Question of reconstruction ACS1113

Similar Questions

• DG - complete reconstruction of the question of the installation

  Hi all
  
  I'm looking to rebuild the configuration spfile/dataguard whole, Carrie for a current primary/secondary dg environment.
  
  My question is about the question to know if I can stop simply Broker + transport newspapers, stop both their start up with the spile files newly built without having to recreate the database physical standby?
  
  Thanks in advance
  
  Jan S.

  jstem1177 wrote:
  Hi all

  I'm looking to rebuild the configuration spfile/dataguard whole, Carrie for a current primary/secondary dg environment.

  My question is about the question to know if I can stop simply Broker + transport newspapers, stop both their start up with the spile files newly built without having to recreate the database physical standby?

  Thanks in advance

  Jan S.

  What is your version?
  There is notion of reconstruction/recreate the Dataguard broker.
  This remark to recreate--> * Step By Step how to recreate Dataguard Broker Configuration [808783.1 ID] *.
  or
  check that mseberg mentioned notes with step by step how to create a Configuration of Dataguard Broker [984622.1 ID]

  But why you think SPFILE? It's just a configuration file. What you want to change it? Are there changes in the parameters of sleep? All the sleep settings are dynamic parameters except DB_UNIQUE_NAME, I guess...

  If you have decided to change SPFILE, then

  (1) disable the primary log shipping
  1.1 drop Broker configuraiton on primary & eve
  (2) stop the day before
  (3) make changes SPFILE
  (4) startup mount
  (5) configure broker
  (6) allow log on primary shipping & start MRP pending.

  HTH.

  Published by: CKPT on June 15, 2012 12:09 AM

• Reconstruction image question

  Hello

  As a test set up, I created a BMP image, which I may break down and you want to rebuild.

  Decomposition:

  In table 1 d, 30pixels at the same time, line-by-line (180 pixels wide image = 6 iterations) as can be seen in the first loop of the image.

  This is why the first 30 items of table 1 d will be pixel 0,0 - 0.29, thirty next will be 1, 0-1, 29 etc.

  I then try to reconstruct the image, and looks like it works except for the last row of 30 pixels, where the picture is WEIRD Stuff, looks like asymmetrical...

  I have attached the two my labview code and the image of the reconstructed image.

  Decomposition is a bit confusing, and if necessary I can provide a description of the photo.

  Thank you.

  Yes, your bug was in the first loop. Here's what I would do instead.

  (I modified to make it work on the png and without the color card). There are a lot of things that can still be improved, but this should help you get started.

  I think that the use of "insert" into array in your last loop is incorrect, because it pushes the elements of the initialized array, making the result twice the size. Replacement table subset seems more correct now to the initialized size table.

• Virtual reconstruction Center 2.5 Server vCenter 4.0 question...

  I want to rebuild my BONES Virtual Centre current W2K3 to W2K8. Then, I want to install vCenter 4.0 on the newly rebuilt server.

  I also have my Virtual Center SQL DB on a remote server. My question is when I reinstall vCenter can I simply recreate an ODBC connection and then point it to the DB of OLD Virtual Center?

  It can also be useful

  http://KB.VMware.com/kb/5850444

• vCenter 5.5 reconstruction Question

  Hi all - I inherited a platform VMware 5.5, vCenter services are overall about 6 servers - all roles as SSO, etc. of the inventory are on individual servers.  It's only a small environment and I think it's a little overdosed and costs licenses of Windows etc.

  I intend to rebuild the vcenter server for all services on a server, this is how I intend to do - what can we see and traps?

  Stop all services on all servers

  uninstall the reboot & vCenter service

  Installing vCenter with all components of the vcenter server original box (so it will be the same IP & hostname)

  Copy the original SSL certificates & change the unique ID of the original

  Isn't it?

  Begin to clean install?  or are you keeping the existing vcenter database?  If you do not plan to keep the old server vcenter, so you can just a building a new server with all installed services, make sure that you spec your VM accordingly, re-create your clusters, discount esxi hosts to vcenter old and connect again vcenter.

  If you want to keep the existing database, reinstall vcenter and keep existing data base + VMware KB: re-score and the reinstatement of VMware vCenter Server 5.1 / 5.5 and components there is no need to copy on ssl certificates if they are self-signed.

• Reconstruction of .xml - do not keep my tags

  I love to sort the albums in my library by artist, and then the date, and to display this way on my iPod.  To do this, I wrote a Python script that is supposed to add tags "make Album" in the file of exported xml iTunes Library, with the format "artist-Album of the YEAR.

  It's a primitive script, but I can tell this should work at least.  But when I rebuild my iTunes library since the updated xml file, it rebuilt just as it was before, without my Album out new tags.

  Here is an example of the updated xml file the:

  		< key > 1645 < / key >
  		< dict >
  			Track ID < key > < / key > < integer > 1645 < / integer >
  			< key > name < / key > < String > Tombstone Shadow < / string >
  			< key > artist < / key > < String > Creedence Clearwater Revival < / string >
  			< key > Album artist < / key > < String > Creedence Clearwater Revival < / string >
  			< key > composer < / key > < String > John Fogerty < / string >
  			< key > Album < / key > < String > Green River < / string >
  			< key > type < / key > < String > Rock < / string >
  			< key > type < / key > < channel audio file > MPEG < / string >
  			< key > size < / key > < integer > 7129216 < / integer >
  			< key > total duration < / key > < integer > 218644 < / integer >
  			< key > disc number < / key > < integer > 1 < / integer >
  			< key > disk count < / key > < integer > 1 < / integer >
  			< key > track number < / key > < integer > 3 < / integer >
  			< key > track count < / key > < integer > 14 < / integer >
  			< key > year < / key > < integer > 1969 < / integer >
  			< key > update < / key > < date > 2014-03-05T 02: 43:58Z < / date >
  			< key > Date added < / key > < date > 2016-06-11T 15: 35:16Z < / date >
  			< key > bitrate < / key > < integer > 256 < / integer >
  			< key > sampling rate < / key > < integer > 44100 < / integer >
  			< key > standards < / key > < integer > 5690 < / integer >
  			< key > County work < / key > < integer > 1 < / integer >
  			< key > Album sort < / key > < String > Green River Creedence Clearwater Revival 1969 < / string > < key > Persistent ID < / key > < String > 3962D1A1CF08D178 < / string >
  			< key > track Type < / key > < String > file < / string >
  			< key > location < / key > < channel er%20Revival/Green%20River/03%20Tombstone%20Shadow.mp3 > file://localhost/E:/Music/iTunes/Creedence%20Clearwat < / string >
  			< key > statement of case file < / key > < integer > 4 < / integer >
  			< key > folder County Library < / key > < integer > 1 < / integer >
  		< / dict >

  As you can see, the Album and Persistent ID sort keys share a line.  I don't know if this is important; I think I could solve this problem if that's the problem.  However, I tried manually add a line break after the tag Album fate and then rebuild the library again, and he didn't keep the custom tags.  Indeed, when I check "XML part" in preferences, it exports the xml without any of the tags New Album out (which makes sense, since they do not appear on the securities themselves).

  Can someone tell me what I am doing wrong?  I have found surprisingly little documentation in-depth on exactly how the iTunes library xml is parsed, so I really don't know how picky, it's command, line breaks, etc.

  Reconstruction from the XML does not update the tags in the songs. As soon as iTunes reads the tag of the file in question any external change you make is rejected. A better approach would be a modified version of my script KeywordsToAlbum wrote in SortAlbum instead, which interprets < SortAlbum > to mean the current value of the Album of the sort. The following input string would be set the values you want:

  -< SortAlbum > < artist > < year > < Album >

  You can fix it yourself if you want. I'm just on my way, but I'll post a new script later in the day.

  TT2

• Portege Z830 - restoration and reconstruction

  I have a Portege Z830 who plays up!.

  I tried to load on the main drivers of function and a few other utilities toshiba to get the lit keyboard, IE helps high and low BRIGHTNESS keys. It did not work.

  Since then, my laptop takes centuries start, I can't use windows update, it crashes and he asks me my password but I can not enter as it crashes again.
  If I use windows troubleshooting tool, which weighs too much. And internet Explorer within the win8.1 does not even the bbc.

  I'm close enough to think that I have to do a full rebuild.

  My challenge is that it is installed with Windows 7 and I have upgraded to windows 8 and 8.1.

  My questions are:
  1. everyone knows what precedes and is there quick ways to solve the above problems.
  2. What is the best way to rebuild my laptop, I have to go back to windows 7 and then upgrade to windows 8 again?

  Ideas gratefully received, I'm ok, reconstruction not eager not to there because it takes forever to backup and restore, and I must be missing something. But I think its necessary.

  As far as I know that the Portege or Satellite Z830 series was not supported to win 8.1 by Toshiba because he did not appear in the Windows 8.1 compatibility matrix.

  This means also to win 8.1 drivers or software for this series isn't available and not downloadable. This could be the reason why you n t get some special features for laptop.

  From my point of view of a few you might try to fix the Win 8.1 preinstalled using the repair feature s own system. If this doesn t help, I'm afraid, you need to restore the system of m.

  Are you what is the best way to rebuild the laptop?
  Well, it depends on the operating system.

  The Portege Z830 was pre-installed with Win 7. In this case the use of the Toshiba recovery disc install Win 7 again.
  If you want to reuse 8.1 Win, you have two choices: either you would update the Win 7 system-> 8-> 8.1 Win Win
  Or you buy the Win 8.1 Microsoft license and install own 8.1 win on this laptop.

  But as I said above: the drivers Win 8.1 and the software isn't available for this model

• Why Sony keep it cancel my transaction to reconstruct my portfolio?

  Why Sony keep it cancel my attempts to reconstruct my portfolio via PayPal?

  Hello cm6246,

  For further assistance about your concern, please contact nearest Sony offices/Sony representative of your place of residence offices in the Asia-Pacific region. Due to the proximity, they are in a better position to respond to your questions or concerns.

  Thank you

  Farley

• If a .fcpbundle can be rebuilt? Question Archive:

  I have archived a FCPX project last year and I don't think that I did it correctly. It seems that I selected the .fcpbundle file and "has shown the contents of the package" and then copied all the content on my external hard drive for storage.

  Now I open these files to back up. Is this possible?

  I have the following inside my folder:

  CurrentVersion.fcpevent (file)

  Original media (folder)

  Make files (folder)

  List of sharing (folder)

  [name of the event/project] (folder) by another 'CurrentVersion.fcpevent' file inside.

  Is it possible to rebuild my .fcpbundle file or open these files somehow?

  Thank you

  No, you must have checked in the library complete .  An interesting question, however.  If you create a new empty library and can copy everything that was in the original library (rendering of files may be omitted) in with the correct directory structure I would expect she would be recognized.

  However, you don't list the file CurrentVersion.flexolibrary, which is the library database - quite important!  If you do not have it I doubt it would work.

  The library should contain this to the next level, then he must make a folder for each event.  Each event record contains the CurrentVersion.fcpevent file, a record of original media and a folder for each project.  Project files contain another database file CurrentVersion.fcpevent.   Because AFAIK FCP X library details are owners of Apple and not published, so I don't think that any reconstruction of lower level is possible.

  Geoff.

• General question about adding storage Readynas 204

  I have Readynas204 on x-raid with three discs of 3 TB sends me some 5.45 TB of storage. Yesterday I added another 3 TB and readynas recognized without any problems but the storage size has not changed. I installed the new drive straight out of the box and I don't think that it should reformat because the drive status is green and the 'Format' button is grayed. The State is green, but that is to say the reconstruction of the volume. My question is I am suppsed to see the storage of 8,38 to size once the volume rebuild process is finished? or I suppsed to see increased storage size rightaway after adding the 4th disc? Thought I should ask this here first before submitting a ticket. Thank you

  You should see the larger size when the rebuild is complete.

• Read the question text

  Hello, I've attached all the images needed and screw/chopsticks.

  Question: I'm checking my text of reading/writing (what is written errors in an XML format, but also a corresponding timestamp) right after that I wrote the error in the XML file.  The code does is to make sure that the error is not a mistake I am allowing, then goes to write the error in the XML.  There is a box structure which then manages a first time entry.  The idea is to review the data from the XML, then insert the new error in the table and then write back in the xml doc after flattening.  I understand the issues in the long term this 'solution '.  Now, please don't comment on it.  What bothers me, is that when I try to re - open and read the document, I can't seem to ever display element of the array, even if the read/write function (which is essentially the exact same thing) can do it very well.  I circled the items.  The code is in 2011.  Be sure to insert text in the name of the document.  Run it a couple of times and I think you'll see what I'm driving at.  Anyone have an explanation for it?

  

  

  Open your base to replace file read and ends with reading XML file and Write functions, and I think it will work in the desired manner.

  You must use XML reading and writing files functions to serialize the data in a way that LabVIEW can reconstruct the table clusters and timestamps.

  http://zone.NI.com/reference/en-XX/help/371361H-01/Glang/read_from_xml_file/

  

• The question of recovery of the Z60m?

  I bought a really nice Z60m outside Ebay, its like new condition and Im very happy with it.  I have a question that I would like an answer, if anyone knows.  Seems like the guy I bought to had her wipe 'Tech' operating system, which is fine, except that the problem is they don't just wipe the XP partition, they took the road easy and wiped * EACH * partition, so I have more no recovery partition.

  What I have is a HARD drive completely clean and my XP COA on the bottom.  Now what I want to do is to create a set of recovery discs off my T42 wife (who also runs XP Pro) and use them to recreate my Z60m new back to the factory.  I guess my question is: can I do this?  Keep in mind I have COA legal s for XP Pro on two laptops, so it is not a question of the legality of the OS, just a matter of fi T42 rescue disks or recovery discs will work on the reconstruction of my Z60m.

  I expect to have to download all the drivers Z60m lenovo site and install them later...

  Any ideas on this or better ideas that I have?

  sfraden, welcome to the forum,

  It can work, set your SATA settings in the bios in compatibility mode and go. Yes, you will need to clean the drivers etc and no doubt use TVSU to get some things working. It will probably work if it isn't - sorry.

• WMC - Winchester, KY (zip 40391) EPG completely wrong. Missing channels - Rovi question?

  Two weeks ago, that my Motorola tuning adapter did not close on a signal for upstream, so I called TWC and determined the problem to be a signal issue, so they sent a new tuning adapter. I installed Wednesday last and same problem, so I arranged to have TWC out home yesterday. Over the weekend the signal sets itself and I got a lock on the tuning adapter...

  I made the mistake to repeat the TV installation in WMC when the tuning adapter was not working (I didn't know what was the problem at the time) and now I'm missing channels I actually watch. If I understand correctly Novi takes the data from the guide at the beginning of July. My HD Homerun first scanning channels shows all channels correctly that I pay for, however because of the horrible guide from Microsoft for WMC 40391 lack channels such as Discovery HD, DRY, Science-HD Network and much much more channels for Winchester, KY (code postal 40391). I tried to Lexington (40509) which is also served by TWC and although a ton more channels is presented, they are completely incompatible with the TWC to Winchester. For example, the network guide food songs actually channel FX. There are some multiple choice questions for Winchester - analog, digital, digital reconstruction & digital, analog of Richmond Richmond. I tried them all and each of them lack the main channels (for me). How can I get Microsoft to fix their chain and guide information for Winchester, KY 40391? I had changed my HOSTS file to point to localhost, so that I can go through the installation of the TV and make check TWC sends them and they are adjustable, but without a guide WMC is useless as a DVR in all layers of WMC without a guide. I finished repeat Setup with the 'Winchester digital reconstruction', but missing my favorite channels. Help!

  Yes, I went on these documents already. Your name for 'Winchester digital' and 'Digital Winchester rebuild' are completely false for zip code 40391. Fortunately, you have included "Digital Richmond" as an option for the same code zip and 97% of these channel numbers match the correct call signs\programming\guide for channels on my part of Winchester. I guess it's possible that Time Warner Cable provides configurations different channel for different parts of Winchester; Although we are a small town.

  In any case, my problem is now solved by using "Digital Richmond" under zip code 40391. It wasn't easy for me to choose this one in TV in WMC signal configuration, because I do not live in Richmond, KY., but now that I know of to use if I rebuild my system, I shouldn't lose so much time to try all the solutions, I had looked at this time.

• ISE rebuild - Cert Question

  Had to rebuild our ISE primary and secondary (HA) devices because of the hardware failure. Currently, I have improved the capacity of the disk with disks mirrored with HSP. In the reconstruction, I was unable to use my backup.

  So my question is: if I have to generate a new certificate request (CSR) signature to get my CERT to bind correctly?

  Thank you

  Dave

  Hello

  When you rebuild the ISE server, it will bring self cert signed thereon.

  You can also join servers with self signed certs.

  Make sure you self-signed the other needs to be there in the store of trust of ISE.

  Config backup contain also system certificates.

  Concerning

  Gagan

  PS: rate if this can help!

• Nexus 7000 questions sampled NetFlow

  We have Nexus 7000 s set to sampled netflow. We have tools which have reconstitute recording of flows sampled for the management screens. Most of the tools require the template folder of feeds, optionally and to send in order to reconstruct the sampled flow record. We've captured some of this traffic and noticed that the template contains "SamplerMode": unknown (1) [see Nexus 1 - 1.png]. Is this normal or have we do not include the commands needed for the operation?

  Thank you

  Terrence

  fearure netflow

  Active Stream timeout 60

  flow timer 15 inactive (default)

  workflow session

  threshold flow timeout agreesive 80

  workflow exporter flow_exporter

  x.x.x.x use-vrf destinations management

  9996 udp transport

  version 9

  the 30 model data timeout

  exporter-stats 30 timeout option

  option table sampler timeout 60

  flow flow_record record

  match source ipv4 address

  ! {many instructions}

  netflow_sampler-2 sampler

  out of 1 100 mode

  Flow monitor flow_monitor

  record flow_record

  exporter flow_exporter

  interface VLAN 150

  IP flow monitor output flow_monitor netflow_sampler-2 sampler

  Hello Terrence,

  You are right about "most of the tools require registration of flow, the option and the model" and they also require the definitions of all elements used for export.

  We maintain constant communication with Cisco for their last item ID and definitions (e.g., description, type, length, etc.).  It looks like your collector may need definitions.  Once updated, the front-end server must then be updated to make use of the new element if you want to use.

  If you send a capture of packets of the flow to Plixer will give you a more complete diagnosis. Make sure you include the models.

  You can vote if my post answered your question.