Question on install the last WGA

Similar Questions

• After installing the last "Update Agent" I can always get updates for Windows 7 Home Premium?

  After installing the last "Update Agent" can't always updated for

  Windows 7 Home Premium?  After 2 days in dealing with this problem, I came to help?

  Someone please give me an answer!

  E-mail address is removed from the privacy *.

  Hello

  Please contact the Microsoft community.

  As you said that you are not able to get new updates of windows on the computer.

  I would like to ask some questions about your request:

  1. When was the last time that you install the windows desktop update?

  2. You receive an error message from the updates?

  3. You use any third-party antivirus on the computer?

  4. Did you do any change on your computer before the show?

  Please refer to the reference to the link below for " " " The problems with installing updates".

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Please get back to us with the information in short so that we can help you further.

• iPad Pro will not install the last update of iOS, says that it is not connected to the Internet. It is connected!

  MY iPad pro(9x7) will not install the last update of iOS. I get the message it is not connected to the Internet, but it is connected! I have f

  I istalled the update on my iPhone 6 without Ant problem. I tried switching off and on again, but the result is the same, it will not be installed.

  I just read a post that Apple released the 9.3.2 update for iPad 9.7 Pro. Cannot confirm this, but not me. See post by Phil.

  iPadPro9.7 said that current operating system 9.3.1 will not update 9.3.2

• I can not send attachments to the e-mail (msn, hotmail) and was told to reinstall silverlight, but I can't uninstall it, and I could not install the last update.

  Silverlight only updated [failed] and I cannot uninstall

  I can not send attachments to the e-mail (msn, hotmail) and was told to reinstall silverlight, but I can't uninstall it, and I could not install the last update. Any suggestions

  Please repost your request in the Forum Microsoft Silverlight.  Thank you! Carey Frisch

• My computer will not install the last update of security mpam-fex64 [1] .exe. I have__Windows 7 Home premium X 64 based PC. Does anyone have any suggestions?

  My computer will not install the last update of security mpam-fex64 [1] .exe.  I have
  Windows 7 home premium, X 64 based PC.  Does anyone have any suggestions?  Windows gives me the message that the update failed.  I get the error 66 has code.

  Hello sajanclt,

  It is an update of the Forefront client. I suggest you post in the following Forefront Client Forum.
  http://social.technet.Microsoft.com/forums/en-us/category/forefront

  They will be better able to help you.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• Someone at - it install the last update to Acrobat DC and shared commenting on the questions?

  Just installed the latest version of Acrobat DC. Failed to send a document to the shared comments. Get the error "failed to create shared folder.

  Hi Christa, Mike, all,.

  Today we released a hotfix that resolves this problem shared his comments that was recently introduced. If you're not already updated to the latest patch, simply open Acrobat and visit help > check for updates to apply this hotfix.

  More details about this release and bug fixes is available here: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-june-02-2016.html

  Please give it a try and let us know.

  Thank you

  -ashu

• E270 freeze when refreshing, redefinition and install the last firmaware v2 and nothing

  Hello! I have a big problem, I just copied mp3 on my e270 player, as I have done all the time in months past, but this time everhing want badly... Updated database and reset... databases update and reset... like that, impossible to stop, just to be able to and the same thing happened when I restart, then I just read on the way to reset it with the lock and hold the recording and the power , goodddd, I saw a thread of the text, version 03 o something like that, then I saw for a Player V2 it should say 03, well, I download the firmware for the V2 and extract it on the drive of 16Meg that is appeared in my computer, and then disconnected it and the player says something like COPY ROM and nothing more happened then I turned off the player and tried to restart it, but it does not, restart it just doesn't turn on at all... He's dead? What can I do? is it possible to reset as a new? don't forget the music he have in it, I copy everything... hope you can help... Thank you very much!!! Steve

  Now I TAPED! with a lot of work, I founded the whole thing to do as a new... I just make a simple guide, I think it can be useful for many people, if they do not know LINUX.

  If the rom is corrupt or you did something wrong whith the flashing rom.

  you have to use LINUX, I use UBUNTU 8.10 Intrepid, if you are a windows user, you can download it.

  Here I give you a few options, the last one is to download the CD, but you can visit the Web site and select a download location.

  Site of Ubuntu:
  http://www.Ubuntu.com

  Direct download of this CD:
  http://less.Cogeco.NET/Ubuntu-releases/intrepid/Ubuntu-8.10-desktop-i386.ISO

  Burn it to a CD.

  Restart your computer with UBUNTU inside and boot from the CD.

  You can switch to another language and change the keyboard before you begin, use the first option to start, it will not install anything and nothing changes nothing in your system.

  you need to open some windows, don't close them until you finish the process, you will have to play from one to the other, just to see the bottom of the screen where are the windows list.

  go to APPLICATIONS/accessories/Terminal
  type in the terminal:
  sudo knew

  at this point, you will be the master of your system.

  Open a file browser of your system, where Firefox will put the files you downloaded.
  go to PLACE/DESKTOP

  Open the FIREFOX web browser
  go to APPLICATIONS/INTERNET/FIREFOX

  you need last rom:
  DOWNLOAD:
  http://mp3support.SanDisk.com/firmware/E200/e200v101.02.24A.zip

  go to the file browser, right-click, click on the downloaded zip file and select EXTRACT HERE.
  Extract in its own directory (we need to create a directory named: e200v101.02.24a)

  go to Firefox
  DOWNLOAD:
  http://Daniel.haxx.se/Sansa/e200tool/I2C-E280.bin

  Go to the file Explorer, select the bin file and put it in the same directory (e200v101.02.24a):

  in this directory (e200v101.02.24a), simply create a file with nothing in it,
  Click with the right button and select CREATE NEW FILE DOCUMENT/EMPTY and name:
  Sansa.fmt

  go to Firefox
  Download the e200tool and save it in the same directory (e200v101.02.24a).
  http://Daniel.haxx.se/Sansa/e200tool/e200tool

  Go to the file Explorer, select the e200tool file and put it in the same directory (e200v101.02.24a)

  in the end, you should have this directory (e200v101.02.24a):
  BL_SD_boardSupportSD.ROM
  e200tool
  I2C - e280.bin
  PP5022.MI4
  Sansa.fmt

  go to the TERMINAL (you must take care of the CASE, upper and lower are different under linux)
  NOTE: you can press on it were you (TAB key) to complete the file name or to see a list of files.
  type (depends on your language, can be desktop, desktop, etc.):
  CD Desktop
  ls-l

  You should see something like this and other files:
  drwxr-xr-x 2 steve steve 4096 2009-01-01 10:02 e200v101.02.24a

  If you have this directory, go inside, otherwise, stay there.

  to go inside, type:

  CD e200v101.02.24a

  now, to pass us...

  with the sansa
  put on hold (LOCK LOCK switch),
  Press and hold the (down arrow) button for 5 seconds pass in Factory mode
  Connect the sansa to the USB port of your computer, the wheel turns again now.
  leave the button
  Press and hold the rec button

  in the TERMINAL, type:
  sudo. / e200tool init
  sudo. / e200tool i2cprogram i2c - e280.bin

  Disconnect the Sansa
  Power the power button off, holding 20 seconds
  On mode factory
  connect to the computer usb

  in the TERMINAL, type:
  sudo. / e200tool recover BL_SD_boardSupportSD.rom

  Unplug and restart the Sansa player in manufacturing modeholding the REC button, connect it to the USB, you should now have the 16 MB drive in a new file browser. At this point, the player to show something like:
  Lun0 locked
  Lun0 unlocked
  and he repeats a lot of time...

  Open the first FILE BROWSER,
  Select the 3 files with the CTRL key and click with the mouse, go to the EDIT menu and select COPY.
  Http://mp3support.sandisk.com/firmware/e200/e200v101.02.24a.zip BL_SD_boardSupportSD.ROM
  PP5022.MI4
  Sansa.fmt

  go to the other EXPLORER of FILES with the open 16 MB disk.
  now simply copy the 3 files on the 16 MB drive:
  go to the EDIT menu and select PASTE

  Click the icon of the COMPUTER a high Center of the browser, and with the right button of the mouse, select the 16 MB drive, in the menu that appears, select REMOVE.

  Remove disk 16 MB of your computer, wait for the confirmation to take it apart and disconnect the Sansa.

  put the button of BLOCKING (LOCK) in the unlock position, turn off the SANSA pressed the button to power 20 seconds if necessary, turn it on and it will report formatting the SANSa as a new one, erasing everything in it and you will be able to use it as the first time.

  NOTE: I tried everything first without the sansa.fmt to save all files inside, but he ran like before with the problem, and then I had to format.

  Hope it may help someone in the future, thank you all for your help and all who have written something on how to restore the Sansa e200 series V1 (e270 in my case).

  Steve

• Impossible to install the last Flash - failure to initialize drive

  From what I've seen here and on Google there are serious problems with your latest version.

  Most of them before 10, 3.xxxxxxxxxx (later) installed perfectly, but later we won't.

  I am running Win XP Pro and have tried everything, including the uninstall of the previous version of work.  The operation has failed and I had to do a system restore in the short term to at least find a version that will show videos of You Tube.

  I am however getting tired of all these reviews on my Flash Player is outdated.

  Adobe should not launch a product that is not yet installed.

  Yes to hundreds of thousands of us have the same problem.

  Just Google 'failed to initialize' and see the success.

  Well well outside this forum.

  PLEASE give us market orders step by step to solve this problem.

  Or update the version.  I can't even quote the version number because it has disappeared from my download folder after the last attempt failed.

  Thank you

  You can try to download and install installers located in this FAQ post?

  Where can I find direct downloads of Flash Player for Windows or Macintosh?

  Thank you

  Chris

• Trying to install the last download, my Mac application if I want to replace firefox with a version more OLD - have to - I do this?

  Firefox has informed me that he had downloaded an update. When I tried to install it, my iMac asked me if I wanted to replace an OLDER version of firefox. It was not not clear to me why he asked this. If this download is an updated version, why is detected by my computer as an "older version". ? And should I install? I can choose to replace the 'new' version, or keep both. What is the best? (Without unnecessarily using extra space).

  Thank you.

  Hello phkirby, please always try to download and install firefox from the official site, do the following:

  1. download a copy of the latest http://www.mozilla.org/en-US/firefox/all.html firefox (full installer)

  2. Trash , install the current application of Firefox to do a cleaning.

  3. install the version you downloaded.

  Do not select to delete your personal data, your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks or other personal data.

  See also: Installation of Firefox on Mac

  Thank you

• Setting up my HP Officejet 6500 has more the Question: first install the disc?

  Hi all!

  I was wondering if I should install the disc that came with my HP 6500 has more printer FIRST before connecting it to the top wireless? Or connect upward wireless first before installing the drive?

  I saw somewhere where the plug & play when the connected printer caused some problems that did not accept the disc that came with the printer it seemed to replace the drive.

  Any help would be appreciated before doing anything with the hook to the top of my new printer.

  Thank you!

  If you connect the USB printer that the answer is YES.

  First run installation, during installation, you will be asked to connect the USB cable, then only, you need to connect.

  Kind regards

  Shlomi

• Install the last Firefox 14

  I've been frustrated lately with the browsing experience on TPT and realized today that its got an old version of firefox 10 installed. The latest version on the game is version 14, but is not compatible with the TPT.

  I found a link to https://wiki.mozilla.org/Mobile/Platforms/Android to install the latest version directly and it is a huge improvement. I hope this helps other people too!

  I noticed many other applications is also listed as incompatible with the TPT - for example Wednesday orange some time ago, I installed and it works fine, but now on Google plays its incompatible. Are there other reliable sources for the apks or what someone knows a way to override the verification of the compatibility of the game store?

  Edit: I just installed the beta version of aurora which is optimized for tablets of the same binding and its look really good!

  I can confirm that aurora (pre-beta Firefox) works very well. Desktop mode download the add-on Firefox "Phony." It will allow you to change on the fly user agent.

  Adblock Plus now works with all Firefox Android is also inspired. It's great

• KB2619340 and KB2596843 fails to install. I installed the last two Windows updates repeatedly, but they do not have to install correctly.

  Original title: KB2619340 fails to install.

  I installed the two recent Windows updates, the KB2619340 and the KB2596843 several times, but they do not have to install correctly.  I am running WinXP SP3.  Anyone know why?

  Hello

  You receive an error message? If so, then post back the exact error message.

  Step 1: Run the following article fixit tool and check.

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Step 2: Download updates from the Microsoft Download Center and install it.

  http://www.Microsoft.com/download/en/details.aspx?ID=28469

  http://www.Microsoft.com/download/en/details.aspx?ID=28530

  For more information about updates:

  MS11-092: Description of the update of security for Windows XP Edition Media Center 2005: 13 December 2011
  http://support.Microsoft.com/kb/2619340

  MS11-094: Description of the update of security for the Microsoft Office for Word and Excel Compatibility Pack file PowerPoint 2007: 13 Formats December 2011
  http://support.Microsoft.com/kb/2596843

• OfficeJet Pro 8625: Question of installing the printer

  I bought a Officejet Pro 8625. It included an accessory "duplex unit". What I have to install the duplexer (which automatically make double-sided printing) if I want to do double sided prints for certain documents only?

  Hello

  You must install the duplex module because it is part of the paper for the printer path.

  You can enable or disable the use of the printer driver the duplexer by changing the print on the both sides option in the driver.

  Kind regards

  Shlomi

• Impossible to install the last Lr update

  I'm in the United Kingdom. I got Lr since December 2013 and have always been able to install updates successfully. However, I can not install the newest one. I do not get redirected to the usual update page. Instead, I am redirected to a page to sell USA Lightroom. Why is this happening?

  I use the second of my three licenses that I had to reinstall Lr after a laptop rebuild in February this year, but I don't think it should affect my ability to download updates.

  It offers 6 LR, which is not a free upgrade, with the exception of the subscribers to the CC cloud.

  If you have a standalone license, so you need this update.

  The latest version of LR 5 is 5.7.1 and you can download it here if you are still on an old version: Windows, Mac

  Buy the upgrade go to page from adobe UK. At the bottom of the selected products, scroll down to LR, click on buy and select full upgrade instead of the version.