Question on brush\pointer form

Similar Questions

• Satellite P100-188: type the question - forgotten key & pointer jump

  Hello

  Bought my p100-188 week last to replace my toshiba PIII 2.66. After a week I noticed that when typing unless I press really hard that it does not record the keys. Also
  the mouse pointer when it moves around the screen tends to move momentarily on a point, then jump past.

  All thought is appreciated.

  Hello

  I recommend you this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14317

  Check it out. It describes a similar or the same question. It should help.
  In addition, you should compare the version of the BIOS on the laptop with the version of the BIOS on Toshiba page. If there is a newer version so you can update. But be sure you use the good BIOS and the right update procedure.

• question them at the form level

  Hi all

  Give an example of pre-query, the trigger a time new point instance at the level of the form.

  because these triggers show at the level of forms.

  What is the use of these triggers to the level of the forms.

  Are you just trying to understand what these triggers?  If so, the best way to know is to open the help of forms on these triggers.  Forms Help topics tell you when these triggers fire, what legal commands you can use in relaxation and give you examples of the use of the relaxation.   For example, here is the article helps Forms for relaxation of prior query.

  Pré-requête Trigger

  Description

  Fires during the treatment to run the query or the query of account, just before Oracle Forms built and issuing the SELECT statement to identify the rows that match the query criteria.

  Level of definition of form or block

  Legal controls

  SELECT, without restriction of built-ins instructions

  Enter the query Mode without

  Notes on use

  Use a trigger of the query before you change the example record that determines which rows will be identified by the query.

  In case of failure

  The query is cancelled. If the operator or the application had placed the form in query mode enter, enter the form remains in query mode.

  Fires in

  COUNT_QUERY

  EXECUTE_QUERY

  Open the query

  Prepare the query

  Example query before trigger

  This example validates or modifies the query criteria for a query of database block.

  /*
   ** Set the ORDER BY clause for the current block
   ** being queried, based on a radio group
   ** called 'Sort_Column' in a control block named
   ** 'Switches'. The Radio Group has three buttons
   ** with character values giving the names of
   ** three different columns in the table this
   ** block is based on:
   **
   ** SAL
   ** MGR,ENAME
   ** ENAME
   */
   BEGIN
    Set_Block_Property('EMP',ORDER_BY, :Switches.Sort_Column);
   /*
   ** Make sure the user has given one of the two
   ** Columns which we have indexed in their search
   ** criteria, otherwise fail the query with a helpful
   ** message
   */
   IF :Employee.Ename IS NULL AND :Employee.Mgr IS NULL THEN
    Message('Supply Employee Name and/or Manager Id '|| 'for Query.');
    RAISE Form_Trigger_Failure;
   END IF;
   /*
   ** Change the default where clause to either show "Current
   ** Employees Only" or "Terminated Employees" based on the
   ** setting of a check box named 'Show_Term' in a control
   ** block named 'Switches'.
   */
   IF Check box_Checked('Switches.Show_Term') THEN
    Set_Block_Property('EMP',DEFAULT_WHERE,'TERM_DATE IS NOT NULL');
   ELSE
    Set_Block_Property('EMP',DEFAULT_WHERE,'TERM_DATE IS NULL');
   END IF;
   END;
  

  Craig...

• Random points forming a shape

  Hello

  I am trying to create an effect where I have a random collection of points in all senses that come together to form the shapes of the six countries on a map that to change to form a number subsequently.

  Is this possible without any kind of plugin?

  Thank you very much

  Of course, it is. Anything manually organize and animate the points to the use of shape layers with repeaters in the use of effects such as dance, Action Ball CC card or even good old playground of particles...

  Mylenium

• Question on the contact form

  You must forgive me as Web design is not my strong point. Not created a site in Muse, so I wanted my contact form to send a message to my email, of course, when I sent my site to the catalyst for business adobe to try, no message is sent to my email, no error message. Is there something I am missing, or something I don't have Muse? Don't forget that my knowledge of any of this web site is average, at best, and this is a personal site, nothing extreme. If anyone can help, I it would be much appreciated thanks.

  I went through the configuration details and email form added to receive notification e-mails.

  Intended to test, I added my email and sent the form and I received the notification within the second presentation. Seems there is a problem at the receiving end.

  Can you please try to use any other email and then test?

  Thank you

  Sanjit

• Question of anchor Point

  I seeks an achor point in the middle of an image for all executives leading up to a point, then have the anchor to another point, and then finally have the anchor switch back.  I tried to do this with keyframes on the anchor, but the problem is that when I move the anchor point in a second keyframe (the first key frame with the anchor point original position), the position of the image change when I go back to frames before the second keyframe.

  In other words:

  I'm trying to move the anchor point without affecting the position of the image for this particular animation.  Animate the anchor point seems to affect the position of the image.  What can I do?  Keyframe the position to stay still? Is there a better way?

  The first question I have is why do you want to do this?

  If you rotate or scale around the point of anchorage and you want to change the axis progresses the animation then maybe I'd understand, but this is the kind of a wonky workflow for me.

  Whatever it is, try to add this expression to the value of your position:

  apAdjust = anchorPoint  - [width, height]/2;
  value + apAdjust
  

  Change the anchor now now will not change the position of the layer. This works for 2D and 3D layers.

• Newbie question: how to use forms and collect signatures?

  Hello

  I could use some help on how to perform a task, I have been set.

  What we need to do:

  • Provide forms online for new recruits to view and electronically sign
  • Must be able to let people easily sign electronically forms without having to do a lot of work
  • Forms must contain a checksum to indicate that they have not been tampered after signing
  • Forms must be printable by newly hired staff to allow them to keep their information

  Can someone tell me what to do and buy so that we can do this?

  Sorry for the beginners question, but I tried to search for this and did not have a lot of luck to get a clear answer on how to do what we are looking for.

  Thank you!

  PEI

  The number of forms you'll be colecting will be a problem then. When you enable a document signed and recorded with Acrobat Pro and you distribute the form to more than 500 recipients, you are limited by the license agreement Acrobat from not more than 500 cases of the form data that was provided to you, including paper copies.

  You can avoid this limitation by allowing the reader to the document using Adobe LiveCycle Reader Extensions Server product, but this can be expensive. There used to be an Adobe authorized third party (FormRouter.com) which could compatible reader of individual documents so that you wouldn't have to license Reader Extensions yourself. I heard that they are is no longer allowed, but you might want to contact them to make sure.

  It is not difficult to set up a new digital ID. You can try it yourself to see what it is.

  Adobe also has the new EchoSign service available, then you might wish to consider to see if it can meet your needs: http://www.echosign.com/

• Questions about the data form

  Hi guys,.
  just a general question: when we do a 'big' data form, it leads to overall performance problems or crashes. My question is, which is to limit the size of data? Is it the fact that Essbase has pull up a lot of data at once? Is it the fact that web applications are limited in quality? I would just get the thoughts of people on this general issue.
  
  Another General, somewhat vague question: IF I didn't make a huge data form, say just 10 departments, 400 accounts by cost on the lines and the period, some scenarios and years on the columns, it would help if I created a machine dedicated to planning web app? Increase RAM/CPU help?

  Take a peek on "My Oracle Support" there is an article "Hyperion Planning data form Design Considerations [ID 779502.1].
  I think that should answer most of your questions.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• CS5 brush dynamic form Bug

  Problem:

  When the 'dynamic form' option in the palette brushes is unchecked (i.e. disabled) brush is not affected - there always conical ends in the overview and in fact, based on the pen pressure, as if the dynamics of form was always on. Also restore the control to other settings other than the 'pen pressure' have no effect. Other tools that use the dynamics of form, such as the pencil tool, work as expected. In addition, Photoshop CS3 on the same machine, brush shape dynamic tool works as expected. See picture for details.

  
  

  Attempted fixes:

  1. Reset brushes
  2. Reinstalled Photoshop CS5
  3. Photoshop CS5 update
  4. Updated drivers Wacom Graphire 3
  5. OpenGL drawing off
  6. Restart the machine after each of the above

  Relevant details

  Snow Leopard 10.6.4

  Wacom Graphire 3

  Model name: MacBook Pro

  Model identifier: MacBookPro2, 2

  Processor name: Intel Core 2 Duo

  Processor speed: 2.33 GHz

  L2 Cache: 4 MB

  Memory: 4 GB

  ATI Radeon X 1600

  

  Please give advice in order to correct this problem.

  You have"the tablet to control pressure" checked in the Options bar.

  

• Question camera & Modem pointing Satellite M100

  I have the Satellite M100 with Vista operating systems. When I changed the operating system a few days ago, there was a lot of drivers that have not yet been installed...
  Then I downloaded & installed the drivers from this site...

  But even now, there are 2 drivers that might not be installed correctly: * POINTANT DEVICE * (I can't use the mouse, but my touch pad works) & * MODEM DEVICE ON HIGH DEFINITION AUDIO BUS * (I can not connect to the internet via dial-up modem)

  Any ideas how to solve this problem? Thanx before...

  Pointing device, I think you need to install the chipset drivers and check again, if you have installed any drivers, amenities and followed the installation instructions.

  For Modem device, what you should you ensure you installed KB888111, KB835221. His work?
  Installed all Windows updates?

• Question/the mouse pointer while playing music

  When I play music or through Media Player or Stream on Acer Aspire 17.3 "4 GB 8.1 Windows laptop and move the pointer of the mouse while the music plays music drags or glitches while the mouse pointer moves, but will stop if I stop moving.   Any ideas on how to solve this problem?

  try to install this:

  http://global-download.Acer.com/GDFiles/driver/AMT/AMT_Intel_10.0.30.1054_W81x64_A.zip?acerid=635567...

  or try this:

  CTRL-Alt-Del to load the Task Manager
  Search in the background process to find "Intel (r) technology access Service."
  Right click and choose "end task".

• Question accuracy Hyperion Planning form online

  Hello

  I have two account members following my form online:

  -Quantity

  -Average price

  For the Member of the 'quantity' the property data Type is set to 'No money' and for 'Average price' is set to "Currency".

  My form, I want to display 0 decimal places for the 'quantity' and 'average price 3 '.

  In the "Other Options" tab, I put the Minimum values and Maximum to 0 for currency values and I put the values of the Minimum and Maximum to 3 for monetary values, but the screen displays 3 decimal places for the 'Quantity' and 'Avg Price. "

  What could be the problem?

  Thank you

  Federico

  You need to define the order of evaluation in the planning of the dimensions and the first to account. Or the value "Data Type for 'Quantity' members as no currency.

  Concerning

  Altair

• Questions on the purchase form

  Hi again, I need to help a form of contact/purchase I work for somebody attachment site.
  payment

  Is the payment for the most recent Web site page that I am working on. I have advanced and implemented, as well as the PHP form to go with it. When I test the form and click on submit, it takes me to a 405 error page and send me an email. Can someone help me through this one explain why I hit this hitch? As always, any help is greatly appreciated!

  I can also post the PHP coding here on request.

  Please stay away from that. Do not attempt to collect the details of payment or the payment process by credit card on a non-secure server, his mind.

  Use PayPal or a secure payment gateway.

• Questions in the contact form

  I created a contact simple form using the widget of Muse default email identification form has been shown my identification of email from adobe, I tried a thousand tests but nothing of the investigation have been received to my email ID.... Why...? If anyone can help out of this I will be grateful

  This has been resolved the problem is with the service provider who refuses to send a mail to an email ID. So I changed the server to make it work perfectly

  Thank you for your support and thank you so much Vivek

• I lost the adjustment brush 'points', how to bring them back?

  Hello

  (LR 6)

  Of course, I hit a keyboard and disabled the little dot that appears when you apply an adjustment brush or filter Grad. The small grey circles who have a blackhead in the Middle when this setting is selected?

  If someone could tell how re - show them, that would be much appreciated.

  Thanks in advance

  Lee

  Press "H".

  You can also select the style of show in the toolbar at the bottom of the image work area: Show the pines Edit. If you don't see the toolbar, press 't'.