Question of video effects

Similar Questions

• Video effect in Premiere Pro CS6 timecode problem?

  If poster is similar to the description for the question people have been seen in 5.5.  Here are the details...

  • New installation, make the leap from FCP, first opened PPCS6 facility.

  • Source footage introduced as DVCPRO HD 720 p at 60 frames per second. any in the new sandbox, then to the timeline in sequence 1... works perfectly.

  • New transparent clip on track over the images, extended length full production.  Apply video effects > timecode to the transparent clip.

  • I see the reticle and dark translucent box positioning and indicator field... but no turnover number, even after having made.

  Just need to make a TC of the film burn and I spent half a day trying to get the burn to work.

  Any ideas?

  Peter,

  Don't thanks for your reply, however, no results, same problem.  However, I think I can found root cause is... this issue be a designer, I have too much (managed through the information manager) installed fonts with a conflict here and there, and I had to use "helvetica" of my client and other policies from time to time.  I have activated an account on my computer (nice and clean fonts & settings) have pulled up the same document in first and BOOM rolling timecode is displayed.  So with this solution in hand, my thought is somewhere I have damaged/lost the police in my basic account that uses the first to generate timecode.  I wish there was a setting I could change into effect video timecode to choose what the police is used... maybe you might spend on product development?  Or you know precisely what the police, he uses the video effect TC?

  In any case, thanks for your answer... now I'm off to go see if I can solve the problem of fonts in my basic user account.

  Clint

• Question about video drivers Satellite P100-257

  Hello.
  Question about video driver. Version 14.25... Works (tells... 945 GM chipset); 14.27--works but with ocassional problems (tells... 945GM/GU); version 14,29... (said 945GM/GU) - does not work at all - black screen, but you can hear sounds which tells that XP does all right.

  Why that? And what is GU? Pilot info says it is for 945GM, pilot says he's for 945GM/GU.

  All kinds of three said they are for Mobile Intel 945 GM Express chipset. Who initially my machine have said there. In section "video card" my machine said no Intel - some Calg... - don't remember exactly the name.
  Thank you very much.

  Hello

  As much as I know Satellite P100-257 supports the graphics card Mobile Intel 945GM. The code name of Intel's GM Calistoga
  This is not the same thing as the chipset Intel 945GM/GU. Both are different and so the graphics drivers are not totally compatible!

  The Intel page provides some interesting info on these chipsets:
  Mobile Intel Express Chipset 945GM

  Unfortunately, I have not found anything on the 945GM/GU.

• Cannot add video effects, preview error mask

  HY

  I have a strange problem, when I add a video to my preview sequence is normal, but as soon as I want to make a mask Image Preview goals down in the right corner and I see only a quarter of my image! so there is no chance of making a mask... This only happens by video effects, if I make an opacity mask, the preview image stays where it belongs. Someone knows this problem? Looks like a mistake... Im working on a mac with the mavericks and 8 GB of ram. IM new Pro Prime Minister, used to work with fcpx.

  

  Hello

  I tried on my machine and everything works fine. Try to switch the GPU acceleration to the software under file > project settings > General. Remove the existing previews and check if the problem persists.

  Thank you

  Regalo

• Name of the video effect

  Who knows the name of this video effect? http://VK.com/doc2000048953_406657833?hash=45a53903463300764c & DL = 0431eb2739c91b6a0f

  Several effects but essentially a set of Modes of fusion and overlays and quick cuts.

• I have Premiere pro for cs6 and I am looking for a video effect that has like a blurred background rectangle and inside the rectangle is just normal video a little smaller that I posted a link to what I'm talking her within the first ten seconds of this

  https://www.Google.com/URL?SA=t & source = web & rct = j & ei = Can0VKmmOoSVNpyGhNAN & url = http://m.yout ube.com/watch%3Fv%3D3g_K8RyGUeI & ved = 0CB8QtwIwAQ & usg = AFQjCNFI0ivwTaEa02S1jVj6_z2DEt9t9w I just need the name of this video effect

  Put your video clip on the video track 1. Put the SAME element above himself on the video 2 track. Select 2 video clip and go to the EFFECT controls panel and open MOTION. Scale to 50% or what sounds good to you. This creates the PIP or ' Picture in Picture '. Then select (click on) the V1 video and go to the EFFECTS tab and find the (type in the search window) Gaussian blur effect. Apply to the V1. Set "Fuzzy" to taste. The only thing missing at this point is the outline in white for the PIP. I don't think that there is an 'effect' to do this, I could be wrong. But you should be able to use the shape tools in the Titler to pretend quite easily. For example, just do a solid white box slightly larger than the picture. Move the clip V2 to V3 and put the title on V2, sandwiched between two video clips. As the box is larger that the video scaling, white edges would show behind clip PIP.

  Hope this helps you

  Jeff Pulera

  Safe Harbor computers

• Video effects for a horror/thriller trailer

  I work to restore a trailer as a different kind, and I was wondering how to do some effects.  How do you the white flash on the screen (not a dip to white transition but in the middle of the clip) and flash that shows a negative of the original image as you see in some horror/thriller trailers?

  Hi owiseone,

  Here's how I would build the effect.

  1. Create a "negative image".
     1. Apply the opposite effect: Video Effects > channel > reverse
     2. Try different channel Options. I chose "lightness".
  2. Desaturate the colours on the negative image.
     1. Apply a fast color corrector
     2. Take the Saturation to 0.
     3. Adjust the slider to input to taste levels
  3. Manually make the effect flash on and off with the original clip using the strobe effect, or adding the effect to add edits.
     1. First, follow these steps
        1. Copy-paste the attached to V2.
        2. Remove the effects of the clip on V1.
     2. Do one of the following for the clip on the V2:
        1. Apply the strobe effect: Video Effects > esthetics > strobe light and adjust the settings to your liking.
        2. With the Razor tool or the keyboard shortcut add modify, create some splices that are several frames long, create them to be the same length, at random times. Remove portions of the clamp between the changes to add it.
  4. Reproduce the effect and adjust the settings until you are satisfied with the effect.
     1. Set up a range to play out
     2. Enable looping
     3. Adjust the settings in one of the effects as they play in to out.

  Hope that helps!

  Kevin

• Can I apply video effects to an entire video track?

  Is it possible to apply video effects to all of the channel, so when I drag a clip to video 1, the effect is applied automatically? I know that I can make nests or select groups, clips, but I will introduce constantly new clips in my workflow, so the automatic application of the video effects would be very useful.

  Yes.

  You can apply effects to a layer of setting of the railway. Simple. Just the adjustment layer to the end of the timeline to expand whenever you add more clips on the track.

• Correction of luminance, HLS and accentuation of the video effects slow rendering

  Hey guys - I'm troubleshooting some very slow rendering to a 10s file MOV H264 and it takes a long time to make.  When I don't have any video effects, it takes only 15 seconds to render.  With all the effects, it takes 300 s return.  My system is an i7 - 2600K, 16 GB of RAM with GeForce GTX 560 2 GB VRAM card. By disabling effects video one at a time, I narrowed down it to the luminance, HLS and unsharp mask representing a large percentage of the churn.  Anyone else notice this and any ideas on improving it?

  Thank you very much.

  Thank you for downloading dropbox.

  I have a system simular to yours. I put the sequence to 60 p.

  When I turn off the GPU effects not she makes it quickly.

  With the GPU not effects its slow.

  So I blame it on the effects not GPU cpu at the same time.

• You can automate video effects?

  Is this possible in first, in any version, to automate a video effect?  For example, you can start 'camera blur' effect 100% (very vague) and have it SOUPLESE to 0% (not blurred) in 10 seconds?

  There is a very good tutorial on it here: http://vimeo.com/48360506

  It takes you through the fixed effects and explains the help system and then shows you how the effects of keyframes. Maybe it's the best tutorial for you among all the different tutorials available.

  If you like the tutorial, please mark my answer as being correct. We will other people know that you are satisfied with the answer has already been given and they spend a lot of time trying to explain what you know already now.

• Video effects work only not on sequences embedded in first Pro CS5

  HI -.

  I am having trouble with the first ProCS5. I have a project with a few clips I put together in a sequence. I put this sequence in another sequence. Here, I'll add one or two tracks of additional images and apply the color correction.

  The problem is: no effects video I drag the sequence (which is now a nested sequence) has no effect. What I change in the effect control will sho not upward in the monitor. Audio effects do not work, though. In addition, none of the tracks above the nested clip are displayed. To clarify: the nested track is on V1, another clip is on V2 and V3 is a picture. Only V1 is displayed.

  I know that it is supposed to work, and it doesn't in another project created in the same version on the same machine with the same kind of material. But no matter how many times I create a new project, just the application of video effects to a nested sequence does not work.

  Even more strange is the fact that my applied effects appear in the "export settings" window. They do not, however, in the final rendered file. I'd say it's a bug.

  What could be the reason for this behavior?

  You use acclerated CUDA/GPU rendering? If so, what happens when you change the rendering mode to your software only project?

• Just installed cs5.5, audio & video effects are missing...

  Just installed cs5.5, audio & video effects are missing... What to do?

  Thank you all

  Need not do anything. One of the major improvements in CS5.5, although perhaps not as well known to the public, is that the audio effects are now 'intelligent' and are unified in their mono, stereo and 5.1 counterparts. Which means that if you need, say, Reverb for a stereo clip, you just drop the effect of reverberation on it without having to find the stereo > reverb effect. They have the same effects, just much easier to apply. Check out blog post of Todd here: unified audio effects in Adobe Premiere Pro CS5.5 "Premiere Pro workspace .

  This said, you have problems with video effects?

• BEFORE 9: Title overlay with a 'wave of string' multiline video effect

  I've tried for the following effect: superposition of a picture of a garden that's transmutation from a photo of the aircraft to a cartoon image (I succeeded with that part of the effect) with a title. On a separate part of the time line I created a title that will be a photo overlay and starts at 0 opacity goes to 100% as the "wave channel" video effect (I succeeded with that part of the effect) & then straightens as normal text - this is the part I'm not properly.

  When I tell me how make what precedes, I still move this sectional piece to overlay the picture of the garden, which could be problematic

  I'll gladly change this method if there is more easy to achieve the title, which is a superposition of several lines to a picture with a "wave of chain" video effect which straightens the text.

  If someone has done something similar?

  Although it seems that you create your title on a separate timeline effect? Not sure why you do. It makes much more sense just put on a video track above your background.

  If the title is in a different project, then must consider exporting/sharing with transparency. A pre title will be transparency, but we need to taken into account, in the export action, for use in other projects. It is where Millions of colors + comes with to many formats/CODECS. The + is the Alpha channel and it will take to transparency.

  Good luck

  Hunt

• Adding video effects plus two plays bad clip

  I have a created a music video sequence consisting of a clip, cut into about 50 small clips using the Razor tool.

  Now, if I add video effects more than two to one clips, Adobe CS5 first no longer displays not the original clip, but instead shows an other clips in the sequence!

  It seems that the chronology mix when you apply several effects.

  Is this a known issue?

  I noticed that this effect does not occur with all clips or all effects... The effects I've been unsuccessful in adding to some of the clips are, for example: time of Posterization and Echo.

  I can reproduce the problem. I have not tested all the effects, but in my limited testing I could reproduce with anti-aliasing, blurry photo, sound effects and Ghost images following one of the effects of the weather.

  I'll file a bug for it. You don't need to.

• First Pro CS5 video effect help

  I want to be able to play my video in reverse, but I can't find the video effect do with. I don't want to just play the upside for me to see. I want to have the effect so when I export it will be in the video.

  Thanks for your time.

  Back inside the Clip speed/duration, where you will see a box reverse.

  When it is applied, if you want to use this Clip, just export the Clip.

  Good luck

  Hunt