Question on the iSCSI initiators and several NIC

Similar Questions

• question on the layer effects and filters - Jews Becker

  Hello

  I have a question about the layer effects and filters

  first is there a way to layer effects in flash (as in photoshop 'coup' "outter glow" etc...)

  so it is a kind of plug-ins to special effects - perhaps with particles or pretty effects that I can buy

  Thank you very much!

  (as you may have guessed I'm very new at this and appreciate all the advice I can get!)

  -Jews Becker

  You won't find anything exactly like filters in Photoshop for use in Flash. There are filters in Flash. They are available at the bottom of the Properties window for an object MovieClip or button on the stage. Alternatively, you can apply and animate a filter in Actionscript. There is a good third-party developer, http://www.greensock.com, where you can find a few effects tools very useful. Most are free.

• How to lock the scroll bar and several tabs to prevent them from scrolling erratically

  I have upgraded to Windows 10.
  Now the fireplace (Yes, it's the latest version) scrolls top down in erratic Web pages.
  I can't control the right scroll bar.
  Even after clicking on it or by moving up and down, either with the use of the touchpad, arrows and arrows at the top / below the scroll bar itself, it moves just everywhere anywhere on the page.
  The same thing occurs when multiple tabs are open. They scroll left and right erratically.
  Help! It's the most boring, frustrating and time consuming.
  I have already searched several forums and blogs, disabled the auto-scrolling and scrolling soft, all to nothing will do.

  On my system, the mouse pad has a mind of its own. So I opened it from the
  settings and OD "disable when mouse available.» No problem now.

• FPGA reference questions between the station development and execution? 63195 error code

  I will do my best to describe the problem, I was see.  Note, I tried a few other messages that kind of touch on my problems, but they never seem to have a definitive solution.

  Background-

  I have 3 screws:

  VI 1) opens / runs the bitfile FPGA reference and stores the reference to a global file so that I can call the reference of other screws I need to do this as opposed to the opening of a new reference because I use the FPGA for digital communications and it adds about 100 ms to to open a new reference whenever I need to read/write in the target FPGA to host (100 ms are long in the) digital world!).  Some people use Shift Registers.  I finally called my whole army FPGA screws of TestStand to run a test automated, so it was easier to break up of my functions for open/close/read/write.

  VI 2) called the global reference of the file for FPGA, then going to a read/write node to change the settings of the target, then passes the reference out of the node back to the global reference of the file read/writable

  VI 3) calls close reference FPGA and the function is passed the global reference of the file.

  Question-

  I understand not why this method works fine when I run either of TestStand with station options defined for the development (not running) mode or when I open VI which calls these 3 screws individually in sequential order but IS NOT working when I try to run these screws individually (Run VI 1 - open-> write Ref to the global reference of the file-> Run VI 2 - read global file reference-> playback control function / writing-> error-63195) or when I have run in the same sequence TestStand but together with station for execution options.  Maybe I need to change the TestStand sequence to load all the modules at startup?

  Why the reference becomes lost when global failover between development and execution and why labview cannot drop keep the reference stored?  Is there a work around?

  Finally found a solution.  I do not understand why it is necessary during the reading of the FPGA and not what writing (in fact I do not understand why it worked at all) but I ended up changing the properties of the step in my TestStand sequence for the step calling my DTL_READ.vi to be properties-> Run Options-> Unload Option-> "Unload after executing the step.  That seemed to do the trick to get my test TestStand sequence to work in runtime.

  I still don't understand why this was not required when you run the same sequence in the design environment and why it is not when I call my DTL_WRITE.vi.

  The DTL_READ.vi and the DTL_WRITE.vi pass the parameter labveiw global.vi 'Reference FPGA VI"of a node in read/write.  I don't know if the root of the problem is in my host TestStand and LabView FPGA VI...

  Thanks for all suggestions from you guys!  I'm happy I work but I am still confused by the solution.

• Questions after the BIOS updates and driver - place 11 pro

  Hi all

  I am owner of a place of reference dell 11 7140 model 10 64-bit windows running and about 5 days ago I installed the latest drivers and the latest version of the BIOS using the automatic detection of the dell support page www.dell.com/.../drivers printer driver

  Since then, I met the two following questions:

  1: the automatic detection of the dell driver no longer works

  2: the system does not detect when a headset is connected, the audio always comes out the speakers Tablet - I reinstalled the latest drivers, but made no difference

  I wonder if anyone else has experienced those problems and what measures have you taken to solve problems.

  Thank you

  I managed to solve the problem with the audio: it was caused by an incorrect realtek driver installatiion, for some reason any 'Realtek Audio Manager' was not loaded when you start and that's why the system doesn't detect the status of the audio input jack.

  Always have the question of the automatic recognition of the driver, but at least I have a tablet of new work!

• Question about the memory consumed and active

  I have esx4.1 on three dl585 running. I have about 100 active vm running, and I have a small question.

  My vm is all 2008 r2 datacenter and I gave them 1 cpu and 4 GB of ram. When I recover a single virtual machine and look at the summary page, I see the bones of memory consumed host 4075 mb and the active guest memory 81 MB operating system. My question is can I reduce the host cunsumed memory to 2 GB without noticing a difference within the virtual machine?

  It looks like you can.   To be absolutely sure that you'd need monitor assets long enough to have a good idea of what the average is and what are the tops.

• Quick question on the button symbols and simple roll overs

  I'm prototyping bee my last several websites in Fireworks in front of her a coding in Dreamweaver. I see two ways to accomplish the same thing and wonder if there is any advantage to one or if it's just a user preference of how to do it.

  When you create a single roll on it seems that this can be done in 2 ways:

  (1) create a slice around the image, and then, in the range, select creatte a behavior simple reversal.

  (2) convert the image into a button symbol and then change the symbol to add more force.

  Both are simple ways to do so. There their advantage to one or the other?

  Fireworks is more powerful, while many think. Not always the best code bit large layout and comping tool!. While you work more with web pages, you can learn how to make CSS based menus in Dreamweaver :-)

• Questions about the automatic height and display on Firefox

  I'm working on a website and I homepage (with numbers).
  
  (1) the Interior wrapper is a gradient and has a height of repetition and automatic. They like to look him up and black bar at the bottom of the screen with the red bar. The problem is that it is set to repeat itself so if someone changes the size of the font will display exactly the same thing. How to look the same? All ideas welcome.
  
  (2) in addition, when you hit more police in the area of text at the bottom of the rounded corners is adopted at a max height, but the text flows into the area, I can prevent this?
  
  (3) in addition, if you look at it in firefox, it has a white bar at the top. I don't know that I have a bit of coding there that is incorrrect and the cause, any ideas?
  
  Thanks for all the ideas, attached is my link to the page. Please be nice because this is my second web site.
  
  http://www.lotusvalleydesigns.com/meixnerconstruction/safety.html

  .oO (new dreamweaver)

  > Thank you very much for the helpful tips. I am a beginner and
  > enjoy all the tips I can get. I'll give these changes a
  > go and see where I end up. I'm sure that I'll be back!

  You are welcome.

  And just ask what you want to know.

  Micha

• Question about the game database and the UNICODE character

  Hello
  
  I have to configure a database for an IBM product where is a requirement:
  "Databases must be created using the UNICODE database and National characters as UTF8 games, AL32UTF8 or AL16UTF16 or."
  
  My current database character is: WE8MSWIN1252. Change the current database character set is not an option, so I have to create a new db for this requirement.
  
  My question is:
  (1) how to ensure that "databases must be created using the UNICODE database"?
  
  (2) to take care of character, I'll use in the database creation script:
  
  "
  create the db1 database...
  ..
  CHARACTER SET US7ASCII
  NATIONAL CHARACTER SET AL16UTF16
  .."
  who will take care of him?

  create the db1 database...
  ..
  UTF8 CHARACTER
  NATIONAL CHARACTER SET AL16UTF16

• Question about the Apple Watch and tattoos

  I think buy a Apple Watch very soon.

  I have a full sleeve (which is where I would like to wear the watch) and I wonder if it will cause problems with readings with the heart monitor since I want to use the Apple Watch for fitness training, mainly.

  I read on the page of the heart rate for the saying of Apple Watch:

  "Permanent or temporary changes to your skin, such as some tattoos, can also impact performance heart rate sensor. Ink, model and the saturation of some tattoos can block light from the sensor, making it difficult to get reliable readings. »

  There are other problems in addition to playback of heart rate on the Apple Watch for inked people that may know you?

  Thanks for your comments just to decide if this watch will really be for me before making this purchase, because I missed one for some time.

  If you are looking for, there was a very long discussion about this in the past, only shortly after the release of the Apple Watch. What I've read, it seems that the heart rate monitor is the only victim when it comes to the watch, since this is the only thing that requires the sensors to work through ink. Not all inks makes a difference, but most don't. The activity of exercise/app also uses the heart rate monitor to determine the rate for the year. You can take the time to go to the nearest Apple Store and try on the Apple Watch and see if the monitor works with your sleeve.

• Question on the recovery CD and the Vista anytime upgrade

  Hello

  I bought a toshiba laptop now a year ago, it came pre-installed with vista home premium.
  I would like to do a complete cleaning my system as its useless been lately and isn't a fact since I bought.

  It came only with - a the product recovery disc and upgrade Express windows.
  But I'm worried because if I do a recovery of product I don't have the real vista disk it SHOULD have and will not have vista on my laptop or one of the files that toshiba put on it.

  What should I do?
  What a product recovery disc actually have on it and do? What is the Windows anytime upgrade disc?

  I have been informed by microsoft and I.T. technicians everywhere that i should have a vista installation disc in the same area so the fact it came pre-installed.

  Help, please

  > It came only with - a the product recovery disc and upgrade Express windows.

  As you say you have the product recovery disc.
  This Toshiba drive contains the image of Toshiba.
  The image is a package and it contains the operating system Windows, Toshiba drivers, tools, utility and software further.

  The use of the recovery CD will fix the laptop back to the factory settings.
  So just boot from the recovery CD and follow the instructions on the screen.

  Just for info:
  The recovery CD will format the whole HARD drive, but I see that a backup is not important to you.

  See you soon

• Question about the account administrator and access

  I am logged in as administrator, but when I try to access certain programs or files that I am refused access as a limited user.

  Can anyone help?

  Jon

  Hello

  You can access files or programs by making a 'right-click' on the file/shortcut and 'left click' on 'run as administrator '. ».

  Then, the application will run wirh maximum rights and full access.

  Welcome them

• Newbie question about the firmware loading and music

  Hi all.  Firstly a bit of background.  I am a former admin of system IT I got a C240 as a gift.  I tried to remove the music from Windows Vista section of the computer where the C240 is listed as a portable device.  Now, I can't get things to work quite right.  I seem to have the 8 original songs/5 albums that come with the device.  The number has doubled to 16, and half of them cannot play.  I'm not sure I want to do with this device, but I want to clear in addition to all the current music and load my own.  I tried to download the update of the firmware and it still just waiting and never took the screen "search for updates".

  Also, I have Media Player 11 and it does not recognize the unit.  So, how do Media Player to see the device, copy music to it and delete the prepackaged songs accompanying?  Any help will be appreciated.  I don't want to choose the format from the settings menu, unless it's the way to go.  Arrest me please make any more mistakes!  Thanks in advance for help a dummie MP3!  -Victor

  OK I got when I hit reset I changed the USB to MSC settings to automatic detection.  So I reset on MSC.  Now I see the Unit 11 MP so how can I delete and add music?  Thanks for bearing with me! -Victor

• Update with the Lead feature and several lines

  I have a table such as:

  Table1:

  OrderNumber EFFECTIVE_DATE EFFECTIVE_END_DATE FileName

  123 11/5/2015-12/31/2099 File5.txt

  123, 7/11/2015-12/31/2099 File7.txt

  or it can look like:

  Table2

  OrderNumber EFFECTIVE_DATE EFFECTIVE_END_DATE FileName

  123 11/5/2015-11/7/2015 File5.txt

  123, 7/11/2015-11/9/2015 File7.txt

  123 11/9/2015-12/31/2099 File9.txt

  123 11/15/2015-12/31/2099 File15.txt

  I want to take the 2nd to the last EndDate and update with the previous value.

  So in fact, it would look like this.

  Table1:

  OrderNumber EFFECTIVE_DATE EFFECTIVE_END_DATE FileName

  123 11/5/2015-11/7/2015 File5.txt

  123, 7/11/2015-12/31/2099 File7.txt

  or

  Table2

  OrderNumber EFFECTIVE_DATE EndDate FileName

  123 11/5/2015-11/7/2015 File5.txt

  123, 7/11/2015-11/9/2015 File7.txt

  123-11/9/11/15 to 2015/2015 File9.txt

  123 11/15/2015-12/31/2099 File15.txt

  I got it work in a select statement to a single value. now I just need help it enter an UPDATE statement and update all records.

  SELECT W.EFFECTIVE_DATE, W.EFFECTIVE_END_DATE,

  NVL (LEAD (W.EFFECTIVE_DATE, 1) (ORDER implementation W.EFFECTIVE_DATE), December 31, 99 ') AS 'EFFECTIVE_DATE_NEW '.

  OF WH_ORDERS_REPORT W

  WHERE ORDERNUMBER = '10460992';

  It did not work:

  UPDATE WH_ORDERS_REPORT WH

  SET EFFECTIVE_END_DATE = (SELECT NVL (LEAD (WH2. EFFECTIVE_DATE, 1) (ORDER of WH2. (EFFECTIVE_DATE), DECEMBER 31, 99 ')

  OF WH_ORDERS_REPORT WH2

  WHERE WH. ORDERNUMBER = WH2. ORDERNUMBER)

  I appreciate your help in the creation of an update statement to do this.

  Rap, but it's working now.  I'll confirm with a few other records before I mark as correct, but what I see so far, it is beautiful, thank you!

  merge into WH_LIFELINE_ORDERS_REPORT D

  a_l'_aide_de)

  Select

  DISTINCT ORDERNUMBER,

  CURRENTSTATUSDATETIME,

  NVL (LEAD(EFFECTIVE_DATE, 1) ON (ORDERNUMBER partition

  (EFFECTIVE_DATE order), December 31, 99 ') as EFFECTIVE_END_DATE

  of WH_LIFELINE_ORDERS_REPORT

  ) S

  WE (D.ORDERNUMBER = S.ORDERNUMBER

  AND D.CURRENTSTATUSDATETIME = S.CURRENTSTATUSDATETIME

  )

  When matched then

  setting a day of set D.EFFECTIVE_END_DATE = S.EFFECTIVE_END_DATE;

• Question on the composite index and index skip scan

  Hello
  I have a confusion.
  I read the post of Burleson on the column of the composite index command (http://www.dba-oracle.com/t_composite_index_multi_column_ordering.htm) where he writes that
  
  «.. . for composite indexes the most restrictive value of the column (the column with the highest unique values) should be made first to cut down the result set in... »
  
  
  But 10g performance tuning book tells the subject INDEX SKIP SCAN:
  
  "... Index scan Skip allows a composite index that is logically divided into smaller subindex. In Dumpster
  scanning, the first column in the composite index is not specified in the query. In other words, it is ignored.
  The number of logic subindex is determined by the number of distinct values in the first column.
  
  Skip scanning is advantageous if there are few distinct values in the main column of the composite index and many distinct values in the key do not tip of the index... »
  
  If design us a composite index according to what said Burleson, then how can we take advantage of index skip scan. These two staements to oppose each other, Don't they?
  
  Can someone explain this?

  Even if you're not skip scanning, it is best to put the column with less distinct values in the main column of the index.

  If a query specifies two key as predicates of equality columns, it doesn't really matter how columns are sorted in the index.
  If a query specifies a range on a key column, it is most likely on the second column of the index.

  BTW, sometimes even a column 3 or the index of the column 4 is useful. In order to not restrict simply yourself in 2 columns. However, do not create too many clues - especially if there is overlap between the index.

  Hemant K Collette