Question of the PAP status query
I have a message APP and you want to query the status using
Thanks, I've thought about it. Here's how it should look like instead of my original code I posted. Tags: BlackBerry Developers HP Officejet 6500 Paper Out status on the computer but the paper loaded and test page prints We have a HP 6500 CB815A, which works well for almost a year. As of today, we get "Paper Out" status on the computer, but there is paper loaded in the tray... the same high quality paper as we always use. The test printer utility reports the same status. However, the printer can print a test page and fax without printing problem status. I unplugged for 30 seconds to reset, but we get the same status. Someone has had this same problem and solved? Thank you Dave If you have not tried to reboot your PC, I would. If this does not clear the issue, I would follow the following steps: If these steps do not work, please post and I can continue further with troubleshooting. Good luck Brent The paper on the set of source has been disconnected. How to reconnect to the status bar? Model HP OfficeJet J6480 The paper side left, on paper source tray, broke up the status bar when I moved it to the right to accommodate a stack of small greeting cards. How the guide is reconnected to the status bar? Thank you... I thought about it I just before your answer! Best practical Question - update the query (see object) based on the drop-down list selection I have a question about the most efficient way to perform the following task: I create a page that contains several DVT components to display data based on specific requests. Top of page I am hoping to have a drop down menu (selectOneChoice) that contains dates different and based on what the user selects (i.e. 2010, 2011, 2012, 2013, etc.), this will update the query in the view object of some (i.s. WHERE Date = '2011', or WHERE Date = 2013"), and then you view the appropriate data in the DVT. What is the best way to do this - from a point of view bean managed / page, as well as the View object? Advice/documentation would be appreciated. Thank you! When you drag the vo executeWithParams one another that will create links for operations such as 'executeWithParams2', 'executeWithParams3 '. On the method that you use to update a view by calling the executeWithParams operation, you call the other operations too. Timo Question about the construction of cube / query performance (11.2.0.3) Aggregation based on costs (aka "Pre-computes percent") was introduced in 11.1 as a simpler alternative based on the level of aggregation. Product management dream was a linear parameter, but the complexity is quickly apparent. Which could measure the linearity against? The generation time? Time of the query? Total size of the disk? The result the balances of all of these factors, but is linear against any of them. Fortunately, behavior level percentage precompute was fairly consistent between cubes and patterns in our experience, so I can give you a rough characterization. But keep in mind that this is a guide only - you have to experience on your own scheme and a system to see what works for you. In particular, you must balance your own requirements on construction time, time of the request and the disk size. * 0% *-this means no precomputation at all, so all data access will be dynamic. This is the recommended setting for the top of the page partition of a cube. If, for any reason, you want to use for the scores of leaves as well, then I advise you pass a cube uncompressed. * 1% *-he pre-computes the smallest part of the cube that is allowed by the algorithm and would take certainly greater than 1% of the time taken by an accumulation of 100%. For partitions of leaves, it is usually best to increase the amount because you'll get much better query response time for not much more profitable in terms of disc size and the generation time. It may be a good level for the top of the page partition of a cube, but should be used with caution because the top of the page scores are often too big to pre-computes. * 2%-19% *-these levels does not seem to be a lot of benefits since the amount of time and the total size of the disk is almost identical to a construction of 20%, but queries are slower. * 20%-50% *-this range is probably the best compromise in terms of construction compared to the time of the query. The default value of the AWM is 35%, which is a good starting point. Lower it to 20% if you want a faster version and get up to 50% if you want to replace the faster queries. The setting is close to linear in this interval than outside it. * 51%-99% *-you should probably avoid these levels, although I've seen 60% used in practice. The reason is that while the size of the cube and the length of the construction increase rapidly, the queries do not receive proportionally faster. Indeed, you may find that queries are slower because the code spends more time swapping in the pages of the disc. * 100% *-this will be pre-computes all (non-NULL) cells in the cube. It may be a surprise after my advice about 51%-99%, but 100% is a reasonable level to choose. This is because the code is much simpler when you know that everything is precalculated and then stored in the disk pages. Duplicate movies & the iCloud status question I have a strange problem. I use the latest version of iTunes on my Mac. The last time I was there (maybe two weeks ago), everything was fine. Today, I opened iTunes to download two movies that I bought it. Here were the things are a little strange. In my list of recent movies, I noticed that some of the films have duplicates. There is at least 6 of them. It is one I downloaded previously and another with the little cloud on it. I then clicked on the full list of movies and looked at the list. All those that are duplicated have an inscription that says bought and one that says non-eligible (in the iCloud status field). Those who say ineligible is those that I had downloaded previously. I tried to play a few of them, and they play very well. I'm confused as to what happened here. As I said, everything was fine and normal the last time I was here. I have not opened iTunes or even done much of anything on the computer right now. All my music is fine without duplicates. Any ideas what happened or how I can fix this problem? I thought to download duplicates that have the little cloud and then removing those who say ineligible, but I don't want to end up spoiling something and lose these movies all together. I want to just delete the duplicates. Lisa Hello, nhlisa! Thank you for joining the communities Support from Apple! Looks like you have a problem, namely what movie double to remove from your library. I know how it is important to be sure, there is a good copy of a movie in iTunes to look everywhere. Read this article here on how to find and remove duplicates in your iTunes library. What might have happened, is that the iTunes Store pushed new versions of films for you. The best option would be to remove the non-qualifying version and download the iCloud version in order to have the best version available on iTunes and for your viewing. See you soon! The printer message ' load paper in the printer "appears when the paper is still in the status bar. I rebooted the paper in the tray several times, and the message still appears. I have tried rebooting printer several times and the message to load paper continue to appear. jmtbat Please read this post then provide some details. What printer model? Question about the menu item displays do not correctly the status of 'active '. Hello I've reproduced for purposes of training "Influence," tutorial site and my questions are the following: As you can see on the site (1) the order of top menu contact us, has the same features as the other components (speakers, time and place) - see picture attached. However, when the user clicks about us contact. the menu item is not barred to the outside like any other. I checked the condition of the assets is correct. The anchor link is placed on the foot of page, designed on the page A-master separately from the Home Page. I tried to place the anchor to the Home Page at the last point before the beginning of footer, but no result. (2) also if you do a simple test, you will see that by clicking on the heading "Contact us", the menu Time & Place is highlighted and if you click on the 'Top' menu, or if you are in "Time and place" content and you click on 'Top', the 'Speakers' menu is also highlighted. Please note that this behavior is also indicated to the site of origin INFLUENCE ... What I am doing wrong? BR Nektarios Replied here: https://forums.adobe.com/thread/2063776 need to adjust the paper after each print I have that 7520 printer all in one for 2 months (new) After each impression I have to adjust the paper otherwise, I get the message: no paper Make sure your paper guides are tight against the edges of the paper, while paper is loaded in the tray. There should be little nicks in the status bar to help you confirm that the guides are engaged in the correct position. Otherwise if you are referring to the feeder manual adjustment can be the best thing you can do. AutoDocFeeders are normally not snap and often need to be messed with on many models of printer. Sometimes a small building of habbit can solve a problem like this. If this isn't the case, you can try to contact HP support since it is such a new printer. However, unless you can prove there is a mechanical fault on the tray or feeder, it probably isn't something they can do. You don't have something with the message No paper well. Same as if the guides are disabled the printer should recognize there's paper in a way or another. Questions guide paper normally takes place at the inadequacy of the size rather than no paper error. CP 4525 always want to get the paper from a TRAY Hello We have a problem with our printer HP CP 4525 DN- -The tray in the printing options is "Auto" and "A4" paper size -On printing, the printer always stop and ask us to feed paper manually in a status bar! -We already have 'A4' tray for two! -Any paper size or type we set a plate on the config panel/web printer. -We put drivers in option to use the tray two but some programs it self on 'Auto '. -The client PC (Win7/64-bit) is printservers and served by the network -We have also updated to the latest driver (61.091.12.102) -I me remember an old printer HP - there you might assign to Lac 'by default'... Very annoying sound to remember to manually change the tray! Hi Visard, There are a few places that may be associated with the printer asking that you manually load media into Tray 1. I would like to talk and ask to check these settings. If they are all correct, then we can dig deep. (1) size support check that the printer thinks is loaded in tray 2: Press the 'Menu', then use the arrows to select 'Manipulation of the paper' then 'Size 2 tray'. Since you have loaded A4, it should show "A4". If it shows something else "A4", open the tray and adjust the length and width guides so that they are set to "A4", close the tray and check the menu again. Please refer to: http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01860406/c01860406.PDF Chapter 6, Pages 92-100 discuss media loading. If it is set to Custom or another format of paper and no other tray does not match the job, the printer you guest the media be loaded in Tray 1. (2) check the manual power setting Press the 'Menu', then use the arrows to select "Configure Device", then "print" and then "manual loading. Make sure it is set to 'Off '. Please refer to: http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01860406/c01860406.PDF Chapter 2, Page 20 describes the manual power setting. It is this menu item that causes all work for manual power entry. If it is set to "Off", you can try putting on 'On', then pack in 'Off' even once. (3) check the default value of the pilot printing Right click on the printer in "Devices and printers", then left click on 'printer properties '. On the left, click on the tab "Advanced" and then left-click "to print by default... ». On the "Printing shortcuts" tab, click on the shortcut or shortcuts that you use and make sure that 'Paper Source' is not set to "proceed manually in Tray 1". In the tab "Paper/quality" to ensure that the Source of the paper is not set to "proceed manually in Tray 1". The Firefox status bar disappeared, disappeared. What can I do to get it back? The Firefox status bar disappeared, disappeared. What can I do to get it back? Menu bar (File, Edit, View, history, Favorites, tools, help) Press Alt V T M (CTRL + V T M on Mac) on your keyboard. This should restore the menu bar (Firefox 3.6) Other toolbars View | Toolbars | Select the desired toolbar Other measures to try Try to restore the default value set by going to display. Toolbars | Customize | Restore the default set. This will put the toolbars in the default slot Safe mode You may need to reset toolbars and controls through Firefox in Safe Mode troubleshooting questions I hope this helps! ON theHP is 8630 printer a quick way to print from the paper locked tray (using a Mac)? I normally print from tray 2 and special letterhead in a status bar. It would be nice to choose letterhead in Tray 1 at time of printing without having to reset the printer manually. Is there a way? Jim1949 Hi @James1949, HP Deskjet 1510: Empty tray and the paper jam When I try to print, I get message empty paper tray. I take the paper tray and put again, and then I get the paper jam when I try to print again. My printer worked fine od days. This happened for no apparent reason. Hello and welcome to the community of HP @R-Tuck, I understand that you still receive error messages paper jam on your HP Deskjet 1510. I'll be happy to help you. Here is a link to a document offering solutions to troubleshooting to jam on the HP Deskjet 1510 questions. Try the steps and let me know the results. If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution. I hope this helps and have a nice day. HP Officejet Pro 8630: 8630 HP cannot read the paper size / select correct tray Installed this new printer after you bought specifically for the two plates that I regularly print on letter & legal size paper. I am disappointed to see that while I have 'legal' or 'letter', defined as the paper type when I sent something to print from word, the printer just draws in the default tray. I have no option on my mac to select which paper tray to use when I send something to print. It seems that the only way I can make the selection of the status bar is to go to the printer and change the default setting of the bins. It is not at all what I thought I was is & am for the first time, disappointed with a product hp =) Hi @Kerioke, Agilent 34401 react is not the * IDN? query I connected an Agilent 34401 via a GPIB cable. I saw the instrument in MAX. Her having a GPIB 9 address. But the device does not respond to the * IDN? query. What could be the reason? Implementation of command language? Page 165 of the instruments user manual. If you don't have it on paper, you can download it at http://cp.literature.agilent.com/litweb/pdf/34401-90004.pdf Only 3 GB of RAM recognized on my Satellite A100-192 I have install both modules Kingston KTT533D2 (2G). BIOS detects only 3 GB. What should do? the left hinge broken for my HP Pavilion dm4-2165dx The plastic piece that is what I call the hinge broke. I ordered a new and it comes, but I have questions with turn it on and do not want to damage my computer. Is there a visual guide somewhere who can help me to put that part back on? I understand How to set the size of my screen? Original title: maintenance How to set the size of the screen Norm 21 Is it possible to buy a Duplexer for JO 7500 e910a? I didn't know that this model had a Duplexer for double-sided printing. Is there a duplexer that I can purchase as an add-on? ScriptAction path to a local script on the FMS? I created a registry with the path to the script that I was counting on the use of a scriptagtion, but looked at the logs, I noticed that the script is not found. The execution of the script/path/to/script failed: com.quest.nitro.service.sl.interface
....
HttpURLConnection MDS_CONN = (HttpURLConnection) MDS_HOST_URL.openConnection();
MDS_CONN.setRequestProperty("Content-Type", "multipart/related; type=\"application/xml\"; boundary=" + boundary);
MDS_CONN.setRequestProperty("X-Wap-Application-Id", "/");
MDS_CONN.setRequestProperty("X-Rim-Push-Dest-Port", DEVICE_PORT);
MDS_CONN.setRequestMethod("POST");
MDS_CONN.setAllowUserInteraction(false);
MDS_CONN.setDoInput(true);
MDS_CONN.setDoOutput(true);
String Message = "";
Message += "Content-Type: application/xml\r\n\r\n";
Message += "\r\n";
Message += "http://www.wapforum.org/DTD/pap_2.0.dtd\">\r\n";
Message += "
HttpURLConnection MDS_CONN = (HttpURLConnection) MDS_HOST_URL.openConnection();
MDS_CONN.setRequestProperty("Content-Type", "application/xml");
MDS_CONN.setRequestMethod("POST");
MDS_CONN.setAllowUserInteraction(false);
MDS_CONN.setDoInput(true);
MDS_CONN.setDoOutput(true);
String Message = "";
Message += "\r\n";
Message += "http://www.wapforum.org/DTD/pap_2.0.dtd\"\r\n []>\r\n";
Message += "
Similar Questions
Sorry, this on a virtual computer on your laptop, so test different configs build takes forever (I still have a load of cube really complete). Guess I should not be trying a cube Sun 15 on a virtual computer on your laptop, but trying to sell a DBA on the fact that she could improve the performance of our mini - DW.
Thank you
Scott 
Make sure that completely close Firefox first. When you get to the Safe Mode window, select controls and then make changes and restart and reset toolbars.Maybe you are looking for