction of a recovery after disaster for their ESXi host. They have a robust with local disks server and another identical that they want to use for this purpose.
So what they want is direct cloning VMs from Server A to Server B, so if the server goes down, virtual machines can be started from Server B and times of work.
They do not have a SAN/NAS solution that we could use to share images.
So does anyone know if it is possible to create a vcli script or a direct clone virtual machines from the hard drive of the server A to Server B's hard drive so that they would work from Server B.
Best regards, city
Salvation city,
Welcome to the forums.
If your hosts are connected to a vCenter, you can script or plan an operation clone from one host to another. Without vCenter, it's more complicated... You can try the script of a VMware Converter operation or the export of the FVO. There is also the old backup / restore solution.
Good luck.
Concerning
Franck
-
Cloning a virtual machine with 2 hard drives!
Hi all!
I ran into a very annoying problem. I'm trying to Migrate/convert virtual machines to a host in the CR. Each virtual machine has 2 hard drives which are located on 2 different data stores. When I try to migrate or to clone virtual machines from the host on my Cluster I get an 'error of operation period.
After scratching my head for a while, I discovered why. The virtual machine have 2 hard drives on 2 different data stores. Both flat.vmdk files are called eponymous because they are on different data warehouses (TTDC001.vmdk). I created a VM test on the cluster with 2 hard drives and flat.vmdk flies are named TTDC001.vmdk and TTDC001_1.vmdk.
So my conclusion as to why I get "Opération Timeout Error" is that VC trying Migrate/Clone to the virtual machine but is mistake because his attempts to migrate/Clone 2 hard files with the same name!
Can someone give me some pointers as to how I can get around this? I am currently copy the file hard 2nd to my deskop from the data store and rename it then copy him on the new cluster data store to see if it works as you cannot rename the file hard in the data store. It just seems long way round to migrate virtual machines with 2 hard drives, and I don't even know if it works!
Please help! :|
Andy Hughes
Andy of the evening,
I do it well. Thank you for asking.
So if I'm reading correctly it seems that you are trying to clone a virtual machine from a stand-alone host to a host that is part of a VMware Cluster. When you do this you get a network midway through the copy error. Is this correct?
Can you confirm how fast is connected to the Service Console between the two servers? For this kind of work I would recommend making them run at 1000/full, assuming you're not already. Could you also post the entire message that you get when the clone fails.
Kind regards
Glen
Maybe you are looking for
-
I can't have my Ip (5s) when I update iOS 9.3 because have an apple ID may be used hiden activity. I'm very very sad
-
Formatting and reinstalling Windows without the recovery CD
I don't have access to my recovery cd as I am currently overseas and I am trying to format and reinstall windows. What would be the best way to do this? The recovery CD is totally part of reinstalling windows? I don't want to just do the reinstall an
-
Last screen family vista premium causes the update of death blue
I am currently under the 64-bit version of vista Home premium, SP 1. It has worked wonderfully for the sixth month, until yesterday. The automatic update downloaded 3 updates, I installed before stopping. After rebooting, my computer allowed me to
-
I had a problem of vmware that caused about 30 mV to restart & you know what this means for Appassure... new bases for all. Is there a relationship I can run to see what servers has indeed created a new base in the past X days? THX
-
Smartphones blackBerry - no locking of the keyboard help
Hello I just updated my software for the v50.0.862 (Platform 5.1.0.175) and now I don't have a keypad lock icon. Any ideas? Thank you very much