Question of export - Youtube 4 k or maximum render quality

Similar Questions

• Export with maximum Render quality

  I'm about to release in 4K, a master project file final for a short film which was mainly shot in 4K, but has also a few clips in 1920 by 1080 and same 1280 by 720.

  I am not concerned about how long takes of the export.  There is no disadvantage (or advantage) to enable ' maximum make quality "?  What "go to maximum depth.  24-bit or 48-bit?

  I think for a master file, you would max on all this, right?

  Thank you for all the input.  I will use the master file to generate Vimeo, Apple TV, dubs etc.

  Use the maximum Render quality: Mainly affects the upscaling of the content. If you do not upscailing, you will not notice much difference. Looks like you might be content to 4 k upscaling, so I would say Yes for this light.

  Go to maximum depth: What is the depth of your source content? You have any content of your sequence that would benefit from the higher bit depth?

  If you really don't like how much time it takes to export, you might as well turn on these. The drawback is more encode time.

• I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) bu

  I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) but not tif files? Very frustrating. Tried to install the new updates but my creative cloud is just a blank page?

  Hello

  I think you are referring to the white empty window of CC desktop application.

  Please refer to the threads below where this issue has been addressed:

  Creative cloud is empty window why?

  Cloud Desktop App is empty?

  New application Cloud Creative unusable: it is empty!

  Re: Empty opening creative cloud app

  Kind regards

  Sheena

• When I export a video edited, the maximum dimensions are reduced. :(

  Hi, I am new to using Adobe first Pro CC. His version is 7.2.2. I use it on my Mac. I'm free range.

  I imported a video with domentsions of 2560 x 1600. Then, I edited this video. When I tried to export the edited video, the maximum dimentisons of video is 2048 x 1280.

  I want to export my video edited on dimensions of 2560 x 1600. How can I get this done?

  Thank you.

  Wei

  In your in the video settings of your export settings scroll down a bit you get to these settings.

  Then twirl them down.

• New to LabVIEW, just a few questions with export.

  Hello people, I am new to labVIEW program, we have access to the school but we got few learn it on our time, but we had a few questions before you start a project with her.

  We can use it to export a message text and voice on a phone? There are we using or developing another application? (like, IE. Whats App? or "textME")
  Can we integrate code c ++ with the script of labVIEW? (I have not yet read the help section yet and I currently do not have access to my computer at school to play with him)
  Any useful tools for the processing of the signal? I know that biomedical exist, but we were told that because of the changes around my program ciricling its an after the fact at the moment. Apparently, we have the software but not the equipment. (If necessary?)

  Also useful tutorials? I was check on youtube and stuff but still a little fuzzy on some things

  Thank you!

  Wow a lot of questions.  To get started with a free training.

  Training center of NOR

  NEITHER start-up

  -Hardware Basics

  -LabVEW databases

  -DAQ Application tutorials

  Introduction to LabVIEW for 3 hours

  Introduction to LabVIEW for 6 hours
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki

  Do not forget that many people make a career of LabVIEW Development.  They spend 8 hours a day, 5 days a week, for 20 years to develop, and they still don't know everything.  But don't get too discouraged because developers not great like these lair on these forums and are happy to help you.

  LabVIEW is a complete, true programming language.  Read and write text files are easy enough to do.  The range of the file IO has a reading and writing spreadsheet file works in many simple cases.  LabVIEW comes with numerous examples, launch it by clicking Help > example Finder.  You want to use a tool third 3rd for send SMS and voice mails.  An easier method to send SMS messages is to send an email to the carrier.  LabVIEW has a few examples on the email and there are a few on the search for a few forums.  LabVIEW can call several other languages, and built DLL easily, here again there are examples in this topic, or search the Web.

• Question on export in 4K vs 1080 p

  Hello. First timer here!

  I use Final Cut Pro X to make films composed mainly of still images (as a slideshow with Ken Burn effects)

  Photos come from Canon 5 d III via Lightroom. (Very Hi ground)

  My Question: Why the files coming out of the compressor is exactly the same size (500 MB for example) that I've specified 1080 p or 4 k?

  I mean, I don't understand why a 15-minute video in 1080 p is the same size and the same movies exported in 4K resolution. ?

  Thanks for the help

  First of all, what version of FCP X do you use?

  Second, what are your project settings for your slideshow (Cmd - J will report to the Inspector)?

  Thirdly, how you bring your video of the compressor and which settings to apply to your video are you using?

  Thank you.

  Russ

• Question about exporting data from Virtualbench.

  Hello

  I am new to the forums and VirtualBench and hoped that someone might be able to help.

  When I export data from the VirtualBench, I get 4 columns of data for the 2 channels. They are "1 Min", "1Max", "2 Min", "2Max.

  Example:

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Timestamps (ns)	1 min	1 Max	2 min	Max 2
  -3000600000	-0.205761317	0.12345679	-0.013168724	-0.001646091
  -2990598000	-0.205761317	0.12345679	-0.013168724	-0.003292181
  -2980596000	-0.205761317	0.12345679	-0.013168724	-0.003292181
  -2970594000	-0.205761317	0.12345679	-0.013168724	-0.001646091

  I don't understand what means min/max. I have not any spread. VirtualBench takes in fact several samples at each point?

  Thank you.

  In some places, VirtualBench application will automatically the peak of detection equipment.

  Peak - detect mode, over-samples scope and returns the minutes and the maximum voltage in each period the sample.

  You can manually control the sample mode by going to the settings of acquisition:

  

• Question of export OBIEE

  Hello everyone,

  I have a question about the export of obiee analysis. I have a dashboard page and a column analysis data format is 'DELETE '. However, users want to see repeated for these cells when they export excellent file. Is there a way to do this? While he is seen deleted on dashboard, it will be exported repeated format in excel.

  Kind regards

  Dilek

  Hi Dilek,

  We were faced with the same problem and could solve it with the following steps (change your insatnceconfig):

  • "second line should look similar to the following: http://www.w3.org/2001/XMLSchema-instance ' xmlns="oracle.bi.presentation.services/config/v1.1 ">
  • Add at the end (before the closing of ServerInstance tag) following:
    • 
      
      true
      
      

  When you have completed these steps, restart your PS (EM or with opmnctl) and check if it works.

  Best regards

  Pie

• Question to export PDF from Indesign book Blurb - color change

  Hello

  This is my first post on the Adobe forum.

  I have a problem when you export a PDF file that is intended to be printed for a book Blurb. The Preview on the site blurb is very different from my PDF in terms of colors.

  This is my workflow:

  -All my photos are converted to CMYK blurb (via photoshop) color profile and saved as TIFF.

  -J' I put all my pictures on my layout in Indesign CS6 (which also has the color of the text of presentation profile)

  - Then I set the PDF export preset that Blurb has provided (the profile description [based on 'Blurb PDF X - 3 Export Preset'] [based on ' [PDF / X-3: 2002]'] use these parameters to create Adobe PDF documents that should be verified or must conform to PDF / X-3: 2002, an ISO standard for graphic content exchange.)  For more information on the creation of PDF/X-3 compliant PDF documents, please visit the Acrobat User Guide.  Created PDF documents can be opened with Acrobat and Adobe Reader 4.0 and later.]

  -C' is where the problem begins: if I read the PDF with Adobe reader, it seems very well (i.e. I see on my screen of Indesign) SEE IMAGE 1. But if I look at the preview of the PDF on the Blurb Book Preview module it looks like really bad (see IMAGE 2).

  So my question is:

  What might explain my PDF looks so different from the preview Blurb and what step should I take to fix this problem?

  Blurb people have no idea so I hope that the Adobe community can help me!

  Thank you in advance!

  Vincent

  IMAGE 1: as seen on PDF when read with Adobe reader

  

  IMAGE 2: as seen on the text of presentation preview module.

  

  I recommend that place your images in InDesign as sRGB (you need to go back to the original images, not those who are already converted to CMYK). When you have finalized your document InDesign export presets PDF Acrobat, by selecting the text of presentation PDF presets (that you have installed). You can view the PDF result using Acrobat on your own (probably calibrated monitor).

• 2 questions: when exporting black and highlighted menu items

  Newbie here, I'm going with some basic knowledge of learning.

  Mac OS x 5.8

  InD CS 4

  Well, you have two questions.  My books are not their answer, my live-help person is busy (professional InD)... I come here to help.

  1 seems as tho when I draw a line of 10pt black, after the export to PDF, it is planned.  I have changed no settings and if something has changed... I am naïve.  No slides, an opacity of 100%, 100% black. If I print directly from .indd, black.  Certainly screened during the printing of the PDF, and my printing company is the only one who noticed.

  2. while I was messing around not try to understand the black line, all of a sudden, a lot of my drop-down menus becomes marked.  Again, I am naïve.

  Thanks a lot to put up with a novice.

  job1970

  With the visible preview window, move it from the road, then click inside the main window of PDF and move the mouse over a black area. Read probably less than 100% along the edge, it should say 100% that you get in the center of the area.

• question about exporting

  Hello
  It would be better if I start with what I did and then I'll say what I want. I use v 11.1.1.1.1
  
  Develpoment approx.
  
  1A a creator/dimension application named DevUserEditor.
  2. He has created a DevAppapplication.
  3. has taken his backup dump.
  4A the backup of all users/groups/roles using importexport utility that created export.xml.
  5A all reports or financial reporting backup using LCM utility.
  
  Production env.
  
  6 created a user ProdUser , who is creator/dimension application Editor.
  7. He created an empty application ProdApp. (Here I use another application named)
  8 has taken the SID USER_ID = 50001.
  9A dropped the schema and recreated, and exported the dump file.
  10 replace the SID for USER_ID = 50001.
  11 made a change to the export.xml file. I found it was Application Name = DevApp. I replaced it with ProdApp.
  12. all the users/groups/roles importexportutility has exported.
  
  After that, I was able to open the application. But some other users other than the ProdUser received some * 'Sync with Provisioning... '. "* error message. It was rectified as soon as I ran Updateusers.cmd.
  
  Now my question is - is it good to create a new application in prod? I used another named application. And it is appropriate to change the export.xml file?
  
  And what I do with the backup of the financial reports? I tried to import the files using LCM, but I was not finished. I guess these LCM xml/csv files have the name of the DevAppapplication. I'm confused where do I replace the name of the application with the new name of the application is ProdApp?
  
  Any help?
  
  Thank you.

  Hello

  If this is the same app on dev and prod so it is advisable to use the same name, it makes the migration of a much simpler set. In theory, you should should not call an app dev when turned on dev because everyone knows they are logging in the dev environment, even for production. My advice would be to stick to the same name for an application, then you will not have to change as well.

  If you are creating applications to planning with the default admin account that is created in shared services then you will also have a much easier time, it's because the SID does not change between environments.

  It is perfectly acceptable to edit xml files if you need to change to say an application name, it becomes more difficult with financial reports that there is some files associated with an export of lcm, once more, if the name of the application is preserved even it will be much easier.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Question-> DBMS_DATAPUMP - EXPORT, TRANSPORTABLE

  Hi all
  
  OS: BSG 64
  Database: 10.2.0.4
  
  For two days, I fight with my problem.
  The problem is that I tried to export trasportable using DBMS_DATAPUMP.
  
  When I use DBMS_DATAPUMP in my journal, I see
  #################################################
  Start "DBA_GRP". "" EXP_JOB11 ":
  Processing object type TRANSPORTABLE_EXPORT/POST_INSTANCE/PLUGTS_BLK
  Table main "DBA_GRP." "' EXP_JOB11 ' properly load/unloaded
  #############################################
  
  When I use
  expdp DIRECTORY of DUMPFILE = tablespacename200812_alex.dmp dba_grp/pasw_grp@TST = trans_dir TRANSPORT_TABLESPACES = tablespacename200812
  I see in the log file
  #########################################################
  Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
  Object type TRANSPORTABLE_EXPORT/treatment TABLE
  Processing object type TRANSPORTABLE_EXPORT/POST_INSTANCE/PLUGTS_BLK
  ######################################################
  
  Because lack of DBMS_DATAPUMP
  Object type TRANSPORTABLE_EXPORT/PLUGTS_BLK of treatment and
  Object type TRANSPORTABLE_EXPORT/treatment TABLE
  I'm not able to import the tablespace transportabe back to the database.
  
  I googled to ask tom, oracle and many other web sites, forum, but could not solve my problem.
  Could you please have a look at my code?
  I think the question is in steps: STEP 4 or STEP 4-1, but I'm not sure. Can I missing another setting or more.
  
  Thank you very much for your help in advance!
  
  
  BEGIN
  v_dp_num: = DBMS_DATAPUMP. OPEN ("EXPORT", "PORTABLE", NULL, 'EXP_JOB11');
  Dbms_output.put_line (' STEP 1: handful of employment is ' | v_dp_num);
  DBMS_DATAPUMP.add_file (manage = > v_dp_num,)
  filename = > rec.tablespace_name | ". metadata.log",
  DIRECTORY = > "TAB_PART_ARCH"
  filetype = > DBMS_DATAPUMP.ku$ _file_type_log_file
  );
  Dbms_output.put_line ('done STEP 2');
  DBMS_DATAPUMP.add_file (manage = > v_dp_num,)
  filename = > rec.tablespace_name | ". metadata.dmp",
  DIRECTORY = > "TAB_PART_ARCH"
  filetype = > DBMS_DATAPUMP.ku$ _file_type_dump_file
  );
  Dbms_output.put_line ('done STEP 3');
  DBMS_DATAPUMP.set_parameter (manage = > v_dp_num,)
  name = > 'TTS_FULL_CHECK ',.
  value = > 1
  );
  Dbms_output.put_line ('done STEP 4');
  DBMS_DATAPUMP.metadata_filter (manage = > v_dp_num,)
  Name = > 'TABLESPACE_EXPR ',.
  value = > ' IN ("% tablespacename200812 %'')).
  );
  Dbms_output.put_line ("' STEP 4-1 is completed");
  DBMS_DATAPUMP.metadata_filter (manage = > v_dp_num,)
  Name = > 'TABLESPACE_LIST ',.
  value = > "'tablespacename200812"'
  );
  Dbms_output.put_line ('STEP 5 does');
  DBMS_DATAPUMP. START_JOB (v_dp_num);
  EXCEPTION
  WHILE OTHERS
  THEN
  v_sqlerrm: = SQLERRM;
  
  sp_log ("METADATA FILE CREATION FAILURE for ' | ') Rec.tablespace_name | "Reason: ' | '. v_sqlerrm);
  
  DBMS_DATAPUMP.stop_job (v_dp_num);
  END;

  Hello

  This line

  Object type TRANSPORTABLE_EXPORT/treatment TABLE

  is absent when the datapump is not all tables in the specified tablespace. You can check it using this query:

  Select the table table_name from dba_tables where nom_tablespace in "YOUR_TABLESPACE_NAME";

  I'll guess that you get no back line.

  Here is a update .sql script that works very well. At the beginning, I let fall and then create a tablespace and table. If you have a table called this or a tablespace and you run this script, it will drop these 2 out of objects.

  -test_api.sql

  set echo on

  Drop tablespace including contents test;
  create tablespace datafile 'test.f' size 10 m test re-use;
  create table scott.test_table (a number) tablespace test;
  insert into scott.test_table values (1);
  commit;
  alter tablespace read-only test;

  declare

  number of v_dp_num;
  v_sqlerrm VARCHAR2 (4000);

  BEGIN
  v_dp_num: = DBMS_DATAPUMP. OPEN ("EXPORT", "PORTABLE", NULL, 'EXP_JOB25');
  DBMS_DATAPUMP.add_file (handle-online v_dp_num,
  name of file-online "metadata.log."
  DIRECTORY-ONLINE "DPUMP_DIR."
  type of file-online DBMS_DATAPUMP.ku$ _file_type_log_file
  );
  DBMS_DATAPUMP.add_file (handle-online v_dp_num,
  name of file-online "metadata.dmp."
  DIRECTORY-ONLINE "DPUMP_DIR."
  type of file-online DBMS_DATAPUMP.ku$ _file_type_dump_file
  );
  DBMS_DATAPUMP.set_parameter (handle-online v_dp_num,
  name-online "TTS_FULL_CHECK."
  value-online 1
  );
  DBMS_DATAPUMP.metadata_filter (handle-online v_dp_num,
  Name-online "TABLESPACE_EXPR."
  value-online 'IN ('TEST') '.
  );

  DBMS_DATAPUMP. START_JOB (v_dp_num);
  EXCEPTION
  WHILE OTHERS
  THEN
  v_sqlerrm: = SQLERRM;

  DBMS_DATAPUMP.stop_job (v_dp_num);
  END;
  /

  -output metadata.log

  Departure 'SYS '. "" EXP_JOB25 ":
  Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
  Object type TRANSPORTABLE_EXPORT/treatment TABLE
  Processing object type TRANSPORTABLE_EXPORT/POST_INSTANCE/PLUGTS_BLK
  Table main 'SYS '. "' EXP_JOB25 ' properly load/unloaded
  ******************************************************************************
  Empty the files together for SYS. EXP_JOB25 is:
  /ADE/dgagne_l6/Oracle/work/metadata.dmp
  ******************************************************************************
  Required for the TEST transportable tablespace data files:
  /ADE/dgagne_l6/Oracle/DBs/test.f
  Job 'SYS '. "" EXP_JOB25 "carried out at 16:35:10

  Please let me know if you managed to get your tables in the dumpfile.

  Object type TRANSPORTABLE_EXPORT/treatment TABLE

  Thank you

  Dean

• Strange question on export: time-lapse images fades after export

  I'm doing a video where I speed up a bunch of images 1000 to 2000%. When I play in the timeline, it seems normal. After that I exported it, however, it's blurred.

  In the export settings and clip, "Interpolation of time" has the value of aerial survey.

  The layer source footage is h.264 QT 29.97 FPS, export file is the same.

  Anyone know what is happening?

  You export the file as an interlaced (upper or lower field order)?

  If so, try to export the file in progressive format (order of progressive value fields).

  MtD

• Question to export Essbase

  I have the strangest error.
  
  I am trying to export level 0 and import in our new enviornement.
  
  Versions for target and source: 11.1.2.2
  
  My export method:*.
  
  Right-click [database name]-> export
  Export to file [name.txt]
  Export option: data Level0 blocks
  Export to the format column
  
  Expected results.
  Header: Begbalance, jan-> Dec, period
  
  This output
  Header: 'HSP_InputValue' 'HSP_InputCurrency' 'HSP_Rate_USD' 'HSP_Rate_RMB' 'HSP_Rate_CNY' 'HSP_Rate_PLN' 'HSP_Rate_EUR' 'HSP_Rate_GBP' 'HSP_Rate_MXP '.
  
  -------------------------------------------------------------------
  
  Now I have exported and imported with success the other applications and all include them the HSP_Rate dimension.
  
  other info if you need:
  These are applications of history 11.1.1.3 EPMA.
  I'm creating new BSO applications in our OOD 11.1.2.2 and data import (yes I'm not migrate the application planning itself, simply to migrate data to the bso)
  
  Please let me know what you think.
  I even tried the outline of the restructuring HSP being the first dimension, I don't know why it was the first. But anyway, I moved it in essbase. (did not in the planning because it has been deleted before long. Essbase app is left. )
  
  Published by: 997328 on June 7, 2013 14:05
  
  Published by: 997328 on June 7, 2013 14:24

  Words Glenn is correct, even if I'm still confused.... from your description, it seems like you're moving data from an OSB application on a single server to an application of OSI... on another server.

  My comment on there is not not a mistake was not being facetious. (Why would you need one) a column to the format export or b) a rule of load? There must be something more to what I don't get...

• ID to the question of export PDF...

  I'm trying to export a document to format 17-page letter formatted with facing pages for Acrobat to InDesign 5.5. When you export, the first page is fine. The rest of the pages, however, climb 2 per page.

  How to export this document in PDF format so that each page, the front and the back, print individually?

  I use Mac's ID, OS version 10.6.8 4 GB of RAM.

  Hah! Who did the trick!

  Thank you, Bob.