Question of Control Center

Similar Questions

• Other ways to access to the control center

  I'm a quadriplegic and can't touch to the iPad, but I use the switch access. That leaves several things that I can't because you have to do some kind of shot or another action.

  I was trying to find another way to bring up the control center, since I can't slide with my finger. I actually found a several months ago and put in a recipe under switches, but something went past and disappeared and I don't remember what I did. Any ideas?

  Also, I need to be able to implement all applications running in the background that must be killed. I can't double click on the home button. It any suggestions?

  I use the command with 2 switches. If that helps anything.

  Thank you! -Doug

  Hello WDMaples,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to be able to access all the features of your iPad, and I have an article that should help you to implement the control you are looking for with your switch access. This article should help guide you through setting up the recipe to replicate hitting swipe and double click on the home button.

  Switch control: Basic Techniques

  If you experience any problems or have any questions, please let us know. The entire community is here to help.

  -Best regards-

• VAIO control center - access point problem

  I can't share my vaio control center network. It is passive. But I do can make adjustments in other menus such as keyboard lighting, battery maintenance, charging usb. Only the network menu does not work. Why is this?

  My model: sve15129cvb

  Thanks in advance

  

  Hello Burak,

  SVE15129CVB is part of the Asia-Pacific. See the following steps to resolve the problem:

  1. Activate the network wireless in the computer first:http://windows.microsoft.com/en-IN/windows-8/cant-find-wireless-network
  2. Reinstall the VAIO Control Center, after using VAIO Care.
  3. Press Windows + Q to open the search box.
  4. Type VAIO Care and click on enter key.
  5. VAIO Care > Advanced Tools > restore and Recovery > reinstall applications and drivers.
  6. For more information about how to contact a Sony facility in another country, please visit the following site: https://www.sony-asia.com/section/contactus

  If my post answered your question, please mark it as an "accepted Solution".

• ATI catalyst control center update for hd 7670 (mobility)

  Hello people I recently bought a HP Ppavilion g6 x 2014 book with and graphics card Radeon hd 7670 m now I want to update its drivers to the Catalyst Control Center latest! How to do this and is it drivers of mobility may be able to get the update? Please help me! and if not why isn't HP releasing new updates for these ati cards

  I understand that you want to update your AMD drivers.

  It seems that the t can be absent from g6-2014tx.  What is your laptop?  In General, the AMD driver can be placed on the provided HP driver.  It should work with switchable graphics systems and for systems that have no switchable graphics.

  An important note about updating the driver and graphic systems switchable.  If your laptop comes with switchable graphics, do NOT uninstall any HP video card driver.  This could lead to the switchable graphics system become corrupted, requiring a full recovery to solve the problem.  Drivers can be installed the driver from HP.

  A second note is to make sure that .NET Framework 4.0 is installed.  This can be checked in programs and features, or by installing it manually to be sure, it is installed.  If you need this, it can be found here.

  Instead of download the portable version of the driver, don't forget to download the desktop version of the driver.  The pilot will include desktop and mobile versions in a single package.  The latest version as of today can be found here.

  During the installation of the driver, be sure to choose custom install instead of car or express.  If you choose custom, you will be able to see a list of all the drivers and software that will be installed.  If display driver and Catalyst Control Center is listed, then you should be good to proceed with the installation.

  Let me know if that answers your question.

• ATI Catalyst Control Center popping up a warning

  Problem with the ATI Catalyst Control Center popping up a warning whenever I connect

  Whenever I login I get a pop up with this message: ATI Warning: The Catalyst Control Center is not supported by the 28octobre your compatible graphics driver. Please update your ATI graphics driver or card from ATI enableyour using the display manager. I went to the display manager but could not know where or how to turn the ATI card. This message has just started to appear about two months after I downloaded some windows updates ago and signed on. I am running Windows Vista Raedon HD 2400 PRO.

  Hi waters choppy.

  See the link below for a thread on the forums of AMD with a similar question, try steps mentioned them.

  http://forums.AMD.com/game/messageview.cfm?CATID=260&ThreadId=105228

  If the previous step fails then uninstall all the drivers of graphics card and software the computer later download the updated driver for the site Web of AMD and check.
  http://www.AMD.com/us/products/desktop/graphics/ATI-Radeon-HD-2000/HD-2400-Pro/pages/ATI-Radeon-HD-2400-Pro-series.aspx

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Catalyst Control Center

  I kept getting a message that wasn't the catalyst controller. UNON several suggestions I deleted the program, if it is bad to my computer.

  Hello

  The Catalyst Control Center allows you to control various aspects of your AMD graphics chip, but unless you particularly need access to these, then he certainly will not damage your laptop if you have uninstalled it.

  If you do not install this in the future, you can use Recovery Manager to reinstall your driver of graphics AMD which will reinstall also the CCC - the procedure to use to reinstall Recovery Manager the drivers and the software is detailed in the document in question on the link below.

  Recovery Manager - Windows 7

  Recovery Manager - Windows Vista

  Once the relocation complete, restart the laptop.

  Kind regards

  DP - K

• Catalyst Control Center won't open, please help

  Hello everyone I have a laptop HP DV7 - 6 c 00 with a card ATI Radeon HD 7470 M running on 64-bit Windows 7 SP1.

  Now a few days ago, I could open Catalyst Control Center (CCC) or "configure switchable graphics" but now, for some reason that I'm not able to open what makes me really upset because I've had nothing but bad luck with this laptop.

  When I was able to open CCC when I tried to configure switchable graphics, it only helped me select programs to use with switchable graphics, this is not what I wanted.

  I wanted to like my other HP laptop where if I plug my charger it asks me to change graphics card and if I unplug it, same thing.

  I could get my other laptop works correctly with the switchable graphics option in getting the last graphic card ATI radeon for this laptop, but for some reason that I can't do with this laptop. It seems that the pilot of 7470 m radeon hd can only come from HP.

  Even when I downloaded the correct driver or automatic detection utlity Radeon site, it gives me an error of incompatible hardware, and the installation is aborted.

  So very well since I wanted to correct my switchable grahics problem where it is more general (not ask me to change when I plug / unplug the charger) told me that I had to update my bios. Then I updated my bios from HP website. Here is the link I used

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5214391&...

  Okay, so after I updated my bios I've gone into bios and entered the 'switchable graphics option' and changed momentum for "fixed".

  After the reboot, I can not open the CCC (I could not open it before that the bios update or the other, I was hoping that the bios update would fix it)

  Then I tried to go to the "HP Recovery Manager" and reinstall the AMD graphics card driver, which didn't work.

  I tried to go to 'Add Remove Programs' and I tried the 'fix' of 'Catalyst Install Manager' option and it does not work...

  As I said... I am very satisfied with this laptop, it seems that it is almost a daily chore to keep this laptop work properly. Every day, it seems that I'm fixing something...

  Personally, I don't know if switchable graphics has been a great idea/option, I mean, he seems to have the best intentions in the world, but all google searches I've done, it seems hardly all work correctly.

  Now, I am a dedicated HP customer, I bought 10 + laptops and desktops Desktop 5 + years, but I am very disappointed with this laptop... or maybe I'm just upset =)

  Is someone can please tell me what I should do to get CCC works so I can set up my advanced graphics card and fix my switchable graphics.

  Now, none of the drivers were working from the AMD website, but I could try to download their Catalyst Control Center app, do you think it would work?

  I really need some advice on this one there...

  Thank you all for your time and help

  OK well first off I want to thank everyone for all their support and answers! Hahah =-)

  Well, since I've had these great suggestions, it was extremely simple to fix this problem...

  Okay well I was able to find a solution to this problem on mine and here is how I did incase anyone runs into this problem and is in need of a solution as well...

  As I said above "switchable graphics" has never worked on my HP Pavilion DV7 laptop since the first day. So in order to get switchable graphics work where he asked me "can I watch change graphics card" anytime I plug or unplug my charger for my laptop, I had to update the bios.

  After I updated the bios and rebooted the computer I had to go into the bios settings and change switchable graphics of 'dynamic'-> 'fixed '. This would allow graphics cards to move whenever the charger is plugged or unplugged, only graphic rather than spend proccessors on some applications (which is a nightmare!)

  Good then after that I updated the bios I tried to open it "catalyst control center" which does not open. After trying to reinstall the graphics driver to "hp Recovery Center" CCC would not always open.

  So here's what I did...

  First of all, I went 'Add Remove Programs' and remove the Cataylist Installation Manager

  Then, I ran CCleaner and did an analyization of my registry and delete everything that relates to the ATI graphics card, which had lots of locations in the registry.

  Then I went to the official driver from HP site for my laptop computer and downloaded the driver for my graphics driver for Radeon HD 7470 M.

  After installing the driver and restarting my computer, I could finally open Catalyst Control Center and switchable graphics finally working the way I wanted it!

  Well now, this problem is resolved...

  Right, now I always have problems with BSOD (blue screen of death) which I think that I have under control, but now I'm having a problem with my laptop which no matter when he goes into "sleep mode" and I try to take over the laptop, just of freezes and stays on the black screen, even with the light on the button (f10) wifi on and the light button mouse on...

  When it goes into sleep mode, I can't get the laptop to resume, I have to turn off it and then restart it back...

  I swear that this HP Pavilion DV7 was nothing else than to the problems of... but me, I learned a lot by setting all his questions and I hope to have this resolved as well...

  Well I hope that my experience with Catalyst Control Center and switchable graphics will help someone else's problem, and thank you all who participate on this forum (but not on my thread!)  =)

  Well, I just want to say one thing... HP makes great computer/laptop and I love them. All computers will have problems, it's just normal. I know that my next HP computer will not switchable graphics!

  gh0st-HP

• VAIO Control Center and VAIO Care

  I have a SVS1512DCXB Sony Vaio model.  I need to reinstall all including SONY Vaio, VAIO Control Center, and VAIO Care software.  It doesn't seem to be a full installation package on page 10 to 64-bit Windows.  All I see are updated and they do not install the full suite.  Where can I find a complete installation package.

  Hi Pmayerowitz,

  Welcome to the community of Sony!

  How you installed 10 Windows on your machine? Did you upgrade or clean install the operating system? Yes, you try to install the on-board version originally from the Software of VAIO Care. If you encounter a problem, you can update this thread.

  Best regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• Laptop HP pavilion 2002tx g4: lost catalyst control center and grphics switchable

  
  

  Hello

  @shenlon

  I do not understand everything that you need or what you've done. Can you give a more detailed explanation?

  Did move you from an earlier Windows 7 operating system?

  What discrete graphics (NVIDIA or AMD) card is installed in your laptop?

  What is the installed processor?

  You will need to install only the system of operatng any graphical drive AMD high definition (HD) to return the Catalyst Control Center that allows the switchable graphics. Run the installer twice. The first time you run it delete everything when asked and second time install everything when asked.

  The required drivers for Windows 7, 8 and 8.1 are found in the following web support document. What one do need it?

  Click on edit and then click Update to change the version of Windows drivers that appear.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G4-notebook-PC-series/5226238/model/5264284#Z7_3054ICK0KGTE30AQO5O3KA30R1

  Answer my questions in a new post instead of constantly changing the original to avoid confusion. I really can't help you if you don't answer my questions.

• Cannot configure graphics switchable + Catalyst Control Center has stopped working

  I have a hp pavilion 15 core i5 3230 M @ 2.60 GHz CPU processor running windows genuine 8.1 64 bit (version 6.2.9200).

  At first, I couldn't choose my Radeon HD M 8670 graphics adapter in the settings for my games and more recently, it has become worse now in the sense that I now get the following message appears when I try to configure graphics switcheble. "catalyst control center cannot be started. Currently, there are no settings that can be configured.

  Please I just bought this laptop for one purpose: Gaming. And his frustration that I cannot see the intel HD Graphics 4000, which is not enough to run my Microsoft Flight Simulator X. Please I need your help. I am average in computer science so please help me with the terminologies that are not too geek. Thank you and God bless.

  Emmanuel.

  Hello Cfm56pilot,

  Thanks for posting on the HP Forums!

  I understand that your CCC does not, preventing you to set your graphics card. I'll do what I can to help you with this problem!

  Normally, uninstall CCC, then your graphics driver is how to begin troubleshooting. Once they are gone, reinstall the graphics driver, then the CCC. I have seen this to solve this question several times. You can use HP Recovery Manager to reinstall the CCC and the appropriate driver. I'll give you a document containing the steps on how to do: use the Recovery Manager to restore the software and drivers

  I think the problem will be solved for these measures. Whatever it is, please provide your results. Thanks again for the display on the HP Forums. Have a great day!

  Mario

• ATI Catalyst Control Center 8 problem Windows

  Hello, I upgraded my ph Pavilion g series at windows 8. But now when I start it, I get the error message that ATI Catalyst Control center needs to be reinstalled. I tried a bunch of times but he returns (reinstalled, tried updates of the ATI site, nothing helps, he said: my driver is correct)

  And second, when I start it just sometimes gives a gray screen (and then I press the power button for 5 seconds to close). I think it might be related to my problem of graphics card. I'm a patient person, but I'm a little scared because I have a feeling I won't take long for my laptop to fi serious accident I have to keep doing this.

  Someone at - there of collaborative for these 2 problems I have?

  Thank you!

  Delabarre

  Hello

  Welcome to the Microsoft forums.

  You have installed the latest driver after uninstalling the driver?

  I suggest also refer to the suggestion from me from following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/Catalyst-Control-Center-failure/de8882d9-c5f7-4916-A94F-7e52582f351b

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• Restore "Intel Control Center.

  Hello everyone, I received my new T520 yesterday and have been exploring it and acclimatize myself to Windows 7 Pro x 64. I may have a few comments/questions as soon as I get the update system / setup and yet verified. I did take the initiative online yet. For now, I could use some advice WRT correctly my first Oops. Double click inadvertently led to uninstall "Intel Control Center". I don't know exactly what it is, but I'd feel better if I could reinstall it. Everyone here is familiar with it and become familiar with the way by which I can get on my system? Thanks in advance

  Thanks for the reply and information.

  I threw the dice and reran c:\swtools\drivers\amt\me_sw\setup.exe, select the option to also install the Intel Control Center (ICC) Rerunning the non optional steps of the installation process seems no problem (fingers crossed) and I reinstalled CCI.  Indeed, all the ICC did on my system is to provide links button to launch Intel HD graphics and Intel Management and Security Status.  Both are easy to launch without ICC.  Interestingly, the list of applications ICC does not have Intel PROset/Wireless Tools, but it's too easy to launch his own.  So now that I've seen ICC, I can quickly uninstall again .

  Aveo... amacus

• Catalyst Control Center won't save my switchable graphics settings

  I recently got a HP dv6 and I really like it. It comes with a dedicated graphics of Radeon 6490 Mr. I had no problem with using it until I upgraded my Catalyst 11.1 Control Center, I think. I've since had questions apply settings that I put for switchable graphics. I can open and only display the CCC and switchable graphics, no problem:

  

  As you can see in the photo above, it seems to work and detect applications. Here is an example of one of the settings I wanted:

  

  But, when I want to record the settings changed in switchable graphics and press on apply, the settings back to the way they have been, and will not, save like nothing happened. Is not only between saving energy and High Performance card settings, she also won't let me not affect more requests. I can clearly remember as I could when I got this computer. I'm not sure but I think it was version 10 or something. I am able to just switch to a graphics special in fixed Mode very well, but I want to use switchable graphics and save energy on my laptop. This version of the CCC I have now when I go to preferences--> on the Catalyst Control Center. I think that it is 11.12.

  

  I'm pretty sure I have all the drivers for the card update, but AMD doesn't let me use downloads of their cause of site I should use the manufacturer programs I think. I have automatic updates turned on, including HP Support Assistant. I tried to look online for a solution, and the closest thing I've found is this site: http://forums.whirlpool.net.au/archive/1819873 which is a blog with someone who has almost the same problem as me, but without solution. I could perhaps try to downgrade, but I can't find a way to do this or a download link.

  I really need help with that. Please and thank you

  Hello. I don't know if you have already solved your problem, but his should help other people as well in any case. I managed to solve this problem today on my laptop. What I've done, it's the Division of hp drivers, I downloaded catalyst (catalyst in the ati site gave me this problem). the driver that ships with this catalyst did not work, so I used windows update to get a working driver. so, in theory, what you have to do is download from the hp Web site catalyst, and during installation you select custom and click Next until what he gives you a list of the programs you want to install. You should uncheck everything except catalyst. (do NOT install the driver gpu, catalyst ONLY)
  I'll post a link for the driver for my laptop model, but since you will only need a catalyst, it shouldn't be a problem.
  for windows 32 bit-> http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100313-1&cc=us&dlc=en&lc=en&os=4062&product=5118769&sw_lang=
  for windows 64-bit-> http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100313-1&cc=us&dlc=en&lc=en&os=4063&product=5118769&sw_lang=
  You can also search for your model, but I recommend not to install the driver anyway. just get it from windows update, I have assumed that you already have the driver anyway. Good luck.

• How to identify the vaio control center in the windows operating system 8

  friends,

  "give me the path to identify' vaio control center" in the windows8 operating system

  You can search the start screen VAIO control center.

  If my post answered your question, please mark it as "accept as a Solution.

• 11R2 how to change IP in OWB_REPOSITORY_LOCATION and the default control center

  We are changing the IP address of the Server repository database OWB. Review of the locations tab, I found the default control center and OWB_REPOSITORY_LOCATION are configured with IP addresses, so I need to change the IP addresses in hostname in both entities. I think that I can not use the OWB_HOME/rtp/sql/UpdateLocation.sql script, so, how do?
  I would be grateful if someone points to the other questions I should check OWB point of view.
  
  Thanks in advance
  Carmen

  Carmen,
  Just change the address of WB_RT_SERVICE_NODES control centre.
  Don't take any attention to the value of hostname DEFAULT_CONTROL_CENTER in Design Center because this value is taken from the connection details in the window of loging (for display in the Design Center) (if you type in the address IP of Loging window you'll see IP address in the settings of DEFAULT_CONTROL_CENTER without taking into account the actual address stored in the repository OWB).

  Kind regards
  Oleg