Question of unit of MEASUREMENT of density

Similar Questions

• Small Question: Setting of the different units of measure?

  Hi guys

  I'm no expert with Id and I was invited to present a design for print, using Id to create a print ready PDF. The dimensions given for me are 10 feet by 3 feet, with a 3mm of eave. OK, I set as 120inches by 36inches measures. But how then to set the purge in millimeters?

  Any help would be appreciated.

  Kind regards

  Graham

  You type in

  Units of measure can be changed by right-clicking the sovereigns, in the preferences or with a hotkey combo (which I keep forgetting who it is). However, almost all areas where you can type a unit value, you can also type in a different unit of measure. So in your case you just type in "3 mm" to the purge.

  (... "Pi" really added to the list of units?)

• How to change the unit of measure by time of Bing

  By the time Bing, how do you change the unit of measure for Fahrenheit to Celsius.

  By the time Bing, how do you change the unit of measure for Fahrenheit to Celsius.

  Hello

  Right-click anywhere in the weather app and select change to Celsius in the background options bar.

  Concerning

• How the date of end of the units of measure?

  Hello

  What is the navigation at the end "unit of measures".

  We have noticed that there are a lot of undesirable UOM exist in our system.

  We do a cleaning.

  What is the navigation and the process to end the unwanted UOM date.

  Thank you very much

  Sandra

  Hello Sandra,.

  You can inactivate the unit of MEASURE. Please follow the Navigation, more

  The superuser inventory > Setup > unit of measure > unit of measure

  Put the inactive date in the column ' Inactive on "he will finish / inactivate the unit of MEASURE.

  Thank you

  GHG.

  NOTE:

  Please mark the post as helpful or answered if the update has really helped you. This would also bring the wire to the logical conclusion and will be useful for viewers.

• Cannot change the unit of measure in pixels in Photoshop CC image size dialog box. can anyone help?

  Cannot change the unit of measure in pixels in Photoshop CC image size dialog box. In the Photoshop preferences, the unit of measure in pixels and in the dialog box canvas size pixels already is the unit of measure. Can anyone help?

  

  Resample uncheck lock the pixel dimensions, so it cannot be changed.

• Unit of measure illustrator CC 2015

  Hello

  I have a big problem with the new version of illustrator downloaded yesterday.

  The unit of measure is no one millimetre longer but to 1000 millimeters. And when I change the value of my item on the page. Does anyone have a solution for this problem?

  Hello

  We have released an WINDOWS ONLY fix today that solves this problem of corrupted preferences. Go to the creative cloud application and download the patch CC 20151.1 (19.1.1)

  If you see not the patch in the creative Cloud application wait on or refresh cycle you can disconnect and connect to force refresh the list of available patches.

  Kind regards

  Ashutosh

  On behalf of the Illustrator engineering team

• Using InDesign CC 2015, how can I change the units of measure in the dialog box new document? I want inches and metrics.

  How can I change the units of measure in the area of implementation of the new Document? I want inches and metrics.

  Preferences / units and increments.

  If you set this with no documents open, it will be the default for all new documents (new, not existing).

  The next time you create a new document, you can also see this change in the new document set up.

• In Adobe Acrobat XI pro how can I change the units of measure in inches in centimeters?

  In Adobe Acrobat XI pro how can I change the unit of measurement to inches in centimeters?

  Edit > Preferences > units

• GSM - required role to change the unit of MEASURE Conversions

  Hello
  Is there a system role that is used to change the UOM conversion in GSM? Some of our users are able to edit these, and some are not. After reviewing the system roles, the only role associated directly to the unit of MEASURE is the AVAILABLE_UOM_ADMIN, which is a different section on specifications.
  
  Thank you
  Drew

  Spec Editor role is sufficient. You should also have a category UOM and Base Unit of MEASURE selected.

  M

• Why won't my units of measure

  I have an old file created in CS5 and opens in CS6 is comes up with cm even if I changed the units of measure with the open file and also no file open. Yet, whenever I open the file it still is in cm. Any ideas?

  Emma,

  Then it is most likely a corruption of file.

  What happens if you creater then file a new document with the desired unit > Place that annoying?

  Otherwise, you can try to select the entire document through all layers and paste it into a new document.

  Don't forget to have layers remembers dough checked in the layers flyout/dropdown and uncheck it again.

• Units of measure for network made and received

  Hello

  Looking at some data in the data base of CB, the units of measure for the resource type 6 (network) received and transmitted is labeled as "GB / h.  Some of the sample values by looking at daily performance stats I see values such as 112 629 and 111 134 to the following sample.  So should I interpret this value so that they would have sent / / received 112 629 gigabytes for this time if the use has been constant during this time?  It's really high for what was actually happening.  Is it not really Kb / hour?

  Bill

  Hello

  Internally, vCenter chargeback divides the values of the sample by the conversion factor to get to real values. For the resource type 6 (network received and transmitted) the values of samples in the CB_VC_PERFORMANCE_STAT table are saved in Kbps and when calculating costs are converted to GB / hour by dividing the value of the sample by 291.271 ((1024*1024) /(60*60) = 291.271). In your case, the real GB by time values would be of the GB/hour (112 629 / 291.271) and (111 134 / 291.271) GB/hour.
  You can find the conversion factors in another table CB_RESOURCE_VC_COUNTER_DETAIL.
  -Amrainder

• Units of measure for the Framework Document

  Dear Forum gods,

  I am using a VB script to define what I believe to be the units of measure - in other words, the units displayed on the horizontal and vertical rules when opening a document. According to the script:

  myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.inches

  myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.inches

  This does not seem to do anything.

  Error reports 30480 - which I can't find any information on the newspaper.

  Your help is appreciated!

  You look at the VB reference? your line looks strangely like a line of JavaScript and JavaScript is etque the same syntax as VB.

  A quick Google turned up the VB CS5 reference; your example of a measure is on p. 28, but with different wording.

• Can I change the units of measure?

  I have the English version of the designer of the LC (v. 8.2). Can I change the units of measure to cm?

  Yes... under the window menu make sure the drawing AIDS palette is active. Then on this palette, there is a setting to change the units of the ruler and grid. See the image below.

  

  Paul

• Unit of MEASURE in hourly rate

  We set the schedule of rate of work using 'Days' as a unit of MEASUREMENT, default Oracle displays "Hours" as unit of MEASURE, can anyone suggest what is the installer to do to fix this problem? We use the EBS R12, version 12.1.1

  Hello

  There are no other installer. Oracle supports only the hours as the unit of MEASUREMENT of working time.

  You'll need to work around this limitation.

  Dina

• A few questions on Generate and measure PWM

  I'm working on a project that requires both measures and generate PWM signals.

  Currently, I have some problems with these two.

  I use card PXI NI 6624.

  1 issue with PWM measurement.

  I connect the signal to the door + and GND for door. I hope that I can read that the width of the high pulse, casue the door will start the meter.

  I use the code as in the example of a measure of the market (on the photo 1) factor. The problem I have is the values in the table also include low pulse, and these two values will be shifted in the table. So if I have the array index I can't get a stable number (in photo 2).

  I want to know the reason and how to fix it.

  2 problem with generating PWM.

  I use another counter to generate the PWM.

  I connect Vdd and Vss with a DC Power Supply 13.8V. I use a 10 KOhm resistance connect between Vss and output. I got a good signal with 13.8 V.

  a > my first problem is the frequency is not stable. I put it at 122 Hz, and I saw him skip Hz 119 to 125 Hz.

  b > my second problem is when I connect it to the PWM measurement, I did above the will of voltage up to 2.5 V. I tried with 1 KOhm resistance and it downs to 6V. When I connect a real controller with a 12V PWM, this signal is stable after I connect with channels PWM measurement above.

  I would like to know if I did all this trouble. Cause be will use this PWM to simulate a value of the probe and it must be stable.

  I enjoy reading and answering my questions.

  Best regards

  Thang Nguyen

  Hey Thang.

  Try temporal evolution and also remove the expectation of punishment in loop and add samples to read terminal. Attached, it's the comic book for this try this, it should help you.

  Lab