Satellite 1800-921: antenna integrated behind the screen?

Can someone tell me if the Satellite 1800-921 has an antenna behind the screen?
Thank you
Peter

I guess you mean a kind of antenna? As far as I know behind the screen is placed antenna WLAN for supported models with WLAN connectivity.

I wasn't able to find info on Satellite 1800-921, but if the unit is supplied without WIFI I guess that there is no WLAN antenna behind the screen. By the way: I believe that the Satellite 1800 series is delivered without a WLAN option.

Tags: Toshiba

Similar Questions

  • Satellite Pro 2100 two cables behind the screen

    Hi, first post so be gentle with me please.

    I have a Satellite Pro Satellite Pro 2100 and the hinges are shot, so I bought a 2100 piece to Exchange.
    Everything was ok except that I have two sons that I can't find a place to plug in. A black white and they are attached to the small square gold Ribbons that are glued to each top corner at the back of the screen. The other ends have little, but when I stripped the laptop they were in bulk and I do not see where they are going.

    However, the laptop works fine without them.
    Can anyone help please?

    All laptops with WLAN have this. WLAN antenna is placed behind the screen and these two wires must be connected to the WLAN antenna.

    If your laptop doesn't have WLAN card put just the cables aside and everything will be OK.

  • On the Satellite 1800-921 black screen problem

    Hello
    My satellite 1800-921 has started to give me a black screen after I turn it on. It loads well, go to the desktop and then the screen turns white and I can't make it respond. We can just distinguish the dialogs on the screen so I don't know if it is a screen problem or things I see on the screen are just ghosts...
    It's a bit worrying!
    Does anyone else have this problem? So far, it seems to happen when I turn it on. Usually, I have to turn it off and reboot to get it back and then it works very well.
    Thank you
    Nancy :)

    Hello

    to the old series, it may be that the FL inverter is broken or damaged the tupe of backlight. In both cases, you can see the screen but without backlight!

    To differi if it is a hard - or software error, you should start the laptop and ESC immediately to enter the BIOS. Then the machine must be running half an hour in the BIOS. When the rupture occurred it is quite sure that some hardware is broken. Otherwise, it is a software based and a restore with recovery CD Toshiba should solve the problem!

    Goodbye, TOK

  • Satellite 1800-921 - what memory I need?

    Hello

    I have a toshiba satellite 1800-921. The hard drive is broken and I managed to get my hands on one. My problem is. Is that I want to upgrade the memory on this subject but I can't know what kind of memory stick that I need.

    I searched the forums and the site with no luck. Think im going blind... haha. Is could someone please tell me what I'm looking for or maybe even a Web site that I can buy an of? I am from the United Kingdom.

    Thanks in advance for any help you may be able to give me jay

    Hello

    Satellite 1800 is old enough for laptop... I searched a bit using Google and it seems to PC100 SDRAM SODIMM for her, but you can also choose PC133 modules, they will also work with low speed PC100.

    I m not sure how it supports RAM, but I think 512 MB maximum for this oldie

  • Satellite 1800-921: error - Insert System Disk in Drive, Press Any Key when Ready

    Hello
    I bought a satellite 1800-921
    He had no disc driver/OS with the operating system that was on laptop was errors.
    So I decided to install my own copy of win xp pro.

    After installation and 1st reloads everything seemed ok, but now whenever I switch on the laptop it just displays

    Insert system disk in drive
    Press any key when ready

    I tried a win 98 disk but always appears with this error
    any help would be greatly appreciated
    Thanks in advance
    Cheech Chong

    Hello

    Seems that the laptop can not find the bootable source.
    This means that the HARD drive is malfunctioning or the boot sector is defective.

    By the way; have you tried to change the boot order in the BIOS?

  • Re: upgrade memory for a Satellite 1800-921 PIII 1.1 GHz...

    I am trying to find the memory upgrade for my Satellite 1800-921 PIII 1.1 GHz... Part number: PS183E-00HTT-EN.
    The vehicle is currently a Nanya 256 MB SDR 133 Mhz - CL3 and I undestand it can be upgraded with an additional 256 MB card.
    The only problem is that I can't find a compatible! Any ideas what's need & where I couldn't leave?

    Hello

    The compatible module is PC100 256 MB with PA3069U - 1 M 25 part number.

  • Satellite 1800-921 material updates

    Hello

    My daughter received a Satellite 1800-921, but it needs to be updated.

    I need to allow him to become compatible wireless and also update the RAM.

    In addition, they are easy to do?

    Thank you

    The update of the RAM is possible. You can update for max max 1024 MB and these modules can be used:
    PC100 256 MB (PA3069U - 1 M 25)
    PC100 128 MB (PA3005U)
    PC100 64 MB (PA3004U)

    The situation with the WiFi network is a little different. The laptop does not support any card of minPCI of WLan and the internal upgrade isn't possible.
    But you can use a USB WiFi key or a PCMCIA Wlan card.

  • What spec RAM required for Satellite 1800-921?

    If anyone can help with suggestions to increase my RAM. Crucial say its obsolete!

    Hello

    The modules are obsolete? I put t believe that!
    Satellite 1800-921 simply uses modules SODIMM 144 pin PC100 and you should check out some offers from online dealers.
    I m you will find something interesting!

    Oh the laptop supports max 512 MB and that's why you can use modules of 2 x 256 MB max.

    Greetings ;)

  • Portege 4010 - brands behind the screen

    Hello
    I, ve just had two of them, and they all have two points behind the screen. Almost looks like mold or a spill inside the surface, they are not trademarks of electronic type (pixels dead etc.). Can I access the back of the surface before disassembling the lid or isolating this part of some kind of glazing.
    considers that Mick.

    Hello

    I can just imagine what it could be. I checked a few websites on this unit but I put t found no point. If you think that it s a hardware fault, so you should ask ASP for more information and help.
    But you shouldn't t open or remove covers on your device

  • Popup PlayBook come behind the screen

    Hello

    I m development app playbook by using the web works. The problem I m facing here "drop popups list" are behind the screen in the real device...

    I don't see the problem in Simulator playbook...

    Here the snap shotlaybook popup problem

    Hi, have you tried to disable your splashscreen at startup? If it is not depended on splashscreen, you should make a comment about GitHub.

    Best regards

  • FIXED dust behind the screen of x 220

    Hey guys I've had this laptop for about 2 months and today I noticed there is dust in the corners, behind the screen, im a little KNOCK and that kind of things make me crazy

    any advice is very apprecated, thanks guys


  • Satellite 1800-804: how to change the standard screen?

    Hello. I'd be very grateful if someone out there could help me. I have a 1800-804 Satellite which I removed the screen and instead connected to a screen size of Compaq and it works very well for the last 12 months so much so that I use it as my main office.

    My problem started when I downloaded a movie and I wanted to watch it on my tv. I went in the set up screen and it goes from 1 to 2 (because told me in this way that would turn screen to the TV screen).
    It was my mistake.

    Now I can't get it reversed back to the normal screen. The on-screen display, it's as if it is in ECONOMY MODE (large icons) that can only make?

    Thank you.

    Hello

    Which screen has low resolution? The external monitor or laptop screen?
    I guess you display resolution has been set to the lowest value.
    The resolve you should go in the graphic properties and select the view then increase the screen area and colors.

    Also check the advanced option. In the peripheral view tab, you will find the different options and device monitoring multi section where you can set the parameters on screen LCD/CRT or LCD/TV

    Check it out.

  • Satellite 1800-921-Maximum extension

    I have a 1800-921 Satellite running Windows XP. It starts and works fine, but as soon as I put the antivirus software on it slows down to a crawl. I want to improve its performance, but have the recommended Maximum 512 MB system memory. Can I wear this in any way to make the laptop run faster?

    The hard drive has been defragmented and 8 of it is 20 GB free.

    Is there anything else I can do?

    It will be interesting to know what antivirus you have installed on your machine.
    In my opinion the best anti-virus is AVIRA antivir. He doesn't need a lot of resources and works perfectly on Windows XP Home edition.

    Back to your question.
    I know for sure that the Satellite 1800-911 can be upgraded up to 1 GB of RAM, so I think that your Satellite can be upgraded to 1 GB.

  • No Satellite Pro 6100 no response from the screen

    Can anyone help?

    My 6100 Pro Satellite lit last night then automatically went into hibernation, despite being connected. Now when I turn it on there is no response from the screen, but if I plug a monitor to the laptop, the screen works (as long as I start in safe mode)

    Can anyone help?

    Hi Simon

    Disconnect all cables from the laptop and remove the battery.
    Wait a moment more (20 min) and reconnect the battery and the AC adapter.
    Then check if the laptop turns on and if the display works fine

    Good luck

  • Satellite M70-339 vertical lines on the screen

    Hello...

    I have a Satellite M70-339, which will show only the vertical lines on the screen.
    I connected an external monitor and booted in safe mode.
    I uninstalled the display drivers.
    I started to monitor and reinstalled the display drivers.
    The computer will now boot up screen.

    I put the display to indicate to both monitor and screen.

    On the monitor, all right.
    On the screen, I get vertical lines color, similar to a wallpaper (wallpaper is not pretty).

    Did anyone has got any ideas what could be the problem, or how to diagnose the problem
    Any help would be appreciated.

    John C

    If everything is OK on the external monitor that is the best evidence that this problem is related to the internal LCD. Display must be exchanged.

Maybe you are looking for

  • Convert labview 2010 for 2009

    Hello Can someone convert the file of labview 2010 version of labview 2009. Attached file as an attachment. Thanks in advance Owen

  • How do I reinstall my acer crystal eye webcam

    I recently updated my software to alienware, but the webcam is not working. I have an acer aspire 4530. can u help

  • Drivers XP for HP Pavilion dv6215ea

    Hi all! I need drivers for HP Pavilion dv6215ea xp. On the page (http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=it&dlc=it&cc=it&product=3366705&lang=it) xp driver is not something useful. On vista (http://h10025.www1.hp.com/ewfrf/wc/softwa

  • Windows 8 Netflix and App Store do not work

    I have an Asus Q200E PC Netbook and when I try to use the Windows 8 Netlfix application or the app store of Windows, he says I am not connected to the internet, but I can still use my PC screen and surf the web very well so use my other Windows appli

  • Lightroom on ipad

    HelloI have a desktop version of lightroom 6. I would like to make slide shows or fotocollections which I can easily synchronize with my Ipad, without export and import them to Iphoto. What possibilities do I have?Thanks for your helpMarkus