Question of GFX - card not supported. Workaround solution? Another question?

Similar Questions

• App says "SD Card not supported" and "SD card dead."

  When I try to access my 64 GB wireless connect drive, using the application, I get an error red at the top that says "SD Card not supported." It gives me the opportunity to reach a "refresh" - like icon. When I do, it says "SD card dead." It does not allow me to change the settings of the player, nor can I see the contents.

  If I try to connect the disk with my computer, the web browser simply says that it cannot connect to the page.

  When the player is connected to my computer, I can read and write files perfectly fine, it immediately mounts and storage information is displayed in the window management drives in Windows. It is just like normal, like a flash drive.

  The wireless network is displayed correctly, that my computer and the phone are able to connect to the wireless network. However, it is not able to read/write/access to the drive.

  The App also shows that the battery level. It won't show the phone storage space, or it will show the space remaining on the disk.

  Edit: It also just started something really weird. After being plugged into my computer for about 10 minutes, the light starts to Flash quickly and would act as if it was to be disconnect and reconnect the computer for about 15 seconds. And then he stopped. After 10 seconds, he started to do it again. 15 seconds later, it returned to normal and haven't done anything since.

  It had exactly the same problem happen to me and I was about to give up, but finally had a breakthrough, so I made an account just for this post.

  Format the Stick wireless by using the tool "HPUSBDisk":

  http://filehippo.com/download_hp_usb_disk_storage_format_tool/

  Just choose your player, select the "Fat32" filesystem type, uncheck the "quick format" box and click on 'start '.

  Allow the formatting process complete and you should be in business.

  I tried many other methods, including those proposed in the forums and SanDisk KB and it's the only thing that actually worked.

  It is worth noting that when this problem occurred in the first place for me, it's following a format of the WirelessStick (16 GB) on a Windows PC. Following this format, I got exactly the problem that the OP has been/is seen.

• NEF Raw D500 XQD card not supported

  Can someone help me with this problem? When I try to import Raw files from my Nikon D500 XQD card in Lightroom 5 or 6 (updated yesterday) I get the message "this file format is not supported by Lightroom. When I try to check the updates that Lightroom tells me that my computer is not connected to the Internet, which is bullshit. Does anyone else have problems with Lightroom and Raw of Nikon XQD files. Nikon have been absolutely no help whatsoever.

  Please confirm the exact version of Lightroom, you're running.

  The current version is 6.6.1.

  The D500 has been initially supported by Lightroom 6.5

  Devices supported by Camera Raw

• I have new Dell Inspiron 15 7000 2-in-1 graphics card = Intel HD Graphics 520 only see a blue screen in the develop module is the graphics card not supported?

  I just new Dell Inspiron 15 7000 for Lightroom on road.

  Graphics Intel HD Graphics 520 =

  Only get blue screen to develop the module

  This card is not supported?

  It works as Lightroom uses is no longer your GPU for rendering of image in the develop module.

  Please see the FAQ and the troubleshooting of Adobe Lightroom GPU

  ~ Assani

• BIOS error 104: network card not supported after the update of the bios, HP G60

  Recently, my hard drive has begun to fail. I bought a new drive, installed a Windows 7 ISO on a flash drive, installed etc. I have a HP G60-237NR. I have reinstall everything, and then I went to the page of the drivers for my laptop. I started to install stuff, at that time there I was bored so I'd sort of from the bottom to the top if this order of the questions, I can give more details on that if I need to. I downloaded the BIOS update, because I thought that "good, he he listed for my computer, I have no doubt it needs to be updated since my laptop like 6 years. Flashed the BIOS, my computer shut down and restart didn't like I thought he was supposed to. I turned on and well 'device 104 - unsupported of detected wireless network. System stopped. Remove device and restart. "I tried to find out what to do, which told me to remove the network adapter, the bios downgrade, plug it back and you're good. Well, I unplugged my network card and the snap-snap-in two sons who attaches and restarted, he did all the stuff. I got the same error. EDIT: I meant I plugged my network back in, but still got the error. Where I had the clichés about evil, I passed the clichés and double checked the connections maps, but still nothing. Everything I found said that should have worked, I'm on the same version of the BIOS, I started with that, but it does not recognize my network card. What am I doing here? Please help, thanks.

  Hello
  
  When you have the outside wireless card, you have the error?
  
  If this isn't the case, then you can get necessary to replace the wireless adapter. I would not be able to explain how, but something may have cause to fail.
  
  You can find maps of replacement of support on page 16 Chapter 4 of the Guide Service and Maintenance for your laptop.
  
  I hope this helps.

• Other video cards not supported will work with premiere pro?

  I have some older Dell Optiplex 755 and 760's, which have little space for graphics cards.  What I find that was or I can afford do not appear on the list of the first Pro of most system requirements supported cards.  Others will work?

  cc_merchant wrote:

  Yes, any card $30 video work. For effective material MPE you need a card at least 1 GB DDR5 VRAM nVidia.

  To be clear, Premiere Pro is not limited only to the NVIDIA GPU because we support also the acceleration GPU AMD and Intel, as well as our minimum system requirements

  System requirements | Adobe Premiere Pro

• NI-VISA 5.3 driver Wizard does not support USB 3.0 devices

  Hi all

  It seems that NI-VISA 5.3 does not support USB 3.0 devices. When I try to use the driver Wizard to create a driver for a USB 3.0 device, I get the error "ERROR-1073807178: device descriptor error - value not valid bMaxPacketSize0 (must be set to 8, 16, 32, or 64 bytes). I noticed that the unit has been giving wMaxPacketSize0 of 512 (2 ^ 9). But the driver Wizard treats the value 9. So I think that Assistant driver does not support USB 3.0 devices. If someone could confirm this?

  Thank you very much in advance!

  Jackie

  Hello Jackie,.

  Unfortunately, USB 3.0 is not officially supported in VISA 5.3 when you use VISA Driver Wizard.

  A non-official solution is to work around the "information in the descriptor' by selecting 'Other' in the list of devices. You will need to manually enter the 'USB manufacturer ID (vendor ID)' and 'type USB (Product ID) Code. You will then need to find your driver in Windows Device Manager, right click and select "update driver software". This, however, is not a workaround solution guaranteed as NI-VISA 5.3 is not officially compatible USB 3.0.

• 21 "screen does not support screen resolution by default/Vanilla in some games start

  It usually happens with games on the steam platform, I tried everything. Games work best at 1280 x 960, but when it is started at 1280 x<960 (by="" default,="" for="" some="" reason)="" no="" image="" registers="" and="" cannot="" be="" changed="" back="" to="" normal="" desktop="" resolution="" when="" i="" try="" to="" minimize="" it.="" is="" there="" a="" way="" to="" set="" the="" screen="" resolution="" of="" a="" full="" screen="" application="" before="" it="">

  Hi DikembeMutombo,

  As is the case with only the Steam platform, I suggest you to contact the manufacturer of the game. It could be the problem related to display card not supported by the resolution of the game.

  You can try to adjust the resolution of the game and the match with the resolution of the screen.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• videcard not supported

  video card not supported... had no problem before now... has received two replies... all two useful... Thank you

  one method is to see if a system restore can restore your system to a functional State before that problem.

  Another method is to check a second time Web site video cards for new updates or patches to download and install.   If nothing else, re - install everything the manufacturer has on its website.

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• Graphics card does not support the required version of DirectX 9.0

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  =========================================
  It may be interesting to try to go to support
  site Web of MFG. your video card and
  search for course Windows XP Compatible
  drivers.

  (FWIW... If your computer is a laptop... check
  the manufacturer of the comput4er one
  updated video driver)

  If you do not know the make and model of
  your video card... check documentation
  supplied with the computer.

  Also, you can try the following steps...
  Reach... Start / run... type...
  Msinfo32... Press on enter.

  On screen Information System... Choose...
  Components / display...

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. Also, you should find
  and follow the installation instructions on the
  support site. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Error trying to open .jpg from an SD card image using Windows Photo Gallery: this file format is not supported, or you do not have the latest updates of photo gallery

  Vista - Photo Gallery

  Tried to upload a .jpg from an SD card image (the image was scanned with a Pandigital Photo converter, slide, negative (model # 05 PANSCN).) This message appeared in the photo gallery, "Photo Gallery can't open this photo or video. This file format is not supported, or you do not have the latest updates to the photo gallery. "I inserted the SD card even in a HP Photosmart C6280 printer; the printer has recognized the file and print the photo. The converter from Pandigital is useless unless the Vista updates can 'cure' photo gallery. What do you, Microsoft?

  Tried to upload a .jpg from an SD card image (the image was scanned with a Pandigital Photo converter, slide, negative (model # 05 PANSCN).) This message appeared in the photo gallery, "Photo Gallery can't open this photo or video. This file format is not supported, or you do not have the latest updates to the photo gallery. "I inserted the SD card even in a HP Photosmart C6280 printer; the printer has recognized the file and print the photo. The converter from Pandigital is useless unless the Vista updates can 'cure' photo gallery. What do you, Microsoft?

  =====================================
  Just one question... when done scanning and recording of the scans...
  you select the options to reduce the file size by compressing
  the photos?

  If you have only a few of these scans... you could open their
  one at a time in Windows Paint and go to... File / save as...
  Enter a new name, choose a backup folder and choose .jpg.
  This will create a new version of the same photo and I suspect
  It will be compatible with Windows Photo Gallery.

  Also... it may be interesting to try to install Windows Live Photo Gallery.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Windows live Photo Gallery
  http://explore.live.com/Windows-Live-Photo-Gallery
  (There are other applications included in the download...
  Uncheck the ones you don't want)

  No guarantee... but there is a possibility that reinstall
  DirectX can improve this problem.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  End-user Runtime Web install DirectX
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• SIM card is not supported in the activation

  I have a question about activating my iPhone with a different SIM card. I have an unlocked iPhone and I tried to use another (of another carrier) SIM card with it. However, the phone will not turn on and I got an error message indicating that the SIM card is not supported by the initial activation and it isn't a hardware problem. He advised me to call my carrier. So I called my operator and the customer support agent has confirmed that my iPhone is indeed open. Now I'm really confused as to why the other carrier's SIM card is not supported. All SIM cards I've tried with my current provider works with my iPhone. All other SIM cards from other telecommunications companies does not work (I tried 3 others).

  Then the phone is not unlocked. Have you asked an unlock of your carrier and they gave him? If Yes, do restore you the phone to factory with iTunes and receive a "congratulations, your phone is now unlocked" message? If this isn't the case, then the unlock code is not complete. You must restore the device with iTunes at the factory, not a backup. When you get the message "Congratulations", you can restore your backup.

• I have connected my iphone3g to itunes and it asked if I want to improve, and I agreed. Now, the phone is locked, indicating that my sim card is not supported. What can I do?

  . I have connected my phone3g to itunes and it asked if I want to improve, and I agreed. Now, the phone is locked, indicating that my sim card is not supported. What can I do? Can I uninstall the upgrade and bring him back as it was?

  Please help my phone is now dead.

  Thank you

  Your question has already been answered twice. Asking again will not change the answer.

• My Satellite A100 does not support SDHC cards with the internal card reader

  Hello

  My Satellite A100 can't stand my sandisk 4 GB SDHC.
  'normal' SD cards are not a problem with the internal card reader, and there is no problem with the 4 GB sandisk SDHC card using an external card reader.

  is there a software solution?

  regrads,
  Itock

  I don't have the time to read the manuals for your model of laptop users, but can be registered to all supported cards. I guess SDHC not registered and not supported.

  I don't know what you mean with the software solution, but as far as I know, update for multimedia card reader is not available.