Question on performance when you are adding a second GPU card

Similar Questions

• Internet goes when you are connected to wifi

  Bought an iMac on eBay this week, works fine apart from a problem I encounter with internet stall, which really starts to get boring!

  It's an iMac, mid-2011, with OS X el Capitan 10.11.3 installed and put to update to the most recent update.

  The question...

  When you are connected to our home network (Sky Broadband) I get internet access for 5 minutes for an hour then stop him internet but the wifi is connected. At this point if I check all other computers/phones/tablets on the network that they are all still connected to the internet with absolutely no problem.

  The temporary solution...

  If I disable the wifi on my iMac and then back on again once it reconnects immediately and internet works fine still a time - until it stops!

  What I tried...

  Restart the mac repeatedly

  Restarted the router again

  In network settings, advanced on the mac, I renewed the DHCP lease (loads of times - note it always seems to come back with exactly the same ip address - I guess it's good?), updated the DNS (last post I read said to use 2.4.4.2 so am currently on that), tried to manually set the MTU to 1453, I deleted all the other networks stored outside my home network Too much.

  Does anyone have any suggestions please for all messages that have worked for them, or things that I could try?

  Thanks a lot for your help

  Joe

  Did you erase the internal drive and install OS X yourself? Did you run the hardware test? If this isn't the case, please do both.

• the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I am disconnected and then reconnected___

  the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.

  I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access

  added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?

  Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam

  Visit this link:
  http://support.Microsoft.com/kb/936213

• Often, when you are working on several programs, a message button in my taskbar - REMINDER. At the same time my system seems to slow down. I have the possibility of closing the Snooze button every time, but it's a pain. How can I disable this?

  Can not find the topic in the manuals.
  System has been reinstalled after the total loss of the hard drive.
  Use HP recovery discs.
  This feature was not present on the original version of VISTA.

  Hi Starkt,

  1. You have all software reminder on your computer?
  2. What is the exact message?
  3. Who is the manufacturer of your computer?
  4. What edition of vista is installed on your computer?

  You can place your computer in a clean boot to verify which application is causing the problem.

  1. click on Start
  2. type msconfig in the Search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  1. in the general tab, click Selective startup.
  2. under Selective startup, clear the Load Startup items check box.
  3. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  4. click on OK.
  5. When you are prompted, click restart.
  6. after the computer starts, check if the problem still persists.

  After you identify which application is causing the problem, then you may need to uninstall and reinstall the latest version of the application.

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use
  http://support.Microsoft.com/kb/331796

  NOTE: TURN ON YOUR COMPUTER TO A NORMAL STARTUP AFTER TRYING THE ABOVE STEPS

  Try and let us know the answer.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• should I turn the printer off when you are not using it?

  you just buy new printer - HP envy 5530 - need to know if I need put it off when you are not using it or if it passes in mode "sleep"?  other printers I had went to sleep mode however cannot locate this answer in the FAQ - like entry - thanks ~ ) husband

  Welcome to the mgchandler forums,

  I saw your post on want to know if you should be powered down the printer or if it won't fall in the mode 'sleep'. My best advice would be to turn off the printer by the power button if it will not be used for a period of time, for example during the night. Regards the mode "standby", the printer goes into standby after 5, 10 or 15 minutes of inactivity.

  • To change the settings for sleep mode, go to the front screen of the printer and press settings (wrench)
  • Contact preferences
  • Press the arrow down and on Standby Mode when you see
  • You can now change the time of mode 5 to 10 to 15 minutes before

  User - Guide Page 93 + 94 for Info Sleep Mode

  I hope I helped answer your question!

  Have a great Tuesday

• How upgrading to creative cloud occurs when you are already a member of Typekit signed?

  Hello everyone. I have a signature for Typekit. When I buy a creative cloud the price I paid is reduced? How upgrading to creative cloud occurs when you are already a member of Typekit signed?

  Thank you

  Hi rogeriovelloso,

  This page explains how your Typekit account can change if you get a subscription to creative cloud:

  o-a-new-creative-cloud-subscription http://help.Typekit.com/Customer/Portal/Articles/529513-Link-an-existing-Typekit-Account-t

  Please let me know if you have any other questions, here or at [email protected]!  Best,

  -liz

  Typekit Support

• Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes February 29, 2016

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.  During the process I started to have some warning of our AT & T account that I approach the limit of our data plan, then in quick succession, only warnings, said I've reached the limit and then passed in the data, limit charges.  At the time it was done, I had accumulated more than 2 gigabytes of additional data charges.

  Until that point, I was very pleased with the device and confident in the ability to use Wifi and data.  Due to this incident, I became very suspicious of the camera and the huge potential for data overcharges. It is extremely disconcerting as it happened while it is directly connected to the internet using my computer at home.

  Please note that, in the episode my ISP and the computer is remained connected to the WEB with no sign of connectivity issues.

  Someone at - he had a similar experience and understand what went wrong?

  Thanks for your support,

  Jerry

  JerrolK wrote:

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.

  You have chosen the option of direct download, you have received a message of warning from AT & T about it yet.

  He did what you asked it to do.

• When you are working in photoshop, a message telling me that I need to delete my "scratch disk" appears. What and how can I do this?

  When you are working in photoshop, a message telling me that I need to delete my "scratch disk" appears. What and how can I do this?

  Hello

  You should check with Support Adobe and their Forums.

  Adobe support
  http://www.Adobe.com/support/

  PhotoShop - Forums
  http://forums.Adobe.com/community/Photoshop

  I hope this helps.

• I wrote a batch file in Notepad using win XP, it works, but when you are finished, the black screen is still there. How can I automatically have the black screen disappear.

  I wrote a batch file in Notepad using win XP, it works, but when you are finished, the black screen is still there.    How can I automatically have the black screen disappear.

  Hello

  Use it as the last command in the file beats.

  OUTPUT

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error - installation of programs: Please do not power off your computer. Installation close this window when you are finished.

  Original title: need help for reinstalling Windows XP.

  I am selling my computer, so I wanted to wipe and use my CD resource Dell 4 to put the computer back to factory settings. I got through the four discs and Windows XP starts (House) as usual, but then appears a screen that says:

  "Installation of programs: Please do not power off your computer." Installation closes this window when you are finished' and it alternates between this message and: "this process could take up to 30 minutes to be completed."
  Flashed it between these two screens for over 48 hours now... As to what he is hanging on, I am at a loss? I have to restart it once (about 26 hours on the right) and she appeared with this same screen once again. Help, please!

  Hi Joesmommy99,

  If you have the Windows XP installation disk, you can restart the computer and then try to format & install Windows XP again and check if the problem persists.

  How to install or upgrade to Windows XP

  Reference: Install Windows XP

  Hope the helps of information.

  Please post back and we do know.

• When you are working in photoshop, a message box appears telling me I need to delete my "scratch disk". What is this and how can I do this?

  When you are working in photoshop, a message box appears telling me I need to delete my "scratch disk". What is this and how can I do this?

  Look in photoshop preferences

• Lose connectivity to the virtual computer on your laptop when you are disconnected from the network

  Hello

  I have a laptop with a Windows 2003 virtual machine (VPC 2007) with IIS 6.0, hosting a Web site for testing and development.

  Using Dreamweaver and navigation on the site of the XP laptop (VM host) works very well when the network cable is connected.

  Interestingly, this will work, but VERY slowly when plugged into an empty network switch.

  The virtual machine has the laptop computer adapter selected to work. I tried to use a loopback cable and it did not work. I also tried to add the MS Loopback Adapter but not had any luck with that when you set the virtual to use.

  Please can I have some suggestions, laptop user wants to work on this site with the virtual machine when you are away a network connection.

  Thank you

  Tom

  Hello

  Try a static IP on the same subnet to re-branded to map of loop back on the virtual machine and the host.

  Make sure that the subnet is allowed through the firewall.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• When you are logged as long as admin cannot delete movemediaplayer.

  original title: need open administrator rights.

  When you are logged as long as admin cannot delete movemediaplayer.

  When you are logged as long as admin cannot delete movemediaplayer.

  1. This is the forum for Vista. So I have to assume that you are using Vista.

  2. There are Windows Movie maker or Windows Media Player. Can you talk?

  3. Windows Media Player comes with Vista, it may NOT be "deleted". He lives and dies with the system.

  Now, if you care to, please elaborate more before what is the problem and maybe one of us will be able to help. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Is there a way to display the coordinates of the mouse cursor when you are working in MS Win7 Works?

  original title: coordinates of the cursor

  Is there a way to display the coordinates of the mouse cursor when you are working in MS Win7 Works?

  Bob,

  You may need to use third-party programs to make...

  You can locate the mouse by using the steps in the link

  http://www.tipsnext.com/operating-system/how-to-quickly-locate-a-lost-mouse-pointer-on-Windows-XP-7/

• The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

  The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

  A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win