Question of OptiPlex 790 Displayport

Similar Questions

• OptiPlex 790 Mini-Tower bi-ecrans?

  I have an Optiplex 790 minitower with Intel HD 2000 integrated and i5-2400 video.

  The case has a VGA and Display Port connector, I am currently using the VGA port. I am a student going for a Setup dual monitor and am confused if I can do without having to buy a discrete video card. I read conflicting reports that some say Yes and some do not. Can a kind soul please one way or the other?

  I do not use the PC for games, it's a casual work with video and web browsing. I need mainly two monitors for editing multiple files, scripting, programming, database etc..

  Many thanks, flipper.

  Hi end,

  Embedded video solution of OptiPlex 790 is VGA and DisplayPort compatible at the same time. You can connect two monitors to the computer without adding a discrete card.

  Please let me know if you need further information.

• Lack of Dell Optiplex 790, PCI Simple Communications controller driver

  Performed a clean installation of Windows 10 Pro on my Dell OptiPlex 790.  Everything went well and all device drivers have been installed except one, the Intel AMT - GROUND device.  The vendor id is 8086 and the device id is 1C3D.  Can help you with this question?

  Thank you.

  -Jim

  It seems that it is the Intel Series driver LAN.  Your computer was never tested by Dell for Windows 10, which means there is no new driver created by Intel, etc., that can work.  You can google Intel AMT/GROUND and see if Intel has a driver for your chipset that can work.  It looks like Dell stopped supporting your computer for Windows 8.0

• Dell optiplex 790 and windows 8

  Hello guys

  What is windows 8 pro compatible with Dell optiplex 790?

  Are there problems with it or not so if I buy windows 8 pro 64-bit, how can I install the drivers?

  Hi raedov

  790 OptiPlex systems have been tested to support the upgrade of Windows 8. The 790 does support upgrading to Windows 8. You can also visit the below mentioned link for more help:

  http://Dell.to/XS5X49

  Before moving to windows 8, you can also run the Windows 8 Upgrade Wizard. It scans your current PC to see if it is ready for Windows 8 and provides a compatibility report and optional steps to make you buy, download and install Windows 8. Please click the below mentioned link to download the Advisor:

  http://bit.LY/Sz6gJP

  Regarding your second question I'll get back to you within 1 or 2 days.

  Please let me know if additional assistance is needed.

  Thank you & best regards
  Prateek K
  #iworkfordell

  For easy access to the drivers, manuals and updates, please visit our Support site  

• Hard drive support Dell Optiplex 790 (installation SSD 2.5 ")

  Hello

  I intend to install a new 2.5 "SSD in my Dell Optiplex 790 (mini lathe). Unfortunately, the original hard drive carrier (3.5 "?) was lost.

  As the number of hard disk media (Dell) is quite overwhelming me, I would be very happy to help to find the bracket.

  Laborec

  DN8MY = set of support from Caddy drive 3,5 '' hard
  R494D = support for 2.5 hard drive Caddy Assembly "

• OptiPlex 790 SFF need service tag

  I bought an Optiplex 790 SFF skeleton and found out that it doesn't have a label service all over her. How can I get a serial number for it? I can from Dell?

  Latest version of the BIOS for OptiPlex 790 is here. Serial number shouldn't matter...

  Read and follow the instructions carefully and turn off anti-virus suite first, if you install it in Windows.

  Keep in mind there is always a small chance a BIOS update fails and kill the motherboard. So upgrade at your own risk...

  Assuming that ST has not been removed from the BIOS, you should be able to find by using the free version of Belarc Advisor.

  EDIT: ieee488 types faster as I do!

• Power supply Dell Optiplex 790 SFF cycles power on and off when it is plugged

  My new to me SFF Optiplex 790 does not start - pressing power causes a switch to send amber for a few seconds, the 1 + 2 diagnostic lights shine briefly, and then the system turns off. But wait... with power plugged in, it will try to restart every 10 seconds or until I have unplug the unit.

  System lasted about 30-40 minutes when I tested it, but it starts then power cycling.

  Power supply passes with built-in 'green light' regardless of any internal or external devices connected. I bought a sweater 'work' PSU, no change.

  Ideas for testing? System is stock, no mods or upgrades of what I see.

  Hello

  This system is out of warranty period so that any replacement of parts will be payable. That's why we can help you with the replacement of the part by sending the request for quote for parts and service or, Alternatively, you can buy the part of any provider of local service from dell.

  Serial number of the system also has information on the customers system so donot share it as a public message, send it out via private only message.

  Kind regards

• RAID0 en Dell Optiplex 790

  Buenas tardes!

  Estoy queriendo usar una Optiplex 790 como backup servidor, por lo that I need armar discos in RAID 0, y queria Saber TR are posible. Porque por lo than Biogen verificando via not web, none are posible.

  MUCHAS Gracias!

  Hi GFurlani,

  It is my understanding that the Intel Q65 chipset does not support RAID. If you need to add a separate controller card that supports the data disks in a RAID.

  Good luck!

• OptiPlex 790 guard lock

  We have a customer who bought an Optiplex 790 a year ago and continues to have a problem with it locking up. We have changed the settings, will not hibernate or stop the hard drive and also flashed the BIOS to the latest version. All diagnostics have been run, but no problems were discovered. Sell support suggested to reinstall the operating system (windows 7 pro). Has anyone out there experience this problem before, and if so, what was the resolution?

  Hi midstate.

  As the system freezes at random, try the steps from the link: http://dell.to/hVl6Xn

  I suggest you to check the functionality of the computer in safe mode with network, check in Mode safe mode with network follow it mentioned below as follows:

  1. Restart the computer.
  2. Keep tapping F8 on Dell Logo screen.
  3. Once the computer enters Advanced Boot Option, select Mode safe mode with networking.
  4. Press ENTER.

  Check if the computer freezes in safe mode with network and answer.

  Also please check if the computer displays the stop error codes and include in its response.

  I would like to know if you have tried to do a system restore, if it is not please try to restore the system to the date when it was working fine.

  To perform a system restore, follow these steps:

  1. Restart the computer.
  2. Type during startup until the Windows Advanced Options menu is displayed.
     Press on/ and highlight repair your computer is highlighted, and press .
  3. In the System Recovery Options window, click to select your language and then click Next.
  4. Log in as a user with administrative rights, and then click OK.
  5. To choose a recovery tool menu, click System Restore.
  6. In the system restore window, click Next.
  7. Click the show restore points plus box of 5 days for a complete list of restore points.
  8. Click to select a restore point.
  9. Click next and then click Finish.
  10. Click Yes in the confirmation window.
  11. Click on restart after System Restore finishes successfully.

  Check the functionality of the system and view the results.

• ESXi install on dell optiplex 790

  Hi experts,

  
  

  1A tried to install Native Vmware Esxi 5.1 OS on Dell Optiplex 790, reported Installation Wizard not found supported network cards.

  2. I tried Esxi custom Dell installation 5.1 on the same area, then received the same error message.

  
  

  sounds like network drivers is not included in both of the Esxi Images, any idea on this issue.

  
  

  Error message 'no network adapters detected' when installing ESXi on Dell PowerEdge servers 12th generation - Dell Dell TechCenter - TechCenter community.

  
  

  
  

  Dell optiplex 790 got the intel pro 100/1000 cards.

  
  

  Even when I installed RHEL, it's the same thing, but fortunately RHEL does not stop in the Setup Wizard if the card is not supported. After the Installation of OS RHEL. I installed the e1000 driver. It works very well.

  
  

  VMware should have the same opportunity to install drivers after installing ESxi OS.

  
  

  
  

  
  

  If you do not have a suitable driver for the specific NETWORK card package, you can use Image Builder to create a custom ISO Setup / CD. Take a look at http://www.v-front.de/p/esxi-customizer.html , which greatly simplifies this task.

  André

• Form factor of the Board mother OptiPlex 790 DT?

  Hello

  What is the form factor of the motherboard used in Optiplex 790 (DT)?

  Can I use a card mother microATX? It to be precise.

  THX.

  It is mATX, but you may need mode to your own panel connector before (switch, power, light etc.).

• OK to put a x 8 Geforce video card into a x 16 slot (Optiplex 790)?

  I want to put a card Geforce 630 Rev.2 in my Optiplex with Windows 7 790, but he wants a 8 x slot, and mine is 16 x. It will be OK? I just want to be 100% sure that I can't return the card if it won't work.

  I want this card as it is cheap, only 25W and has 384 cores! Sounds ideal for me.

  Link to the version of the map: http://www.ebay.co.uk/itm/Palit-NEAT6300HD46-2080H-PALIT-2GB-GEF-GT-630-DDR3-SILENT-/380742818658

  Thanks for any help :-)

  Amount of the fine, but it does not work at 16 X speed.

• Driver of Bus SM Dell optiplex 790 problem

  Hi all

  Another system, I had to upgrade to windows 7. Everything works, but I get frequent error of missing under devices SM bus. Its possible maybe I installed the wrong firmware or missed a chipset driver. I did an analysis of the system and chipset driver and driver management Intel that is used by this PC offered by Dell. When I try to install these drivers, however, I get an error of failure as shown below. Can someone point me to the right of the optiplex chipset driver 790 or update the SM?

  

  Error when you try to install the chipset driver

  

  32 - or 64-bit Win 7?

  For 64- bit:

  1. Chipset v9.2.0.1019 (looks like a newer version that you tried to install)
  2. Intel Management Engine
  3. Unified Intel AMT 7 management engine
  4. Driver NEC USB3

  If necessary, restart in Mode safe to install the Chipset.

• help upgrading CPU in optiplex 790

  I want to change my processor (Intel Core i3-2100 processor 3.10 GHz) to a quad processor I don, t know how can do or what quad intel should I get i am such a noob that stuff can you help me

  Keep in mind that I have installed HD6570 and 4 GB of ram that I do, t if this is going to be a problem with the power supply

  I have a 790 DT that came with an i3-2120. If I use an i7-2600, there is no video output. If I replace the i3-2120, it works again.

  Why do you say that the i7-2600 is supported?

• OptiPlex 790 turns on and off by itself randomly

  It does not follow a pattern, just randomly, but it turns on or off as if the button is pressed.

  I tried to remove all the wires, cleaned the whole PC and gently touch the power button or attempted to verify if shaking her PC will make the question (like a wire making short films, but this only makes the problem), but it keeps 'touch' power by itself (is not a forced shutdown, as Windows shuts down as when you press the power button).

  I don't know how to remove the power button, and I'll try to turn on the PC and a little thread of the motherboard power button or delete during startup (Yes, he died while the BIOS is booting).

  Thanks Lynda, I found as the power button (the cord or the plug, I'm not exactly) is the problem, I set up Windows and do nothing when it is pressed to keep it, but I have to unplug the power adapter for let not the PC turn itself, I will consider how to fix the button/wire/plug.

  Thank you very much once again for your support again :)