question on horizontal Manager

Similar Questions

• Question questions Apple ID management and security

  Tponging, on my iPhone, a message appeared on the screen to say that my ID was used to connect to iMessages and FaceTime on my "ipad3. I don't have a device called 'ipad3', so I was naturally suspicious. First question - can you be spammed by screen pop up? It wasn't an email but a message on the screen that displayed randomly.

  So I decided, to be on the safe side, I try and change my Apple ID. I managed to access the page "manage your Apple ID", but after several attempts to try to guess the answers to the questions of ID I do not even create, I was told I had used "too many attempts and now my account is blocked." I tried after contact with advice from Apple on another post on the forum, but the contact for the United Kingdom led to a page that says ' we are not available right now, please try again later ". So how can second question - I get my account now? It seems that if there has been a breach of security, spammers have done a better job than me to break the security of Apple! Help, please...

  Yes, the fake pop ups are possible in Safari, but it is unlikely for this message. There is no advantage to any con man, unless he directed you to a Web site or dial a phone number.

  You should directly contact the apple Support, starting with the link contact Apple at the bottom of this page.

• Horizontal management; Animation of land

  Hey,.

  I'm not sure if I came across an error within the blackberry platform or not, but this is the situation. I have a CustomManager that contains 25 fields with a horizontal scrolling. Scrolling of the field is great and all the fields appear. However, the issue I stumbled on was the TouchEvent method contained in the fields themselves. Generally, my plan is to highlight a certain area in the case of development. Therefore, I check if the global coordinates were contained in my HFM and then checked to see if the field is in x and y location contained in the Manager. It works until the user scrolls the HFM. By debuggin my request, I noticed that the scope of the field never gets updated as long as the user scrolls the default position. To what extent is not the position of the field in the visible site?

  Mitchell Romanuik.

  Edit: the solution I stumbled on that is simple. Clear, that I don't understand how the touchEvent still work after reading the documentation because I changed the return false instead of true to produce the effect I wanted. Perhaps that there is false for the touchEvent in Manager can be pulled? Who knows. Problem solved, however.

  In my code, I add getHorizontalScroll() to message.getX (1) and getVerticalScroll() to message.getY (1) in order to obtain the position of contact in the coordinates of the Manager.  Then you can check if the measurement of the field contains the position of the button.  His Manager scroll that he cannot update its scope - given that the field does not make up for this with your treatment touchEvent.

  Oh and even if you treat things like TouchEvent.DOWN, do not call super.touchEvent after DOWN - this might be the beginning of a sudden or a move (or a CLICK or a TAP, or...).  That's why return false product for best results - framework fed BB the event to the rest of the affected areas.

• Addition of BitmapFields to Horizontal Manager

  Hi all

  I have a popupscreen (VerticalFieldmanager) I added an editfield, a LabelFieldby directly by calling (editfield or labelfield) and a Horizontal add field (horizontalField), calling for this horizontalField, I added four BitmapFields

  Problem:

  (1) I need padding or space between four bitmapFields

  (2) how to resize BitmapFields

  (3) how to draw a Rectangle when BitmapField is concentrated, where to write this method, what precauctions must be in subpaint (Graphics g)

  Help:

  If anyone has some tutorial or examples graphics or managers, please specify a link. Documentation is not clear in detail, when to use subLayout and subpaint

  I suggest you familiarize yourself with

  http://NA.BlackBerry.com/eng/developers/

  Note the resources option that brings you here:

  http://NA.BlackBerry.com/eng/developers/resources/

  From there, there are many places to search for information on other issues you may have, and this

  In particular, in this case, I suggest you look at the videos section, there you will find two very helpful videos on the screens and managers, which fills some basic information you need.

  In addition, all your questions are answered in various posts on this forum, I suggest do you good research tour and see what you find.

  Good luck.

• Call the question of routing Manager

  Allows a calling Manager route to an extension based on the time of day?      For example, a call incoming during opening hours, calling press 0 and the call goes to the operator.    Incoming calls during the closing hours, calling press 0 and the call will the night watchman.      Is this possible?

  Thank you - Pat

  If you use Cisco Unity Connection, you can use the system lists to accomplish your question.  Basically, you say: 0 option to send a Manager to call "Operator called" or something else.  you attach a schedule to it and use the rules of transfer closed & STandard.  During the transfer of the normal working hours (hourly) to X and during the transfer closed at X.  Another way is to route the call to CUCM and using TOD routing in CUCM.  The easiest way is to use the unit.

• Questions about the management of specific nodes in different hierarchies

  Hi all

  I have a question about the specific management of some particular set nodes, which are located in different hierarchies within a same version.

  I want to know if there is any editing made to certain properties of these specific nodes or if the nodes are deleted/moved/edited approval to be triggered for the data manager.

  or should not allow users to edit (adding/moving/deleting/changing property values) or those specific members.

  
  

  According to my understanding of the nodes of domain prevents the removal of nodes, but I don't want my Member prefix/suffix, domain is the only way to prevent the change.

  
  

  
  

  
  

  Thanks and greetings

  Madhu
  

  We have an obligation to not allow a node to remove or deleted without the approval of the admin, so I created a Boolean property AllowDelete is false, which is substitutable, default and is available only in a category of property Admin, for which most of the users do not have access.  Then, I created a validation of PropRemove with an error message that tells the user to contact a user admin to remove or delete the node.  The admin can change the AllowDelete to true, then can either remove himself or to allow the user to do.

• How to upgrade all of the drivers in question mark Device Manager?

  Hi all

  I have a Dell R730 and I need the image of the old server to Windows server and restore it in the R730. So, once its completed, Device Manager displays a lot of pilots in question mark.

  Is there a tool I can update the drivers?

  Thank you very much!

  Urbansaint,

  The tool you need is called the Dell Server Update Utility (SUU), is run from the operating system and updates the entire server. You can find the download here.

  Now on a side note, we do not support or even really recommend using imaging between 2 servers. This is due to the fact that when wearing on the new MAC Imaging server and system of the original system state data transfer on. This can cause instability of the system, this is why it is not recommended.

  Let me know how it goes.

• Question about Lab Manager and ESX Resource Pools

  Hello world

  I was wondering if I can get feedback from some of the members of the community.  We used Lab Manager very strongly in our support organizations and it has proved to be a valuable tool.  Recently, we collaborated with the Department of technical training and started hosting online seminars and classes for them using Lab Manager.  Last week we had a fairly large class of users (approx. 45), each duty deploy 2 rather Beefy VMs that were very intensive resources (Jboss, SQL, Mail to name a few).  My colleague and I went through a lot of trials and planning to ensure that our infrastructure can handle the load while allowing our users to date at the same speed and reliability, so that they are used.

  Our Lab Manager ESX server pools made up of the following:

  5 HP DL380 G5 servers with 2 x Quad Core 2.8 GHZ processors (8 cores each) with 32 GB of RAM each

  2 HP DL580 G5 servers with 4 x Quad Core 2.8 GHZ processors (16 cores each) with 128 GB of RAM each

  When the class is running and everyone has made their 2 machines, we noticed for some reason, he was all on ESX2 and 3 deployment (380 s).  Then came the ESX alarms, use of 90% of memory, then more than 100% bringing the disk page.  The CPU usage was at a all time high.

  I look at the 2 580 s and there are about 4 virtual machines deployed on them.

  So my question is...

  How does he know where to launch a Virtual Lab Manager machine?  There's no sense 2 servers have been brought to the red zone, and almost overloaded when the 2 most powerful servers in my farm are nearly dormant.  I noticed sometimes in the past, but not this bad.  Normally, we have about 45-50 computers deployed at some point and it seems to spread them out properly.

  This group of training has access to the same LUN and ESX server with Betclick as any other organization that we have.

  We have decided hosting several sessions of training may be greater than this one and would like to know that the virtual machines will be distributed properly.

  I would like to know your opinion on this

  First to answer your question, then make guess what happens.

  As indicated in response Ilya, LM distributed VMs differently with active DRS resource pools and pools of resources without active DRS.

  LM place VMs when the DRS is not used.

  When DRS is used, we use the DRS admission control to select the host to place virtual machines.

  DRS is turned off, LM uses its own placement routine:

  For each virtual machine, LM filter all managed servers that cannot run the virtual machine. A complete list of patterns are:

  • The managed server has not enough memory or quota for virtual machine to run the virtual machine.

  • The host is not connected to the data store that is the virtual machine.

  • The virtual machine has active state (suspended) and the CPU of the server managed by the waking state has been captured is not compatible with the managed server currently considered.

  • The virtual machine has been a guest on 64-bit and the managed server is not 64-bit capable.

  • The virtual machine has more processors than the managed server.

  • The managed server is not accessible or is set to "prohibit deployments." Not reachable may mean that the lm-agent or its not to ping queries is not answer (this is visible in the list of managed server page).

  Once we have the complete list of eligible servers, we place the virtual machines on the host including the smallest (MemoryReservation % + CPUReservation %). By default, we reserve not CPU on LM VMs, this internship will be largely due to the memory on the host computers if you have not changed the settings of reservation of CPU on your virtual machines.

  For closed deploy to the PF3, force us all virtual machines to go on the same host, so if any virtual machines have any special data store / CPU type specification, all virtual machines is forced to go on this host. If there are conflicting requirements between different virtual machines in the same configuration, deployment will fail. Closed VMs also have another condition to check that is rarely achieved in practice: number of closed networks available on the managed server. By default, this is 20 and you will need more than 20 different configurations closed running on a managed server before you who will strike.  (LM4 allows Cross fencing host, so this does not apply in LM4).

  To make a guess blind because of your distribution problem - if you use the saved state and fencing, it's probably the type of processor.  Processor type can be checked on the host properties page.

  If you not are not I would check that the images can deploy on the 580 s by disabling the 380s and trying to deploy them.

  If you use DRS (which you're not), it could be due to deployment of virtual machines too fast for the algorithm of control for the entrance of VC.  An easy solution for this is to extinguish the DRS on the cluster manager of laboratory.

  We tested load internal repeatedly, the product QA in different laboratories, we run (LM has been used in VMworld Labs for the past couple years and internal systems of training and demonstration for our Organization implemented SE), so no need to worry about this.  I assure you that the first 'real' performance problem you will encounter will be almost certainly due to an overload of your storage array (too many IOPS / s)... and for that you have to distribute content in data warehouses and use techniques of creating paths to balance the load.

  Kind regards

  Steven

  Another thread on this: http://communities.vmware.com/message/1258902.

• questions about release management?

  Hi experts jdev,.
  
  Well good morining at all. :)
  
  use jdev 11.1.1.5.0 - adfbc-version management.
  
  question 1:
  
  Sometimes when I give validation (the file that is located on managing versions) is say an error box prompt me "obsolete".
  
  question 2:
  
  In Pendng Exchange (subversion) incoming palette section somefiles are there but do not want the files (thums.db, and for - we) in the management of versions.
  
  I want to delete or remove this incoming section. How I can do. /
  
  updating files each time I had to h keep my eyes too big to do. unwanted files hurt. so I never commit that file...
  
  I don't want this file which is in incoming. is there a delete that option?
  
  can anyone suggest me.

  ADF7,

  you messed up your repository...

  T1) "expired" means that the repository contain a version more recent file you have tried to access your room.
  Solution: before you check in your file, you must do an update of the repository. In the process of updating your files, sometimes destruction, conflict, additions and automatic mergers. There is nothing you can do about it. You are allowed to check in your changes if your version of a file is identical to the version in the repository. If you see a conflict you must merge the files manually (jdev will help with that).

  Q2) you cannot delete files in the incoming changes tab. You automatically get these files the next time that you update the project. See answer to q1.

  To clear the thing a bit, you must remove the thumb.db in the repository: open the browser of Version, open the connect to your storage space, open the project that you are working (for example the trunk) and you should see the folders and files, as in Solution Explorer. Locate the file you want to delete, select it and press "del". Now you should get a dialog box where you can enter a message why you deleted the file. Click OK (or commit?). Now the next time that you update the project in jdev file will be deleted from your working copy too.

  Then, you must configure your jdev so that these files are not placed in the repository in the first place. To do this, you add a template to the list of global exclusions (Tools-preferences-global ignore list). If you want to ignore a specific file (which is currently not in your repositiry) you can select in your project add to .svnignore. To do this right click on the file, select version management and click on 'add to svn:.svnignore '.

  Tips: before you start to clean your repository you make a backup copy of your repository and working copy projects on your pc. It is sometimes easier to remove the project from the repository and check it in once you have set up all the PCs to work with the repository in a way you like. If you go this way, you must configure the project from scratch, which means you need to remove all .svn project folders, make shure you have a version of the project which has all the changes of your colleges. This serves you again master. Once you have tested this new master you can put it again under source code control. Then all colleges check it out from the repository (which they need to delete the old folder before that). Be aware of the fact that the project loses its history in doing so. So there is no way, you can revert to a previous version.
  You need to implement some sort of rule that e.g. every day before starting work to do a "copy of the update work". This reduces the number of conflicts that you get when you check in your changes. IT should not influence your work, you need to do the update working copy before checking in your changes (if you get a stale).

  Timo

• Question on Update Manager (classified "Available path")

  Hi all:

  I have a dummy question: what is him classified 'Patch available' means in the Update Manager?

  I found nothing in the documentation...

  Thank you

  Olegarr

  I could be wrong, but perhaps he says true or false, because these fixes are available in your repository to update.

  When was the last time your VMware Update Manager download update ran?

• Newbie question of color management

  Hi people

  using cs4. just finished a CMYK job on a new press. colors on the final print job were pretty loyal to what I saw on my screen when you design, with a few exceptions I want to tweak if possible. I'm new to color management, so looking for some advice.

  According to my research, the right thing to do is to ask a colorsync or icm or icc of my press profile. I did... but my press was a little confused and sent me a bunch of .icc files and I don't know that one to load. people in the press are great people and it's a good press, but I had the feeling that they have not been asked this question a lot. so I ended up using U.S. web coated (swop) v2 profile, which is what they recommended in the end.

  so if I can't get one of my press icc profile, the other approach according to my research wing and adjust the color on my own profile so that what I see on my screen match the printed output. in other words, I take the printed output and hold it up to my screen and manually adjust the color profile settings. I think that this is done in photoshop under edit-> assign the profile and/or edit-> color settings, and then synchronize the color management for all applications using the bridge. Maybe it is possible in indesign? I ask the question on this forum because of the excellent answers that I'll be back here.

  I don't want to screw things up and I'm a newbie with this, then advice out there? My basic situation is that the colors were reasonably loyal but there was a very curious thing where a c = 0, m = 0, y = 35, k = 15 color looked very green on the printed page even if it was a soft yellow on my monitor. I want to try to adjust that.

  Thank you...

  You have a colorimeter and monitor profiling software? It is the starting point of all color management workflow. You also need a pretty good monitor that CAN be calibrated. If the monitor isn't showing you exactly the colors, then nothing do you will to matter.

  Matching the print monitor is an old technique that works only when you have a closed loop where all the work is output on the press even under the same conditions. The purpose of the peripheral use independent publishing spaces, such as Adobe RGB, which is in theory everything correctly calibrated monitor will display the same image, and you can convert any space of output known at the time.

  Terms like watching soft yolks are quite subjective, so I don't know what you expected, but I do not expect 35y, 15 k to be very clear, nor very yellow. While I would not characterize as green color on my monitor, it is certainly not resemble a banana, and beside a clear yellow could be called it greenish in comparison. It's really a yellowish gray clear, in my view.

  I put up a comparison here to see what it looks like, but the colors won't be accurate in a browser.

  

• Questions about the management of Siebel

  Hey all,.
  
  I have the following questions:
  
  1 - what responsibility / way for Siebel users only read only function on Siebel Call Center (all screens) and Siebel eService
  
  2 - visitors can read only certain statuses in Siebel eService for a Service Request Status (for example, a customer response wait state)
  
  3 - How to manage products in Siebel screen so that I can enter the names of the products and by-products (could rename the Parent product and child fields for products and by-products?)
  
  
  
  Kind regards
  
  Published by: Hamzeh Al-Karmi, Sep 14, 2010 01:57

  Hi Daniel,.

  Well I am fairly new to Siebel as well. Your basic documentation should be Siebel Bookshelf. There is also a lot of useful forums and articles about Siebel to start to learn...
  for the need, you can try searching for a user property called 'on Update Set field' in the library. With its help, you can set a field in dependence of another field. That would be a possibility in my opinion.

• Multiple choice questions and quiz Manager

  This a question simple, but for some reason I can't fix it. In the quiz Manager, took me seven options for the multiple choice answer. However, only 5 appear on the screen, don't know where the other two went.
  
  If anyone has experienced this? How can I fiz it?
  
  
  Thank you!!!

  I answered my own question. The film size was not large enough. I did the full screen of canvas then changed the movie in smaller size.

• A few questions about the management of the partitions when you perform a recovery

  Hello everyone,

  I bought a L505-13Z on weeks there are for personal use and editing of audio work light. In these two weeks, I took the time to explore and test the performance of this computer and judged suitable for my needs because it resists even havier audio work so I'll need, what it is tested. I am really satisfied with this laptop! In any case, some optimizations I did for audio software suffered a few necessary features of the computer, so I need to reinstall the operating system... Basically, I was always used to install only the system drive wiping system, leaving the score of "D: Data" intact. I noticed that this is not the case with the recovery of the system, because after the restoration, system partitions and data disappeared. of course everything is saved on an external drive, but every time I have to restore, I need to copy everything back from the backup drive? I missed the point of this - it's exactly like having all my data saved on the system partition. What, then, is the need for the data partition?

  Is there a way to recover and leave intact the partition 'Data'?

  My second question is if it is possible to change the size of the partitions somehow? I think it's a bit pointless to have 230G of free space for the system partition. 100G is sufficient for my needs, and I could use the 130G remaining for the data partition, I don't know why the drive is simply divided into two by default... (I am aware that a change of size of partition must erase all data on the disk).

  Thank you all in advance for any help!

  If you use the procedure of recovery disc HARD - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm - structure and the data on the second partition will not be deleted.
  So, if you want to install OS using HARD drive recovery option you can move all the important data of the C partition to D partition.

  The whole HARD disc will be deleted if you use recovery DVD for installing the OS.
  ----------------------------------------------------------
  You should not change the partition structure because it can have a negative influence on the recovery procedure more HARD drive. It can happen that data recovery will be will be more found.

  Please note: second partition D is not a kind of system partition or recovery. This is normal and usual HARD disk partition. He is saved just Toshiba recovery image in the folder called HDDRecovery.
  You can do it, I did too, it is better to enter the properties of this file and set it as invisible.

  You will not be irritated by this file. It's there, but you can not see and there is no way that you can remove it somehow. Use this partition as usual. Create own folders, copy data here, just do your usual work.

  Any other questions?

• Reprint of the old questions about daily management print app

  Can I reprint already old issues of the daily managers print app? How to do this?

  I agree with managers Daily app impression, then she left issue 510. I want to get them all since the first issue until the current issue.

  Hey,.

  There is no way to go back and reprint old issues.  You can only get the question currently being printed and only when it is available.  Once this time is not available.

  You may be able to find a person who has all the previous numbers that can scan and then send to you however.

  Good luck

  Jason