Video effects work only not on sequences embedded in first Pro CS5

Similar Questions

• Work on keyframes in copied sequence change the original sequence as well (first Pro CS5.5)

  Hello world

  Maybe it's a very basic question, but looking on the forum did not bring to the top of the related issues, so I'm going:

  Let's say I have copy a sequence in first Pro CS5.5 and paste it into the same project. I have a few textclips with keyframes in them. (I do, because the videos remain the same, I just write different things in them.) When I change the keyframes in the copied sequence, the way that I need them out there and then come back to the original clip, keyframes it changed as well. This isn't what I wanted.

  So my question is: How can I make a copy of a sequence and then work on it without changing the original at the same time? Why are they related in any way? What's a selection in my version of Premiere Pro or is it a general thing?

  Be great if someone could explain it to me.

  Thank you!

  When you open your title for editing, press the new title based on the current title in the title Editor button; It's one that looks like the film with the "T" in it. This will create a new title in the sandbox, but will not replace the current instance of the title. However, you can simply drag this copied to the instance title, hold the Opt/Alt key and drop it onto the animation instance, copied. This will replace the contents of the clip, but preserve the animation.

• "Messenger Service, or the Net send command not working only not on the service remote computerhe.

  Messenger Service, or the Net send command not working only not on the remote computer, despite the messenger service is started "it works only if I restart the service.
  operating system is windows xp
  service pack 3

  Hi Charbel,

  Have you done a recent software or hardware changes to the system?

  This problem occurs because the Messenger service is disabled. The Messenger service must run on the destination computer to activate the NET SEND command.

  Because the service is already started, and you must restart the service, you can try to stop the service, change the startup type to automatic and start the service. Check if it helps.

  Please refer to the article to define the service as automatic:

  Programs or services that use the alerts service or the Messenger service do not work as expected after you install Windows XP Service Pack 2

  For more information, see the article:

  The NET SEND command may not work correctly on a computer that is running Windows XP Service Pack 2

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• I think I need to re install off my disks again. When I ask first Pro CS5 to send my project to again, still opens but did not receive my film sequence. How can I re install again only without upsetting my film?

  Hello. I have following first Pro CS5 on Windows. Can you advise me how do to re install again off my records without affecting any of my Premier Pro film please?

  I ask Pro send the sequence of film through dynamic links in again so that I can burn the movie to a disc.

  Still doesn't open, but the sequence did not arrive to Pro.

  Last night the sequence came in again but took forever to transcribe, and I finally canceled the process as it appeared to get stuck and have not completely to writing on the disc.

  This morning the sequence are not yet in still.

  Very frustrating when I have a 4 hour movie I want to write to Bluray so I created now 4 separate sequences and try burning them to DVD in the chapters of 1 h.

  Hope someone can help me with this. See you soon. Janice

  Reinstall still will not affect your movies.

  But I would like to make send to still and do the transcoding in the first use of the Media Encoder.

  Use the Bluray H.264 preset for BluRay. For DVD use mpeg2 dvd preset and fields is higher.

  In particular, I would make for DVD transcoding with first as in CS5 will still reverse fields.

• Audio does not synchronize with the video in first Pro CS5.

  I recently did a minute 50 video in Shadowplay in format mp4 1080 p and 60 fps. When I look at the video using the default player on my Windows 10 computer application, the audio and video sync very well. However, when I add in first Pro CS5 is no longer syncs. I tried to use a custom preset but who has not yet worked.

  Playback is nervous as well?  First CS5 is older than 5 years and you can be on the 32-bit version?    Also be sure to what ShadowPlay produces a constant frame rate export.   First dislikes images of frame variable rate but which usually manifests as not be able to play all the.

  Try to run your file through Handbrake and set it to constant framerate and try again first.  Is not guaranteed to solve the problem, but removes a suspect.

• Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Download the following messages: Exit Code: 7 please see the faults and warnings below for troubleshooting. For example, ERROR: DW050... WARNING: DW036, DW066...

  -0 fatal Error (s), 82 (s), 124 warning (s)

  Any idea?

  Thank you

  Jaap

  Do you have other Adobe applications installed on your computer?

  Navigate to C: > Program Files > Adobe.

  Open the Adobe folder and check if the Adobe Premiere pro CS5 folder is created with files stay inside?

  Let us know.

  As System File Checker run command once and see if \any system files are corrupt. As you had upgraded to Windows 10 we will check the system files once. Later we can try to provide full permissions for the required records.

  https://support.Microsoft.com/en-in/KB/929833

• Video card for first Pro CS5

  I'm currently has the NVIDIA GeForce GTX 285, Win7, 6 GB RAM and periodically get the crash program and the following error when you work with projects: driver problem detected OpenGL NVIDIA with the display driver.

  I want to upgrade to a better video card and would like a professional recommendation. I want to stay in the range of $400-$500. Most of the recommendations that I looked on the forum seem obsolete compared to products currently listed on the NVIDIA site. Thank you.

  What Bill meant that with only 6 GB of RAM (which is IMHO not enough RAM to run Premiere Pro CS5 + to the satisfaction of most of the people), the high-end cards would have been a total waste of money: performance of the RAM and the large pagefile expansion will severely limit any provision of performance for the high-end cards to the point where these cards would not be a faster than cards much cheaper. In other words, there is a mounting system as fast as its weakest link (in this case, the low amount of RAM and the generally slow hard disks that are used to Exchange files). Increase in the total amount of RAM 12 GB (or better yet, 24GO) would significantly reduce the need for such a huge, slow the pagefile access. Even the fastest SSD can't stay with the RAM in terms of throughput and latency for access.

  And which causes this slow performance of your system is Windows increases generally the file exchange - and with only 6 GB of RAM and a relatively heavy such as Premiere Pro resources application, it would requre a rather huge swap file. By default, Windows sets the size of the initial pagefile roughly equal to the amount of RAM installed. What is happening here is that the difference between the amount of installed RAM, used by the first and the amount of space for swap file that requires the app is so great that it would have potentially forced the size of pagefile to mushroom in many more than 10 GB. This considerably reduces the performance of the total system, performance not only in first. Even if the size of the pagefile in Windows for an amount well above the RAM installed will not completely solve the problem of slow because no disc is nowhere nearly as fast as RAM. But if you do not use a swap file, especially with a low amount of RAM installed, the system will crash during a session of editing/rendering/encoding with "out of memory" errors.

• Why can not install first Pro CS5

  I have a clean first Pro CS5, and I can't install it on my new machine. Why?

  Hi NickStarBustter,

  Operating system of Windows 10. Can you confirm the type problems

  Your operating system is not supported: Premiere Pro system requirements for Mac OS and Windows. If the software works at all, you will have unexpected behavior that may prevent a video project.

  I suggest that you buy a separate boot disk, install Windows 7 and install first Pro CS5 on this disc. Start on this disc of any time you need to edit with first Pro CS5.

  Thank you
  Kevin

• First Pro Cs5 windows don't respondents not 10

  Hello

  After the upgrade to Windows 10, I noticed that first CS5 will not respond for 10 to 30 seconds each time I get out of the program to check e-mail, internet, and then go back to change.

  My specs:

  OS - Windows 10 pro set for priority of performance

  CPU - Intel I - 7 3960 x 3.30 GHz

  Hand drive - Seagate 750 G Momentus XT (472g free)

  Storage - Seagate 2 t in Raid 0 (234g free)

  Video card - Asus GTX 570 1280 MB 320 - Bit GDDR5

  RAM - 16g

  Any help would be appreciated.

  Hi IOU.

  OS - Windows 10 pro set for priority of performance

  Sorry, you have problems with this. The problem is that you are running an operating system not supported according to requirements for CS5. Windows 10 is simply not supported, we cannot give you advice other than the installation of a Windows 7 boot disk in your computer and first Pro CS5 install it. Start this drive when you work with first Pro CS5.

  If you use this software with Windows 10, unexpected behavior will continue to arise. If all goes well, another user will be upward to help you with these errors if you insist on running the outdated software with a modern operating system.

  Thanks and good luck,

  Kevin

• How can I go to first Pro CS5 After Effects CS6? (Problem)

  Hello

  I try to send my first Pro CS5 video in After Effects CS6, but when I right click on the clip, I can't even option allows you to send to After Effects. I can see the option send to After Effects, but I just can't select it. Any ideas?

  Thank you

  -Billy

  Versions must be the same to make it work.  You will have to perhaps put the original clip in AE and when you're done, export off AE file for use in PP.

• Transitions and effects in first Pro CS5-

  Hello

  I'm a new entry and so I have little experience. I just installed first Pro CS5 for Mac and in the effect controls panel, I find very little evidence. Is it possible to find more items to download? and in detail that can help me make a zoom on a clip effect?

  Thank you very much

  You are welcome.

  I also have pre with some of these Presets, but never use them. Whether it's pre or PrPro, I like the control I have with keyframes to these effects 'fixed '. Note: with all the video (and still images) Clips, there are effects that appear automatically. Those are fixed effects, as the movement, Rotation, opacity and Volume, if the Clip's Audio. Other effects are found in the effects Panel, and many can be alterations to the over time, in the effect controls panel.

  Good luck

  Hunt

• First Pro CS5.5.2 will not install after the replacement of the motherboard?

  First Pro CS5.5.2 will not install after replacing mothboard. It was running properly for 4 weeks before changing due to problems connecting AC and wireless connectivity.

  Adobe, case No. 183519673, Adobe engineers (Asia/Pacific) have worked on this issue for more than 3 hours with no result after uninstalling and reinstalling.

  Ideas for resolving the issue wou; LD appreciated.

  Also available at the section of material http://forums.adobe.com/message/4634472

  There is a new forum for download & install and installation issues

  http://forums.Adobe.com/community/download_install_setup

  Or, call Adobe

  In the United States - Adobe install problems 800-642-3623

  In the United States - Adobe Activation 866-772-3623 Open 24/7

  I offered to provide information of make and model of motherboard

  [Additional information about else added]

• First Pro CS5 does not not after 55 minutes of capture with intensity shuttle

  Hi and thanks for the valuable resources on this forum.

  I'm analog video capture in first Pro CS5 it using the shuttle Blackmagic intensity (with corrector time basis in the path of the video).  My shots are stopped at 54 or 55 minutes when the computer becomes inadmissible.  What happened with the codec Blackmagic movement as well as jpeg YUV 10 bit capture. Same thing if I capture with express media (blackmagic capture software)

  I tweaked my system according to the many recommendations in the forum.

  Running CS5 5.03, backup 10 minutes automatic (same problem without automatic recording or automatic check in at 20 minutes)

  Windows 7 64 bit fully up-to-date

  I7 - 930 cpu

  Gigabyte x58A - UDP5 (revision 1)

  24 GB Ram

  NVIDIA 470 - MSI twin Frozr cooling solution.

  Restore off, windows search indexing

  Followed advice from the forum and Viper about optimization system

  3 hard drives

  System on standard Sata 2 drive

  The capture of SSD drive from OCZ Vertex 3 120 g (beautiful piece of gear) of the project currently running on the Sata 3 controller

  Pagefile on another hard drive

  Uninstalled Norton 360

  Anything else I could find uninstalled or disabled.

  Firmware and latest drivers for USB of the Station pilot as recommended by Blackmagic.

  Capture of the very successful things less than 55 minutes, but I have things any longer I would like to capture at once.

  I used process Explorer to watch what is happening.  Nothing special that I can identify in terms of process, but cpu seems to be 100%.

  With the progressive settings problems remain the same.

  I'm not aware of any limit of size of file with Premiere Pro or Blackmagic - is there some?

  Whereas reinstall but would be grateful to all points of view.  My first post so I hope that I have provided good info to help me help you.

  Thank you

  Andrew

  As happens with the BM software as body, I will GUESS that the problem is with the pilot BM device that links software appliance

  I would check to see if they have a difficulty with BM

• First Pro CS5.5 crashes during video playback

  IT's REALL Y F * KING BORING. First Pro CS5.5 crashes when I press space (or by clicking on the Play button), it is impossible to change. Here are my PC specs.

  OS: Windows 7 Professional x 64

  CPU: AMD FX 6300

  RAM: 8 GB

  GPU: AMD Radeon 6570 2 GB

  QuickTime version 7.7.3

  All of my graphics drivers are up to date.

  Please help. I can't change it now.

  Oh and by the way, this is not happened with Premiere Pro CS6.

  What about the rest of the information requested in the Information http://forums.adobe.com/message/4200840 FAQ

• What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  Any help would be greatly appreciated! Thank you

  Under the H.264 are several presets for ipad.

  Experiment with those.

  http://www.Apple.com/iPad/specs/

  Looks like me 720 p is the largest export format.