Question of grouping NIC

Similar Questions

• Oracle reports above question Designer group

  I am very new to Oracle Reports Designer but I've created a report over the Group and I wish I could hide some data and their labels based on a condition, for example, if fieldvalue - displays some data but hide other, make visible or invisible based on a State. Is this possible? If so, any help would be appreciated.
  Thank you.

  968277 wrote:
  I am very new to Oracle Reports Designer but I've created a report over the Group and I wish I could hide some data and their labels based on a condition, for example, if fieldvalue - displays some data but hide other, make visible or invisible based on a State. Is this possible? If so, any help would be appreciated.

  Yes! You can. But you will need to provide some information at least during the validation of any question.
  What are you the version of your report?

  in general, select data showing the field and press F11 to go code editor and you will see

  ........
  begin
  return (true);
  end;
  

  Write here your condition and display and hide it. Ditto for the labels. For example

  ..........
  begin
  if condition ture
  return (true);
  else
  return (false);
  end if;
  end;
  

  I hope this works...

  Hamid

  Mark correct/good to help others to get the right answers. *

• Question about Group by

  Hello friends,
  
  I have a table called APPLICATIONS (INQUIRY_ID, CALLING_DATE, ASSIGN_TO_AGENT)
  
  I need to create a report to show the number of requests received by Agent as follows:
  

  Assign_to_agent , number_of_daily_inquiries, total_inquiries_number
  
  X               ,         4                 , 150
  Y               ,         8                 , 200
  ..........
  ....

  I used this query that does not work:
  

  select assign_to_agent   ,
   count (inquiry_id) , 
   (select count ( inquiry_id)   as "total_inquiries_number"
   from inquiries   where trunc ( calling_date,'DD' )= trunc ( sysdate, 'DD')  ) as "number_of_daily_inquiries"
  from inquiries  group by assign_to_agent

  I hope that my question was clear.
  
  Kind regards
  Water
  
  Published by: cold_water on 25 Sep 2012 10:23

  Hi cold_water,

  Maybe it is not necessary to query two times table. Something like

  select   i.assign_to_agent,
           count (
             case
               when trunc ( i.calling_date, 'DD') = trunc ( sysdate, 'DD') then
                 i.inquiry_id
             end ) as "number_of_daily_inquiries",
           count (i.inquiry_id) as "total_inquiries_number"
  from     inquiries i
  group by i.assign_to_agent;
  

  Concerning
  Peter

• Question about GROUP BY and double aggregation for example MAX (AVG (val))

  Good evening/morning,
  
  I am struggling with what is probably a simple problem.
  
  The objective of the exercise is to display the highest average earnings and his Department (with the EMP table).
  
  Easy to get the maximum average wage:
  

  select max(avg(sal)) as max_avg_sal
    from emp
   group by deptno;

  I could not figure out how to change this query to get the deptno associated AVG. max. Gave up on changing this query and came to this:
  

  select deptno,
         avg_sal as max_avg_sal
    from (
          select deptno,
                 avg(sal) as avg_sal
            from emp
           group by deptno
           --
           -- order causes 1st row to have the max(avg(sal))
           -- this will be exploited in the where of the outer query
           --
           order by avg_sal desc                                             
         )
   --
   -- get only the first row since that one has the values we want
   --
   where rownum <= 1;

  This works, but feels pretty disappointing compared to the simplicity of the first query (which I couldn't the deptno on.) That is the request more simple with that I could come.
  
  The QUESTION is:
  
  The query above is really the way simpler and easier to get the maximum average and its associated department number? If it isn't, I'm more interested in your simplest solution. :)
  
  Could someone to laugh at one of the alternatives that I came up with a "simpler": solution
  

  with x as
    (
     select deptno,
            avg(sal) as avg_sal
       from emp
      group by deptno
    ),
    max_avg_sal as
    (
     select max(avg_sal)                  as asmax
       from x
    ),
    deptno_max as
    (
     select deptno                        as dnmax
       from x where avg_sal = (select asmax from max_avg_sal)
    )
  select (select asmax from max_avg_sal) as max_avg_sal,
         (select dnmax from deptno_max)  as deptno_max
    from dual;

  The road to hell is simple, it is paved from selects < chuckle >,.
  
  Thank you for helping,
  
  John.

  Hello
  Try this

  SELECT MAX(AVG(sal)) AS max_avg_sal,
         MAX(DEPTNO) KEEP (DENSE_RANK FIRST ORDER BY AVG(SAL) DESC )  DEPTNO
  FROM scott.emp
  GROUP BY deptno
  

  Kind regards
  Anthony Alix

• Question about grouping.

  Hello
  
  I have a problem with my data as I want, I have 2 tables: orders & Modifiedorders,.
  the Modifiedorders holds the orderid and some information on how the order is changed, sometimes orderid
  in the Modifiedorders table can repeat if the changed data are of different types, such as changing the quantity or the price...
  
  Now what I want is to make a report that displays data from the Orders table and when there is
  record (s) in the table modifiedorders that it should appear on the left, for example, but without repeating the orderid.
  
  What I tried creating a query of outerjoin between 2 tables and using the wizard I created a report with the style of left group and had Orderid as the grouping field, but again orderid. What should I do?
  
  Thanks in advance...

  What I tried creating a query of outerjoin between 2 tables and using the wizard I created a report with the style of left group and had Orderid as the grouping field, but again orderid. What should I do?

  You have made the right choice. Reuse the reports Wizard.

  What is your question?

• installed windows 7, now question about bluetooth NIC

  So, I deleted the installation of vista factory, formatted hard drive and did a clean install of win7 64 bit. Now, I find myself trying to pair a headset stereo bluetooth to my system, after an investigation that he won't, I searched in which nic card I have and original SWSetup installed at the factory of SP39805 file (from vista) but I can't tell if its broadcom, intel or Realtek. How can I know which driver to install, now my seeems wireless to work properly (althoiugh, I'm green at this) with the program of intel, but my bluetooth headset seems pair well, but I cannot hear through the headset and looking for solutions. I think this might be the problem, although in the IDT audio control panel is difficult to grasp as a whole to the top of my helmet, but I need to start somewhere.

  DV7 - 2173cl

  Any thoughts muchly appreciated.

  Ken

  I'll wait a few pictures in the show HP after all this.

  I hope that after all this, that your headphones will work.

• Windows Explorer - library questions: remove groups

  PROBLEM:

  

  ---------------------

  WHAT I WANT IT to LOOK:

  

  I don't know how it happened, but it's really annoying and I want to fix this ASAP. The problem is in my music folder, it shows the text in blue, and I don't want it looking like that. It has never been like this before. It just happened by chance.

  Do a right click, group of > no

• Question to group AD ISE

  Dear team,

  I will deploy cisco ISE (1.2) to one of our customer sites.

  I am able to join the ISE with Active directory and the users are able to authenticate with their domain login ID.

  Problem:-I'm not able to retrieve/see Active directory at the ISE group information.

  Please suggest how to fix this isse.

  Kind regards

  Rajesh

  Hi Renon,

  Kindl take a look at the below mentioned link:

  ISE with AD integration

  Kind regards

  Anim Saxena

  Community Manager

  * Make the rate of useful messages *.

• Newbe question on dual nic host

  I have a HP DL360 G5 with two network adapters.

  What I am looking for is Internet access to all my virtual machines.

  I do a test lab that I don't want to not talk with my corp network.

  I installed esxi 5.1.0X

  vSwitch0 has VM Network on it and networking with vmnic0 as physical map

  vmnic0 is map of networking with IP 10.10.180.5 subnet 255.255.255.0 no gateway

  I have a server control and exchange of the field for test purposes.

  the NIC physical is connect to a port 8 switch so I can plug in laptops to and they shoot great domain controller IP so it's all good.

  I need Internet access to make updates on the servers, I bring some access.

  Now I have a spare internet connection which distributes IP addresses like 96.185.50.X

  I plug which vmnic1 free access to the Internet, but no IP address is assigned.

  He created a VM Network 2 Vswitch1 and vmnic2 is the physical map
  How to assign an IP address the second NETWORK card and how to route Internet traffic between the vSwitches so that VM on the other network of VM can get internet Access

  Is it still possible?

  Thank you

  You could add a 2nd vNIC to each of your virtual machines and attach it to Network 2 VM but this means that each of your virtual machines will need a 96.185.50.X its IP address, you also need a default gateway and DNS on this interface, I guess that it is set with DHCP.

  Or you can create a virtual computer to be used as a router between 1 network of VM and VM Network 2. This virtual machine will have two vNIC, one on VM 1 network and the other on VM Network 2. Give VM 1 network interface a static IP address on your network of 10.10.180.0/24 and use it as default gateway on your other virtual machines so that they use it to get out of the internet. You need to configure DNS on your virtual machines so that they can resolve internet host names.

• questions about group by weeks

  Hello experts

  I have data similar to what follows below

  create the table t_one

  (

  sale number (30),

  date of date_req,

  req_desc varchar (1000)

  )

  insert into t_one values (30, to_date (March 7, 2014, ' DD/MM/YYYY'), 'boston')

  insert into t_one values (to_date 40, (March 9, 2014, "MM/DD/YYYY '"), "New York")

  insert into t_one values (10, to_date (March 14, 2014, ' DD/MM/YYYY'), 'boston')

  insert into t_one values (to_date 20, (March 16, 2014, "MM/DD/YYYY '"), "New York")

  required output

  Week total_sales

  Week 1-70

  Week 2 30

  Please note, the first week will start at 07/03/2014 in the system, that is why it is week 1 and a week is from (Friday - Sunday). That is because the execution is either on Friday or Saturday or Sunday. I have problems with this because I can't think of a good way to group my weeks together.

  any help is appreciated.

  Thank you

  Hello

  Here's one way:

  WITH got_week_num AS

  (

  Req_desc sale, SELECT

  , FLOOR ((date_req-TO_DATE (7 mars 2014 ", «MM/DD/YYYY»)))

  / 7

  ) + 1 AS week_num

  FROM t_one

  )

  SELECT 'week ' | week_num WEEK

  SUM (sales) AS total_sales

  OF got_week_num

  GROUP BY week_num

  ORDER BY week_num

  ;

  This will work with dates before March 7, 2014, also.  The week before week 1 (that is, the beginning of the week on February 28, 2014) week is 0; the week before this (from February 21) is week - 1 and so on.

• I have a question in groups to help decode and case in pl/sql

  my request is something like this but with more column in select. When I shot this request it gives result but it's not good
  
  My problem is, as if there are more than 3 values for uh.sflowtype (0,1,2) then group by does not work for them and those coming in different line, I need them to be combined
  
  query is:
  Select substr (uh.sstartdatetime, 1, 8) DateTime,
  (case
  When uh.sflowtype = 7 then "sms".
  When uh.sflowtype = 9 then 'mms'
  When uh.sflowtype = 10 then "gprs".
  another "voice".
  end)
  as e_vpn_usagehistory flowtype UH where 1 = 1 and uh.nspid = '1' AND ((substr (uh.sstartdatetime, 1, 8) > = 20130507))
  AND (substr (uh.sstartdatetime, 1, 8) < = 20130606)) GROUP BY substr (uh.sstartdatetime, 1, 8), uh.sflowtype
  substr(uh.sstartdatetime,1,8) DESC order
  
  
  result:
  
  DATETIME FLOWTYPE
  -------- --------
  20130507 voice
  20130507 voice
  20130507 voice
  20130507 sms
  20130507 mms
  
  
  but I need
  
  20130507 voice
  20130507 sms
  20130507 mms
  
  so, what should I do?
  Please suggest me

  select  to_char(uh.sstartdatetime,'DD-MON-YY') DateTime
  ,       ( case when uh.sflowtype=7 then 'sms'
            when uh.sflowtype=9 then 'mms'
            when uh.sflowtype=10 then 'gprs'
            else 'voice'
            end ) as flowtype
  from   e_vpn_usagehistory uh
  where uh.nspid='1'
  AND   ((substr(uh.sstartdatetime,1,8) >= 20130507 )
  AND   (substr(uh.sstartdatetime,1,8) <= 20130606))
  GROUP BY to_char(uh.sstartdatetime,'DD-MON-YY'),
            ( case
           when uh.sflowtype=7 then 'sms'
          when uh.sflowtype=9 then 'mms'
          when uh.sflowtype=10 then 'gprs'
          else 'voice' end )
  order by to_char(uh.sstartdatetime,'DD-MON-YY') DESC
  

  Try this.

  If it doesn't work thanks for posting data.

  p.s. Your order will be not that useful as a varchar either

• question about group by function

  Hello
  
  I need to know why when the clause is not used, and the having clause is used in the function group, can any one will contact

  When the clause is used to filter the lines in service come pathological column.
  He selects and filters-out of the lines in the table listed in the from clause.

  for example if you have a table with matching employees and departments, and you want to see all employees of departments 10,20,30,40 and 50; you will use this condition in where clause

  select
      dept_id, emp_id
  from
      employee
  where
     dept_id in(10,20,30,40);
  

  Now let's say you want to check the number of employees in these departments

  select
      dept_id, count(emp_id)
  from
      employee
  where
     dept_id in(10,20,30,40)
  group by
     dept_id;
  

  now, if you need to select only the departments that have more than 1000 employees in them, your query will look like this:

  select
      dept_id, count(emp_id)
  from
      employee
  where
     dept_id in(10,20,30,40)
  group by
     dept_id
  having count(emp_id) > 1000;
  

  Here the condition where clause filters out all departments other than 10,20,30,40,50; the condition that must be applied for further filtering some departments on a per employee basis, cannot be applied in the where clause as it should be applied after + the function group worked on the rows of the table; After calculating the number of employees in each Department. Where the need for the clause which is evaluated after the group by the having clause.

  I hope this helps.

• Question about GROUP BY and HAVING

  Good afternoon
  
  I have the following query, which returns the desired result (a set of students who follow the CS112 or CS114 but not both). I wanted to 'condense' it in a single SELECT statement (if that's possible - DDL of execution of the instruction is provided at the end of this post):
  

  --
  -- is this select distinct * and its associated where clause absolutely
  -- necessary to obtain the result ?
  --
  
  select distinct *
    from (
          select s.sno,
                 s.sname,
                 s.age,
                 sum(case when t.cno in ('CS112', 'CS114')
                          then 1
                          else 0
                     end)
                   over (partition by s.sno) as takes_either_or_both
            from student s join take t
                             on (s.sno = t.sno)
         )
    where takes_either_or_both = 1
  ;

  The following text seemed reasonable, but unfortunately without success:
  

  /*
    Window functions not allowed here (in Having Clause)
  
  select max(s.sno),
         max(s.sname),
         max(s.age),
         sum(case when t.cno in ('CS112', 'CS114')
                  then 1
                  else 0
             end)
           over (partition by s.sno) as takes_either_or_both
    from student s join take t
                     on (s.sno = t.sno)
   group by s.sno
  having sum(case when t.cno in ('CS112', 'CS114')
                  then 1
                  else 0
             end)
           over (partition by s.sno) = 1
  ;
  
  */
  
  /*
  
  Invalid identifier in Having clause
  
  select s.sno,
         s.sname,
         s.age,
         sum(case when t.cno in ('CS112', 'CS114')
                  then 1
                  else 0
             end)
           over (partition by s.sno) as takes_either_or_both
    from student s join take t
                     on (s.sno = t.sno)
   group by s.sno, s.sname, s.age
  having takes_either_or_both = 1
  ;

  I tried a document that completely defines the order in which the clauses are executed. I found bits and pieces here and there but not complete something. I realize that my race with problems like this is due to my lack of understanding of the sequence and scope of the clauses that make a statement. For this reason, I can't even say if it is possible to write the query above using a single select statement. Forgive my little frustration...
  
  Thank you for your help,
  
  John.
  
  DDL follows.
  

          /* drop any preexisting tables */
  
          drop table student;
          drop table courses;
          drop table take;
  
          /* table of students */
  
          create table student
          ( sno integer,
            sname varchar(10),
            age integer
          );
  
          /* table of courses */
  
          create table courses
          ( cno varchar(5),
            title varchar(10),
            credits integer
          );
  
          /* table of students and the courses they take */
  
          create table take
          ( sno integer,
            cno varchar(5)
          );
  
          insert into student values (1,'AARON',20);
          insert into student values (2,'CHUCK',21);
          insert into student values (3,'DOUG',20);
          insert into student values (4,'MAGGIE',19);
          insert into student values (5,'STEVE',22);
          insert into student values (6,'JING',18);
          insert into student values (7,'BRIAN',21);
          insert into student values (8,'KAY',20);
          insert into student values (9,'GILLIAN',20);
          insert into student values (10,'CHAD',21);
  
          insert into courses values ('CS112','PHYSICS',4);
          insert into courses values ('CS113','CALCULUS',4);
          insert into courses values ('CS114','HISTORY',4);
  
          insert into take values (1,'CS112');
          insert into take values (1,'CS113');
          insert into take values (1,'CS114');
          insert into take values (2,'CS112');
          insert into take values (3,'CS112');
          insert into take values (3,'CS114');
          insert into take values (4,'CS112');
          insert into take values (4,'CS113');
          insert into take values (5,'CS113');
          insert into take values (6,'CS113');
          insert into take values (6,'CS114');

  Hi, John,.

  Just use the SUM aggregate function.

  --
          select s.sno,
                 s.sname,
                 s.age,
                 sum(case when t.cno in ('CS112', 'CS114')
                          then 1
                          else 0
                     end) as takes_either_or_both
            from student s join take t
                             on (s.sno = t.sno)
         GROUP BY  s.sno,
                  s.sname,
                s.age
         HAVING  sum(case when t.cno in ('CS112', 'CS114')
                          then 1
                          else 0
                     end)  = 1;
  

  Analytical functions are calculated after the WHERE - HAVING clause are applied. Use the results of an analytic function in a WHERE or HAVING clause, you need to calculate it in a subquery, and then you can use it in a WHERE - or the HAVING of a query clause Super.

• Exit question any group

  OK guys... I wrote a dynamic hierarchical menu using CSS. My problem is that I have 6 items in main menu and each item has submenus. I have it ready to go in theory, but my cfoutput keep repopulate the first entry.
  
  
  I hope someone can help as soon as POSSIBLE. I have 6 of the same thing.
  
  JG

  jgethers wrote:
  > It works well, but it will not output 2 3 4 5 6.

  He gets them in the first place. That's the problem, not the output.

  Is there really records of pagecontent for parentID values 2, 3, 4, 5, or 6? If this is not the case, those these menu items will not appear in the results because you use a JOIN INTERNALLY.

  Try changing the INNER JOIN a LEFT JOIN. This will include all records from the table on the left hand (IE cssmenu) even if there is no matching record in pagecontent.

  If this does not help, run a select statement on the tables separately and cfdump the results of two queries.

• QUESTION OF GROUPING

  Hello
  I have 4 different queries and I need the output to a table where the 1st column a Description that I will choose for example A, B, C, D and the 2nd column is the result of 4 queries. For example:
  
  A (result of the query 1)
  B (2 query result)
  C (3 query result)
  D (4 query result)
  
  Thank you!
  
  Published by: drbiloukos on Αυγ 18 2009 08:15 πμ

  select 'A' col1,(your first sub query) col2 from dual
  union all
  select 'B',(your second sub query) from dual
  union all
  select 'C',(your second sub query) from dual
  union all
  select 'D',(your second sub query) from dual
  

  Ravi Kumar