Question of culture and guide for multiple images.

Similar Questions

• Is there a way to pay for multiple images to in the same transaction rather than one by one?

  Is there a way to pay for multiple images to in the same transaction rather than one by one?

  Right now only at a time is supported.

• Cannot specify a different location for multiple-image backups.

  I want to record several image files on an external drive (which can contain a large amount of data)... It was suggested to specify a different location for the second image... but when I run the process of backup image... first a screen shows my external drive where the image will be stored... but then the screens seem to just continue to do a backup. I don't see any place where I can change the location of the image... It keeps on the re-write on the last saved... image I think that maybe you can change the location of the regular backups... but not for the image file... its on another screen or buried somewhere... the help screen with "attention, images can be replaced" is meaningless for me... I thought he said that it would only replace old images if there is not enuf room on the disc.

  thanx

  Steve

  Hello bichon,

  Thanks for posting on the Microsoft answers Forum.

  Look at the post below which asked questions on images and backup locations.
  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/338e311d-c0fc-4c56-a4c2-b25a7028188b
  With this option, below is where you can make changes.
  Select the drive to destination or optical disk or network location to store backup files. (this is where I want to change the destination directory name).

  If please reply back and let us know if this helps answer your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Harvest, you can use for multiple images?

  If you do copy work, is there a way to save a crop, and use it on multiple images that you could drag a layer adjusment to other images? Thank you.

  Difficult to know, from your description, what you really want. As mentioned Action is a very good option.

  There is also the "Front Image" option. You can designate any image opened (with the good harvest and the resolution), as your image before. Then with the crop tool is active, you can put these attributes directly in the options of the crop for any other image tool. This can be a quick way to unify a series of images in the same dimensions.

• XML and film of multiple images

  A Flash AS3 question:

  If you import an XML file into frame 1 of a multiple image film. Is the accessible XML in other than farmed frames 1 (say 20 frame)?

  Thank you

  It is accessible from anywhere (using the correct path) anytime AFTER loading is complete.

• You can use a single hard drive to store an image disk backup and restore for multiple computers?

  I have a couple of computers that I recently installed Win7 on. As soon as I do an install I always do a backup image is preparing for the worst. Do I need a separate hard drive for each computer that I do a backup or image can I put all my images on a hard drive backup? I already have two separate a HDs different images, but would like to have them all in one place. I already tried a straight copy of an image to HAND HD I would use like, but without success. Is this possible or do I really a backup image HD?

  Depends on what you use for backup.  in General, you need not to have a picture in HD.

  Personally, I like acronis true image home 2012 (free trial) because it is flexible, easy to use and workjs each time.

• Question regarding setExtent and getPreferredWidth for the custom field

  I am trying to understand the difference between getPreferredWidth and setExtent, which relate to the width of a custom field.

  I create a field that may be greater than the width of the screen. The field is made up of cells (for example columns and lines or cells, such as a table). The cells contain text, shapes, lines, color, etc. When I display the field I only paint the visible columns on the screen and allow the user to use the trackball to accomplish the columns out of the screen.

  At present, getPreferredWidth returns the total width of the field without all the empty columns, is longer than the width of the screen. I use the same value in setExtent for width. GetPreferredWidth must return the size of the field that is painted on the screen - the total width less the width of the columns out of the screen? I have the same question about setExtent - width either in total, longer than the screen width or the width of the part of the field that is painted on the screen?

  If I use the width of what is painted on the screen or the other of these methods, then the width changes when the user scrolls through the field. As the user scrolls, I calculate the number of columns will agree to a width of the screen and paint these columns. Is it a problem to have the PreferredWidth and the setExtent change width? I read that setExtent is called only when the Manager sets this field, so that the changes will not be recognized.

  It seems to work in two ways in a few simple tests, but I was just curious as the value of width that is right.

  Thank you!

  Mark

  When a field has changed in a way that requires the update of the screen (for example, after scrolling offset changes), simply call invalidate() from this area. That will eventually lead to paint (Graphics) for the field. At this point, you return the update field. (If only part of a field - as a single cell - needs to be updated, there invalidate() versions that accept arguments where, for efficiency, you can limit the update for just this part.)

  If I understand your needs, you can achieve the effect desired in the paint method. You can use the current dimensions of the field, the cutting of the graphics area, and your internal roll compensates to decide what to paint and what to delete. Let your custom field leave white space where you decide of doesn't make is not part of a cell. There is no need to change the scope of the field.

  If you go about it by changing the dimensions of the field, and then you ask the system to play much more work he has to do. If the custom field is the only field on the screen, it won't make much difference in the behavior (although there may be performance). With more than one field, it can be weird effects. For example, suppose that your custom field is one of several fields in a HorizontalFieldManager and you change the field width. When the HorizontalFieldManager recalculates its own layout, it will change the horizontal position of the fields to the right. The effect on the user, I think, would be really confusing: as the custom field parade, parties to the right of the screen could bounce left and right as the changed width field. I can't imagine that's what you want.

  Here's another way to think about this: absent some bit of style, your custom field would prefer be exactly wide and high enough to show all without scrolling. So the width and height would be based on adding the appropriate cell widths and heights, regardless of what actually is on the display. (It's also a long time that you do not have something fanciful.) If the optimum height is a function of the width available - as with sheathed on the line of text - you would implement this logic in the layout method. You then have no use for autonomous preferred width and height).

• Questions of VLAN and configuration for Cisco AIR-CT2504-25-K9 Controller

  Hello

  It's my first time thanks to the Cisco wireless solutions, so I was hopping someone could help me with the following:

  We just bought the AIR-CT2504-25-K9 controller with some points of access for the AIR-CAP1702I-E-K9.

  The network is as follows:

  Peripheral layer 3 (managed by third parties): it's on the domain network. (VLAN by default, 1 - unidentified)

  ADSL router - it's the network without comment thread. (Default Vlan 4 - tagged).

  VOIP: VLAN 5.

  Both fittings go into a switch Cisco SG500 52 (Layer 2). There is a port to shared resources on the switch SG500 with VLAN 1 (Tagged) and VLAN 4 (with tag). The WLAN controller is plugged into this port trunking.

  The data and management network are in the same subnet and on the same VLAN (1).

  I used the wizard on the controller setup.

  There are three interfaces:

  management VLAN ID 1 IP 192.168.1.2 Port 1 (configured with a gateway domain network, DHCP, etc.).

  VLAN wireless identifier 4 IP 192.168.5.1 Port 1 comments (configured with modem router ADSL, DHCP, etc.).

  Virtual IP 192.0.2.1

  Proxy DHCP active overall.

  There are two wlan networks:

  (1) area - management Interface - SSID abc.

  (2) comments - comments Wireless Interface - SSID xyz (the wizard put to management, but I changed it to the wireless).

  Are the AP connected to another SG500 switch which is shared resources to the switch with the controller.

  Ports of the APs are connected to have only 1 VLAN unidentified. They don't have 4 VLAN Tag or not identified. However, everything seems to work as expected.

  When I join the guest network (SSID xyz), I get an IP address from the router ADSL and all Internet traffic goes through him. When I connect to the domain network (SSID abc), I get an IP address from the DHCP in Windows Server and all traffic goes through the device of layer 3 (I checked the public IP address in my browser). I can't ping anything from one network to the other.

  My questions are the following:

  (1) how the guest network traffic (VLAN 4) headed the APs controller when they are connected to the ports on VLAN1? Is it because the traffic is encapsulated?

  (2) is set up correctly? After you configure the controller, I saw a note in the forums, this State I can simply enter 0 for the management of VLANS to let it not identified. However, in my case, I kept it as 1, which is the same as the switches and then the tag VLAN on the switch. In addition, the set Wizard wlan of comments to use the management interface but I changed it to use the comments interface.

  (3) when I connect to the APs of the controller, I see several options that can be configured manually. Is it necessary for this? For example, there is an option of data encryption.

  Thank you

  A

  Hello

  (1) how the guest network traffic (VLAN 4) headed the APs controller when they are connected to the ports on VLAN1? Is it because the traffic is encapsulated?

  Yes, I'm with CAPWAP:

  More information: http://lets-start-to-learn.blogspot.de/2014/08/cisco-wireless-understand...

  (2) is set up correctly? After you configure the controller, I saw a note in the forums, this State I can simply enter 0 for the management of VLANS to let it not identified. However, in my case, I kept it as 1, which is the same as the switches and then the tag VLAN on the switch. In addition, the set Wizard wlan of comments to use the management interface but I changed it to use the comments interface.

  If you want that mgmt interface must be unmarked and then put 0 otherwise you can use vlan 1.

  I do not have what is configured under mgmt and comments interface, but according to the name I'll say yes, you must set the comments under comments wlan interface.

  (3) when I connect to the APs of the controller, I see several options that can be configured manually. Is it necessary for this? For example, there is an option of data encryption.

  Yes, there are many things that you can configure, but I'll leave most of the default of things unless you really need to change!

  The following best practices: http://www.borderlessccie.net/?p=270

  Concerning

  Remember messages useful rates

• Code unique appl and icon for multiple operating systems?

  All,

  I'm new to the BB appl development.  I was finding this forum very useful, although I have some fundamental questions for which I can't find existing threads...

  We need to create basically just a web app launcher (possibly with the overview icon) to get out by using BES.  We have a range of features and versions of OS (from 4.1) in support.  My questions have to do with how support these different devices and OS versions.  I hope I can have one application to get out for all devices instead of having separate applications to push to the respective devices based on the device or operating system.

  So my current thinking is to compile the application targeting the OS 4.1, so will it work on that and all the new versions of the OS.  As far as I can tell (not having completely tested) the same code (to launch the browser and the overview icon support) for OS 4.1 is compatible up to all new OS versions. This approach, compilation on OS 4.1 only, seems reasonable?

  My second concern relates to the icons that different devices prefer icons of different sizes.  What's usually managed?  Generally include you all files of icons of different sizes in the construction and through the code click on the appropriate icon based on detected device?  Or do you usually come out with a file of unique icon with dimensions that have air pretty much ok in all devices?  Some compromise between the two?

  Thank you.

  Code of Blackberry is compatible before not retro-compatible. So, if you are developing an application with older JDE it can run on the new OS, but not the reverse.

  Also see this article:

  What is - an appropriate version of the BlackBerry JDE
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800738/800901/What_Is...

  And on the icon I don't think that any device have a preference of dimension.

  You can use any reasonable size (ex: 50 * 50) for icon which will look almost the same in all devices.

  Concerning

  Bika

• Question of optimization: 1 handler for multiple events or 1 Manager by the event?

  Something I can't decide, simply because I'm not sure what would be most effective.

  Example: I have a few menus, each with a handful of icons click on (say a total of 10 objects that can be clicked on).

  Would it not be better to have 1 stage.addEventListener (MouseEvent.MOUSE_DOWN, clickHandler); with 10 if (e.target.name == "nameX") who is called on each click.

  Or would it be better to have 10 separate objectX.addEventListener (MouseEvent.MOUSE_DOWN, clickHandlerX); for each menu item that can be clicked?

  I suppose my confusion comes from not knowing what a listener does exactly, it uses all the resources I look for an event?

  (added)

  After typing all this, a good comparison would be closer to an event listener is nothing else than a way to call a function and is not otherwise using resources?

  My question is still, but I'm leaning towards several Auditors and managers.

  (add 2)

  Sorry my brain blurs, I'm not good at explaining things.  I think it's a little clearer.

  For 1 menu I 1 this.addEventListener, and in the Manager, he has several if (menu_itemX.name == "nameX").
  It is better to have 1 eventListener in this situation, or would it be better to have several menu_itemX.addEventListener and managers separated for each action?

  (follow-up question)

  I did addEventListener when the menu opens and removeEventListener when the menu closes.  If the event listeners do not use 'no' resources unless their event fires is a bad practice for simple click and mouseover events mouseout/mouseouthandler()?  Should I just leave the event listeners here all the time?

  (sample code)

  If this makes it more clear which of these would work better?

  Version 1:

  this.menu1.addEventListener(MouseEvent.MOUSE_DOWN, clickHandler1);
  this.menu2.addEventListener(MouseEvent.MOUSE_DOWN, clickHandler2);
  this.menu3.addEventListener(MouseEvent.MOUSE_DOWN, clickHandler3);
  this.menu4.addEventListener(MouseEvent.MOUSE_DOWN, clickHandler4);
  this.menu5.addEventListener(MouseEvent.MOUSE_DOWN, clickHandler5);
  
  function clickHandler1(e:Event):void{}
  function clickHandler2(e:Event):void{}
  function clickHandler3(e:Event):void{}
  function clickHandler4(e:Event):void{}
  function clickHandler5(e:Event):void{}
  

  version 2:

  this.addEventListener(MouseEvent.MOUSE_DOWN, clickHandler);
  
  function clickhandler(e:Event):void{
  if(e.target.name == "menu1"){}
  else if(e.target.name == "menu2"){}
  else if(e.target.name == "menu3"){}
  else if(e.target.name == "menu4"){}
  else if(e.target.name == "menu5"){}
  }
  
  

  the leave it alone as long as your menu works as expected while adding them.

  leaving the listener takes memory.  removing it frees this memory.

  but free up memory and adding memory uses system resources, especially when free memory flash gc.  It is unnecessary to repeatedly the gc objects that will be added to memory later.

• Set color of image for multiple images

  In my workflow, I place pictures (Adobe) RGB in InDesign. Export PDF takes care of the RGB to CMYK (convert to destination with numbers of preserve) conversion.

  However, this uses the default rendering for each conversion mode: relative Colorimetry.

  For images, I want to use perceptual.

  Is it possible to quickly select all the images and change the rendering intent?

  All images have the same style of the object. Unfortunately, I couldn't find a way to combine the rendering intent on the style of the object.

  You can do this via assign profiles...

  

  It can also be scripted, something like this AppleScript:

  Tell application "Adobe InDesign CS6"

  tell the active document

  Sun together at all the graphics

  Repeat with x 1 as IMGS

  If class point x of Sun's image then

  Try

  set the rendered image of the point x of Dim to perceptual

  try to end

  end if

  end repeat

  tell the end

  tell the end

• How to integrate my name in the EXIF data for multiple image at the time Bridge CS3

  I tried to figure out how to do it for a while and just can't figure out how to get my the first two images and JPEG to show my name in the EXIF of the right of author or author entry when you enter in the dialog box "File Info" box so that it displays high display EXIF data using EXIF Viewer or in Bridge CS3.

  Can I get help on this? Point me to a tutorial or something?

  I already read bridge help and it is written in such a way that is not very clear to me on how to do it.

  Thank you for your help on this.

  Don't know what you mean with the get info part, but you can make a model

  for metadata, you want to appear in all the files.

  In the metadata high Panel on the right is a small triangle that if you click on it

  Displays a context menu. Inherent choose Create a metadata template. Fill it out

  desired fields and save it as a proper name.

  The model now shows in the submenu even as above as a submenu with append

  or replace the metadata model.

  If you select al files and use the model metadata to add all the files

  you will get your author about this model. Beware that the addition of this model

  some info in other areas or keywords can disappear. Just do a

  test on some files that you already have a return to the top of.

  Using the Adobe Photodownloader within Bridge you have the option of

  Add this template in the files when you download them from the card reader,

  see Advanced options for this.

  show my name in the EXIF data of the right of author or author entry when you enter it in the

  'Get Info' dialog box

• Dynamic Charting question - maximum lines and beaches for the omiy label values

  Hello
  
  I was wondering if it was possible to define an application variable and then referenced in a series in the chart definition.
  I have frequenctly need to go and exapnd the maximum number of lines to my definitions of chart with a value series
  15 and if I have a chart with multiple series it seems to make sense that they all have the same value. This made me think
  try to use some kind of variable. I tried to use a hidden page element. However, Apex seems to want a static numeric value
  and if I were just hard code for now value. Anyone succeeded with something else?
  
  Another issue I have is with the display of the label. When conspiring time series that allows the user to define a date range its hard
  to know in advance how to set the Label interval omit. An ideal solution would be to define a number of desired points as the chart
  can manage and dynamically assign omit interval based on some kind of formula. Again, the assignment of the static value is logical for some
  the entries date and not so much for others.
  
  Thanks for your suggestions!

  You will find the structure of the XML here: http://3.anychart.com/products/docs/anychart/index.htm

  Dimitri

• Question about XP and drivers for Satellite A210 - 11 p

  Just bought this laptop and I am very happy with it except one thing, yes the dreaded word of Vista again.
  I was wondering if Toshiba offers all the required XP drivers and if someone has installed XP on this laptop and not had any problems.
  Thanks in advance for any help or suggestion.

  Hello

  To my knowledge, the Satellite A210 - 11 p belongs to the PSAEL series.
  I found only some common XP drivers on the Europe of Toshiba page.
  For example Wireless Lan driver, display or Bluetooth Stack driver.
  Other drivers are not available and it seems it won't be freed in the future

  But I discovered that some devices are the same that on the A200 PSAEL try the drivers in this series and maybe they will work, but this is only a suggestion and I have really not 100% sure the drivers are compatible.
  Just try everything

• BlackBerry Smartphones Forget the question of password and security for Blackberry Id

  I try to use my Blackberry Id and I realize that I forgot my password question and security.

  I can't find a solution, I have to do?

  Read this to get instructions to reset your password BlackBerryID:

  KB26361 How to reset a BlackBerry ID password

  *****
  It must be remembered the BlackBerryID password or secret answer to the question. Without either, you're stuck.
  Your choice is:
  -Use a different e-mail account to create a new BlackBerryID (with which you will lose access to all apps purchased using the 'forgotten' first BlackBerryID, or)
  -Find the initial email you have been sent to confirm the initial BlackBerryID and there are a link to click to cancel and delete the account. Click on this, delete the account and then you can use that same e-mail to create a new account.
  Good luck.