Question on create Redo log after restoring files and recover

Similar Questions

• Create the REDO Logs after restoration of RMAN

  Version 11.2
  Platform: Solaris 10
  
  We restore the cold RMAN backup to a new server. It's a basic restore RMAN where DB name remains the same.
  
  I understand that RMAN backup online redo logs, and for good reason.
  
  We have restored our datafiles successfully. The control file still has the old entries so the query below shows old information about recovery logs
  
  -Display of the configuration of the log file the old control file data

  SYS > select * from v$logfile;         ------------> The below output shows the result of the source server
  
      GROUP# STATUS  TYPE    MEMBER                              IS_
  ---------- ------- ------- ----------------------------------- ---
           1         ONLINE  /DATAM/DB/oradata/slmps/redo1.log      NO
           2         ONLINE  /DATAM/DB/oradata/slmps/redo2.log      NO
           3         ONLINE  /DATAM/DB/oradata/slmps/redo3.log      NO

  I have to use ALTER DATABASE RENAME FILE command as below to update the control file.

  alter database rename file '/DATAM/DB/oradata/slmps/redo1.log' to '/data/oradata/slmps/slmps_log01.dbf' ;
  alter database rename file '/DATAM/DB/oradata/slmps/redo2.log' to '/data/oradata/slmps/slmps_log02.dbf' ;
  alter database rename file '/DATAM/DB/oradata/slmps/redo3.log' to '/data/oradata/slmps/slmps_log03.dbf' ;  

  Currently, in the new server, at the level of the BONE there is no physical file above to
  

  /data/oradata/slmps

  I need to create physically redo new logs using the command or the command ALTER DATABASE RENAME above key create a physical file at the level of the BONE?

  Salvation in spiral,

  Surely, RMAN will search for redo logs when RECOVER is issued.

  When you issue the command RECOVER after restore, RMAN does not check online redo logs. During RECOVERY, RMAN will try to apply the archivelogs or incremental L1 if it has been saved on the source server. RMAN Backup restorations online redo logs or never.

  Here OP tries to restore the backup from the cold to a new server. In this case the RECOVER command is not necessary. The example of the Oracle doc you mentioned should do a restore, recovery of a backup hot. In this case, during the RESTORATION, RMAN will try to apply archivelogs or L1 of the incremental backups.

  In both cases (cold backup restore or restore, recover from Hot Backup), it is the

  alter database open resetlogs
  

  command that will create the online redo log, so it is absent in the location specified by the control file. Because it is a restoration to a new server, recovery logs is missing because it has not been restored (because it has not been saved)

• Path of redo logs after restoring controlfile

  Hello!
  
  After restoration of the controlfile I see distorted redo logs metadata (column v$ logfile.member):

  $OH/dbs/data/ora/MY_SID/rlog/redo1a.log

  in the redo logs placed in another directory, source database
  also I should drop logfile member and log file groups, and then create them again, but may be there other way to solve this problem?
  Please notify.
  I'm usung 11.2.0.3
  
  Thank you and best regards,
  Pavel

  As I said earlier, is that your database is working well? If so, then forget those files which are present in $OH/dbs/data/ora/file/rConnectez/MY_SID. Ok?

  Suppose now, the question is what are these files? Who created/copied?
  So the answer is if these files are used by your this database (MY_SID); that can be confirmed by query:
  Select Member from v$ logfile; then the redo logs are used by this database else chances are these files were the first part of this database, but not now due to may be a corruption that happened, so another / previous DBA has left.

  And if the database is not running, then what is the error you found it please post it here; otherwise leave these files such what.

  Concerning
  Girish Sharma

• After backup files and restoring Windows XP, I can't open the files backed up.

  After backup files and restoring Windows XP, I can't open the files backed up. The files are password on a user account. I know the password. But the message received when you try to open them is: access is denied. Drag / drop the files in 'Shared files' result in the same message. I know that the files exist, because when I open backup and browse for them, they are displayed. Is there a method to open? I have Windows XP Media Center Edition, Version 2002, Service Pack 3 update. I tried to back up the files with backup of backup, but it does not work.

  Hi error,.

  I suggest you follow the article in the Microsoft Knowledge Base and check.

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  I hope this helps.

• iPhone 5 s still says connect to itunes after restoration. And he repeats after a month

  iPhone 5 s still says connect to itunes after restoration. And he repeats after a month

  You have the latest version of iTunes?
  and why you restore your phone once a month? Are you making you do questions?

• I can finf a log of deleted files and folder in Event Viewer

  can I finf a log of deleted files and folder in Event Viewer ARE ANY TOOL

  Hello rameshkumar_11240,

  Thanks for the reply.  For the question that you described above, please transfer this issue to the address provided below in Microsoft TechNet Forums.

  Microsoft TechNet forums

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• I can't see all folders in library mode because my hard drive had to be replaced. How to restore files and photos?

  I can't see all folders in library mode because my hard drive had to be replaced. How to restore files and photos, so I can link to the catalog?

  The original drive I had was called E:... THAT IS, FILE NAMES ARE!

  If you would like to recommend that I go to each of these lines and redirect each of these folders, right?

  Yes, reconnect the top-level folder on drive E:, as shown in Figure 4 here: Adobe Lightroom - find folders and files moved or missing

• I just wrote about firefox 3.6 with 5.0 for my mac OSX and discovered that my mac will not support it. Is there a way I can recover my lost files and recover the old version?

  I just wrote about firefox 3.6 with 5.0 for my mac OSX and discovered that my mac will not support it. Is there a way I can recover my lost files and recover the old version?

  You can download and install Firefox 3.6 http://www.mozilla.com/firefox/all-older.html

• How to replace the members of the Group missing redo log after the failure of a support

  Hello

  I'm testing a disk failure scenario.  I had recovery multiplexes on three sites (Windows drive letters) logs; one of the three locations also contained the data files.  I deleted the Windows player that contained data files and saw a restoring with RMAN.   All is well except that redo log members who are found on the occult Windows disk are of course still missing; the database opens, etc., but puts messages like this in the ALERT.log:

  ORA-00321: log thread 2 1, cannot update log file header
  ORA-00312: wire 2 1 online journal: ' F:\APP\NGORA12CR2SRV\ORADATA\ORATEST5\ONLINELOG\O1_MF_2_BW4B5MY0_. JOURNAL"

  
  

  What is the 'right' way to replace missing limbs?  Just get all the new groups of newspapers with new members on all three discs?  Carefully copy the LOG files representing missing members of one of the other sites?  I add new members at this location and remove existing members (missing)?

  
  

  Is how important it?

  
  

  Thank you!

  
  

  Martin
  

  See 'Recover after losing a member of a group of Redo Logs online multiplexed'

  at http://docs.oracle.com/cd/E11882_01/backup.112/e10642/osadvsce.htm#sthref2205

  Hemant K Collette

• How to create Redo Log as a good way to avoid the problem of performance

  Hi Experts,

  I work in the following environment.

  OS - Windows server 2012

  version - 11.2.0.1.0

  Server: production server

  1 to 10 of each month, we have huge process. Like many DML and ddl involve.

  I've implemented the RMAN also.

  My Alerts log entry is as below,

  Kills Sep 08 17:05:34 2015

  Thread 1 cannot allot of new newspapers, 88278 sequence

  Private stream flush is not complete

  Currently journal # 1, seq # 88277 mem # 0: D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO01. JOURNAL

  Thread 1 Advanced to record the sequence 88278 (switch LGWR)

  Currently Journal # 2 seq # 88278 mem # 0: D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO02. JOURNAL

  Kills Sep 08 17:05:38 2015

  Archived journal 81073 extra for each sequence 1 88277 0x38b3fdf6 dest ID thread entry 1:

  Kills Sep 08 17:05:52 2015

  Thread 1 cannot allot of new newspapers, sequence 88279

  Checkpoint is not complete

  Currently Journal # 2 seq # 88278 mem # 0: D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO02. JOURNAL

  Thread 1 Advanced to record the sequence 88279 (switch LGWR)

  Currently Journal # 3 seq # 88279 mem # 0: D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO03. JOURNAL

  Kills Sep 08 17:05:58 2015

  Archived journal 81074 extra for each sequence 1 88278 0x38b3fdf6 dest ID thread entry 1:

  Kills Sep 08 17:06:16 2015

  Thread 1 cannot allot of new newspapers, sequence 88280

  Checkpoint is not complete

  When I check in the internet I found a few points and need clarity also by the following.

  -It is recommended that this switch Redo log 5 times maximum per hour, but I have this time of maximum peak about 100 redo log changes occur.

  -It is recommended to have the large size of the Redo log. But I have 3 Group of redo and each size is 50 MB by default.

  -My group of Redo log not multiplexed and it by default with each group have only a single Member

  Group 1 - D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO01. JOURNAL

  Group 2 - D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO02. JOURNAL

  Group 3 - D:\APP\ADMINISTRATOR\ORADATA\AWSPROCESS\REDO03. JOURNAL

  And advised by experts with add that again group will give more performance in the other location. Is it mean that I need to add the Redo log as a different group, player or Redo Log itself I need to replace the other location.

  Say in the end, My Live server works with the location and size of restore default. I'm trying to create a better way and get all confused

  How to do it perfectly.

  Experts, please share your comments to my environment to log redo instance as better through your comment or recommended weblink based on my above needs, or a document.

  Thanks in advance, if you need more information to help me, then ask me, I'll share you.

  Hello

  You can't resize an existing redo log group.

  You will need to create 3 new redo log groups and drop old log redo (with 200 MB size) groups.

  Here you can find a good explanation: DBA for Oracle tips Archives

• Increased repository DB redo logging after upgrade EM12cR2?

  Has anyone else noticed increased redo logging in their repository database after upgrade to EM12cR2?
  
  I'm running on Linux x 86-64 with a 11.2.0.3 repository database. Before the upgrade, I was running 12.1.0.1.0 with BP1, and my repository database produced, on average, about 80-120 MB of archived redo logs / hour. Since the upgrade to 12.1.0.2.0, my product repository database, on average, 450-500 MB of newspapers archived redo / hour.
  
  Reclassification of deployed agents of 12.1.0.1.0 to 12.1.0.2.0 has not seemed to help; I've updated about 10 of the 15 without any apparent loss of logging of redo.
  
  I was wondering if it's comparable to what others see, or if I have a local question I should study.

  The following fix has been released for this problem:

  Patch 14726136 - INCREASED REDO LOGGING ON REPOSITORY DB AFTER UPGRADING TO OEM 12.1.0.2

  Kind regards
  Vincent

• A PL/SQL to add the archived redo log for logminer files - please help debug

  Hello
  
  I have a PL/SQL to add recovery logs a day archived files to logminer utility in order to catch all LMD, which happened for a paticular at a particular time scheme
  
  as below,
  
  -logmnr.sql
  
  Set serveroutput on
  
  declare
  
  v_redo_dictionary_file VARCHAR2 (100);
  v_archived_log_file VARCHAR2 (100);
  
  -catch all them archived redo logs today, put in a cursor
  
  CURSOR logfile_cur IS
  SELECT name from v$ archived_log WHERE the to_char (COMPLETION_TIME, 'dd_MM_yyyy') > '18_01_2010' and not in sequence # (select sequence # v$ archived_log WHERE DICTIONARY_BEGIN = 'YES' AND dictionary_end = 'YES');
  
  
  Start
  
  -Create the DICTIONARY file on the files of the SOURCE database redo
  
  sys. DBMS_LOGMNR_D.build (OPTIONS = > sys.) DBMS_LOGMNR_D.store_in_redo_logs);
  
  
  Select name from v_redo_dictionary_file from v$ archived_log where DICTIONARY_BEGIN = 'YES' AND dictionary_end = 'YES', and sequence # = (select MAX(sequence#) from v$ archived_log WHERE DICTIONARY_BEGIN = 'YES' AND dictionary_end = 'YES');
  
  -Add newspapers of dictionary files
  sys.dbms_logmnr.add_logfile (nom_fichier_journal = > v_redo_dictionary_file,)
  Options = > sys.dbms_logmnr.new);
  
  -Add the log files
  
  Open logfile_cur;
  
  LOOP
  
  SEEK logfile_cur INTO v_archived_log_file;
  EXIT WHEN logfile_cur % NOTFOUND;
  sys.dbms_logmnr.add_logfile (nom_fichier_journal = > v_archived_log_file);
  
  
  END LOOP;
  
  CLOSE Logfile_cur;
  
  -Start LogMiner, also enable the ddl
  
  sys.dbms_logmnr.START_LOGMNR (options = > dbms_logmnr.dict_from_redo_logs + dbms_logmnr.ddl_dict_tracking);
  
  EXCEPTION
  WHILE OTHERS
  THEN
  DBMS_OUTPUT. PUT_LINE (SQLERRM);
  
  END;
  /
  
  
  ###############
  SQL > @logmnr.sql
  ORA-01291: missing logfile
  
  PL/SQL procedure successfully completed.
  
  What I did wrong?
  
  Thank you very much
  Roy

  [Double wire | http://forums.oracle.com/forums/message.jspa?messageID=4035521#4035521]

• After you restore files and system settings collected with FAST problem

  ON a windows XP Professional computer, I created a file and the backup of the system using FAST and when I try and restore, in my view, that the backup of files on an external drive, but a get an error message that I can't access these data.

  Hello

  Unfortunately, I wasn't able to find that everything about the software you mentioned in your post. I suggest you to contact the manufacturer of the backup program you use for assistance.

  I suggest you to return the items mentioned below.

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/308422

• Organizing items - folders after restore tree loss / Lost files after restoring files tree

  Hello

  I just reinstalled Windows 7 and installed my software (especially "Adobe elements Organizer V12").

  I then did a restore of my catalog from external backup.

  This restoration is successful, but an owner problem.

  Indeed my photos are now each into separate folders and I don't have the original tree of my files.

  For example, I had before a "Birthdays" folder with subfolders "2013", etc. "2014".

  Now I have the folders '2013', '2014' but I have more Microsoft Group folder in the "Birthday" parent.

  In view of the number of relevant photos, I would like to find the LUN tree promotion documents.

  = > Issue my where: how?

  Thanks for your help

  alaincln57

  ____________________________________________________

  Hello

  I just reinstalled Windows 7 and installed my software ("Adobe elements Organizer V12" especially).

  Then I did a restore of my catalog from external backup.

  This restoration was well done, but the problem remains.

  Indeed, my photos are now each in separate files and I do not have the original tree of my files.

  For example, before I had a 'Birthday' folder with subfolders "2013", etc. "2014".

  Now I have '2013', '2014' files, but I don't have the combination to the "Birthday" parent folder.

  Given the number of relevant photos, I would find my folder tree.

  = > Where my question: how?

  Thank you for your help

  alaincln57

  Generally, if you are satisfied with the last conversion to version 12, it is not useful to keep the old formats. Especially if you do not continue to use the older versions 10. Anyway, you can't retro - convert from the 12 version to version 10, and it is very difficult to maintain synchronization between two versions of a catalog.

  Possible exceptions:

  -Some features have disappeared from recent versions, and you want to be able to use either the Publisher 10 or 12. You notice so the editor 10.

  -l' Organizer to undergone deep changes since version 10, especially on new tabs of categories: people, places and events. If like me you don't want to accept the new format, view catalogues version 10. You can avoid the automatic conversion of these categories.

  -version 13 Windows is 64-bit, and you can keep the previous catalogues pour not to lose some plug-ins and eventually be able to share catalogues version 12 or earlier on other computers

  -new slideshow editor has lost beaucoup features. Version of the 12 conservation and its catalogs can be a good solution.

  Pour the Photoshop file, no problem. You can rename it from the Organizer.

  The ProgramData file should be deleted, or at least renamed pour avoid ambiguity with the true on C:

• Redo Logs after duplication 3 RAC node to node 2 RAC

  I use RMAN to clone my production database 10.2.0.4 (3 node RAC) in my test database (2 node RAC). When I finished, I find myself with the Redo Logs from the 3rd node RAC in a State of "weird." Newspapers of recovery for "thread 3", which does not exist, cause no problem, I want to clean them and reclaim the space.
  
  Ideas or suggestions?
  
  Thank you!

  Have you tried: -.

  ALTER DATABASE DISABLE THREAD 3.