HP dv6 - 6033cl webcam not detected. Is there a driver?

Similar Questions

• Pavilion G7 webcam not detected.

  Hello, I have a G7-2051SA Pavilion on W7 64-bit and webcam does not work. I have the "Cyberlink Youcam" which, once the software is installed, I run, he "No webcam detected". Skype does not detect it either. I've updated the latest drivers and using tune has conducted an audit and update PC with all relevant software but I still get the error. I can't see a FN + option key or any which icon on one of the 'f' keys to allow.

  Any ideas please?

  Hello jerrydoco.  I understand that you get the error "webcam not detected."

  Recently, I made a post on solutions for this error.  Please take a look here and try to proceed as I pointed out.

  I hope it's useful and I hope you have a nice day!

• Inspiron 1525 integrated webcam not detected when the laptop is open, but works when it is closed

  I see that the webcam works (blue light is on I can open less then to halfway and see the desktop and a part of the computer in photo. then open more than half and get error webcam not detected.)

  Help please

  Hello

  Check with Dell technical support, online documentation and drivers and their known forums
  problems and solutions.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  -------------------------

  Help generic camera:

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Sony vaio webcam not detected sve15113enb... is this a hardware problem? SOS please help

  Sony vaio webcam not detected sve15113enb... is this a hardware problem? SOS please help

  the imaging device is not on the list of the Device Manager... so I could not uninstall and reinstall the driver for the webcam.

  Help, please.

  Thank you.

  Hi NIKSY2K2,

  Please try to reinstall the Webcam Companion software by using the button help rebuild drivers for the camera.

  Nick-

• Satellite P10 304 BIOS does not detect HARD and CDROM drive

  My HDD p10-304 has recently failed.
  I bought a new 60 GB western digital 2.5 drive "and installed today.

  At startup, the BIOS does not detect the drive, but also, it does not detect the CD-ROM drive.
  This makes me think that maybe it's not the player after all, maybe the onboard IDE / motherboard.

  I'm kinda stuck, so it's a new drive should work fine, and I have no way to test the motherboard.

  The only difference is that the insulation on the original drive sleeve should be reduced by half.
  The bit important (low, where the circuits would otherwise affect metal) is always there, it is the
  Few albums I had to remove but that should be no problem.

  Someone at - it suggestions?

  Thank you, Stu.

  Hello

  What happens if the HARD drive is not connected to the motherboard? The BIOS recognize the CD/DVD drive correctly?

  You bought the HARD drive compatible? To my knowledge the Mobile supports a HARD drive with interface IDE (ATA-5) increased.

  But as you said possibly the motherboard failures and he would be advised to contact the technician during a particular test

• THE ATTENTION! Has not detected one or more drives during POST

  I have a desktop T7400.

  during post, I get this error:

  "WARNING!" Has not detected one or more drives during POST

  Press F1 to continue... »

  I press F1 and it starts up fine, but I have to stop this message from appearing every time that I turn it on.

  I have 1 CD-ROM and 2 sata hardrives on the system.

  I need help please.

  Thank you

  Disable the option 1 SATA in the bios and save the settings. There is nothing connected to the sata port 1.

• Windows does not detect my cd-rom drive in 7 edition, can't Reinstall driver, help.

  Windows does not detect my cd-rom drive in 7 edition, can't Reinstall driver, help.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

• Satellite A300 PSAG4A: Webcam not detected in Device Manager

  I have a Toshiba Satellite A300 PSAG4A 02L00M with Vista Home Premium 64-bit.
  The webcam is not working and it is not detected in Device Manager.
  When I install the Chicony camera drivers, I get the "Webcam driver open fail. Error message.

  The fact that I can't see the Webcam in Device Manager tells me that there may be a hardware failure.
  However, I hope that this is a setting that I can fix myself.

  I had restored the laptop to factory also and I've updated the bios.
  I tried to uninstall all the USB controllers and reboot the PC.

  Is there something I can do?
  It's maybe a software problem?
  There may be a setting?

  Best way to test the operation of the equipment is to check with the factory settings installation operating system with the Toshiba recovery image. As I see that you have done this already.

  So if cam still doesn't work properly, I fear that there is a problem with the hardware.
  It cannot be matter of software because the recovery image contains the driver for the cam.

• My computer says webcam not detected

  I have a HP computer and I when I try to use the downloaded client webcam with my computer, CyberlinkYouCam, he says that the webcam is not detected. I went into the Device Manager screen to find it under imaging devices, but there is nothing there. I scanned for a new hard drive, downloaded the new software YouCam, but I don't know what else to do. It does not anywhere what the pilot is supposed to be, but I guess it comes to YouCam. I read a lot of questions but nothing says what happens if you can't find what you did driver, or if it does not work. It's a built-in camera.

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  1. What is the model of the CyberlinkYouCam number?
  2. do you get an error message?

  When you install the Microsoft LifeCam software, and then you plug the LifeCam hardware, the LifeCam hardware is not detected. In addition, in Device Manager, the properties for the LifeCam entry display one of the following codes. I suggest you try the steps from the following links and see if that helps.

  Troubleshoot failures to find the new LifeCam hardware
  https://support.Microsoft.com/en-us/KB/929087

  Don't troubleshoot bad or no video or problems to start the LifeCam software
  https://support.Microsoft.com/en-us/KB/933310

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/)

  Post us the results after trying the steps above.

• New Pavilion dv7, HP TrueVision HD webcam not detected

  Just bought my new Pavilion dv7, and when I run the Cam software, it tells me that my HP TrueVision HD webcam is not detected. I tried this for a few days, at a point when I was trying to play with the settings you Cam, webcam light on for aprox. 2 seconds and then died again, since then, it won't let me even in the settings of YouCam.

  Right now I am more and more convinced that it is because of my laptop being assembled outside the United States. Need a fix for it immediately.

  Hi guys,.

  I had the same problem with a HP Pavilion dv7-6e22b. I read on a short cable inside the screen.
  I found the post on the way in which the display is connected. It's an older model but I was curious to know how to remove the cover of the machine. It contains 2 screws (that I didn't have to remove to access the camera) just be causious does not break the bevel.

  http://www.insidemylaptop.com/remove-LCD-screen-inverter-Board-HP-Pavilion-dv7-notebook/

  It is an older model in the new model, the connector of the webcam is located directly under the lens of the webcam itself.
  I pressed connector you slightly. And suddenly I hear a USB all OFA linking sound. After that my device manager showed a "device-image", and the software work directly.

  I jump it will solve your problems. I say read all messages and do not find a solution to the driver or software and after seeing the connector, I think it's an effort of poor deisgn by using short cables and small connectors.

  good luck to all!

• Webcam not detected on HP w2448hc

  I recently purchased a HP w2448hc monitor with integrated webcam and installed the driver, Cyberlink YouCam and HP My Display from the CD (and restarted the PC, of course). In Device Manager, the "Imaging Devices" tab is absent, indicating that the webcam is not installed at all.

  I appreciate any advice on how to get installed it.

  Thank you very much

  Vincent

  OS: Vista x 86 Home Premium SP1

  GPU: nVidia 9600GS

  TV tuner: AVerMedia H789 PCI - E Hybrid DVB - T

  Monitor connected to the PC via HDMI

  NOTE: USB between the monitor and PC connectivity is necessary for the webcam to exploit.

  Sorry for not RTFM. There is no need to go HDMI. Thanks for responding.

• When I try to use my webcam in my hp laptop it reads this "no webcam not detected, try plugging your webcam" I can't connect the webcam if it is installed. What should I do?

  It is the cyberlink youcam is not working. He said "no webcam detected, try plugging your webcam. If you use a camera to make sure that its on. "Also my microphone does not work.

  Hi Samson,.

  1. What is the model of the webcam number?
  2. did you make any changes to the computer before the show took place?

  Method 1
  I suggest you to run the hardware and devices troubleshooter.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2
  I suggest to update the drivers for the webcam and the microphone provided free of charge by manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information:
  See to believe
  http://Windows.Microsoft.com/en-us/Windows7/seeing-is-believing-use-a-webcam-to-bring-your-Instant-Messaging-to-life

• built-in webcam not detected on the XPS 17 (L702X)

  8.1 Windows 64-bit, the built-in webcam does not appear in Device Manager. Any software that uses webcams does not detect the webcam. He worked until recently. Drivers & downloads in support Dell offers no help because no driver for the webcam. It seems to be a bit stupid because he recommended me to install some things already installed. Or even a few years nVidia graphics card controllers! 'My Dell' application does not offer the posibility to test the webcam, just the microphone. Therefore, none of the solutions I've read here are of no help.

  fjmv,

  Recently install you / reinstall the operating system? If so, have you installed the Dell System Software (if applicable) and the first chipset drivers? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

  Windows 7/8 is supposed to provide the drivers of webcam for most Dell computers. If you system needs webcam drivers, go in driver downloads & enter your service tag, and then select your operating system. If your system is in need of drivers for the webcam, they will appear under entry.

  (Windows 8) How to make the webcam work with the help of this youtube. You must open the firstcamera app, and then click settings in the charm bar to see where you can give the app permission to use the webcam.

  Try to read...

  Troubleshoot the Dell Webcam and the Dell Webcam Central software

  You can try this file, also known as the Dell Webcam Central.

  Create a new unrestricted user account and try the webcam. The webcam worked?

  If Yes, sign out and sign back in to your account and try the webcam. The webcam worked?

  If not, then the webcam is detached from the motherboard, usually close to the webcam

  Rick

• Webcam and audio mixed, webcam not detected

  My webcam does not work.  My audio is labeled as my webcam.  My webcam is not detected.  Thank you.

  My webcam does not work.  My audio is labeled as my webcam.  My webcam is not detected.  Thank you.

  Download and install the application of webcam Webcam driver years.
  You need to visit the manufacturer's Web site to download and install it.

• I have a video camara digital Panasonic NV - GS1, Windows Movie Maker 5.1 SP3 to Windows XP 5.1, do not see, is there a driver?

  I have a Digital video camara Panasonic NV - GS1, Windows Movie Maker 5.1 SP3 and Windows XP 5.1 and firewire.

  The WMovieMaker and Windows XP cannot see or detect the hardware, is there a driver to install for this camcorder digital panasonic?

  Thank you.

  Paula

  Hello

  Thank you for your response.

  1. what exactly happens when you insert the device?

  2. you get any error message?

  3. other USB devices work fine on the computer?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Try also to update the latest drivers for your USB using the link below.

  How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

  Method 3: Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/?kbid=310575

  Method 4: Select the exact model of the device and check if all the drivers are available on the manufacturer's Web site.

  http://shop.Panasonic.com/support/?sc_mc=vanity_support_11112011

  Hope this information is useful.