question on the layer effects and filters - Jews Becker

Similar Questions

• I am a beginner using photoshop and I hid the layer tool and can not find a way to get it back... Please help

  I am a beginner using photoshop and I hid the layer tool and can not find a way to get it back... Please help

  

• Is it possible to get the layer, layerset and layer with status layerset...!

  Hello world!

  Is it possible to get the layer, layerset and layer with the status layerset. Because I met a big problem out of it.

  I have a single PS document which is contain the collection of layer, layer with layer games collection. I need apply the function for each layer and layers and each layer games with of layerset.

  I also tried a code, but its error getting. Please help me out of this code...

  -yajiv

  #target photoshop

  app.bringToFront ();

  level of $= 2;

  var app.activeDocument = docRef;

  Journal of the var ="";

  var x = 0;

  var n = number (docRef.layers.length) - 1;

  for (i = 0; i < n; i ++) {}

  var tm = String (docRef.layers [i]);

  var isLayer = tm.lastIndexOf ("ArtLayer");

  var isLayerSet = tm.lastIndexOf ("LayerSet");

  {if(isLayer!=-1)}

  Check_LayerStructure (DocRef.Layers [i], 'Layer');

  }

  {if(isLayerSet!=-1)}

  Check_LayerStructure (DocRef.layerSets, "LayerSets");

  x = x + 1;

  }

  }

  function Check_LayerStructure (objLayer, objflag, x) {------}

  {if(objflag=="Layer")}

  LayetStructure (objLayer, objLayer.name, BlendMode.NORMAL, 100, 100, 0, true, 'Layer');

  }

  else {if(objflag=="LayerSets")

  LayetStructure (objLayer [x] objLayer [x] .name, BlendMode.PASSTHROUGH, 100, 100, 1, true, 'together');

  m = Number (objLayer [x] .layers. Length)

  for (j = 0; j < m; j ++) {}

  var tm = String (objLayer [x] .layers [j]);

  var isLayer = tm.lastIndexOf ("ArtLayer");

  var isLayerSet = tm.lastIndexOf ("LayerSet");

  {if(isLayer!=-1)}

  Check_LayerStructure (objLayer [x]. Layers [j], 'Layer');

  }

  {if(isLayerSet!=-1)}

  Check_LayerStructure (objLayer [x] .layerSets, "LayerSets", x);

  }

  } / / Loop Layerset

  } / / I loop For

  } //Function loop

  function LayetStructure(layerRef,L,bMode,Opt,fillOpt,S,layVisible,Lref) {}

  {if(layerRef.BlendMode!=bMode)}

  If (confirm (L + Lref + "belend mode was bad...!)) \n"+"do you want to change...? »)) {

  layerRef.blendMode = bMode;

  Journal = Journal + "-" + L + Lref + "belend mode has been changed...! \n\n ";

  e = 1;

  }

  }

  {if(layerRef.Opacity!=opt)}

  If (confirm (L + Lref + ' opacity has been "+ Math.round (layerRef.opacity) +"%...! ")) \n"+"do you want to change...? »)) {

  layerRef.opacity = Opt;

  Journal = Journal + "-" + L + Lref + ' opacity was changed to 100...! \n\n ";

  e = 1;

  }

  }

  If (layerRef.fillOpacity! = fillOpt & & S == 0) {}

  If (confirm (L + Lref + ' Fill has been "+ Math.round (layerRef.fillOpacity) +"%...! ")) \n"+"do you want to change...? »)) {

  layerRef.fillOpacity = fillOpt;

  Journal = Journal + "-" + L + Lref + ' fill has been changed to 100...! \n\n ";

  e = 1;

  }

  }

  {if(layerRef.visible!=layVisible)}

  If (L + Lref + ' left eye...! ") \n"+"do you want to change...? ») {

  layerRef.visible = layVisible;

  Journal = Journal + "-" + L + Lref + ' eye was turn on...! \n\n ";

  e = 1;

  }

  }

  }

  Code of responsible for the action would naturally faster, but if you should be more comfortable with the DOM code, it could be useful to you.

  #target photoshop

  var theLayers = collectLayers (app.activeDocument, []);

  Alert (theLayers.join ("\n"));

  function to collect all the layers.

  function collectLayers (theParent, allLayers) {}

  If (! allLayers) {var allLayers = new Array}

  else {};

  the number of var theParent.layers.length = - 1;

  for (var m = number; m > = 0; m-) {}

  var theLayer = theParent.layers [m];

  apply the function of games of layers;

  If (theLayer.typename == "ArtLayer") {}

  allLayers.push ([theLayer, theLayer.blendMode, theLayer.opacity, theLayer.fillOpacity])

  }

  else {}

  allLayers = (collectLayers (theLayer, allLayers))

  This line includes layer groups;

  allLayers.push ([theLayer, theLayer.blendMode, theLayer.opacity, theLayer.fillOpacity]);

  }

  };

  return allLayers

  };

• I tried to update my Lightroom CC to get the menu effects and fog. Once I did nothing worked! No Lightroom or Photoshop I chatted with adobe online assistance and she finally got both working again but had to wipe everything and reinstall.

  I tried to update my Lightroom CC to get the menu effects and fog. Once I did nothing worked! No Lightroom or Photoshop I chatted with adobe online assistance and she finally got both working again but had to wipe everything and reinstall.  Now I sometimes have a 'demo' of Photoshop and the same version of Lightroom CC without de-haze. In addition, I can't use these programs in offline mode - I have to keep signed in Creative cloud - I don't have this problem before.  Any ideas before once more involved with a cat onlaine?  Thank you...

  Raeburn, if you get the trial version, make sure that you are connected to creative cloud. Here's what you can try.

  • Sign in to creative cloud.
  • Disconnect from the Internet.
  • Try to use Lightroom and check if you get a trial version.

  Note: Please make sure that you are not disconnected from the creative clouds.

  You can check: why I am forced to connect to CC, when I bought a stand-alone license for Lightroom 6?

• The radial and the graduated filter and filters spots do nothing but cast a shadow over the region. the settings do not work on them.

  CC in Lightroom

  27 "iMac

  Yosemite running

  just loaded CC in lightroom

  The radial and the graduated filter and filters spots do nothing but cast a shadow over the region. the settings do not work on them.

  A few suggestions

  Try to disable the GPU in preferences > performance.

  For filters, try to press O to see if it's the mask you are viewing rather than adjustments.

• How to connect to the start and the layer effect.

  I want to when I changed the start of the keyframe of layer settles with the layer using script

  I would say from here: Scripting in After Effects

  After going through here, if you have any questions, it would be better to ask the after effects Scripting forum

• Lose the layer effects when I flatten image Photoshop CC

  How can I keep my layer effects when I flatten an image or the merger of the layers?  I tried a few ways to merge: for example merge down to an empty layer, visible merger, stamping the image, the rasterization of the layers, saving in jpg format, but still lose the effect.  I can also send it to a lab to be printed with all layers intact, as it is more than 1 GB in size. I searched the net for an answer, but all suggested does not work.  Help, please.  I really need to solve this problem.  Thank you

  It seems to me that you apply tonal corrections of black and white line art, or an image with the frame of halftone (points) (or something similar).

  That won't do anything because all you have is still pure black white and pure - but it will look as it does If you look at what it is other than 100%.

  
  

  The reason why the adjustment seems to take, is that you look at a preview resampled, cached, and resampling softens the edges and introduced middle gray values.

  When you group, the adjustment is calculated on the original size. Then he "disappears", because it is actually nothing to resolve.

  I could be wrong and it's something else - but is a very common question and a good bet.

• Reduction or enlargement of the layer effects

  This situation applies to typography, I've used in a logo design.

  The element type of key is great, and I faked the chrome effect I want.

  There are other items of type in this logo, but they are smaller (by about two-thirds). Using the ' copy / Paster layer Style ' will not give the same effect when applied to the smaller type (that's what I want).

  Here's the question:

  Is there a way to achieve the same effect (in this case to the chrome), regardless of the size of the characters?

  TIA

  You can adapt this way Layer Styles - layer > layer Style > scale Effects.This dimensionnera all styles on a layer, in percentage

  So hidden that most people would never know it was there. Should probaby be as a cursor proximity for this, but some of this stufff they never get round to.

• Why I'm losing the layer effects when recording in format PDF, JPEG, etc...?

  I'm working on a poster for a school assignment in Photoshop that uses a lot of layer effects for multiple objects, including text. I'll have to save to print to PDF for my teacher, but when I do that I lose a lot of quality and some of my layer effects. I tried to save as JPEG and PNG, but they all do the same thing. I also noticed that I lose the effects when I flatten the layers that the effects are on. I need the effects because I'm giving some objects a metallic appearance. It seems that the effects that I lose are the glow inside and bevel and Emboss.

  Is there something I am doing wrong? It has nothing to do with the compression? Can someone help me understand what goes wrong so that I can save for printing?

  If it was me I would be recording in the format .psd until the end of the project and then saving it to pdf or jpg that these formats are not intended as alternatives to .psd.

  Jpg files don't support layers you will always lose them if you save in this format. PDF, however, should be ok, if configure you it correctly. When you save as pdf, make sure the layers box is checked

  

  Make sure that in the next dialog box his game up like this

  

  and finally click on compression then a lossless like zip compression. It should look like this

  

  Hope that gives you better results

  Terri

• Invert the colors in the layer text and background

  Hello

  Can someone please guide me through do reverse my position.

  Basically, I created an outline of buildings in the background using the pen tool - this part is fine. Then I had filled white buildings inside and outside with black.

  Then I have the text layer. Now, I want to have the text overlapping the two portions of the black and white of the background while being in the Middle, and the problem I am facing is I'm trying to make sense of the texts that overlaps the black area to be white and black when he rides the white area.

  So just a summary:

  Question #1: How can I go to do this inversion of color?

  Question #2: Just another question - is there a better way to create sharp backgrounds? I basically used the pen tool to create rectangular shapes, a little inclined to the buildings in the background - the area selected and filled with the foreground color, which, in my case, I chose white. I left at 0 Pixels and checked anti-aliasing when I chose the area by the way. I'll get this pattern printed on a black shirt, then I want the lines to be as sharp as possible, if someone can you please advise me if I don't do something right in the above. Kindly let me know if there are better ways to do it as well.

  I thank you all in advance and have a nice day!

  Javier

  Type white and use the Exclusion blend mode.

  

• How to make an image/object move with edge of the layer effect another?

  Hello

  
  I'm doing a video presentation of Whiteboard.

  
  What I should really do is bind the sequence .png of the arm/hand to the effect of sequential race that I applied to the layer below, as to pretend that the hand movement draws this layer (which is actually a scanned hand drawing) after masks I created with the Auto route tool.

  Obviously, I need to find a way to do it to avoid creating keyframes for each unique hand (REALISTIC) movement.

  I train after effects CC 12.2. I have a composition of 'HAND' with 7 different .png goes on loop, stop motion such as; a composition where the edge effect is applied to the design and overall composition where I would like to merge the previous two.

  Does anyone have any suggestions?

  
  Thanks in advance

  FP

  It may be possible to copy & paste the masks of illustrator and join some of them in a continuous path, however, but otherwise he must get used to the fact that there is no automated for any solution. Some things just need a tedious manual work and it's one of those things...

  Mylenium

• Why the layer effects do not work for the photos in Photoshop CC?

  Layer effects do not appear in Photoshop CC for the photos. They work very well for text, but not for any image. The layers in the image are unlocked, I've updated to Photoshop and I erased the preferences but still nothing. Any suggestions?

  Promote the selection into a new layer (Ctrl or Cmd + J to copy; CTRL or Cmd + Shift + J to cut), then try to apply the layer style.

• CS4: Does not mask the layer effects. Bug?

  If you have an image of say a person and an effect (a drop shadow maybe) and then apply a layer mask on the size of the feet, the result should be the size up anyone with a fading shadow identical to the person. That's how CS3 it.

  NOT SO, in CS4. With CS4, the layer mask not "mask" effect. So, you get dark legs, but the body is hidden.

  I'm positive, it's a bug, because I can open the bad image of CS4 CS3 AND it seems correct.

  Attached is the same file I created in CS4 (with shadow to come through transparent surface) and then he opened in CS3 (clean, no shade).

  Since you are positive it is a bug, I guess that there is no sense, which suggested that referred you to your dialog layer styles, click on the merge options panel and click layer mask hides in advanced mixing options. Bugs must be fixed by engineers, not the users, so I think that this post is a waste of your time.

• FPGA reference questions between the station development and execution? 63195 error code

  I will do my best to describe the problem, I was see.  Note, I tried a few other messages that kind of touch on my problems, but they never seem to have a definitive solution.

  Background-

  I have 3 screws:

  VI 1) opens / runs the bitfile FPGA reference and stores the reference to a global file so that I can call the reference of other screws I need to do this as opposed to the opening of a new reference because I use the FPGA for digital communications and it adds about 100 ms to to open a new reference whenever I need to read/write in the target FPGA to host (100 ms are long in the) digital world!).  Some people use Shift Registers.  I finally called my whole army FPGA screws of TestStand to run a test automated, so it was easier to break up of my functions for open/close/read/write.

  VI 2) called the global reference of the file for FPGA, then going to a read/write node to change the settings of the target, then passes the reference out of the node back to the global reference of the file read/writable

  VI 3) calls close reference FPGA and the function is passed the global reference of the file.

  Question-

  I understand not why this method works fine when I run either of TestStand with station options defined for the development (not running) mode or when I open VI which calls these 3 screws individually in sequential order but IS NOT working when I try to run these screws individually (Run VI 1 - open-> write Ref to the global reference of the file-> Run VI 2 - read global file reference-> playback control function / writing-> error-63195) or when I have run in the same sequence TestStand but together with station for execution options.  Maybe I need to change the TestStand sequence to load all the modules at startup?

  Why the reference becomes lost when global failover between development and execution and why labview cannot drop keep the reference stored?  Is there a work around?

  Finally found a solution.  I do not understand why it is necessary during the reading of the FPGA and not what writing (in fact I do not understand why it worked at all) but I ended up changing the properties of the step in my TestStand sequence for the step calling my DTL_READ.vi to be properties-> Run Options-> Unload Option-> "Unload after executing the step.  That seemed to do the trick to get my test TestStand sequence to work in runtime.

  I still don't understand why this was not required when you run the same sequence in the design environment and why it is not when I call my DTL_WRITE.vi.

  The DTL_READ.vi and the DTL_WRITE.vi pass the parameter labveiw global.vi 'Reference FPGA VI"of a node in read/write.  I don't know if the root of the problem is in my host TestStand and LabView FPGA VI...

  Thanks for all suggestions from you guys!  I'm happy I work but I am still confused by the solution.

• Questions after the BIOS updates and driver - place 11 pro

  Hi all

  I am owner of a place of reference dell 11 7140 model 10 64-bit windows running and about 5 days ago I installed the latest drivers and the latest version of the BIOS using the automatic detection of the dell support page www.dell.com/.../drivers printer driver

  Since then, I met the two following questions:

  1: the automatic detection of the dell driver no longer works

  2: the system does not detect when a headset is connected, the audio always comes out the speakers Tablet - I reinstalled the latest drivers, but made no difference

  I wonder if anyone else has experienced those problems and what measures have you taken to solve problems.

  Thank you

  I managed to solve the problem with the audio: it was caused by an incorrect realtek driver installatiion, for some reason any 'Realtek Audio Manager' was not loaded when you start and that's why the system doesn't detect the status of the audio input jack.

  Always have the question of the automatic recognition of the driver, but at least I have a tablet of new work!